tos fo 10 used for sale

Inv. Num. : 8799 Type: FO-10 Producer: TOS Created: 1958 Parameters: Maximum gear diameter: 1000 mm Maximum module: 10 Machine dimensions: 3120 x 1870 x 2525 mm Machine weight: 9000 kg

good condition

SHIFT PULLEYS ,MAX DIAM 600 ,MAX MODUL 6

Table drilling unit W 100 A Manufacturer: TOS Varnsdorf overhauled: 20125 Spindle diameter ... 100mm Axis X ... 1600mm Axis Y ... 1120mm Spindle speed ... 7-1120 rpm. Axis W ... 900mm Axis Z ... 1250mm ISO 50 Max table load ... 3000kg L x W x H ... 6710 x 3450 x 3000mm Machine weight ... 14000kg Main Engine Power... 11kW Total power demand ... 17kVA Clamping table area ... 1250 x 1250mm Flat disc diameter... 600mm Max circulation diameter ... 900mm The machine is possible to test under electricity, with one-year warranty.

X-axis stroke 8,000 mm Y-axis stroke 1,000 mm Z-axis stroke 2,000 mm ISO 50 spindle cone Front bearing spindle diameter 100 mm Total table top 1,000x10,000 mm Maximum workpiece weight per 1m board length 2,500 kg Nominal main propulsion power 22 kW Spindle rpm range - continuous 11-2,500 per minute

Bezel, stick, lynette -max. passage: Ø 107 mm -Tip height: 180 mm -Edition: gray cast iron -Technical drawing in the photos -Dimensions: 370/340/H80 mm -Weight: 16 kg

Bezel, stick, lynette -Max. Passage: Ø 107 mm -Tip height: 180 mm -Edition: gray cast iron -technical drawing with the photos -Dimensions: 370/340/H80 mm -Weight: 16 kg

Surface grinder BPH 320A/1000

grinding diameter: 1000 mm grinding length: 2000 mm centre height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis TOS KUŘIM FS 100 S/A3 vertical machining centre was manufactured in 2002. Consider the opportunity to buy this TOS KUŘIM FS 100 S/A3 vertical machining centre. Contact us for more information.

Inv. Num. : 8224 Type: W 100 Producer: TOS Created: 1972 Parameters: Work table length: 1250 mm Work table width: 1250 mm X-axis travel: 1600 mm Y-axis travel: 1120 mm Travel travel Z-axis: 1250 mm Taper: Morse Spindle diameter: 100 mm Equipment: Front panel DRO NEWALL

Year of manufacture: 1992 / G: 2025 Spindle diameter ... 100mm Axis X ... 1500mm Axis Y ... 1250mm Spindle speed ... 7-1120 rpm Axis W Axis Z ... 1800mm ISO 50 Turntable diameter ... 1200x1200mm The machine is in good condition, possible to test under power.

Center distance 11,000 mm Turning diameter 730 mm Drill height 500 mm turnable on the bench 1050 mm Motor power 22 kW

I am selling this machine, powered, in very good condition, can be tested. Extensive accessories. A video of the machine can be sent via WhatsApp. Swing diameter above the bed . 1050 mm. Distance between centers . 6000 mm. Turning diameter over support . 940 mm. Machine dimensions L x W x H . 88600x1600x1700 mm. Machine weight . 10,200 kg

Key data: 100 mm, 1600 mm, 1120 mm

Spindle diameter ... 100mm Axis X ... 1600mm Axis Y ... 1120mm Spindle speed ... 0-1120 rpm Axis W ... 900mm Axis Z ... 1250mm Spindle holder ... ISO 50. Clamping table surface ... 1250 x 1250mm Main engine power ... 11kW Max. workpiece weight ... 3000kg Total power requirement ... 15kVA L x W x H ... 6710 x 3450 x 3000mm Machine weight ... 14000kg The machine is in good condition, possible to test under power.

Key data: 100 mm, 1600 mm, 1120 mm

Spindle diameter ... 100mm Axis X ... 1600mm Axis Y ... 1120mm Spindle speed ... 0-1120 rpm Axis W ... 900mm Axis Z ... 1250mm ISO 50 Clamping table surface ... 1250 x 1250mm Main engine power ... 11kW Max. workpiece weight... 3000kg Total power requirement ... 15kVA L x W x H ... 6710 x 3450 x 3000mm Machine weight ... 14000kg The machine is in good condition, possible to test under power in our warehouse.

spindle diameter: 100 mm x-travel: 1600 mm y-travel: 1120 mm z-travel: 1250 mm table surface area: 1250 x 1250 mm spindle taper: ISO 50 spindle turning speed range: 7,1 - 1120 U/min faceplate turning speed range: 7,1 - 224 U/min faceplate diameter: 600 mm table load: 4000 kg main drive motor: 11 kW max. travel of spindle: 900 mm total power requirement: 15 kVA weight of the machine ca.: 14,5 t dimensions of the machine ca.: 6 x 3,1 x 3,1 m Overhauled/Modernized in 2003 - DRo Heidenhain - Faceplate with slide The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 100 mm x-travel: 1600 mm y-travel: 1120 mm z-travel: 1250 mm table surface area: 1250 x 1250 mm spindle taper: ISO 50 spindle turning speed range: 7,1 - 1120 U/min faceplate turning speed range: 7,1 - 224 U/min faceplate diameter: 600 mm table load: 4000 kg main drive motor: 11 kW max. travel of spindle: 900 mm total power requirement: 15 kVA weight of the machine ca.: 14,5 t dimensions of the machine ca.: 6 x 3,1 x 3,1 m - DRo Heidenhain - Faceplate with slide The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good technical condition, testing is possible by prior arrangement.

This 5-axis TOS VARNSDORF W 100 A was manufactured in 1999. It operates on a voltage of 3PE ~ 400 V, with a frequency of 50 Hz and a current of 22 A. The machines power capacity is 15 kVA, and it weighs 70 kg. Consider the opportunity to buy this TOS VARNSDORF W 100 A horizontal machining centre. Contact us for more information.

greates pass round over bed: 1050 mm dist. between centers: 6000 mm centre height: 520 mm turning length: 4810 mm workpiece weight max. (main spindle): 6000 kg Maximum workpiece weight with steady rests: 8000 kg max. torque on the spindle: 12500 Nm number of spindle speeds: 2,8-560 1/min Speed range 24 levels: feed per revolution: 0,08-56 mm chuck diameter: 630 mm Maximum travel distance of the longitudinal slide: 4810 mm Maximum travel distance of the cross slide (suppor: 530 mm Maximum travel distance of the tool slide (support: 340 mm Tailstock quill diameter: 150 mm total power requirement: 31 kVA weight of the machine ca.: 10500 kg dimensions of the machine ca.: 7860 x 1970 x 1480 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 100 mm, 1600 mm, 1120 mm

Spindle diameter ... 100mm Axis X ... 1600mm Axis Y ... 1120mm Spindle speed ... 0-1200 rpm Axis W ... 900mm Axis Z ... 1250mm Spindle mount... ISO 50. Clamping table surface... 1250 x 1250mm Max. table load ... 3000kg Main engine power ... 11kW L x W x H ... 6710 x 3450 x 3000mm Machine weight ... 14 000kg The machine is in good condition, possible to test under power.

Inv. Num. : 9019 Type: W 100 A Producer: TOS Generated: Parameters: Work table length: 1250 mm Work table width: 1250 mm X-axis travel: 1600 mm Y-axis travel: 1120 mm Travel travel Z-axis: 1250 mm

bore capacity in steel (diameter):- mm throat:- mm bore stroke:- mm x-axis:1.800 mm y-axis:1.600 mm z-axis:1.250 mm w-axis:630 mm max. table load:5.000 kg table length:1.400 mm table width:1.600 mm spindle diameter:105 mm spindle turning speed range:3.300 U/min numbers of positions in the tool changer:40 internal coolant system feed:40 bar Splash guard around rotary table Chip Conveyor Oil cooling unit (chiller) Touch probe Renishaw RMP60 Upgrades in 2024 and 2025 Retrofit of X and Z axis ball screws at producer ? KSK Kurim CZ New linear scales Heidenhain in X and Z axis including cabling retrofit of Z axis - new Biplast V lining on guideways, hand scraped Biplast lining on Z axis new TOS Varnsdorf parts for tool clamping and automatic tool changer arm Overhaul of X, Z and Y axis feed motors at authorized Siemens service (new bearings and sensor) New Siemens hand wheel

Used filling monoblock 8-1 toscana enologica - 1200 BPHTechnical Specifications & Performance DataThis Filling Monoblock Monomatic 8-1 by Toscana Enologica Mori is a compact solution designed for small to medium-scale beverage production. Built for precision and reliability, it combines an 8-valve gravity filler with a single-head straight cork capper, ensuring gentle product handling and consistent sealing quality for glass bottles. With robust construction and proven engineering, it is ideal for producers seeking a second hand, high-quality monoblock for industrial packaging applications.Manufacturer: Toscana Enologica MoriMachine type: Filling Monoblock (Filler + Cork Capper)Model series: MonomaticConfiguration: 8-valve gravity filler + 1-head straight cork capperProduction speed: up to 1,200 bph (bottles per hour)Container material: Glass bottlesElectrical supply: 380 V, 50 Hz, three ...

1 detailed with set stock for SN 63

CATALOG NO. 7134 TECHNICAL DATA - max planing width 500mm - max planing height 190mm in advance: - pawls - sequential pulling shaft - 2 rows of clamps - pulling, sequential input shaft - 500mm planing shaft, 4-knife, 7.5kW engine - clamps - pulling, smooth, output shaft - pressure on the lead from down: - adjustable insertion table + pressure - slip shaft, smooth - 500mm planing shaft, 4-knife, 5.5kW engine - 2 slip shafts, smooth - side pressure in the back: - side spindles 1) vertical right 140mm 4kW 2) vertical left 140mm 4kW - spindle diameter 40mm - spindles adjustable up/down, right/left - smooth adjustment of feed speed 8-30m/min - electric tabletop lifting - diameters of the exhaust pipe: 2x145mm, 2x160mm - dimensions length/width/height 2050x1700x1700mm - weight 2100 kg ADVANTAGES – ideal for flooring processing – electric tabletop lifting ...

Fixed bezel with roles Quill Used 400 mm forward

ORDER NO. 6524 TECHNICAL DATA - track width 360mm - shaft width 350mm - max disc diameter 350mm - disc bore diameter 80mm - max cutting height 120mm - table top size 2040x840mm in advance: - ratchets - pulling shaft, toothed - ratchets - smooth sliding shaft - shaft with saws - slip shaft, pressure shaft bottom: - 2 rolls in front of the table top - guide - ratchets - caterpillar - central lubrication of the track - electric shaft lifting with saws 0.55kW - electric body lifting 0,55kW - smooth regulation of the feed speed - diameter of the extraction connection 140,125mm - main motor 45kW - overall dimensions L/W/H 3530x2220x2200mm - weight about 4000kg ADVANTAGES – Czech production – 2 slip rollers in the countertop – used multisaw – very good condition Net price: 62900 PLN Net price: 13978 EUR depending on the price 4,50 EUR  ...

ORDER NO. 6591 TECHNICAL DATA - track width 450mm - shaft width 450mm - disc bore diameter 80mm - shaft diameter 60mm - min dial diameter 300mm - max dial diameter 400mm - max cutting height 250mm - max width of input material 860mm - min length of the workpiece 800mm in advance: - repellers - pulling shaft, metal pressed pneumatically - repellers - pulling shaft, metal, pneumatically pressed - pressure - shaft with saws - pressure - 2 pulling shafts, metal pressed pneumatically bottom: - metal roller, slip roller - guide - repellers - caterpillar - shaft with saws - caterpillar - smooth adjustment of the feed speed on the inverter 4-40m/min - main motors 2x75kW - feed motor about 3kW - electric body lift up/down 0.55kW - electric shaft adjustment with saws 2×0.18kW - central lubrication - diameter of the extraction connection 2x300mm  ...

CATALOG NO. 6913 TECHNICAL DATA - track width 360mm - roller width 350mm - max disc diameter 350mm - disc hole diameter 80mm - max cutting height 120mm in advance: - pawls - pulling shaft, toothed - pawls - smooth sliding shaft - shaft with saws - sliding, pressure roller from down: - 2 sliding rollers in front of the table top - runner - pawls - caterpillar - central lubrication of the track - electric lifting of the shaft with saws - electric lifting of the body - smooth adjustment of the feed speed - feed motor about 2.5 kW - main engine 30kW - overall dimensions length/width/height 2500x2300x1900mm - weight about 4000 kg ADVANTAGES – Czech production – 2 sliding rollers in the top - used multi-blade - very good condition Net price: PLN 59900 Net price: 12882EUR Net price calculated according to the exchange rate of 4.65 PLN/EUR (with large ...

Long belt Sanders for intermediate lacquer sanding Technical data: Grinding width: max 2,300 mm, min. 200 mm Workpiece height 8-200 mm 1.Schleifbandmasse 100-120 mm x 9000 mm 2.Schleifbandmasse 150 mm x 9000 mm Pressure plate tape measures 10 x 7280 mm Speed 4-12.5 m / min Suitable for intermediate lacquer sanding Grinding motor power kW 10/16 Total power: 20 kW Machine dimensions approx. B 4590 x L 2344 x H 1640 mm Engine weight 2150 kg

1 used Tischbohrwerk manufacturer: TOS Type: W75 1998. X-1250mm Y-900mm Z-1000mm W-560mm with 3-axis digital HEIDENHAIN Positip 855

Continuously variable speed gearbox, Variator VA31B101-72, Tos Znojmo, new Mechanical chain variator with stepless, electrical change of the ratio. - sufficiently large control range, - minimum maintenance requirements and - a simple operation Technical specifications: Drive speed: 950 rpm, Abtirebsdrehzahl: 448 to 2016 rpm Power: 2.85 to 5KW Torque: 60 to 24Nm Length: 660mm, width: 400mm, height: 580mm Weight: 145 kg State: The gearbox is brand new and was in stock as a spare part. Original packed

Control system Heidenhain TNC 415 Spindle diameter 130 mm Tapered hollow spindle ISO 50 Spindle speed range 10 to 1500 rpm Table transverse (X): 3500 mm Rolling headstock stand for (Y): 2000 mm Longitudinal displacement rack (W): 1250 mm Eject working spindle (Z): 800 mm Table load 12 000 kg Machine weight: 36 000 kg

TOS WHN 130 MC used machine Specifications System Heidenhain TNC 426 Working range Spindle diameter 140 [mm] Taper in the spindle ISO 50 Table transverse adjustment (X) 3000 [mm] Vertical headstock adjustment (Y) 2000 [mm] Vertical travel (Z) 1250 [mm] Spindle stroke (W) 560 [mm] 2X Clamping surface 1800 x 1600 [mm] Speed range 10 - 2500 [rpm] Main motor output 37,0 [kW] Max. workpiece weightƒ 8000 [kg] Accessories Tool changer for 60pcs Tool cooling Chip conveyor

W100A Parameters 100mm, 1600mm Diameter of working spindle 100 mm Taper in spindle morse 6. Longitudinal adjustment of table (z) 1450 mm Cross adjustment of table (x) 1600 mm Motion of work head on frame (y) 1120 mm Slip out of working spindle (w) 900 mm Clamping area of table 1250 x 1250 mm Dimensions l x w x h 6710 x 3450 x 3000 mm Machine weight 14 000 kg Accessories: face plate, tail stock

machine has live spindle for drilling and grinding face plate diameter mm 800 max. workpiece diameter mm 1000 max. workpiece height mm 750 max. diameter of external working mm 1000 Z axe mm 630 face plate revolutions 1 5 – 500 rpm main motor output kW 30 (40) machine dimensions length mm 4900 height mm 3830 width mm 4485 machine weight kg 16000 machine had DRO Tesla NS 642

Key data: 100 mm, 1600 mm, 1250 mm

DRO , TABLE 1250 X 1250

PART NUMBER: 7481 Specifications: - Track width 350mm - shaft width 350mm - max blade diameter 400mm - blade bore diameter 80mm - max cutting height 120mm - table top dimensions 2050x1230mm in advance: -Triggers - pulling shaft, toothed -Triggers - shaft with saws - slip shaft, pressure shaft From below: - rollers in front of the tabletop, 2 pcs -Guide -Triggers -caterpillar - central lubrication of the track -laser - electric shaft lifting with saws - Electric body lifting - Infinitely variable feed speed - extraction spigot diameter 140mm - main motor 45kW - total dimensions length/width/height 2600x2350x1850mm - weight about 4000kg Advantages: – Czech production - with laser – used multi-rip saw – very good condition Net price: 36900 PLN Net price: 8386 EUR depending on the price of 4.40 EUR (Prices may change with higher flu ...

PART NUMBER: 7480 Specifications: - Track width 360mm - shaft width 350mm - max disc diameter 350mm - blade bore diameter 80mm - max cutting height 120mm - table top dimensions 2040x1220mm in advance: -Triggers - pulling shaft, toothed -Triggers - shaft with saws - slip shaft, pressure shaft From below: - rollers in front of the tabletop, 2 pcs -Guide -Triggers -caterpillar - central lubrication of the track - electric shaft lifting with saws - Electric body lifting - Infinitely variable feed speed - extraction spigot diameter 140mm, 160mm - main motor 30kW - total dimensions length/width/height 2600x2300x1850mm - weight about 4000kg ADVANTAGES – Czech production – used multi-rip saw – very good condition Net price: 37900 PLN Net price: 8614 EUR depending on the price of 4.40 EUR (Prices may change with higher fluctuations)

Machine weight: 39,000 kg Faceplate diameter 2000 mm number of supports: 2 pcs. Dimensions : Height 6280 mm width 6600 mm length 4800 mm Extras: Right support with turret head, left and side - sliders. Digital indication of NS 114. Technical condition at the time of sale: Defective rotary amplifier main drive-replacement is required. Require replacement of cables and wires external piping:-machine control cabinets. Repair and adjustment of electrical parts. Not operated since 1994 The maximum dimensions of a workpiece Height 1300 mm Diameter of 2000 mm Weight 15 000 kg

Table clamping area: 290 x 1250 mm Table movement x: 800 mm Table movement y: 360 mm Table movement z: 450 mm Milling head pivotable: 90/45 ° Spindle holder: ISA 40 Spindle speeds: 56 - 4500 rpm Pinolene stroke: 125 mm Pinolene feeds: 0.035; 0,14; 0.7 mm/min Spindle drive: 1.8/2.4 kW Space requirement: 2000 x 1900 x 2300 mm Weight: 1700 kg

Peak height: 160 mm Tip width: 1500 mm Grinding wheel dimensions: 500 x 127 x 40 mm Grinding wheel speeds: 1570/2050 rpm electr. Connection: 380 V kW Space requirement: 4400/6400 x 2000 x 1400 mm Weight: approx. 4000 kg

Tech. Data and more info on request