tos fo 10 used for sale

Euromap: 1000-150/60; spessore stampo: 350; corsa piano mobile: 500.

Mitutoyo U-Clamp Gauge as good as new unused Mod. 105-408 Gauge 1000-1100 mm in the original List price 3450 €

screw size:45 mm injection shot weight in Polysterol:149 g/PS closing pressure:100 kN

Robust smoothing mill with a roll diameter of 1000 mm and a roll width of 800 mm, including drives and auxiliary drives. Current residual sheath thicknesses: 80 mm / 85 mm. Optionally available: 1 set of new roller shells.

average output 500 kg/h depending on materials and moisture content,, including : LOADING BELT, 1,4 Kw drive 7,0 mt.lomg x 0,9 mt.wide constructed in sturdy painted steel structure,, side walls,, PVC belt AGGLOMERATOR, 1000 mm. diam.steel barrel with infeed 115 kW, Hp 150 main engine, side door for inspection and knives replacement, replaceable inner lining 400 mm high grease lubricating system for engine bearings oil lubricating station for hub bearings, through automatic pump with oil pressure indicator bearing cooling system through circulating water, 0,75 kW oleodynamic power station electrovalve for closing/opening unloading door Hp 3,0 steam vacuum drive control switchboard and panel appx dimensions: L 3.470 mm.x W 1.500 mm. bent steel structure, electric motor DIAGONAL AUGER, 1,5 Hp drive diam +/-150 mm. – width +/- 1000 mm. – length +/- 1500 mm. – bolted upper cover, de-pre ...

SALDOFLEX MODULA M-2011 S, for T-shirt bags, open top bags, sealing width 1.100 mm, min/max bag length: 400/1.200 mm, 3 lanes, Unwinder: 1.700 mm, Film speed: 160 m/min, Cycles: 300 cycles/min, Servo drive, Photocell, Gusseting units, control panel, Constructed in 2007, totally refurbished in 2021, availability: immediate, working width: 1100, conditions: very good, type: T.shirt and open top bags 1.100 max sealing width

Hydr. Flat-form scissor lift table FLEXLIFT FLUNDER type 1500 / 100 (without hydraulic unit)Year of construction 1991Nominal load capacity 1500 kgLifting capacity (practically tested) 1000 kg (at approx. 350 bar)Platform size 2100 x 1400 mmStroke max. 930 mmOverall height - bottom 100 mm (with mounting frame)Overall height - top 1030 mmHydr. Operating pressure 350 bar = lifting capacity 1000 kgHydraulic engine power 1.5 kWNerg connection 400 volts, 50 Hz- mechanical-hydraulic safety limit switches stop the lowering process when the safety strip is operated -

Block DTT 10000 Transformer Manufacturer: Block Type: DTT 10000 10000 VA 50-60 Hz Schaltgr. Dyn 5 Code: 9129 IP:23 Primary: 500 V 12A Secondary: 399/231 V 380/220V 361/209V 15.15A HxWxD: 580 x 700 x 430 mm Weight: approx. 170 kg More items - new and used - can be found in our shop! International shipping costs on request!

NEW, 100 cm width, 125 kg heavy, with Weidemann attachment - 670 mm attchment width, 322 mm attachment height

Used slope bucket / ditch cleaning bucket, Working width: 100cm, with Lehnhoff MS01 recording

Container Size With Actual Configuration: 2 l // Number Of Heads: 5

STRAND PELLETIZER, 100 mm wide rotor,, 170 mm Ø,, for max n.12 strands, fixed pitch, for up to 200 kg/h capacity, 3,0 kW drive, belt transmission, speed variation through inverter, pneumatic piston to regulate pressure on roll, electric panel on the structure of the machine, hinged cutting chamber, can be totally opened, n.30 knives, Soundproof panel on cutter protection hood, Base mounted on wheels, User’s manual, CE compliance, Dimensions LxWxH 0,86 x 0,92 x 1,57 mt., Weight abt: 280 kg., installed power - used power in work: about 60-65% : 3,0 kw, availability: 60 working days from confirmation, working width: 100 mm, capacity: up to 200 kg/h, conditions: new machine, type: strand pelletizer

Geared motor, electric motor, three-phase motor, electric geared motor -Geared motor: from automatic cutting machine Bierrebi TA 103 -Manufacturer of gearbox: Bonfiglioli type MVF 49/P -Speed speeds: approx. 103 rpm i= 1:14 -Motor manufacturer: Electro Adda -Power: 0.18 kW / 1450 rpm -Design: B5 angle -Hollow shaft: Ø 25 x 80 mm -Protection class: IP 54 -Dimensions: 325/125/H175 mm -Weight: 7.9 kg

Die cutter, punching machine, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, row hole punch, punching machine, punch press -Manufacturer: Mubea, punch type KL 100 with 2-axis digital display -Pressure capacity: 100 tons -Punching performance: see photo nameplate -Projection: 535 mm -Material table: 1240 x 615 mm -Travel: x= 1100 mm / y= 600 mm -Digital display: Heidenhain 2-axis digital display -Accessories: incl. see photos -Total dimensions: 2200/2020/H2110 mm -Weight: 3145 kg

Short-stroke heavy-duty cylinders, high-pressure hydraulics, compact cylinders, light metal cylinders, high-pressure cylinders, universal cylinders, hydraulic cylinders, straightening cylinders, hydraulic rams, hydraulic pressure cylinders, lifting cylinders, pressure rams, hydraulic short-stroke cylinders -Manufacturer: Bahco, hydraulic cylinder lifting cylinder type CR 100-200 -Stroke: 150mm -Piston: Ø 100 mm -Pressure: max. 800 bar -Number: 5x cylinder available -Price per piece -Dimensions: Ø 300 x 430 mm -Weight: 93 kg/pc.

Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers, container dolly, heavy-duty trailers -Handover: in current condition as seen -Note: Pay attention to the condition of the wheels -Platform: 11,000/3000/H1070 mm -Load capacity: 100 tons -Steering: double -Drawbar length: 1500 mm -Drawbar eye: Ø 50 mm -Wheels number: 32 pieces -Wheel Size: 646/200-480 -Total dimensions: 12,300/3000/H1070 mm -Weight: 12200kg

Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, heavy-duty trailer -Platform: 11,000/3,000/H1,100 mm -Load capacity: 100 tons -Steering: possible on both sides -Drawbar length: 1500 mm -Drawbar eye: Ø 50 mm -Number of wheels: 32 pieces -Wheel size: 646/200-480 -Overall dimensions: 12,300/3,000/H1,100 mm -Weight: 12960 kg -Handover: in its current condition as inspected -Note: Check the condition of the wheels

Resistance, wire potentiometer, resistor, DC resistance, radio interference suppression choke, fixed inductors, interference suppression choke -Manufacturer: Fastron, radio interference suppression choke fixed inductors 1000 pieces -Type: MESC-101M-01 -Inductance: 100 µH / 1 A -Price: complete -Transport dimensions: 300/300/H100 mm -Weight: 2.9 kg

Punch, punching machine, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, row hole punch, punching machine, punching press -Manufacturer: Mubea, hole punch type KL 100 -Printing capacity: 100 tons -Punching capacity: see photo type plate -Thrust: 500 mm -Accessories: incl. see photos -Dimensions: 1460/880/H2100 mm -Weight: 2660 kg

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, transformer, auto-transformer -Manufacturer: Wuxi Madis, single-phase transformer type JBK3-1000VA -Power: 1000 VA -Technical data: see photo type plate -Dimensions: 150/150/H150 mm -Weight: 12.3 kg

Pallet trucks, special pallet trucks for high pallets, pallet trucks, pallet trucks, scissor pallet trucks, scissor lift pallet trucks, single-scissor lift pallet trucks -Manufacturer: Nobelift, Scissor lift pallet truck type 501-1008 -Load capacity: 1000 kg -Stroke range: 85-800 mm -Fork length: 1150 mm -Outer fork width: 540 mm -Dimensions: 1460/540/H1310 mm -Weight: 107 kg

Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester -Manufacturer: TGL, Manometer 0 - 10 bar, unused, original packaging -Type: 1/BM 20/2 160Ø 0-100 mWs -Number: 8x pressure gauges available -Price: per piece -Cardboard dimensions: 200/180/H70 mm -Weight: 1 kg/pc.

Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester, barometer -Manufacturer: TGL, Manometer 0 - 0.1 bar, unused -Type: Ø 160 mm 0-1000 mmWs -Quantity: 1x pressure gauge available -Dimensions: 200/160/H100 mm -Weight: 2.7 kg/pc.

Hydraulic press, two-column press, oil hydraulic press, hydraulic press, high-speed press, high-speed hydraulic press -Manufacturer: Hans Schoen, Hydraulic press type SH 100 -Pressing force: 100 tons -Motor: 11 kW -Clamping table: 580 x 440 mm / Bore Ø 150 mm -Max. insertion height: 435 mm -Projection: 650 mm -Max. stroke: 150 mm -Hole: Ø 50 mm -Dimensions: 1640/1300/H2650 mm -Weight: 4440 kg

Working length: 1020 mm Maximum sheet thickness: 2.5 mm Maximum opening width: 48 mm Bending angle: 0-135 ° Width: 1350 mm Overall width: 820 mm Height: 1140 mm Approximate weight: 285 kg FEATURES -Universal bending machine for sheet metal working and repairers -Sturdy construction in modern design -Easy adjustment of the upper beam by means of foot pedal, hands are free for the workpiece - manual bending machine for standard bending tasks -Segmented clamping beam for a large number of bending possibilities -Optimum price-performance ratio -Faster and easier bending operation via handle -Non-slip rubber coating on the foot pedal for safe working -Easy adjustment of the lower beam on the corresponding thickness -High upper beam for the manufacture of highly bent profiles Action price, including free home delivery to 1 address Germany (Mainland)

Milling Centre for EPS foams may be also applicable for other foams such as XPS, PUR, or other applications after conversion Platen length: 1000-1250 mm Plate thickness: 500-1250 mm Plate thickness: 40-250 mm including input and output; Unloading and stacking the plates stack Documents are available. A visit is possible after agreement at any time. Other machines and components for the production and processing of foams are available.

Naehmaschine Brother Exedra E-100 Mark II, Foot Lifter FB II, MD-816B; You buy an industrial naehmaschien from Brother Naehmachine Brother Exedra E-100 Mark II, Foot Lifter FB II, MD-816B, DB2-B737-413 380V

Qty. 1 Second-hand aluminium foil rolling mill plant Mfc.: Sambhav Built: 1993 - 2012 Revamped: 2015 Foil width: 1000 mm Entry thickness: 8 mm Exit: 8 microns Consist of: Melting furnace 22 MT Holding furnace 15 MT Strip caster Roughing rolling mill Intermediate foil mill Finishing foil mill Heavy slitter Strip slitter Foil separator Qty. 2 Foil slitters Annealing furnace

Mono-plate system Material:PE, PP, PS, ABS. Built: 1985, last modification: 2003 Screw diameter: 100 mm, L/D 36 Extruder with degassing, vacuum pump, melt pump, hydr. Screen changer, nozzle 1350 x 1.0 - 6.0 mm, 3 rolls smoothing unit 1350 x x 350 mm with single drives, 3 temperature control units for roller temperature control, cooling section, side cut, printwith 2 rubber rollers, top and bottom protective foil lamination, cross saw 1,350 mm, switch cabinets with air conditioning, separate control panel

Hot foil stamper, available now, fully workshop refurbished, ready to test • ELEVATED MACHINE Machine elevated 415 mm, included elevation of the steps • Step • Centerline for job quick change • Electronic device for sheet travel control • Air conditioning for the electrical cabinet • Gripper bars • Bobst-electronic for managing the machine • Motore principale con variatore di frequenza • Pianale porta-pila con leva per la correzione laterale manuale della pila durante la produzione • NON-STOP FEEDER MANUAL DEVICE • Adjustable lateral blowers with Centerline references • Suction unit with multiple adjusting • Safety system for lowering the pile try • Introduction table covered by antistatic steel stainless plate • Sheet synchronization adjustable during the machine is running for adapting feeder cycle to platin cycle • Feed belt slow-down device Ensures  ...

Leaching plant Riehle Comjet 101 Riehle flaudering machine (leaching machine+loading system) Type: Comjet for products such as pretzel, lye roll, lye knots, lye squirrels. minimum personnel input with maximum production volume adjustable belt speed Bandwidth 57 cm Embroidered trolley fully automatic elaudment process Lye shower Built in 2000 Footswitch Stainless steel cladding with 2 stainless steel wagons including 18 cloth pullers each Optionally you can buy up to 30 cars with 18 cloth pullers each

Tool Revolver 8-speed Mazak Quick Turn 10N Machine used, good condition from assembly of a MAZAK Quick Turn 10N CNC lathe My. 1985 satted with 8 tool-places Turret 290 mm Space requirement LxWxH: 580 x 460 x 380 mm Price is understood plus VAT freely loaded warehouse Casting - shipping possible after arrangement and assumption of costs Changes / errors in the technical data as well as intermediate sale reserved Seller Offer No. resale 8904

Technical data for the footplate: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Footplates, new Type designation: FT111 suitable for frame profile width 100 mm Material colour: RAL 5010 Gentian Blue Overall width: 175 mm Total depth: 105 mm Material thickness: approx. 6.00 mm Weight: approx. 1.06 kg | Pcs. Incl. the following mounting material: 02x Hexagon Bolts M10 x 30 mm 02x Nuts M10 04x Washers M10 Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

New, unused

Folding carton boarding machine Uhlmann C 100 LB • Format range folding carton B 30-100, H 15-75, L 70-200 mm • Capacity 10-80 folding cartons/min, clocked • For offset plug-in closure on both sides • Product feed for blister via blister stack shaft • Code reading Laetus Argus for 2x brochure code (front + back), 1x folding carton code, 1x brochure absence in folding carton • Brochure folding and inserting machine from the magazine GUK FA 21/4 Cartonac 91 • Colour embossing station for folding flap opposite the insertion side, 2-line, with embossing numbers • Poor ejection with ejection counter-control • Vacuum generators • SPS Eberle PLS 514 • Connection 400V/50Hz Optional: - New hardware/software Mitsubishi with 8" color Tuach Panel - Code reader Cognex - Validation documentation

Reference ID PP56956 Category Folder Gluer Manufacturer Bobst Model MEDIA 100 II-A2 Year Built 1999 Color - Impression - Working Hours - Speed - - Max. Size - Min. Size - Condition Good Location Europe Availability Immediately Machine Description Brand: BOBST Model: MEDIA 100 II-A2 Year of Manufacture: 1999 Origin: Switzerland Condition: 100% functional Machine Availability: Can be inspected on site in running condition Working Formats Maximum working width: 1000 mm Minimum working width: 126 mm Minimum board width before gluing: approx. 100 mm Maximum unfolded box length: 600 mm Minimum box length: 60 mm Maximum format: at least 600 mm Note: According to the operator, larger boxes may also be produced on this machine; final confirmation should be checked in the technical documentation. Example: A format of at least 600 mm can be processed, based on 150 mm x ...

- Pallet feeder T 1020 FP 112 - 1. Station T1020-1-1020/6 buckles - 2. Station T800-M-2-88/6 buckles - Z2 mobile cross fold station - DESTA FSA 1000 delivery (1996)

Hamburger forming machine, Sind, NEW Capacity: 1000 pieces / hour Hamburger forming diameter: 90 mm to 120 mm

A fully equipped line for the production of polypropylene yarn type Technorope 1000/100/PP-300: Manufacturer: Sima Srl Useful width of the cutting head: 1000 mm Capacity: up to 300 kg/h, depending on the type of yarn Twister: 16 (with 16 batteries) Yarn types: from 5000 to 120 000 denies

Polygraph kama folding glue machine with 3 points format 104

Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor -comes from: a Still forklift -Drive: 24 V 2 kW -Dimensions: 370/500/H350 mm -Weight: 82 kg

Capacity :10 tons, Weight of falling part,nominal mass of drop parts without upper instr.:9 tons, Effective working kinetic energy after blow :25000 kg mtr., Max. working ram stroke :1400 mm, Max no of blows : 30/min , Distance between slides : 1000 mm, Shut height : 775 mm , Ram size front to back :1200 mm, Bolster size front to back :1200 mm, Air pressure : 7-9 MPA , Height of instruments : 450 min., Die-holder front to back dimensions: 1400 mm, Height above floor level: 7270 mm, Hammer dimensions : 4400x10420x2700 mm, Weight (less anvil block): 73.5 ton, Weight of anvil block : 203.8 tons.

Foot switch, safety foot switch, foot pedal, foot controller, foot remote control, pedal controller, pedal switch -Manufacturer: Bernstain, Foot switch type F1-U1 UN -Voltage: 10A 500V-AC IP65 -Connector: 6-pin -Metal housing: with protective cover -Overall dimensions: 280/150/H760 mm -Weight: 3.3 kg

Key data: 1020 mm, 3 mm

Specifications • Sheet thickness max. 3.0mm • Working width max. 1020mm • Bending angle max. 120° • Opening width of the upper beam max. 160mm • Description: suitable for prototypes • Power: Manual operation • Dimensions: 2300 x 1600 x 1500 mm • Weight: 760 kg

Rheon Model KN100 Cornucopia Encruster. Maximum speed approx. 60 pieces per minute, depending on the product. Weight capacity from 10 - 90 grams. (2) 11.5" x 8" x 7" stainless steel feed hoppers, each with (2) 2.5" diameter feed screws. Approx. 5 inches wide discharge conveyor. Digital touch controls. Compact forming, filling and portioning machine Connection 400V, 16A-CEE plug Used machine from bakery

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipper, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1195 mm -Cross-section: 100 x 45 mm -Recording: see photos -Transport dimensions: 1370/610/H100 mm -Total weight: 112 kg

Food shelf, kitchen shelf, catering shelf -Dimensions: 1060/650/H1760 mm -Shelf spacing: 370 mm -Material: Aluminum -Weight: 42 kg

Nominal force, tf 1000 The slider does not reach BDC, mm 12.5 Slider stroke, mm 600 Frequency of continuous strokes, min-1 12...18 Highest frequency of single strokes, min-1 9...13 Closed height, mm 1500 Adjustment of closed height, mm 400 Slider dimensions, mm from left to right 4500 front to back 2500 Dimensions of the die plate, mm from left to right 4500 front to back 2500 Main drive electric motor power, kW 200 Overall dimensions, mm from left to right 6745 front to back 5400 height above floor level 9360 Weight kg 320000

Key data: 1000 mm

with foldable X-frame Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 1000 mm Sheet thickness steel: 0.8 mm Sheet thickness aluminum: 1.0 mm Sheet thickness front: 0.5 mm Colour: blue Dimensions: 1240 x 692 x 1150 mm Machine weight: 38 kg without roller scissors Opening width: 45 mm Bending Angle: 150 degrees Machine number: TB 3482