tos mas vr8a used for sale

tags for table feed box

Turning length : 1000mm Turning diameter above the bed : 320mm Turning diameter over support : 180mm Spindle clearance : 40mm Motor : 4 kW Three-jaw chuck fi 250mm : Dimensions (L/W/H) : 2300mm / 1150mm / 1500mm

Nice Grinder TOS Hostivar BUTE 63 x 5000 CNC Fully renovated ,Extended and CNC new in 2007 Under power

Max. working diameter: 630mm Distance between tines: 3500mm 5 lunettes fixed and movable.

Year of manufacture/SO/GO: -/-/2024 Description: Machine in good technical condition, after agreement possibility of testing.Lathe after complete overhaul.

The machine is in good technical condition, after agreement possibility of inspection in running. Power of main engine 7,5kW. Parameters: 500mm, 1500mm

Inv. Num. : 5849 Type: IS 220 GN Producer: TOSHIBA Created: 2002 Parameters: Clamping force: 2150 kN Screw diameter: 50 mm Injection capacity: 490 cm³ Injection mass: 450 g Min. height of the clamping plate: 870 mm Min. width of the clamping plate: 820 mm Distance between stands (horizontal): 610 mm Distance between stands (vertical): 560 mm Ejector force: 140 kN Ejector stroke length: 800 mm Maximum spray pressure: 201 MPa Opening the mold: 1060 mm Machine length: 5900 mm Machine width: 1340 mm Machine height: 1840 mm Spray weight: 8600 kg

The pallet is located in the middle of the machine. The ring with the film roll rotates around the load and wraps it. Since the film gripping and closing unit is attached to the ring, the winding process can begin and end at any desired height of the load. Properties: Tosa Model 125 Machine No.: 103743 Year of construction: 2010

Spindle size: dia 230 / ISO 60 X travel: 9000-25000 mm Y travel: 5000 mm Z travel: 1500 mm W travel: 1750 mm Spindle speed: 800 RPM Rotary table: - Surface: 4000 x 4000 mm - Travel: 2500 mm

grinding diameter:630 mm grinding length:3000 mm centre height:315 mm total power requirement:35 KVA weight of the machine ca.:13,3 t

Turning machine make TOS type Galanta Zyklotronic HAD 40/75Machine -No: 400507596001 Year 1996Turning length: 750 mmTop height: 230 mmCircumference diameter over bed: 400 mmCircumferential diameter over cross slide: 230 mmCircumference diameter in the offset: 460 mmSpindle mount: DIN 52027 / B 6 CamlockSpindle bore: 50.8 mmSpeed range: 20 - 3500 rpm.Feed: 0.001 - 9999 mm / min.Rapid traverse: 6.0 / 3.0 m / min.Drive power / connected load: 7.5 kW / 13 kVAWeight approx: 1760 kgOutside dimensions approx: 2100 x 1200 x 1725 mmWith- CNC control FAGOR 800 T CNC- 3-jaw chuck- revolving center point- Multifix steel holder with multiple insertsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for ...

CNC Milling Machine Fabr. TOS CELAKOVICE Type FNG 32 NCMash. -No: 7200075Table longitudinal path X: 600 mmUpper arm lateral travel Y: 400 mmTable perpendicular path Z: 400 mmSpindle mount: ISA 40stepless speeds: 10 - 3150 rpm.stepless feed rates in 3 axes: 1 - 9000 mm / min.Weight approx: 2.6 tDrive power: 10 kVAWith- CNC control Heidenhain TNC 155- rigid angle tablelittle usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

The machine is in good technical condition, after agreement possibility of inspection in running. Heidenhain control system X axis = 1016mm Y axis = 610mm Z axis = 508mm Table load: 600kg Number of tools in magazine: 40 Dimensions L x W x H: 3280 x 2260 x 2400mm Weight: 6000kg

The machine is in good technical condition. Max. diameter above bed: 1050 mm Distance between spikes: 2000 mm Diameter above transverse ram: 727 mm Max. workpiece weight: 5000 kg Spindle caliber: 102 mm Shaft motor power: 22 kW Tailstock: yes Chuck type: 3 jaws Length x width x height: 4860 × 1970 × 1500 mm Weight: 7600 kg Upon prior agreement, the possibility of inspection while in operation.

The machine is in good technical condition. Circulating diameter above the bed: 630mm Distance between points: 4000mm Accessories: chucks, lunettes weight: 3,500 kg Upon prior arrangement, the possibility of inspection while in operation. Year of manufacture/SO/GO: 1979/-/1993

Clamping surface of the table 950x3000 mm Bed length 6000 mm Table movement 2750 mm Passage between stands 1260 mm Machine weight 34 000 kg

Circulation diameter over bed ... 500mm Distance between stands ... 2000mm workpiece weight ... 600kg Circulation diameter via support ... 270mm Main engine power ... 5.5kW L x W x H ... 1100 x 3575mm Machine weight ... 1845kg complete general overhaul in 2022, CE certificate, new cover, Machine in good condition, possible to test under power.

Displacement of the X-axis: 850 mm Displacement of the Y-axis: 300 mm Displacement of the Z-axis: 420 mm Spindle holder: ISO 50 Spindle speeds: 45 - 2,000 rpm. Digital display: Heidenhain 2-axis Table size: 1200 x 320 mm Feed X and Y: 14 - 900 mm/min. Feed Z:4 - 250mm/min. Rapid traverse X and Y: 2,800 mm/min. Rapid traverse Z:800 mm/min. Equipped with: - Cooling device - Machine clamp Country of origin: Czech Republic Spindle motor: 5.5 kW Machine weight: 3,300 kg Machine LxWxH:300 x 270 x 200 cm

There are one TOS WH10 TNC and one TOS WH10 CNC available, x-travel: 1250mm, y-travel: 1100mm, z-travel: 1000mm, W-travel: 600mm, table dimensions: 1100x1000mm, with accessories, various tools, holders, spindles, cutter heads, boring heads, tool cabinets and clamping screws.

X=3500mm Y=2000mm Z=1250mm W=800mm H=360° spindle 130 mm, ISO 50, max. 1600 rpm table 1600 x 1800 mm with a load of 12000 kg with Siemens electric and CNC Heidenhain TNC 415B Oil cooled: Schimpke. Dismantled. The machine has been used very little = in very good technical condition.

Travel X/Y/Z: 850mm/500mm/450mm, speed range: 35-18000rpm with 18 steps, table dimensions X/Y: 1250mm/400mm. Control: Heidenhain TNC355, tool holder: SK40, weight: approx. 5500kg. Including an assortment of tools. Documentation available.

Working range: 1000mm/355mm, table size: 1400mm/250mm, spindle: SK50, digital display: Mitutoyo.

Motor power: 85W, weight: 1.6t.

Description Sell a very stable tool milling machine. The manufacturer is TOS. Condition used, fully functional. The machine is sold because of the closure of the production. Clamping surface table 2001000mm Longitudinal movement 650mm Transverse movement 300mm Vertical movement 420mm All 3 axes with feed and rapid traverse Feeds longitudinal, transverse 14-900 mm/min 13 steps Vertical 4-250mm/min Rapid traverse longitudinal, transverse 2800 mm/min Vertical 800 mm/min Speed range 31.5 to 1400 1/min // Staggered in 12 speed levels Coolant pump Accessories SK40 pictures about 10pcs Collets SK50 to SK40 Adapter Chuck Dimensions 1.91.72m high Weight approx. 2,5to Machine is ready for collection on a Euro pallet and can be loaded on site with forklift

Length: 5650mm, width: 2960mm, height: 1850mm, with documentation, without lifting device and roller conveyer, an inspection is possible.

Horizontal boring mill WH10NC

TOSHIBA SHIBAURA CNC VERTICAL BORING MILL with FANUC 16i-T CNC Control Control: GE Fanuc Series 16i-T Table Diameter: 117.7” (3000mm) Maximum Swing: 141.7” (3600mm) Maximum Weight on Table: 50T (2) Ram Heads L & R Z-Stroke: 48 – 375” Maximum Distance Under Rail: 126.7”(3220mm) Maximum Height under Ram: 119.2”(3030mm) Cross Rail Travel: 79.9” Vertical Ram Stroke Right: 62.9”(1600mm) Vertical Ram Stroke Left: 49.2”(1250mm) Speeds: .32 – 63 RPM Approx. Weight: 125,222 lbs  Equipped With 3000mm dia. Table / GE Fanuc 16i-T CNC Control / (2) Ram Heads

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine weight: 20,000 kg Faceplate diameter 1250 mm Number of supports: 1 pcs Dimensions: height 4250 mm width 5630 mm depth of 3550 mm Extras: copying apparatus, turret head on the vertical support Technical condition at the time of sale: Replacement rotary amplifier on thyristor converter. Not operated since 1994 p. Small repair and adjustment of electrical and mechanical parts. The maximum dimensions of a workpiece Height 1150 mm The diameter of 1400 mm Weight 8000 kg

Milling machine, universal milling machine, tool milling machine -Clamping table: 300 x 800 mm -X/Y/Z 500/285/H430 mm -Spindle mount: SK40 -Speeds: from 40 to 2000 rpm -Power supply: 8-400mm/min - Rapid traverse: 600 mm/min -Cooling unit -Dimensions: 1430/1200/H2000 mm -Weight: 1594 kg

1x Lathe Manufacturer: TOS Type : SUI 80/4000 Year of construction: 2020 Commissioning: 09.2020 Turning length: 4000mm Turning diameter over bed: 800mm Turning diameter via slide: 520mm Speed max: 14-1400rpm Through hole: 92mm Spindle bearing diameter: 140 mm Accessories: - retrofitted frequency converter, - Position indicator 3-AX Heidenhain ND7013, - Quick release head system Multifix D + holder D1D 40180 Machine condition: almost New Delivery time: March 2023

– year of manufacture 2007 – DTR documentation – Czech production – two lasers – ruler TECHNICAL PARAMETERS: track width 440 mm cutting height 55 mm – 200 mm disc diameter 320 mm main engines 2 x 75 kW feed motor 3 kW feed speed adjustable on the inverter up to 60 m/min five upper pressure rollers bottom auxiliary roller five rows of latches electric cutting height adjustment electric shaft height adjustment automatic central lubrication shaft diameter 60 mm wedge 18 mm sleeve diameter 80 mm wedge 13 mm sleeve length 440 mm connection diameter 200 mm transport dimensions (L/W/H) 280 / 245 / 230 cm weight 5120 kg

SU 125/3000 Swing over the bed 1250 mm Circular diameter above the 940 mm Tip distance 3000 mm Diameter of clamping plate 1250 mm Maximum workload of the workpiece 6000 kg Machine weight approx. 10,000 kg Delivery items of the accessories : - facing head 710 - 3-jaw chuck 630 - steady rests

BN 102 C Producer Tos Swing 280 mm Distance between centres 630 mm Cross table adjustment 250 mm Longitudinal table adjustment 510 mm Vertical milling head adjustment 290 mm Machine weight 1000 kg

Year 1993 Heidenhain 415F Parameters: ISO 40 spindle Table dimensions 800x400 mm X-axis travel 500 mm Travel of the Y axis 400 mm Z axis travel 400 mm Spindle clamping cone ISO 40. Spindle speed 10 - 3150 /min. Max. workpiece weight 300 kg Dimensions LxWxH 2800x2700x1980 mm Machine weight 2600 kg Power of the main electric motor 4.5 kW

Bohrleistung in Stahl (-Ø: 50 mm throat: 1500 mm workpiece height max.: 1380 mm Bohrleistung in Guß (-Ø: 60 mm Abstand Spindelmitte bis Säule: 320 - 1250 mm swival range +/-: 180 ° base plate surface area: 2640 x 1000 mm max. torque on the spindle: 310 Nm Bohrspindel-Ø/ Aufnahme: 75 mm /MK 5 bore spindle stroke: 310 mm spindle turning speed range: 28 - 2500 U/min feed:: 0,05 - 2 mm/U power capacity: 4 kW weight of the machine ca.: 4,3 t cube table 500 x 500 x 500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BUC63A/3000 with NC Kavalir K51 Max. diameter 630 mm The distance between the centres is 3000 mm Max workpiece weight 2500 kg Total machine input 31 kVA Machine weight ca. 15 tons

equipped with ATC = automatic toolchanger with 60 positions equipped with AVO = device for automatic pallet/table changer Transversal movement of table (X): 2000 mm Vertical movement of headstock (Y): 1250 mm / 1150 with pallet Horizontal movement of the stand (Z): 1000 mm Movement of spindle (W): 500 mm with Heidenhain measuring probe Longitudinal travel X-axe: 2000 mm Cross travel Y-axe: 1250 mm Travel Z-axe: 1000 mm Dimensions clamping space- table: 1400 x 1250 mm Power on spindle: 37 kW Admission in millinghead (ISO): ISO 50 (dia 125 mm) Max speedrange: 10 > 2800 rpm Control: Heidenhain TNC 426 Power needed (KVA): 78 kVa / 82 kW

Tos Trencin SUI 63-80 Distance between centers: 2000 mm Swing over bed: 630 mm Swing over cross-slide: 350 mm Swing in gap: 700 mm Diametre of main spindle bore: 71 mm Power on main spindle: 15 kW Number of speeds: 11 > 1800 rpm Digital screen: Heidenhain 2 axes Length: 3900 mm Width : 1250 mm Height: 1750 mm

Horizontal milling machine FKH 80

Catalog No. : 6346 Type: WHN 13 A Producer: TOS Made in: 1980 Characteristic: Control system: MEFI CNC 859 Length of the working table: 1600 mm Width of the working table: 1800 mm Maximum rotary speed of the spindle: 2800 1/min X-Axis travels: 2000 mm Y-Axis travels: 1600 mm Z-Axis travels: 1200 mm Power of the spindle: 38 kW Machine weight: 34.600 kg Replaced ball screws. Measuring each IRC axis separately. Drives separately each XYZ axis.

turning diameter over bed: 590 mm centre distance: 4000 mm turning diameter over slide rest: / mm total power requirement: / kW weight of the machine ca.: / t required space: / m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 6305 Type: SKJ 20 Produzent: TOS Erzeugt: 1982 Parametern: Tischdurchmesser: 2000 mm Maximales Werkstückgewicht: 15000 kg Max. Werkstückhöhe: 1200 mm Maximale Tischdrehzahl: 170 1/min Gewicht: 35000 kg

conus taper: . mm The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 8500 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Vertical Lathe Double Column TOS SK16 Maxi turning diameter: 1700 mm Turning height: 1250 mm Rotation: from 3,55 to 150 RPM 4-jaws chuck Ø 1620 mm Chuck crossing diameter: Ø 1620 mm Max workpiece weight: 5000 kg Left vertical slide rame stroke: 900 mm Right Vertical slide ram stroke: 600 mm (turret 5 tools) Right Horizontal slide ram stroke: 500 mm Power: 12 kW Voltage: 380 V Length: 4600 mm Width: 2800 mm (without chuck protectors) Total height in low position: 3800 mm Weight: approx 20 T

SPECIFICATIONS: Hydraulic press for bent elements Dimensions of the work table mm: 2500 x 1300 Number of pistons: 4 diameter Ø 100 mm Piston stroke mm: 1500 -Enclosure -Control box -Oil pump - 2 steam outlets

Center height: 800 mm Center distance: 3000 mm Spindle bore: 92 mm Centre latheTOS TRENS - SUI 80  Swing over bed Ø:        800mm Swing over cross slide Ø:520mm Swing in the gap Ø:      870mm DBC Turning Length:      3000mm Gap length:              320mm Spindle bore:            92mm Spindle power:           15kW Bed width:               550mm Tailstock spindle Ø:     110Ø Stroke pinole:           210mm Spindle taper:           6Mk Speeds / ranges:         3200Rpm Feed rate X-Axis:        2400mm/min. Feed rate Z-Axis:        4800mm/min. Leng ...

Inv. Num. : 5549 Type: WH 10 NC Producer: TOS Generated: 1991, GO 2016 Parameters: Control system: Heidenhain Work table length: 1120 mm Work table width: 1000 mm Maximum spindle speed: 1250 1/min Travel X-axis: 1000 mm Travel Y-axis: 900 mm Travel Z-axis: 630 mm Spindle diameter: 100 mm Machine weight: 13400 kg Equipment: Clamping angle

Drilling capacity: 130 mm Throat: 90 mm Spindle taper: 90   CNC Brand: Heidenhain CNC Model: HeidenHain TNC 355 X - Travel:              3500mm Y - Travel:              2500mm Z - Travel:              800mm W - Travel:              1250mm Table Length:            1800mm Table Width:             1600mm Table load:              12000 Speeds / ranges:         1200Rpm Power:                   37kW Spindle Taper:           50ISO/Bt/Mk Feed rate X-Axis:        6000mm/min. Feed rate Y-Axis:        6000mm ...

Type: SKD 32 B Tablediameter: 3200 mm Max load on table: 50 ton Vertical travel of cross-beam: 2100 mm 2 toolheads on cross-beam - horizontal movement of toolhead nr1: 1400 mm - vertical movement of toolhead nr1: 1500 mm - horizontal movement of toolhead nr2: 1980 mm - vertical movement of toolhead nr2: 1350 mm - swivelangle of tooldhead: -/+ 30° Chuck dia.: 3200 mm Max turningdia -- passage: 3500 mm Power on the spindle: 120 kW Command: Siemens 840D Number of speeds: 1 > 22 rpm / 22 > 80 rpm Power needed: 195 kVa Long : 10045 mm Wide: 8120 mm Height: 7155 mm Weight: 65 ton