tour used for sale

USED TOURNAIRE NUTSCHE FILTER 0.23 M2 STAINLESS STEEL REF.: C4751 General characteristics: Manufactured by TOURNAIRE Material Stainless steel Year built 1999 Technical characteristics: Capacity Cuerpo: 120 L Technical characteristics: Work pressure -1/+3 bar Work temperature -20/+150 ºC Filtration area 0.23 m2

Documents installation-drawing.pdf Technical information Physico-chemical separation / distillation unit. Year: 2015 Installation ATEX 3G IIBT4, inside the installation: zone 1G Operating mode: continuous - batch - semi-batch. Pressure: Vacuum - 3 barg max Boiler size: 50 Litres (Possible 200 Litres) Flow rates: Approximately 180 Kg/hr feeding a water/ethanol mixture (90/10) at atmospheric pressure with a reflux rate of 5. Theoretical number of trays: 20 --> Possible feeding in 3 points: 4 structured packing beds, 4 liquid redistributors (3 with recenters) Dimensions: Unit made as a skid, in hot-dip galvanised steel frame with dimensions 2400 x2400 x 4000MM high. Utilities / sources : Steam: 3 bar eff 143?C 30 to 80kg/h Cold water 25-30?C : 2-5m3/h Chilled water 5-10?C : 0.5m3/h Compressed air : 6bar eff Nitrogen inerting : 4.5 bar eff Electri ...

General SKU201K006 LocationBarneveld MakeTourell Ltd. Cornwall No.3/1764/1 Year of construction1964 Main Features MaterialStainless steel Inlet diameter1200 mm Specified Features - Coating pan MaterialStainless steel Coating pan(1x) Pan diameter1200mm Pan depth700mm In-/Outletdia. 595mm Motorcheck Information Floorspace1,8x1,2 M Total height1,8 M Weight560 KGCoating pansTourellCoating pans > Coating pansBrand > Tourell What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Description: Year of Manufacture: 1985 Serial Number: 4.110 Chassis Number: 85440E06 Engine Number: 85440E06 Chassis Weight: 820 kg Max Total Weight: 2000 kg Drive: Electric motor Max Speed: 20 km/h Transmission: Automatic (Forward, Reverse) Microphone connections available with connection to PHILLIPS speakers Last Maintenance: 13th March 2020 Charger: HOPPECKE Trak/Charger HF Premium Lighting: Front and rear, beacon lights and indicators Serial number: 4.110 Approx. Onsite Dimension. (l x w x h): 10,000 x 2,500 x 2,500 mm, weight approx.: 820 kg

Description: Mileage: 40889 Displacement: 583 cm³ Rated power: 37/8000 kW/1/min Fuel type: Petrol With vehicle registration document and vehicle license Vehicle is not registered Color: red/black Approx. Onsite Dimension. (l x w x h): 2,200 x 1,100 x 1,300 mm, weight approx.: 250 kg

- Punching capacity: 300 KN - Area of work without replacement: 750 x 1250 - Area working with replacement: 750 x 2500 - Maximum thickness of material: 6 mm - Number of strokes per minute: 165 - Total weight of machine: 3920 kg - Machine dimensions (W x L x H): 2800 x 2260 x 1800 - Maximum pressure: 300 KN - Y axis stroke with multitool: 1000 mm - Y axis strike in monopunch: 800 mm - X axis stroke: 1250 mm - Automatic repositioning: Up to 10,000 mm - Y axis speed: 30 m / min - 1250 X axis speed: 40 m / min - 2000 X axis speed: 50 m / min - Speed X + Y 1250 tour: 50 m / min - Speed X + Y 2000 tour: 60 m / min - Maximum weight of the sheetmetal: 80 Kg

Description: For sale is a complete Hardening Shop with three Gas Carburising furnaces , two Tempering Air Circulation Furnaces , a Quenching Basin and a Washing Machine . For an overall impression, please take a look at the 3D tour. In the tour you can explore the hall over two floors: LINK TO THE HARDENING PLANT Brief description of the system components 3 x GAS COOLING FURNACE TYPE VCE 200/200 as electrically heated shaft furnace Furnace temperature max.: 1000° C Batch temperature max.: 950° C Batch weight max.: 18 tonnes Useful diameter: 2000 mm Effective height: 2000 mm Clearance diameter of guide cylinder: 2000 mm Oven housing diameter x height: 3450 x 3230 mm Oven connected load: 4 zones of 80 kW each = 320 kW 2 x AIR CIRCULATION FURNACE / TEMPERING FURNACE TYPE LUO 200/200 as electrically heated shaft furnace Oven temperature max.: 750° C Batch temperatu ...

Guelleveredler Hamo Built in approximately 1981 Length approx. v. 4 m to 6 m Condition as new stock items without operational use: Hamo Guelleveredler for it serves to prepare the manure so that these valuable natural fertilizer specifically can be to the vegetation. Improve d. Duengewertes d. Guelleals Can be used also if necessary for better preparation for BIO-gas plants. Equipment Guellerohr with air inlet valve, agitator, 3 KW drive motor,. Time switch control-various fasteners, small parts. By mixing through (homogenisation) of manure evenly density and quality. Per minute 3 cubic metres of liquid manure We have about 15 PCs various sizes in stock, sale as long as d. stock enough without warranty of any tour at any time by appointment possible in the camp PROVIDER Machinery die GmbH 94094 Rotthalmünster, Germany registered since 2010 151 listings o ...

100,000 litres of fire-fighting water tank - water tank - underground tank for underground storage, outside with bituminous insulation - needed - the container is emptied, cleaned and was factory-provided by us with a bitumen exterior painting Tank capacity: 100,000 litres / 100 m³ Length: approximately 15,750 mm Diameter: approx. 2,900 mm Weight approx. 11,600 kg Material: Material steel S 235 JRG 2 is a low-cost delivery with own trucks. Simply tell us the place of delivery, will receive the exact freight costs immediately. A tour is at any time possible by appointment only. If you need any more information, just give us a call or send us an email to info@barth-tank.de. Trade-in and purchase of tanks/containers is possible to do this, just talk it over us. As the European market leader, we maintain a large stock of over 3,000 above-ground and underground storage  ...

Lathe and various small parts Manufacturer: Eugene of white Type: DLNE Year of construction: 1954 Top width: 2000 mm Bed width: 380 mm Bed length: 3410 mm Outer dimensions: 3,850 x 1,020 x 1.135 mm Net weight: approx. 2500 kg maximum speed: 935 RPM maximum speed faceplate: 710 RPM Tour is possible upon request.

We sell a stone press for laboratory purposes. The press is in the very good clean condition. The press is however without control and without cooling unit. Stones can be pushed down with the stone press (breaking load tested). The machine is vorführbar on a tour. Also she has been tested every year!

The machine includes a large number of tools and spare parts - a list on request. The technical documentation in CZ / EN / DE language is a matter of course. Tour possible by prior arrangement.

Year of manufacture 1999 regularly maintained the possibility of a tour. video available

the machine is in operation and has been used minimally tour possible video available

tour cazeneuve cnc 2 Order num very clean to be restarted price on request

The machine is in good technical condition. Clamping surface of the table: 1760x500 mm Steering system: Heidenhain 17K011 Tool changer: automatic - 36 tools Max. workpiece weight: 600 kg Clamping system: DIN69871-A SK40 Number of revolutions: 40-8000 Machine dimensions: approx. 3800x2900x3100 mm Machine weight: 9500 kg By prior arrangement, the possibility of a tour in progress.

The machine is in good technical condition. Working spindle diameter: 100m Clamping surface of the table: 1000x1120 By prior arrangement, the possibility of a tour in progress.

The machine is in good technical condition. Working spindle diameter: 80mm Table dimensions: 900x1120mm By prior arrangement, the possibility of a tour in progress.

in good technical condition. Working spindle diameter: 100m Clamping surface of the table: 1000x1120 A tour is possible by prior arrangement.

Type: SR 1600/10000 Location: Czech Republic tour possible good condition

The machine is in good technical condition. Spindle passage: 42mm Counterspindle Lots of accessories included - collets, counterspindle jaws, double sided tool holders, some spare parts. Original technical documentation for the machine (instructions, diagrams, etc.) Bar feeder included. By prior arrangement, the possibility of a tour in progress.

The machine is in good technical condition. Machine parameters: Table size 4800mm x 1050mm. Travel axes X/Y/Z 4000mm, 990mm, 1300mm Engine power 22/26KW. By prior arrangement, the possibility of a tour in progress.

The saw is in good technical condition. Machine weight 780 kg By prior arrangement, the possibility of a tour in progress.

The machine is in good technical condition. Forming force: 80t Max. sheet length: 2600mm Weight: 5500kg Dimensions LxWxH: 2900 x 2150 x 2700mm Upon prior agreement, the possibility of a tour in progress.

Description: The machine is in good technical condition. Pressing force: 160 t Maximum sheet length: 3200 mm Accessories: Upper split tool, lower bar. Weight: 10500kg By prior arrangement, the possibility of a tour in progress.

The machine is in good technical condition. Nominal forming force: 160t Folding length 3100 mm 4 controlled axes Control system: DELEM DR-65W Safety barrier. By prior arrangement, the possibility of a tour in progress.

The machine is in good technical condition. Max. sheet length: 2050 mm Max. sheet thickness: 4 mm By prior arrangement, the possibility of a tour in progress.

Cutter Kilia 5000 Express 500 liters vacuum cooking fast cutter, knife shaft with 6 fixed programmed speeds, 4 forward and 2 backward, infinitely variable bowl drive, electronic thermometer, electronic tour counter, hydraulic noise protection cover, hydraulic knife cover, hydraulic ejector, knife head 8-piece, separate control cabinet made of stainless steel

The machine is in good technical condition. Press force 30 tons (300 kN) Sheet format 1250×2500 (processing of flat bars up to 6000 mm) RS: Siemens By prior arrangement, the possibility of a tour in progress.

The machine is in good technical condition. Length of bent sheet: 2500mm Thickness of bent sheet: 2.5mm. By prior arrangement, the possibility of a tour in progress.

The machine is in good technical condition. Max. length of cut sheet: 3000mm Max. thickness of cut sheet: 12mm Dimensions LxWxH: 3600 x 1600 x 1900mm Weight: 8300kg By prior arrangement, the possibility of a tour in progress.

Winding machine croissant winding machine Model: HWM 50 R for all poles such as Kornspitz, pretzel and pretzel sticks etc. Universal - Winding machine with inlet belt with return guide / 1 man operation for all doughs for wrapping Cone winding machine with 500 mm bandwidth Dough insert approx. 20 to 400 g Edelstahaus guided tour DGUV V3 tested Machine mobile Connection 400V, 16A-CEE plug NEW Machine with 12 months warranty

The punching center is in good technical condition. Pressing force: 30t Fabriwin toolkit and software included By prior arrangement, the possibility of a tour in progress.

The machine is in good technical condition, regularly serviced. Nominal forming force: 320t Sheet length: 3100mm Only 750 hours of ram run. A set of top tools included. By prior arrangement, the possibility of a tour in progress.

The die cutting machine is in good technical condition. Pressing force: 30t Max. sheet size: 1000 x 2000mm By prior arrangement, the possibility of a tour in progress.

well-maintained 40 litre cutter completely in stainless steel, digital control, 2 tour, noise protection cover, 6-seater cutter head, integrated control cabinet

The machine is in perfect condition. - max. length of bent sheet: 2500 mm - max. thickness of black sheet: 3 mm - pressure stroke: 50 mm - groove depth: 210 mm - min. back bend (1/2 capacity): 25 mm - max. bending angle: 135 ° - bend cover adjustment: 20 mm - rear stop range: 762 mm - segment knife - weight 2000kg By prior arrangement, the possibility of a tour in progress.

Talladora de fresa madre PFAUTER PA 210, Ø max. gear: 430 mm, Module: 8, Hobbing length: 275 mm, Brand cnc: SIEMENS, Cone milling spindle: MORSE 5, Hob spindle speeds: Max 550 r.p.m., Maximum inclination: +/- 40º, Maximum length tool: 228 mm, Maximum ø of tool: 163 mm, Minimum number milling teeth: 4, Number of axles cnc: 4 (Z, X, B and C), Tangential tour: 170 mm, Ø hole table: 90 mm, Ø table: 240 mm, Axial power motor (z): 13 Nm, Radial power motor (x): 13 Nm., Motor power table (c): 20 Nm., Power tool motor (b): 12 Kw, Total power: 36Kw, Voltage: 220/380 V, High: 3.085 mm, Long: 5.970 mm, Weight: 3.085 mm, Width: 2.940 mm

Round tour with a trolley DRECKSHAGE TAG-16-S 1 Trolley: 84 x 53 mm Round guide: Ø 16 x 250 mm used, tested ! Dimensions: 250 x 465 x 42 mm

Round tour with 2 cars DRECKSHAGE 2 x TAG-30-SV ( 2xTAG-30-SV ) 2 trolleys: 152 x 67 mm round guide: Ø 30 x 1245 mm used, tested ! Dimensions: 1245 x 97 x 70 mm

Round tour with 2 cars DRECKSHAGE 2x AG-OP-25-SV ( 2xAG-OP-25-SV ) 2 trolleys: 78 x 67 mm Round guide: Ø 25 x 2240 mm used, tested ! Dimensions: 2240 x 90 x 70 mm

The machine is in good technical condition. Max. length of bent material: 2050mm Max. strength of bent material: 4mm 7.5 - 2.2KW Weight: 4050kg By prior arrangement, the possibility of a tour in progress.

The machine is in good technical condition. Working spindle diameter: 90mm Transverse table adjustment: 1120mm accessories for the machine include a column crane A tour is possible by prior arrangement.

The machine is in good technical condition. Max. grinding diameter: 605 mm Max. workpiece diameter: 630 mm Spike distance: 5000 mm Maximum workpiece weight: 3000 kg Machine weight: 18000 kg By prior arrangement, the possibility of a tour in progress.

The machine is in good technical condition. Table size 1500x3000mm + accessories for rotary burning of tubes. Source Alpha In -Pegasus 2 burners / small+large By prior arrangement, the possibility of a tour in progress.

The machine is in good technical condition. Max. length of circled sheet: 2000mm Max. thickness of circled sheet: 4mm It is fully functional and without defects. It is quiet and fairly accurate. By prior arrangement, the possibility of a tour in progress.

100% fully functional TMD - C260 video available tour possible

The machine is in good technical condition. X axis: 754mm Y axis: 500mm Z axis: 550mm Weight: 4000kg By prior arrangement, the possibility of a tour in progress.

Year of Manufacture/SO/GO: -/-/1981 The machine is in good technical condition. Max. circulating diameter: 630mm Distance between spikes: 3000mm Accessories: chuck and bezel By prior arrangement, the possibility of a tour in progress.

The machine is in good technical condition. Max. length of cut sheet: 2000mm Max. thickness of the cut sheet: 6.3 Weight: 6725 kg Upon prior agreement, the possibility of a tour in progress.