tos mas vr8a used for sale

Inv. Num. : 7325 Type: W 9 A Producer: TOS Created: 1983 Parameters: Work table length: 1000 mm Work table width: 1120 mm X-axis travel: 1250 mm Y-axis travel: 1000 mm Z-axis travel: 1400 mm

Machine status: brand new, in working condition. Year: 2021 Reason for sale: the machine doesnt perform the functions needed for our production cycle (not included in the scope and impossible to add). Ownership: Spetztekhosnastka Ltd., Ukraine Detailed machine specifications will be provided on request.

Tos SUI-50 Ø 500 x 1500 mm Distance between centers: 1500 mm Swing over bed: 500 mm Swing over cross-slide: 320 mm Swing in gap: 560 mm Diametre of main spindle bore: 55 mm Power on main spindle: 7,5 kW Number of speeds: 14 > 2240 rpm Length: 2900 mm Width : 1280 mm Height: 1450 mm Weight: 3 ton Steady(s) (fixed): 1x

Description: Tool holder: SK 40 Spindle speed: 315 - 2000 rpm Table dimensions: 700 x 300 mm With 6 grooves and an attached machine vice Jaw width: 125 mm Travel distances: X: approx. 400 mm Y: approx. 300 mm Z: approx. 300 mm The machine is equipped with a three-axis digital display weight approx.: 750 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 1,500 x 2,000 mm

Lathe SUS 63/3500 TOS with fixed steady

Double shaft multi-saw TOS SVITAVY PWR 402 440/200 - year of production 2005 - DTR documentation - Czech production track width 440 mm cutting height 55 mm - 200 mm disc diameter 350 mm 22 and 30 kW main engines 3 kW feed motor feed speed adjustable on the inverter the top five pinch rollers lower auxiliary roller five rows of pawls electric cutting height adjustment electric shaft height adjustment automatic central lubrication rollers diameter 60 mm, wedge 18 mm sleeve diameter 80 mm wedge 13 mm sleeve length 43 cm spigot diameter 200 mm transport dimensions (length / width / height) 280/245/230 cm weight 4770 kg

cutting width 350 mm cutting height 120 mm engine power 30 kW max. blade diameter 400 mm feed continuously adjustable up to 60 m / min spindle diameter 60 mm sleeve diameter 80 mm table top dimensions 960 x 2100 mm max. workpiece width 550 mm min. workpiece length 800 mm three rows of pawls two top rollers stub diameter 2 x 150 mm dimensions of the machine (length / width / height) 250/245/220 cm weight ~ 1800 kg

track width 440 mm cutting height 55 mm - 200 mm disc diameter 320 mm 2 x 75 kW main engines 3 kW feed motor feed speed adjustable on the inverter up to 60 m / min the top five pinch rollers lower auxiliary roller five rows of pawls electric cutting height adjustment electric shaft height adjustment automatic central lubrication rollers diameter 60 mm, wedge 18 mm sleeve diameter 80 mm wedge 13 mm sleeve length 440 mm spigot diameter 200 mm transport dimensions (length / width / height) 280/245/230 cm weight 5120 kg Multirip saws are machines used in the wood industry mainly for cutting piles, but not only. Machines of this type can cut boards into smaller elements and cut lamellas. The principle of their operation is very simple, the machine has a spindle located in a central point on the horizontal axis, on which tools in the form of discs are installed. Depend ...

Multisaw TOS SVITAVY PKSN 32A 350/120 – Czech production cutting width 350 mm cutting height 120 mm engine power 30 kW max. disc diameter 400 mm feed smoothly adjustable up to 60 m/min spindle diameter 60 mm sleeve diameter 80 mm table top size 960 x 2100 mm max. element width 550 mm min. element length 800 mm three rows of pawls two top rollers spigot diameter 2 x 150 mm machine dimensions (length/width/height) 250 / 245 / 220 cm weight ~ 1800 kg

Double shaft multisaw TOS SVITAVY PWR 402 440/200 – year of manufacture 2005 – technical documentation – Czech production track width 440 mm cutting height 55 mm - 200 mm disc diameter 350 mm main engines 2 x 55 kW feed motor 3 kW feed speed adjustable on a gear motor five upper pressure rollers lower auxiliary roller five rows of pawls electric cutting height adjustment electric shaft height adjustment automatic central lubrication shaft diameter 60 mm wedge 18 mm sleeve diameter 80 mm wedge 13 mm sleeve length 43 cm spigot diameter 200 mm transport dimensions (length / width / height) 280 / 245 / 230 cm weight 4770 kg Multisaws are machines used in the wood industry mainly for cutting prisms, but not only. Machines of this type can cut boards into smaller elements and cut lamellas. The principle of their operation is very simple, the machine has a spindle ...

Toshiba IS 450 GSW injection molding machine Year of production - 2007 Parameters: Closing force: 4,410 kN Screw diameter: 70 mm Injection volume: 1480 cm³ Shot weight: 1360 g Min.height of the fastening plate: 1230 mm Min.width of the fastening plate: 1230 mm The distance between the columns - 870X870 mm Ejector force: 243 kN Ejector stroke length: 1050 mm Maximum injection pressure: 178 MPa Oil tank capacity - 1500 liters Machine length: 7600 mm Machine width: 2200 mm Machine height: 2100 mm Injection weight: 22,000 kg Machine with a robot and a cage

Manufacturer / type Toshiba IS650GTW i59 Closing force [tons] 650 Year of production 2007 Screw diameter [mm] 95 Number of aggregates 1 type of screw Type: 95DBG-AT, Part # F049997, Stellite12 The minimum height of the mold [mm] 450.0 weight [kg] 32100 installed power kW 101.2 thermal insulation on the aggregate - blanket on the aggregate upper / lower YES nominal power of heaters for units KW 43.95 length mm 7940 width mm 2670 height mm 2300 occupied area of 21.2 m² occupied area with a cage 32.0 m² hydraulic pump 1 SQP43-50 hydraulic pump 2 SQP43-50 MC09 robot (W 733-0610)

Description: The machine is in good technical condition. Working spindle diameter: 110mm Table clamping surface: 1250 x 1250mm Machine dimensions lxwxh, 5290x4063 mm. Machine weight, 27000 kg By prior arrangement, the possibility of a tour in progress.

Type: VSP 50 CNC Parameters: 11750 mm, 2000 mm Manufacturer: Tos Description: The machine is in good technical condition, after agreement the possibility of testing. Main dimensions maximum and smallest distance of the spindle axis from the stand guide: -version without tool magazine 2500/500 mm -version with tool magazine 2500/600 mm maximum and smallest spindle end distance: -from bed guide 1480/380 mm -from the base of the machine 1860/760 mm headstock adjustment 2000 mm adjustment of the headstock on a machine with a tool magazine 1900 mm arm adjustment 800 mm Sleigh adjustment: -version with one bed 1000 mm -version with two beds 4500 mm -version with three beds 8000 mm -version with four beds 11500 mm Maximum drilling diameters: diameter of drilling fully into steel with a strength of 600 MPa 50 mm diameter of drilling completely into cast iron with a strength o ...

Location: Czech Republic Description: Working spindle diameter 100 mm X-axis travel 1250 mm Travel of the Y axis 1100 mm Spindle speed 10 - 1200 /min. Central cooling does not Spindle extension (W) 630 mm Z axis travel 970 mm The toolbox does not Spindle clamping cone ISO 50. Power of the main electric motor 22 kW Table clamping surface 1000 x 1120 mm Max. workpiece weight 3000 kg Dimensions L x W x H 4746 x 3000 x 3340 mm Machine weight 13700 kg

Working spindle diameter: 75mm Table clamping surface: 950x950mm Digital measuring X-axis travel 1,250 mm Y-axis travel 900 mm Z-axis travel 1,060 mm Spindle speed 18 - 1800 /min. Spindle extension (W) 560 mm Power of the main electric motor 11 kW Max. table load 3,000 kg Dimensions LxWxH 4500 x 3400 x2800 mm Machine weight 10t Inspection possible upon agreement. Accessories: support column

Machine weight: 38000 kg Working spindle diameter: 130 mm Spindle taper: ISO 50 Spindle speed: 1800 rpm Table clamping surface: 1800 x 1600 mm Transverse table movement - x axis: 3500 mm Longitudinal table movement - z axis: 2000 mm Vertical table movement - y axis: 2500 mm

The machine is in good technical condition. Table working area: 950 x 950 mm Maximum table load: 3000 kg Maximum tool speed: 1800 rpm X-axis travel: 1250 mm Y-axis travel: 900 mm Z-axis travel: 1000 mm Spindle extension W: 560 mm Po by prior arrangement, the possibility of a tour in progress.

Clamping surface of the table: 2500x1800 mm Longitudinal movement of the table - x-axis: 3000 mm Transverse table movement - y axis: 1800 mm Vertical movement of the table - z axis: 1600 mm Spindle speed: 6000 rpm Chip conveyor:: Yes Internal cooling: : Yes Number of spindles:: 1

The machine is in good technical condition, control system HEIDENHAIN 310. With circular interpolation. A tour is possible upon agreement. Basic parameters 100 mm; 1000 x 1120 mm Machine weight: 13400 kg Total power of the machine:: 20 kW Diameter of the working spindle: 100 mm Spindle taper: ISO 50 Spindle speed: 4 - 1400 rpm Table clamping surface: 1000 x 1120 mm

Type: H 100A Parameters: 100 mm, 1250 mm Manufacturer: Tos Year of production / SO / GO: 1970 / - / 2004 Description: Machine in good technical condition. Possibility of testing after agreement. Working Spindle Diameter 100 Mm Iso 50 Spindle Taper Table Clamping Area 1250 X 1250 Mm Max. Workpiece weight 3000 Kg Longitudinal Table Movement - X Axis 1250 Mm Transverse Table Movement - Z Axis 1250 Mm Vertical Table Movement - Y Axis 1120 Mm

Weight of the machine: 32000 kg Total power of the machine:: 37 kW Working spindle diameter: 130 mm Cross table movement - x axis: 2000 mm Vertical table movement - y axis: 2500 mm Machine dimensions LxWxH: 7480x6300x4800 mm

The WHN 13.8B CNC boring machine is in good technical condition, HEIDENHAIN control system. The year of GO 2001 Total machine input:: 37 kW Working spindle diameter: 130 mm Spindle taper: ISO 50 Spindle speed: 2500 rpm Clamping surface of the table: 1800x2200 mm Transverse movement of the table - x-axis: 3500 mm Longitudinal movement of the table - z axis: 1200 mm Vertical table movement - y axis: 2500 mm

WH 105 CNC with Heidenhain iTNC 530 control system is in good technical condition. By agreement, it is possible to see it in operation. AME brand belt filter system with PS50 belt filter attachment, belt skimmer with conveyor belt, micro aerator type 300, lifting system, pump for feeding the machine, external cooling 3 bar, 40 l/min and internal cooling 20 bar with container for coolant 1000 l. Standard chip conveyor for x 1800mm with stepped grate from AME. Spindle speed: max 3300 rpm Transverse movement of the table - x-axis: 1800 mm Longitudinal movement of the table - z axis: 1250 mm Vertical table movement - y axis: 1600 mm Turntable: : 1400x1600 mm B: 360°

Year of Manufacture/SO/GO: 1987/-/2001 Description: The machine is in very good technical condition, dismantled, stored in storage. 5 persons X (table lift) 5000 mm Y (vertical lift of headstock) 2000 mm Z (longitudinal displacement of the column) 1250 mm W (spindle travel) 800 mm Engine power: 37 kW Spindle speed range: 1.25-900 rpm Rapid feed: 4000 mm/min Spindle diameter: 130 mm Table: 1800 x 1800 mm Machine weight: 12000 kg Spindle taper: ISO 50. control system HEIDENHAIN

Inv. number: 108183 Type: SV 18R/1250 Parameters: 380 mm, 1250 mm Manufacturer: Thos Year of Manufacture/SO/GO: 1962/-/- Location: Czech Republic Description: The machine is in good technical condition, it is possible to inspect it in operation by agreement. Accessories: 4 x 160 flange, 1 x 200 flange, 2 x chuck, face plate, drive plate, knife clamp, fixed + movable bezel, jaws, chuck cover and more. Circulating diameter above the bed: 380mm Distance between spikes: 1250mm Circulating diameter above the support: 215 mm Power of the main electric motor: 6 kW LxWxH: 3020x950x1210 mm Machine weight: 1910 kg.

total machine input: 6.5 kW - main spindle motor - power: 7.2 kW MAXIMUM DIMENSIONS OF THE WORKPIECE: - rotating length: 1250 mm - diameter on the bed: 380 mm - diameter above the support: 215 mm - weight: 250 kg spindle: - inner cone: SK50 - maximum speed: 2800 rpm - chuck diameter: 250 mm MACHINE DIMENSIONS: - weight: 1.9 tons - height: 1210 mm - width: 950 mm - length: 3020 mm Machine in good technical condition , by agreement the possibility of a trial.

Point lathe SN 55 / 4000 in good technical condition, including lunette. Total machine input:: 7.5 kW Circulating diameter above the bed: 550 mm Revolving diameter above support: 310 mm Distance between spikes: 4000 mm Spindle drilling: 71 mm Spindle speed - range: 90-1000 Working feed - number of steps: 16 Working feed - range: 38 mm/min

Total machine input:: 83 kW Clamping plate diameter: 2400 mm Max. workpiece diameter: 2600 mm Max. workpiece height: 1600 mm Max. workpiece weight: 15000 kg

We hereby offer this used TOS Sua 125 CNC lathe from 2011, located in Finland. Equipped with an advanced Fagor 8055 control unit, this machine ensures precise and efficient operations. With a substantial turning length of 1920 mm, it caters to a diverse range of metalworking tasks. The low-speed 630 rpm spindle, coupled with a robust 37 kW motor, guarantees powerful and accurate machining. Invest in this reliable CNC lathe to enhance your production processes, delivering exceptional results with every project. Technical specifications: Year: 2011 Made in: Czech Republic Control unit: Fagor 8055 Turning diameter: 1250 mm Turning length: 1920 mm Swing over carriage: 930 mm Distance between centers: 2000 mm Height above bed. 625 mm Cutting force: 10000 N Spindle speed: 4 - 630 rpm Spindle bore: 128 mm Spindle nose: ČSN ISO 702/II Motor power: 37 kW Dimensions: Length: 5 ...

Year of manufacture/SO/GO: 1988/-/2000 Table clamping dimensions - width x length 400x1400mm Maximum workpiece weight 800kg Working stroke - longitudinal, transverse, vertical 1000x400x400mm Conical cavity in the spindle ISO 150 Range of revolutions in the spindle - 18 degrees - manual 35-1800rpm-1 Working feeds - 16 degrees - longitudinal 10-1800mm.min-1 - transverse 10-1800mm.min-1 - vertical 2.5-450mm.min-1 Longitudinal rapid traverse 4000mm.min-1 - transverse 4000mm.min-1 - vertical 1000mm.min-1 Spindle electric motor - power 7.5kW Dimensions LxWxH 3180x3310x2400mm Weight including switchboard 4400kg.

Type: FGS 63B CNC Parameters: 630 mm, 2000 mm Manufacturer: Tos Year of production / SO / GO: 1999 / - / - Description: The machine is in good technical condition, after agreement the possibility of testing. TNC426 control system. Technical parameters: Working range - travels: X-axis: 1250 mm Y axis: 850 mm Z axis: 500 mm Max. table load: 1000 kg Table clamping area: 630 x 1600 mm Working feed: X-axis: 1 - 40,000 mm / min Y axis: 1 - 4000 mm / min Z axis: 1 - 2000 mm / min

The machine is in good technical condition, testing possible upon agreement. Revolving diameter mm 160 Center distance mm 250 Grinding wheel: diameter x hole x width mm 250 x 76 x 20 The largest width of the grinding wheel mm 40 Cone of the working spindle Morse 3 Cone in the tip socket of the tailstock Morse 2 Diameter of the three-jaw chuck mm 80 Rotation of the grinding spindle number of degrees 60 Rotation of the working spindle number of degrees 90 Rotation of the table on both sides number of degrees 10 Speed ​​of the grinding spindle min - 1 2420.3290 The largest longitudinal movement of the table mm 290 The smallest longitudinal movement of the table mm 1 Transverse movement of the grinding spindle mm 100 Quick adjustment of the grinding spindle mm 16 Total machine power kW 2.5 Maximum weight of the workpiece kg 10 Floor plan of the machine: length x width mm 1900 x 1100 Weig ...

The machine is in good technical condition, after prior agreement the possibility of testing. Longitudinal table movement - axis x 1000 mm Transverse table movement - z axis 320 mm Vertical table movement - y axis 350 mm Grinding spindle speed 2280, 2600 rpm Max. workpiece weight 280 kg machine weight 3200 kg

The machine is in good technical condition, it is possible to test it by agreement. Max. grinding diameter: 280 mm Max. grinding length: 630 mm Max. workpiece weight: 65 kg Longitudinal feed: 760 mm Power of the main electric motor: 4 kW Dimensions lxw: 2800x1600 mm Machine weight: 2250 kg. cooling, magnetic separator, dresser holder in tailpiece, 2 x flange with disc, balance mandrel, closed and open bezels are from another machine and must be adapted, internal grinding with fortune, mandrels for internal grinding, protective covers against cooling emulsion, replaced hydraulic oil, hydraulic circuit fully functional without oil leakage, mechanical condition very good, no play on the working headstock, the distributor is outside the machine.

The machine is in good technical condition, after prior agreement the possibility of testing. Max. grinding length 1,000 mm Max. height of ground object with new discs (from the table) 350 mm Longitudinal table movement 1,060 mm Transverse table movement 350 mm Vertical movement of the grinding headstock 400 mm Distance of the spindle axis from the table clamping surface min. 75 mm, max. 475 mm Vertical cutting feed - 1 scale division 0.001 mm Grinding wheel (ø x width x hole ø) 250 x 25 x 76 mm Grinding wheel speed ø 250 mm 2,522 min-1 Partially worn grinding wheel speed 3 319 min-1 Grinding headstock motor power 3 kW Machine dimensions Machine floor area approx. 4,100 x 2,000 mm Machine height 2,125 mm Machine weight 3,400 kg Electrical equipment Total machine power 9.3 kVA Accessories Magnetic clamping plate 300 x 1,000 mm , height 100 mm

Inv. Num. : 7242 Type: MC 100V Producer: TOS Trenčín Created: 1997 Parameters: Control system: Heidenhain Work table length: 1080 mm Work table width: 579 mm Maximum spindle speed: 8000 1/min X-axis travel: 1016 mm Y-axis travel: 610 mm Z-axis travel: 508 mm Tool magazine capacity: 40 Machine weight: 6000 kg

Inv. Num. : 7268 Type: WFN 180 HSQ Producer: TOS Created: 2001 Parameters: Control system: Heidenhain 430 m Shrek Operating hours: 110727 h Maximum spindle speed: 24000 1/min X-axis travel: 2500 mm Y-axis travel: 2000 mm Z-axis travel: 1240 mm

Inv. Num. : 7270 Type: WHN 13.8 CNC Producer: TOS Created: 1996 Parameters: Control system: Heidenhain 426 C Hours: 145790 h Maximum spindle speed: 1500 1/min X-axis travel: 3500 mm Y-axis travel: 2000 mm Z-axis travel: 1250 mm W-axis travel: 800 mm B-axis: 1600 x 1800 mm

Inv. Num. : 6681 Type: SUS 63/5000 Producer: TOS Generated: Parameters: Maximum turning length: 5000 mm Maximum turning diameter over bed: 655 mm Maximum turning diameter over support: 390 mm Spindle diameter: 82 mm Equipment: Chuck Grasshopper Digital Measurement Knife Fixed bezel Movable bezel

Inv. Num. : 6528 Type: WH 80 Producer: TOS Created: 1966 Parameters: Spindle diameter: 80 mm Cone: Morse 5 Equipment: DRO Vice Dörne Console (1000 x 500) The machine is in good technical condition.

Roll grinding machine TOS BEV 100/6000 for refurbishment.

Inv. Num. : 5851 Type: IS 280 GS Producer: TOSHIBA Created: 1996 Parameters: Operating hours: 24,593 h Total number of injections: 7,410,962 Clamping force: 2774 kN Screw diameter: 60 mm Injection capacity: 930 cc Injection mass: 855 g Min. height of the clamping plate: 900 mm Min. width of clamping plate: 900 mm Distance between uprights (horizontal): 610 mm Distance between uprights (vertical): 610 mm Ejection force: 152 kN Ejector stroke length: 760 mm Maximum Spray Pressure: 192 MPa Opening the mold: 1060 mm Machine length: 5900 mm Machine width: 1900 mm Machine height: 1900 mm Injection weight: 12400 kg

Inv. Num. : 7192 Type: BU 28/630 CNC Producer: TOS Created: GO 2004 Parameters: Total power requirement: 10 kVA Maximum grinding length: 630 mm Tip stroke: 140 mm Maximum weight of the workpiece: 65 kg Distance between tips: 630 mm Machine height: 1600 mm Machine length: 3750 mm Machine width: 2300 mm Machine weight: 3000 kg

Inv. Num. : 5833 Type: FKH 50 Producer: TOS Created: 1987, GO 2017 Parameters: Control system: Brázdil Operating hours: 500 h Maximum spindle speed: 1800 1/min X-axis travel: 940 mm Y-axis travel: 940 mm Z-axis travel: 470 mm Spindle power: 7.5 kW Tool holder: ISO 50 Accuracy: 0.02 mm Spindle extension: 120 mm Machine height: 3200 mm Machine length: 2800 mm Machine width: 2600 mm Equipment: Support plates Grips Complete overhaul carried out

Lead & Pull Screw Lathe TOS SV 18 RA Year of construction approx. 1980 The machine is in good used condition and works perfectly. Transport or delivery can be arranged. Of course, loading technology is available at the time of collection. Specifications: Center height 180 mm Circumferential diameter over bed 380 mm Circulation diameter over support 215 mm Center width 1000 mm Spindle bore 41 mm Speed range 14 - 2800 rpm. Longitudinal feeds 0.02 - 5.6 mm/rev Feeds flat 0.01 - 2.8 mm/rev metric pitches 0.2 - 140 Inch thread 1/5 - 140/1" DP thread 1 - 224 DF Module thread 0.2 - 70 m Drive power 6.0 kW Dimensions approx. 2200 x 1000 x 1400 mm Weight approx. 1800 kg with -Arbor - Three-jaw lathe chuck - Moving grain tip The machine can be viewed at any time.

Key data: 3000 mm, 1800 mm, 1600 mm

Inv. Num. : 6982 Type: OPTIMA Producer: TOS Created: 2005 Parameters: Work table length: 2500 mm Work table width: 1800 mm X-axis travel: 3000 mm Y-axis travel: 1800 mm Z-axis travel: 1600 mm

Inv. Num. : 6037 Type: WH 63 Producer: TOS Created: 1970 Parameters: Work table length: 900 mm Work table width: 800 mm Cone: MORSA Equipment: Front panel Lifting device (125 kg)

Inv. Num. : 6254 Type: W75 Producer: TOS Created: 1987 Parameters: Work table length: 950 mm Work table width: 950 mm Spindle diameter: 75 mm X-axis travel: 1250 mm Y-axis travel: 900 mm Z-axis travel: 560 mm

The machine is in good technical condition. Spindle bore: 80 mm Taper: Morse 5 Equipment: Own crane Digital measurement 1000 x 500 console It was used once a year for light drilling or milling. By prior arrangement, the possibility of a tour in progress.