tos fo 10 used for sale

x-travel: 720 mm y-travel: 360 mm z-travel: 420 mm total power requirement: 8 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 400 mm, 800 mm

For sale TOS lahe SU80/8000 y.m. 1963/2008 Diameter above the bed: 800 mm Circulating diameter above the slide: 495 mm Distance between centers: 8000 mm Machine dimensions (wxd): 1845x11175 mm Machine cca weight: 10000 kg The lathe has a lot steady rest and DRO ESSA

surface area: 800455 mm no. of flutes: - groove width: - mm weight of the machine ca.: t dimensions of the machine ca.: m Universal swivelling + tilting table Table top rotatable 360 Tiltable forwards/backwards -15 / 45° Sideways swivelling +/- 30 Cross adjustment ( Y ) 160 mm Mounting surface 350 x 250 mm ( additional adapter plate ) Table surface 800 x 455 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Toshiba MMY-MAP1204HT8P-E Air Conditioner Outdoor Unit with 6 Toshiba 4-way ceiling cassette for cold and heat incl. original Toshiba remote control Cooling power: 33.5 kW Heating power: 37.5 kW Refrigerant: R410A Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: info(a)frigocom.at

Toshiba MMY-MAP1604HT8P-E Air Conditioner Outdoor Unit with 6 Toshiba 4-way ceiling cassette for cold and heat incl. original Toshiba remote control Cooling power: 45 kW Power heating: 50 kW Refrigerant: R410A 2 sets available, each with 1 outdoor unit and 6 indoor ceiling cassettes including remote control Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: info(a)frigocom.at

Key data: 320 mm, 110 mm, 6

MAX DIAM 320

Max. grinding diameter 200 mm Max. sanding length 600 mm Max. workpiece weight 60 kg Device for internal grinding: no Machine dimensions L x W x H 2100x1800x1500 mm Machine weight 2300 kg Center width 600 mm

Center spacing 1 000 mm Max. diameter of the cylinder to be ground 250 mm Minimum step of the X-axis 0.001 mm Minimum step of the Z-axis 0.005 (0.001) mm Circumferential speed of the grinding wheel 25 – 45 m/s Maximum weight of the workpiece between the tips 80 kg Maximum weight of the workpiece including pick-up – on-the-fly clamping 25 kg Grinding wheel diameter 400 mm Cizctcazsk Grinding head spindle drive 4 kW Kavalír CNC control system

1x CNC Table Boring Machine Manufacturer: TOS Type: WHQ Year of Make:1997 Control: Heidenhain TNC 426 in 5-axis X-axis 2000mm Y-axis 1400mm Z-axis 1250mm W-axis. 710 mm B-axis 360 degrees Spindle diameter : 112mm Spindle mount: ISO 50 Spindle speed max: 2000 rpm Table clamping surface: 1400x 1600mm Tool changer: 60 places Chip Conveyor: Yes

Key data: 1600 mm, 460 mm, 16

TABLE DIAM 1350

x-travel: 1400 mm y-travel: 630 mm z-travel: 600 mm Control: Heidenhain total power requirement: 15 kW weight of the machine ca.: 5,85 t dimensions of the machine ca.: 1800x630 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: mm grinding length: mm centre height: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 3000 mm y-travel: 800 mm z-travel: 1000 mm Control: Heidenhain type: TNC 155 table surface area: 3000x800 mm turning speeds: 2000 U/min spindle taper ISO: 50 total power requirement: kW weight of the machine ca.: 16 t dimensions of the machine ca.: 7,8x3,85x3,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 3500 mm y-travel: 2500 mm z-travel: 1250 mm w-axis: 800 mm b-axis: 360 ° spindle turning speed range: 1000 U/min transmission ratio: 4 Control: Heidenhain type: 355 table surface area: 1800x2200 mm Table load: 12000 kg spindle taper ISO: 50 width of T-slots: 22 mm T-slot - distance: 160 mm Feed: 1-6000 mm/min table rotating: 1,5 U.min-1 total power requirement: 80 KVA weight of the machine ca.: 36 t dimensions of the machine ca.: 7,7x7,2x4,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 100 mm x-travel: 1500 mm y-travel: 1250 mm z-travel: 1800 mm turning speeds: 7,1-1120 U/min table surface area: 1200x1200 mm w-axis: 800 mm Radial face slide: 600 mm radial face slide travel: 200 mm Tailstock: mm angular milling head: digital readout: Heidenhain total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

conus taper: . mm The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 8500 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

HBM WHN 13.8 B, new 1986, CNC control system Heidenhain

x-travel: 1250 mm mm y-travel: 1000 mm mm z-travel: 600 mm mm Control: total power requirement: 25 Kw kW weight of the machine ca.: t dimensions of the machine ca.: m Brand Tos Machine no F641 Type SPEEDtec CNC Brand Siemens CNC Type Sinumerik 840D Year of make 2009 X 1.250 mm Y 1.000 mm Z 600 mm Intake HSK 100 Engine power 25 kW Speed 12000 RPM Tool changer Number of pallets 4 Outgoing ram Including manuals Speed maximum 12.000 RPM Maximum pallet load 4.000 kg Chip transport Tool magazine positions: 2x 40 , HSK 100 4 tables, 1x 1.000 x 1.250mm / 3x 1.000 x 1.000mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 500 mm, 8

MACHINE CNC .

Inv. Num. : 8204 Type: SK 12 Producer: TOS Created: 1953 Parameters: Max. turning diameter: 1350 mm Clamp plate diameter: 1180 mm Length: 2360 mm Width: 3860 mm Height: 4260 mm Weight: 18300 kg

spindle diameter: 130 mm x-travel: 3500 mm y-travel: 2000 mm z-travel: 1250 mm w-axis: 800 mm b-axis: 360 ° spindle turning speed range: 12,5-900 U/min Control: Heidenhain type: 155 table surface area: 1800x1600 mm Table load: 12000 kg spindle taper ISO: 50 width of T-slots: 22 mm T-slot - distance: 160 mm Feed: 1-6000 mm/min table rotating: 360 ° angular milling head: total power requirement: 80 KVA weight of the machine ca.: 36 t dimensions of the machine ca.: 7,7x7,2x4,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Siemens ... Sinumerik ONE Max. workpiece diameter ... 2200mm Table diameter ... 2000mm Max. table load ... 20000kg Max. workpiece height ... 1710mm Axis Z ... 1000mm Average of the sanding piece ... 180 x 200mm powered tools ... 15 Number of positions in the tool changer... 15 Main engine power ... 58kW L x W x H ... 6700x10400x6400mm Main motor power of driven tools ... 19.5kW Speed of driven tools... 8-3300 rpm Work feed ... 4000mm/min Rapid traverse ... 10000m/min Axis C ... 360° IKZ... 20bar Speed of the clamping plate ... 2-160 rpm Machine weight ... 32000kg Documentation Conveyor C Axis Coverage according to CE marking The machine has undergone a complete overhaul. More info on request. With 1 year warranty.

Inv. Num. : 8206 Type: WHN 13.4B Producer: TOS Created: 1986 Parameters: Control system: Mefi CNC 859 Work table length: 1600 mm Work table width: 1600 mm Maximum spindle speed: 800 1/min X-axis travel: 2000 mm Y-axis travel: 2000 mm W-axis travel: 1250 mm Spindle diameter: 130 mm Machine weight: 32000 kg 2024: Complete replacement of lubricating oil dispensers Spindle bearing repair (new bearings) Replacing the engine with an overhauled engine

Inv. Num. : 8211 Type: HJ8A Producer: TOS Created: 1964 Parameters: Working length: 3000 mm Vacuum belt width: 800 mm Working height: 700 mm Maximum table load: 670 kg Axis X: 800 mm Axis Y: 700 mm Axis Z: 250 mm Tensile strength: 1500 kg Weight: 12000 kg Machine dimensions: 2150 x 5720 x 2250 mm

TOS BUC 63A/3000 Cylindrical Grinding Machine Grinding Diameter 630 mm Grinding Length 3000 mm Height of centers 315 mm Workpiece Weight 2500 Kg Max. Grinding wheel dimensions 750 x 100 x 305 mm Spindle Speed 840/970 rpm Workpiece Spindle Speed 8 - 315 rpm Grinding support stroke 90 / 280 mm Table Speed: Variable - from 0.01 to 3.6 m / min Grinding Head Swivel 90 Degree Table Swivel +/- 5 Degree Work Head Tilts from 90 taper - Morse 6 Spindle Drive 15 KW Machine Dimensions 10000 x 3400 x 2000 mm Machine Weight 13.7 Ton Machine weight approx. 12 t Space requirement approx. 12 x 4.3 x 1.9 m Total power input 22 kW

Inv. Num. : 8239 Type: WHN 13 CNC Producer: TOS Created: GO 2004 Parameters: Control system: MEFI X-axis travel: 3500 mm Y-axis travel: 2000 mm Travel distances Z-axis: 1200 mm

spindle diameter: 130 mm x-travel: 3500 mm y-travel: 2500 mm z-axis: 1250 mm W-axis (spindle longitudinal): 800 mm : ISO 50 P.D.B : 1800x2500 mm : 12 t : 3000 Hertz : 400 total power requirement: 37 kW weight of the machine ca.: t dimensions of the machine ca.: m ATC 40 positions Safety guarding Coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Toshiba, Type: Programmable Controller, Modell: EX20-1MCRB5, Seriennummer: 5602167,

Manufacturer: Toshiba, Type: EX 40-4MCRD2, Modell: Programmmable Controller, Seriennummer: 94N-2025,

1 x CNC bench boring machine in cross-bed design Manufacturer: TOS Type WH13 CNC Year of manufacture 1997 Control: TNC 426 Heidenhain 5-axis X-3500 mm Y-2000 mm Z-1250 mm B-800 mm B-360 Degree Table clamping surface: 1600 x 1800 mm Table load: 12 t Spindle diameter: 130 mm Spindle mount: ISO 50 Spindle speed: max. 1500 rpm Condition: Very good. The machine was only used for repair purposes; no contract manufacturing. Spindle hours: 22,054 Program runtime: 15.661

Manufacturer: Tos Kurim Model: FSS 80 NC Year of Manufacture: 1988 Control: Heidenhain TNC 155 Swivel head Travel paths: X = 3000mm Y = 800mm Z = 800mm Spindle power = 20KW Speed: 200rpm SK50 Total power requirement: 40KW 380V Space required: Length = 7770mm Width = 3500mm Height = 2870mm Weight = 12.3t approx. Drive spindle Z: either spindle nut or spindle bearing defective. Find more here - / Contact us at -

TOS ,W 100 , YEAR 1976, SPINDEL MORSEA

Description Oil thermoregulator Max temperature: 150°C Heating power: 9 kW Pump power: 1.1 kW Pump flow rate: 0 - 60 l/min Tank capacity: 19 L

Description Oil thermoregulator Max temperature: 150°C Heating power: 9 kW Pump power: 1.1 kW Pump flow rate: 0 - 60 l/min Tank capacity: 19 L

Description Oil thermoregulator Max temperature: 150°C Heating power: 9 kW Pump power: 1.1 kW Pump flow rate: 0 - 60 l/min Tank capacity: 19 L

Description Oil thermoregulator Max temperature: 150°C Heating power: 9 kW Pump power: 1.1 kW Pump flow rate: 0 - 60 l/min Tank capacity: 19 L

Description Oil thermoregulator Max temperature: 150°C Heating power: 9 kW Pump power: 1.1 kW Pump flow rate: 0 - 60 l/min Tank capacity: 19 L

Description Oil thermoregulator Max temperature: 150 ° C Heating Power: 9 Kw Pump Power: 1.1 Kw Pump flow rate: 0-60 l / min Tank capacity: 19 l

Description Oil thermoregulator Max temperature: 150 ° C Heating Power: 9 Kw Pump Power: 1.1 Kw Pump flow rate: 0-60 l / min Tank capacity: 19 l

Description Oil thermoregulator Max temperature: 150 ° C Heating Power: 9 Kw Pump Power: 1.1 Kw Pump flow rate: 60 l / min Tank capacity: 19 l

Tos FA5AV X: 1400 - Y:420 - Z: 400mm Max longitudinal travel X-axe: 1400 mm Max cross-travel Y-axe: 420 mm Max travel Z-axe: 400 mm Admission in millinghead: ISO 50 Table size: 1600 x 400 mm Power needed: 20.5 kW Weight: 5300 kg

Producer TOS Tjechië Type FNK25A Table size 250 x 1300 mm Movement X=axis 800 mm Movement Y=axis 350 mm Movement Z=axis 450 mm Spindle taper SK 40 DIN 2080 movement quill 125 mm Spindle speed 56 -4500 Rev/min. Table feedrate X-Y-Z as Yes Voeding Pinole Yes Power 4 kW Dimensions L x W x H 2665 x 1980 x 226 mm Weight 1,760 Kg

spindle diameter: 130 mm x-travel: 4000 mm y-travel: 3000 mm z-travel: 2000 mm w-axis: 800 mm table:: 1800 x 2500 table load: 20 t feed range: 4 - 5000 mm/min spindle turning speed range: 10 - 3000 U/min spindle taper ISO: 50 spindle motor: 37 kW rapid traverse: 10 m/min Control: Heidenhain iTNC 530 total power requirement: 70 kW weight: 39 t range L-W-H: 8,5 x 8,6 x 5,5 mm equipped with - CNC control Heidenhein iTNC 530 & handwheel - 60-fold tool changer (ISO 50) - NC rotary table 1800 x 2500mm, 20t - IKZ and external coolant supply 20bar - chip conveyor - spindle support The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Make: Tos Machine No: F641 Type SPEEDtec CNC brand Siemens CNC type Sinumerik 840D Year of construction 2009 X 1,250 mm Y 1,000 mm Z 600 mm Mounting HSK 100 Motor power 25 kW Speed 12000 RPM Tool Changer Number of pallets 4 Outgoing Aries Including manuals Maximum speed 12,000 RPM Maximum pallet load 4,000 kg Chip transport Magazine slots: 2x 40 , HSK 100 4 tables, 1x 1,000 x 1,250mm / 3x 1,000 x 1,000mm

Inv. Num. : 8398 Type: OFA 71A Producer: TOS Generated: Parameters: Maximum module: 10 mm Maximum gear diameter: 710 mm Maximum table load: 1000 kg Number of teeth of bevel gear: 8-400 Machine height: 2400 mm Machine length: 3900 mm Machine width: 2600 mm Machine weight: 13500 kg Equipment: Set of interchangeable wheels Conveyor

Travel X/Y/Z/W: 1000mm/900mm/800mm/710mm, speed: 1400rpm, spindle diameter: 90mm, table dimensions: 1250mm/1250mm, max. table load: 3000kg, motor power: 7.5kW. X/Y dimensions: approx. 5500mm/7500mm, weight: approx. 11000kg, control: Newall DP700. Documentation available.

centre height: 350 mm weight of the machine ca.: 50 KG tool adaptor: MK5 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control: Heidenhain 355 tool adaptor: SK50 weight of the machine ca.: 8 t Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: Heidenhain 355 x-travel: 850 mm y-travel: 550 mm z-travel: 450 mm tool taper: SK50 hydraulic vise: documentation: weight of the machine ca.: 5,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.