tos mas vr8a used for sale

Heidenhain TNC 124 Universal table 630x400 mm Spindle speed 63-3150 1/min, SK 40 Travel X/Y/Z 600/400/400mm Vertical milling head with manual quill Counter bearing arm with counter bearing Partial enclosure hinged Need for repair in Y-axis

spindle diameter: 130 mm x-travel: 3500 mm y-travel: 2000 mm z-axis: 1300 mm Table dimensions: 1800x1800 mm Control: ECS 2101 number of spindle speeds: 12,5 - 800 (63x) voltage: 380 V Control: total power requirement: 25 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC control HEIDENHAIN TNC 355 Spindle diameter 100 mm x-travel 1130 mm y-travel 1250mm z-travel 950 mm Flange diameter of the hollow spindle 221.44 mm Table clamping area 1120 x 1000 mm Spindle mount ISO 50 size Mass of the workpiece 3000 kg Quill stroke 650 mm Spindle speeds 0 - 1500 rpm Feed speeds 4 - 2500 mm / min Rapid traverse 4.5 m / min Total power requirement 32kVA Weight of the machine approx. 14 t Dimensions L x W x H 4.75 x 2.45 x 3.03 m

Stock number: 3760 LATHE Manufacturer: TRENS - TOS, Type: SN 50C - 2000 Machine NO.: 08005020060214, Year of construction: 2006 Specifications: Turning length 2000 mm Center height 250 mm Turning over bed 500 mm Ø Turning in recess 700 mm Ø Spindle bore 52 mm Ø Spindle speeds 22-2000 rpm Spindle motor power 5.5 kW Accessories: Tailstock Digital display Jenix - Ikke monteret - not mounted dkk 10.000.- Multi-tool holder Centering chuck mm Ø Universal lining mm Ø Fixed bezel mm Ø Length: 3640 mm, Height: 1540 mm, Width: 1100 mm, Weight: 1890 kg

spindle diameter: 130 mm x-travel: 3500 mm y-travel: 2500 mm z-travel: 1250 mm w-axis: 800 mm b-axis: 360 ° spindle turning speed range: 1000 U/min transmission ratio: 4 Control: Heidenhain type: 355 table surface area: 1800x2200 mm Table load: 12000 kg spindle taper ISO: 50 width of T-slots: 22 mm T-slot - distance: 160 mm Feed: 1-6000 mm/min table rotating: 1,5 U.min-1 total power requirement: 80 KVA weight of the machine ca.: 36 t dimensions of the machine ca.: 7,7x7,2x4,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear hobbing machine OFE 22, with accessories

Inv. Num. : 6345 Type: WHN 13.4.C Producer: TOS Produced: 1988 Parameters: Control system: MEFI CNC 836 Work table length: 2200 mm Work table width: 1800 mm Spindle drive power: 37 kW Maximum spindle speed: 2800 1/min Travel X-axis: 2000 mm Travel Y-axis: 1600 mm Travel Z-axis: 1200 mm Machine weight: 32.000 kg Replaced ball screw. Measurement of each ESSA axis separately. Drive for each XYZ axis.

Drilling capacity: 130 mm Throat: 10 mm Spindle taper: 50   CNC Brand: Heidenhain X - Travel:    3500mm Y - Travel:    2000mm Z - Travel:    800mm W - Travel:    1250mm Table Length:  1800mm Table Width:   1600mm Table load:    12000 Speeds / ranges:1365Rpm Power:         37kW Spindle Taper: 50ISO/Bt/Mk

Center height: 500 mm Center distance: 1500 mm Spindle bore: 52 mm Swing over bed Ø:        500mm Swing over cross slide Ø:270mm Swing in the gap Ø:      700mm DBC Turning Length:      1500mm Gap length:              230mm Spindle bore:            52mm Spindle power:           5,5kW Tailstock spindle Ø:     70Ø Stroke pinole:           180mm Spindle taper:           5Mk Speeds / ranges:         2000Rpm Length:                  3200mm Width:                   1800mm Height:                  1 ...

Spindle diameter: 50 mm Cross X: 1600 mm Vertical Y: 1120 mm Table length: 1250 mm Table width: 1250 mm Positions ATC: 1   Number of pallets: 1   Table type boring millTOS VARNSDORF - W100A X - Travel:    1600mm Y - Travel:    1120mm Z - Travel:    1250mm Table Length:  1250mm Table Width:   1250mm Table load:    3000 Speeds / ranges:1120Rpm Power:         11kW Spindle Taper: 50ISO/Bt/Mk Length:        6000mm Width:         3700mm Height:        3200mm Weight:        13600kg

Mas Tos VR2 Mk4 Admission in drilling-spindle (morse): Mk4 Driven gear (from -- to): 90 > 4500 rpm Max drilling depth: 230 mm

Tos HOV 25 Ø 500 mm Strokelength: 250 mm Table dia: 500 mm Longitudinal travel table X-axes: 560 mm Crosstravel table Y-axes: 450 mm Length : 2270 mm Depth : 1425 mm Weight: 2850 kg

Inv. Num. : 6598 Type: SK 12 Producer: ZPS Created: 1964, GO 1994 Parameters: Table diameter: 1180 mm Clamping plate speed: 5.3-225 1/min Max. turning diameter: 1350 mm Max. workpiece height: 900 mm Max. workpiece weight: 5000 kg Length: 2360 mm Width: 3860 mm Height: 4260 mm Weight: 18300 kg

turning diameter over bed: 655 mm turning diameter over slide rest: 390 mm turning length: 1250 mm spindle bore: 82 mm spindle turning speed range: 9-1120 U/min feeds: 0,049-3 mm/U total power requirement: 12 kW weight of the machine ca.: 5,2 t required space: 3,5 x 1,9 x 1,7 m m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 720 mm y-travel: 255 mm Z-Travel: 400 mm clamping surface area: 1000 x 250 mm range of revolution per miute: 40...3150 / 8 step U/min tool taper: ISO 40 (SK40) milling head swivable : +/- 90 ° Quill Stroke: 127 mm feed:Z: 8,5...136 / with 9 step rapid traverse:: X/Y/Z: 2500 mm/min feed:: X/Y: 28...450 / with 9 step mm/min. total power requirement: 3.2 (4 kVA) kW dimension machine approx. LxWxH: 1.8 x 1.6 x 2.4 m Weight of the machine approx.: 1,5 t

spindle diameter: 130 mm x-travel: 2000 mm y-travel: 2000 mm z-travel: 1250 mm w-axis: 800 mm Control: Heidenhain type: TNC 135 table surface area: 1800x1800 mm Table load: 12000 kg power capacity: 30 kW 09-08 machine number The techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Universal milling machine SN55/2000 with steady rest.

MAX DIAMETER 550 MAX MODULE 6

MAX DIAM 550 MAX MODULE 6

Inv. Num. : 6702 Type: WHN 9B Producer: TOS Created: 1975 Parameters: X-axis travel: 1250 mm Y-axis travel: 900 mm Z-axis travel: 1000 mm Equipment: DRO

Inv. Num. : 6710 Type: WH 80 Producer: TOS Created: 1964 Parameters: Working table length: 1090 mm Working table width: 1000 mm Maximum table load (uniform): 2500 kg Maximum spindle speed: 1400 1/min X-axis travel: 1250 mm Y-axis travel: 900 mm Z-axis travel: 1250 mm Spindle diameter: 80 mm Machine height: 2550 mm Machine length: 5000 mm Machine width: 2500 mm Machine weight: 10850 kg Equipment: HE.

Inv. Num. : 6737 Type: WHN 11 Producer: TOS Created: 1970 Parameters: Working table length: 1250 mm Working table width: 1250 mm Maximum table load (uniform): 8000 kg Maximum spindle speed: 900 1/min X-axis travel: 1600 mm Y-axis travel: 1250 mm Z-axis travel: 1000 mm Spindle power: 34 kW Spindle diameter: 110 mm

Inv. Num. : 6762 Type: WHN 9 B Producer: TOS Created: 1975 Parameters: Repair history: 30.8.2021: Repair of the rotary table 31.5.2021: Repair of the lubrication system for guide surfaces 18.02.2021: Adjustment of the rotary table coupling 22.10.2020: Replacement of the sealing elements of the hydraulic cylinder of the tool clamping Replacement of the tool support bearings Replacement of hydraulic hoses for tool clamping 21.10.2019: Replacement of the electromagnetic clutch 09.10.2019: Brush holder - carbon 31.1.2017: adapted quick-shift clutches with replaced spark plugs and shift knobs on the "Y" axle 11.03.2017: Lockshift clutch

Double Column Machining Center TOSHIBA MPC-3180B Table mm.8000 x 2700 Distance between columns mm.3100 X mm.9000 Y mm.3900 Z Verticaal RAM stroke mm.900 W Vertical Crossrail stroke mm.1600 Automatic indexed every 5 degrees 5 face head Distance table to spindle nose mm.2440 Table load Kg. 20.000 Spindle speed 5-3000 rpm 2 ranges Spindle taper BT 50 Ram section 380 x 380 Machine dimensions mm.29110 x 9900 x 7260 Machine weight Kg. 151.000 Year 2007 Standard options : 5-face cutter head Automatic attachment (5-face cutter head or other attachments)index (AAI) (4-position index by 90.) Automatic tool loading/unloading device for vertical spindle and horizontal spindle) CNC controller including standard and pack specifications Pendant operation box with electrically-driven free arm Hydraulic unit Oil cooling unit (AKZ 908) Hydraulic crossrail servo balancing s ...

CNC Heidenhain TNC 426 with handwheel HR 410 X = 3500 mm Y = 2500 mm Z = 1250 mm W = 800 mm Table dimensions 1800 x 2200 mm Spindle diameter 130 mm Max. spindle speeds 2500 RPM External coolant 2-axis manual milling head TOS HUR 50 year 2004 almost unused.

CNC controller: FANUC 15i-M Axes; X-axis travel mm: 9.000 Y-axis travel mm: 3.900 Z-axis travel mm: 900 W-axis travel mm: 1.600 (distance between columns 3.100 mm) Distance spindle nose - table surface mm: 2.440 Feed rates m/min: 6 (X,Y,Z) 3 (W) Rapid traverse m/min: 20/9 (X,Y) 10(Z) 6(W) Worktable; Number of pallets: 2 (table automatic changer) Table dimensions mm: 2.700x8.000 Max. workpiece weight kg: 20.000 Spindle; Spindle speed rpm: 5-3.000 (2 ranges) Spindle drive power kW: 30(50% ED)/22 Spindle torque Nm: 2.170 Tool system; Tool holder: MAS BT50 Tool magazine slots: 180 Equipment; Chip conveyor Signal lamp High pressure pump Tool breakage probe Preapared for RENISHAW sonde RENISHAW Measuring probe Rated power kVA: 150 AAC (Automatic Attachement Changer): Capacity = 5 Attachements and their cases: 1) Snout 190 2) Small Angle head 5 Faces Cutter Head ...

TOS SN 500S/1500 universal lathe was built by the Czechoslovakian factory TOS Trenčín. The conventional lathe is used for machining rotating parts such as a shaft or disc with a maximum length of 1500 mm, in single unit or small batch production. The machine’s rigid, stable design with a high-power main motor significantly increases production efficiency and allows full utilisation of the tools. The TOS SN500-S lathe for metal performs machining on workpieces with a maximum diameter of 500 mm (turning over bed), 270 mm (turning over support) or 700 mm (turning in bridge). Workpieces machined on the machine are characterised by excellent quality and precision. The total weight of the TOS SN 500 S 1500 lathe is 1895 kg. Technical parameters of the TOS SN 500S/1500 metal lathe - maximum turning length: 1500 mm - turning diameter in the bridge: 700 mm - turning diameter above th ...

Spindle diameter: 120 mm Cross X: 3500 mm Vertical Y: 2500 mm Table length: 2200 mm Table width: 1800 mm Positions ATC: 60   Number of pallets: 1   CNC Brand: Heidenhain X - Travel:               3500mm Y - Travel:               2500mm Z - Travel:               1250mm W - Travel:               800mm Table Length:             2200mm Table Width:              1800mm Table load:               12000 Speeds / ranges:          3000Rpm Power:                    37kW Spindle Taper:            50ISO/Bt/Mk Feed rate  ...

Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 120 mm -Edition: gray cast iron -Hole spacing: 135 mm -Tip height: 145 mm -Drawing with the photos -Number: 3x bezels available -Price: per piece -Dimensions: 370/280/H90 mm -Weight: 10 kg

Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 120 mm -Edition: gray cast iron -Hole spacing: 135 mm -Tip height: 145 mm -Drawing with the photos -Dimensions: 370/280/H90 mm -Weight: 10 kg

grinding diameter: 500 mm grinding length: 2900 mm centre height: 250 mm Control: Siemens Sinumerik 840D centre distance: 3000 mm stroke of the table: max. 3200 mm table feed: 0,001 - 4000 mm/min rapid traverse of table: 9 m/min table swivelling +/-: +4/-2 Grad grinding wheel size: 500x100x203 mm peripheral speed: 18 - 36 m/sec spindle speeds: 6 - 900 U/min grinding head swivelling: 90 Grad tailstock quill taper MT: 5 tailstock quill stroke: 80 mm grinding spindle drive: 9,5 kW working spindle drive: 0,1 - 3,1 kW hydraulic motor: 2,2 kW max. workpiece weight between centers: 500 kg workpiece weight in steadies max.: 840 kg total power requirement: 58 kVA weight of the machine ca.: 14,1 t dimensions of the machine ca.: 8,9 x 3,42 x 1,94 m CNC control SIEMENS SINUMERIK 840D with operating panel OP 10 and color flat screen TFT 10,4 with machine control panel MPC 19 remote control panel  ...

Hydraulic pump TOS RAKOVNIK GAR1-020-41PS-1K Nominal pressure: 16 MPa ( 160 bar ) Nominal displacement volume: 20 cm3 rated speed: 1500 rpm shaft: Ø 22 mm shaft length: 40 mm groove width: 6 mm flange: Ø 110 / 144 x 150 mm bolt circle diameter: Ø 148 mm hole diameter: Ø 13 mm control valve: VTK 20-6-350 New ! Dimensions: 390 x 275 x 150 mm

Round Dividing Table, Rotary Table, Circular Dividing Table TOS SM500 Ø 500 mm 360° Division used, tested ! Dimensions: 700 x 700 x 200 mm

Dividing head with 3 jaw chuck and centering point TOS DU-250 AS ( DU-250AS ) Ø 125 IU 125 M 1- 1 max 4500 rpm center height 135 mm used, tested ! Dimensions 600 x 400 x 320 mm

turning diameter over bed: 500 mm turning diameter over slide rest: 320 mm turning length: 1000 mm centre height: 250 mm centre distance: 1000 mm spindle bore: 56 mm spindle turning speed range: 14 - 2240 U/min spindle nose: DIN 55027 Gr. 6 feeds - longitudinal: 0,023 - 4,8 mm/U feeds - cross: 0,011 - 2,4 mm/U face slide travel: 300 mm upper slide travel: 140 mm thread - mm pitch: 0,25 - 60 mm thread - inch: 120 - 1/2 Gg/ thread - module: 0,125 - 15 mm tailstock quill diameter: 80 mm tailstock quill stroke: 180 mm tailstock taper MT: 5 total power requirement: 7,5 kW weight of the machine ca.: t dimensions of machine L x W x H: 2,42 x 1,23 x 1,93 mm Accessories: 3-jaw chuck 250 mmø, MULTIFIX-toolpost with various inserts, drill chuck, running center, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drilling capacity: 30 mm Throat: 30 mm Spindle taper: 30   CNC Brand: Heidenhain CNC Model: HeidenHain TNC 430 5 Axis CNC Horizontal borer Spindle Hours 18.300 Optional HU 50 Universal milling head ( rotation 1 direction C-Axis) Hydraulic tool clamping External coolant system X - Travel:              1250mm Y - Travel:              900mm Z - Travel:              630mm W - Travel:              1000mm Table Length:            1120mm Table Width:             1000mm Table load:              3000 Speeds / ranges:         2500Rpm Power:                   30kW Spind ...

MAX DIAM 500, MAX MODUL 8 , PLC , DRO

Key data: 130 mm, 4000 mm, 2500 mm

TOSHIBA BP-130R22 Year 2007 SPINDLE DIAMETER 5.12" (130mm) TAPER IN SPINDLE #50 VERTICAL TRAVEL, Y-AXIS 100" (2500mm) CROSS TRAVEL, X-AXIS 160" (4000mm) SPINDLE TRAVEL, Z-AXIS 28" COLUMN TRAVEL, W-AXIS 60" TABLE SIZE (BUILT IN B-AXIS) 86.6" X 70.8" TABLE LOAD CAPACITY 44,000 LBS TABLE INDEXING B-AXIS 0.001 DEGREE SPINDLE SPEEDS (3-RANGES) 5-2500 RPM EQUIPPED WITH: TOSNUC 888 CNC CONTROL 60-STATION AUTOMATIC TOOL CHANGER THROUGH SPINDLE COOLANT CHIP & SPLASH ENCLOSURE CHIP CONVEYOR 40/30 HP SPINDLE MOTOR NOTES: INSPECT IN PLANT UNDER POWER

Including chipconveyor Swing over bed: 630 mm Distance centre tot centre: 1000 mm Max longitudinal travel Z-axis: 500 mm Max cross travel X-axis: 320 mm Dia of spindle bore: 92 mm Power on the spindle: 17 kW Number of speeds: 2 > 3000 rpm Command: Siemens Sinumerik 810D Total power needed: 52 kVa Length: 5500 mm Width: 2200 mm Height: 2100 mm Weight: 6,6 ton Toolchanger: yes Number of tools: 12 positions

Key data: 130 mm, 3000 mm, 2000 mm

Inv. Num. : 6957 Type: WHN 13 Produzent: TOS Erzeugt: 1976 Parametern: Arbeitstischlänge: 1800 mm Arbeitstischbreite: 1800 mm Maximale Tischbelastung (gleichmäßig): 120.000 kg Verfahrwege X-Achse: 3000 mm Verfahrwege Y-Achse: 2000 mm Verfahrwege Z-Achse: 800 mm Spindeldurchmesser: 130 mm DRO

x-travel: 300 mm y-travel: 200 mm z-travel: 350 mm spindle taper ISO: 40 spindle turning speed range: 50 - 2500 U/min table-size: 600 x 250 mm table load: 75 kg power capacity: 1,5 kW quill stroke: 80 mm voltage: 400 V feed: 8 - 400 mm/min total power requirement: 4 kW weight of the machine ca.: 950 kg dimensions of the machine ca.: 1,70x1,30x1,20 mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1600 mm, 460 mm, 16

3 x heads , change gears

Inv. Num. : 6989 Type: WH 10 NC Producer: TOS Created: 1984 Parameters: Work table length: 1120 mm Work table width: 1000 mm Maximum table load (uniform): 3000 kg Minimum spindle speed: 16 1/min Maximum spindle speed: 1250 1/min X-axis travel: 1250 mm Y-axis travel: 900 mm Z-axis travel: 1000 mm Cone: ISO 50

Lathe TOS SUI 40-50 Center width 1500 mm Circulation over machine bed 500 mm Circulation over support 320 mm Spindle speed 14 to 2240 rpm Quick Release - Steel Bracket § Jaw wedge bar chuck Machine is ready for operation and in good condition

Ref. -No.: 10320 Manufacturer: TOS Type of control: Digitalanzeige - Mitutoyo Control: Konventionell Storage location: Halberstadt Country of origin: Tschechien Tip length: 1500 Centre Height: 280 mm Centre Distance: 750,1000,15000,2000 mm Spindle Bore: 56 mm Swing diameter over bed: 500 mm Number of speed levels: 18 Circumferential diameter over the support: 320 mm Circumferential diameter over the bed recess: 560 mm Bed length relieved from headstock: 300 mm Universal chuck diameter: 250 mm Diameter of the clamping disc: 500 mm Further information: Universal center lathe

Ref. -No.: 10316 Manufacturer: TOS Year of construction: 1996 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Slovakia Machine length: 3450 mm Machine width: 2236 mm Machine Height: 2000 mm Weight Of The Machine Ca.: 4,4 t Grinding wheel: 260 mm Table Dimensions (Lengthxwidth): 1500 x 400 mm Height of grinding with new grinding wheel (without magnetic plate): 500 mm Grinding wheel fx width x bore: 350 x 40 - 80 x 127 mm Width of the composite grinding wheel: 200 mm Max. load on the work table: 5000 N Table surface: 400x1000 / 1500 mm Max. distance of the spindle axis: 675 mm Max. length of grinding: 1000/1500 mm

Manufacturer: Toshiba, Type: EX 40-4MCRD2, Modell: Programmmable Controller, Seriennummer: 94N-2025,

Manufacturer: Toshiba, Type: Programmable Controller, Modell: EX20-1MCRB5, Seriennummer: 5602167,

Key data: 2500 mm, 3000 mm, 2000 mm

Tos hulin CNC Sinumerik 840 C Year 1999 Table dia : 2500 mm Max turning did 3000 mm Max Turning hight 2000mm under power

Key data: 3000 mm, 1800 mm, 1600 mm

Inv. Num. : 7037 Type: OPTIMA Producer: TOS Created: 2005 Parameters: Duty cycle: 83171 h Hours: 36486 h Work table length: 2500 mm Work table width: 1800 mm X-axis travel: 3000 mm Y-axis travel: 1800 mm Z-axis travel: 1600 mm