We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
124,990 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Machine weight: 39,000 kg Faceplate diameter 2000 mm number of supports: 2 pcs. Dimensions : Height 6280 mm width 6600 mm length 4800 mm Extras: Right support with turret head, left and side - sliders. Digital indication of NS 114. Technical condition at the time of sale: Defective rotary amplifier main drive-replacement is required. Require replacement of cables and wires external piping:-machine control cabinets. Repair and adjustment of electrical parts. Not operated since 1994 The maximum dimensions of a workpiece Height 1300 mm Diameter of 2000 mm Weight 15 000 kg
used
Largest workpiece height: 630 mm Largest workpiece diameter: 800 mm Largest workpiece weight: 2000 kg Engine power: 40 kW Dimensions: 2600x2500x3700 mm Machine Weight: 10000 Kg Electrical table voltage Electrical rotation of the knife head Shaped copy via template Two-axis measurement Ball screw Suitable for CNC conversion Accessories: Clamping pressure gauges Tools
used
(FP 50-13) - vertical milling head accessories for the WH 10 CNC and WHN(Q) 13 CNC machines milling operations of vertical and in surfaces manually fastening on the machine, manually clamping of tools
used
Table clamping area: 290 x 1250 mm Table movement x: 800 mm Table movement y: 360 mm Table movement z: 450 mm Milling head pivotable: 90/45 ° Spindle holder: ISA 40 Spindle speeds: 56 - 4500 rpm Pinolene stroke: 125 mm Pinolene feeds: 0.035; 0,14; 0.7 mm/min Spindle drive: 1.8/2.4 kW Space requirement: 2000 x 1900 x 2300 mm Weight: 1700 kg
used
Peak height: 160 mm Tip width: 1500 mm Grinding wheel dimensions: 500 x 127 x 40 mm Grinding wheel speeds: 1570/2050 rpm electr. Connection: 380 V kW Space requirement: 4400/6400 x 2000 x 1400 mm Weight: approx. 4000 kg
used
ORDER NO. 6524 TECHNICAL DATA - track width 360mm - shaft width 350mm - max disc diameter 350mm - disc bore diameter 80mm - max cutting height 120mm - table top size 2040x840mm in advance: - ratchets - pulling shaft, toothed - ratchets - smooth sliding shaft - shaft with saws - slip shaft, pressure shaft bottom: - 2 rolls in front of the table top - guide - ratchets - caterpillar - central lubrication of the track - electric shaft lifting with saws 0.55kW - electric body lifting 0,55kW - smooth regulation of the feed speed - diameter of the extraction connection 140,125mm - main motor 45kW - overall dimensions L/W/H 3530x2220x2200mm - weight about 4000kg ADVANTAGES – Czech production – 2 slip rollers in the countertop – used multisaw – very good condition Net price: 62900 PLN Net price: 13978 EUR depending on the price 4,50 EUR ...
used
ORDER NO. 6591 TECHNICAL DATA - track width 450mm - shaft width 450mm - disc bore diameter 80mm - shaft diameter 60mm - min dial diameter 300mm - max dial diameter 400mm - max cutting height 250mm - max width of input material 860mm - min length of the workpiece 800mm in advance: - repellers - pulling shaft, metal pressed pneumatically - repellers - pulling shaft, metal, pneumatically pressed - pressure - shaft with saws - pressure - 2 pulling shafts, metal pressed pneumatically bottom: - metal roller, slip roller - guide - repellers - caterpillar - shaft with saws - caterpillar - smooth adjustment of the feed speed on the inverter 4-40m/min - main motors 2x75kW - feed motor about 3kW - electric body lift up/down 0.55kW - electric shaft adjustment with saws 2×0.18kW - central lubrication - diameter of the extraction connection 2x300mm ...
used
The pallet is in the middle of the machine. The ring with the film roll rotates around the load and wraps it. Because the film gripping and sealing unit is attached to the ring, the wrapping process can start and end at any desired height on the load. Characteristics: Tosa Modell 125 Machine No.: 103743 Year of Construction: 2010
used
Tech. Data and more info on request
used
ITALPACK packing machine with its accessories MASPACK/TOSA end line wrapping system with its accessories.
new
215 MW Toshiba Inlet Steam Turbine & Generator (Unused and well maintained) New in 2008, this Power Plant has never been used and is available for immediate inspection and delivery. Never having been used, the Plant has no wear whatsoever. The Steam Turbine: Extraction & condensing, Inlet pressure: 104 bar, Output: 215MW Extractions: MP2: 22 bar, MPI: 10 bar, LP: 4.5 bar, Feed Water: 0.4 bar Minimum load: • No extractions, Only bleeds, Steam flow: 45 kg/s Maximum load: Steam flow: 270 kg/s The turbine is a Single Flow Extraction Condensing type. Steam initially enters the steam inlet flange near the end of the high pressure section and flows through the turbine stages toward the generator end of the unit. After passing through the turbine stages, the steam is exhausted to condenser. The exhaust hood is keyed to the foundation plates at a point near its center ...
used
Ø board: 1250 mm Maximum turnerable: 1500 mm Useful height: 1355 mm Vertical crossbar stroke: 800 mm Ram vertical stroke: 1000 mm Toolholder number: 15 Table pruned: 12000 kg CNC Tesla NS 642 C Fast: 8 m/min Power: 40 kW Weight: 27.2 ton
used
table diameter: 500 mm table load: 0,3 t table height: 200 mm total power requirement: kW weight of the machine ca.: 0,2 t dimensions of the machine ca.: 0,6x0,6x0,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 100 mm x-travel: 1250 mm y-travel: 900 mm z-travel: 1000 mm w-axis: 630 mm table load: 3 t Table dimensions: 1000x1120 mm voltage: 380 V taper ISO: 50 P.D.B. control: Heidenhain TNC 135 total power requirement: 15 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 3000 mm y-travel: 800 mm z-travel: 1000 mm Control: Heidenhain type: TNC 155 table surface area: 3000x800 mm turning speeds: 2000 U/min spindle taper ISO: 50 total power requirement: kW weight of the machine ca.: 16 t dimensions of the machine ca.: 7,8x3,85x3,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 90 mm x-travel: 1250 mm y-travel: 1200 mm Table dimensions: 1000 x 1120 mm w-axis: 700 mm tool adaptor: ISO 40 spindle turning speed range: 28 - 1400(x18) U/min z-travel: 1600 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 90 mm x-travel: 1250 mm y-travel: 1120 mm z-travel: 1400 mm w-axis: 710 mm spindle turning speed range: 28 - 1400(x18) U/min tool adaptor: MT 5 Table dimensions: 1000 x 1120 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Facing head, 3 axis digital read out, spindle support and tailstock. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
grinding diameter: 630 mm grinding length: 3000 mm workpiece weight: 2500 kg grinding wheel diameter: 750 mm voltage: 400 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
grinding diameter: 630 mm grinding length: 4000 mm max. dia. of grinding wheel: 630 mm spindle speeds: 8 - 315 mm voltage: 380 V workpiece weight: 3000 kg total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
control: Heidenhain 355 tool adaptor: SK50 weight of the machine ca.: 8 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 100 mm x-travel: 1250 mm y-travel: 1120 mm z-axis: 1250 mm table-size: 1250 x 1250 mm taper: ISO 50 PDB total power requirement: 11 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 110 mm x-travel: 2000 mm y-travel: 1500 mm z-travel: 1450 mm table surface area: 1400 x 1600 mm taper ISO: 50 spindle speed:: 2 - 2500 Control: TOSNUC 7-3 total power requirement: 22 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 850 mm y-travel: 500 mm z-travel: 450 mm table-size: 1250x500 mm spindle taper ISO: 50 spindle turning speed range: 35,5-1800 U/min weight of the machine ca.: 5.2 t HEIDENHAIN TNC-355 Misc accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 100 mm x-travel: 1500 mm y-travel: 1250 mm z-travel: 1800 mm turning speeds: 7,1-1120 U/min table surface area: 1200x1200 mm w-axis: 800 mm Radial face slide: 600 mm radial face slide travel: 200 mm Tailstock: mm angular milling head: digital readout: Heidenhain total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
faceplate diameter: 1200 mm swing diameter: 1600 mm turning height: 1200 mm max. ram stroke: 1100 mm Tool changer: 16 chip conveyor: kW live tooling: control: Siemens total power requirement: kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 100 mm x-travel: 1250 mm y-travel: 1100 mm z-travel: 950 mm Table load: 3000 kg table surface area: 1000x1120 mm turning speeds: 16-1250 U/min spindle taper ISO: 50 Control: Heidenhain total power requirement: kW weight of the machine ca.: 13,4 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Control: Heidenhain 355 x-travel: 850 mm y-travel: 550 mm z-travel: 450 mm tool taper: SK50 hydraulic vise: documentation: weight of the machine ca.: 5,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
bore capacity in steel (diameter): 50 mm arm length: 1500 mm workpiece height max.: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1610008 Type of machine Radial drill Make MAS Type VO 50 Admision in drilling spindle MT 5 Max. drill capacity 50 mm Base dimensions 1820 x 986 mm Speeds (Rpm) 28 - 2500 Feeds (mm/R) 0,5 - 2 Lenght (mm) 3250 Width (mm) 1120 Height (mm) 3396 Weight 4550 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Tailstock counter bearing for dividing head, dividing attachment -Tip height: 95-115 mm -Recording: MK2 -Dimensions: 180/100/H110 mm -Weight: 4 kg
used
Tailstock counter bearing for dividing head, dividing attachment -Tip height: 120 mm -Dimensions: 230/130/H150 mm -Weight: 10 kg
used
Copy head, copy head, copy device, copy lathe -heavy copy head for: lathe -without: hydraulic unit -Guide rails: 2 -and additional equipment -Dimensions: 1100/170/H370 mm -Weight: 143 kg
used
Center height: 0 mm Center distance: 2000 mm Spindle bore: 77 mm SPECIFICATIONS Swing over bed Ø 505 mm Control Conventionel Swing over cross slide 270 mm Swing in the gap Ø 700 mm Distance between centres 2000 mm Spindle bore 77 mm Spindle speeds / ranges 2000 Rpm Power 7.5 Kw DIMENSIONS Length 4100 mm Width 1250 mm Height 1800 mm
used
Table length: 1800 mm Table width: 630 mm Longitudinal X: 1400 mm Cross Y: 630 mm Vertical Z: 630 mm Positions ATC: 0 SPECIFICATIONS X - Travel 1400 mm Y - Travel 630 mm Z - Travel 630 mm bed / plano / portal / moving column Universal bed milling Controll 3 axis digital read out Table Length x Width 1800 x 630 mm Spindle Taper Bt 50kW power on spindle 22 kW
used
tags for table feed box
used
Inv. Num. : 5849 Type: IS 220 GN Producer: TOSHIBA Created: 2002 Parameters: Clamping force: 2150 kN Screw diameter: 50 mm Injection capacity: 490 cm³ Injection mass: 450 g Min. height of the clamping plate: 870 mm Min. width of the clamping plate: 820 mm Distance between stands (horizontal): 610 mm Distance between stands (vertical): 560 mm Ejector force: 140 kN Ejector stroke length: 800 mm Maximum spray pressure: 201 MPa Opening the mold: 1060 mm Machine length: 5900 mm Machine width: 1340 mm Machine height: 1840 mm Spray weight: 8600 kg
used
The pallet is located in the middle of the machine. The ring with the film roll rotates around the load and wraps it. Since the film gripping and closing unit is attached to the ring, the winding process can begin and end at any desired height of the load. Properties: Tosa Model 125 Machine No.: 103743 Year of construction: 2010
used
Circulation diameter over bed ... 500mm Distance between stands ... 2000mm workpiece weight ... 600kg Circulation diameter via support ... 270mm Main engine power ... 5.5kW L x W x H ... 1100 x 3575mm Machine weight ... 1845kg complete general overhaul in 2022, CE certificate, new cover, Machine in good condition, possible to test under power.
used
Displacement of the X-axis: 850 mm Displacement of the Y-axis: 300 mm Displacement of the Z-axis: 420 mm Spindle holder: ISO 50 Spindle speeds: 45 - 2,000 rpm. Digital display: Heidenhain 2-axis Table size: 1200 x 320 mm Feed X and Y: 14 - 900 mm/min. Feed Z:4 - 250mm/min. Rapid traverse X and Y: 2,800 mm/min. Rapid traverse Z:800 mm/min. Equipped with: - Cooling device - Machine clamp Country of origin: Czech Republic Spindle motor: 5.5 kW Machine weight: 3,300 kg Machine LxWxH:300 x 270 x 200 cm
used
Clamping surface of the table 950x3000 mm Bed length 6000 mm Table movement 2750 mm Passage between stands 1260 mm Machine weight 34 000 kg
used
X=3500mm Y=2000mm Z=1250mm W=800mm H=360° spindle 130 mm, ISO 50, max. 1600 rpm table 1600 x 1800 mm with a load of 12000 kg with Siemens electric and CNC Heidenhain TNC 415B Oil cooled: Schimpke. Dismantled. The machine has been used very little = in very good technical condition.
used
Horizontal boring mill WH10NC
used
TOSHIBA SHIBAURA CNC VERTICAL BORING MILL with FANUC 16i-T CNC Control Control: GE Fanuc Series 16i-T Table Diameter: 117.7” (3000mm) Maximum Swing: 141.7” (3600mm) Maximum Weight on Table: 50T (2) Ram Heads L & R Z-Stroke: 48 – 375” Maximum Distance Under Rail: 126.7”(3220mm) Maximum Height under Ram: 119.2”(3030mm) Cross Rail Travel: 79.9” Vertical Ram Stroke Right: 62.9”(1600mm) Vertical Ram Stroke Left: 49.2”(1250mm) Speeds: .32 – 63 RPM Approx. Weight: 125,222 lbs Equipped With 3000mm dia. Table / GE Fanuc 16i-T CNC Control / (2) Ram Heads
used
Machine weight: 20,000 kg Faceplate diameter 1250 mm Number of supports: 1 pcs Dimensions: height 4250 mm width 5630 mm depth of 3550 mm Extras: copying apparatus, turret head on the vertical support Technical condition at the time of sale: Replacement rotary amplifier on thyristor converter. Not operated since 1994 p. Small repair and adjustment of electrical and mechanical parts. The maximum dimensions of a workpiece Height 1150 mm The diameter of 1400 mm Weight 8000 kg
used
Milling machine, universal milling machine, tool milling machine -Clamping table: 300 x 800 mm -X/Y/Z 500/285/H430 mm -Spindle mount: SK40 -Speeds: from 40 to 2000 rpm -Power supply: 8-400mm/min - Rapid traverse: 600 mm/min -Cooling unit -Dimensions: 1430/1200/H2000 mm -Weight: 1594 kg
used
– year of manufacture 2007 – DTR documentation – Czech production – two lasers – ruler TECHNICAL PARAMETERS: track width 440 mm cutting height 55 mm – 200 mm disc diameter 320 mm main engines 2 x 75 kW feed motor 3 kW feed speed adjustable on the inverter up to 60 m/min five upper pressure rollers bottom auxiliary roller five rows of latches electric cutting height adjustment electric shaft height adjustment automatic central lubrication shaft diameter 60 mm wedge 18 mm sleeve diameter 80 mm wedge 13 mm sleeve length 440 mm connection diameter 200 mm transport dimensions (L/W/H) 280 / 245 / 230 cm weight 5120 kg
used
SU 125/3000 Swing over the bed 1250 mm Circular diameter above the 940 mm Tip distance 3000 mm Diameter of clamping plate 1250 mm Maximum workload of the workpiece 6000 kg Machine weight approx. 10,000 kg Delivery items of the accessories : - facing head 710 - 3-jaw chuck 630 - steady rests
used
Bohrleistung in Stahl (-Ø: 50 mm throat: 1500 mm workpiece height max.: 1380 mm Bohrleistung in Guß (-Ø: 60 mm Abstand Spindelmitte bis Säule: 320 - 1250 mm swival range +/-: 180 ° base plate surface area: 2640 x 1000 mm max. torque on the spindle: 310 Nm Bohrspindel-Ø/ Aufnahme: 75 mm /MK 5 bore spindle stroke: 310 mm spindle turning speed range: 28 - 2500 U/min feed:: 0,05 - 2 mm/U power capacity: 4 kW weight of the machine ca.: 4,3 t cube table 500 x 500 x 500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Horizontal milling machine FKH 80
used
conus taper: . mm The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 8500 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
SPECIFICATIONS: Hydraulic press for bent elements Dimensions of the work table mm: 2500 x 1300 Number of pistons: 4 diameter Ø 100 mm Piston stroke mm: 1500 -Enclosure -Control box -Oil pump - 2 steam outlets