tornos enc used for sale

turning diameter over bed: 50 mm spindle passage: 26 mm turning length: 275 mm total power requirement: 12 kW weight of the machine ca.: 4500 kg CNC-Sliding Headstock Lathe, Opposite Headstock The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good technical condition, inspection and trial operation is possible by prior arrangement

IRON SA 25000 ENC sheet metal decoiler was built in 2025 in Italy by Iron Srl. The machine, designed to automate production, has been equipped with state-of-the-art technology, which ensures the highest precision in decoiling coil strip. These include a worm gear reducer with overload clutch, an epicyclical reducer and four self-centring clamps with hydraulic expansion. The machine is controlled by a inverter and feedback encoder, which in turn enables controlled electrical braking. All this is complemented by a sturdy construction made of top-quality steel. The offered IRON 25 t sheet metal uncoiler is brand new and unused. The price also includes a CST coil lift table for easy loading of the coil directly onto the machine arm. The IRON SA 25000 ENC self-centring decoiler is part of the RNM coil strip handling line. The system is customisable and can be equipped with devices such  ...

Originates from prominent pharmaceutical manufacturing in Europe. Fully enclosed and guarded structure – extra safety for operators. Working Description: Marchesini Pack Service PS300 semi-automatic case packer for small to medium output production requirements; suitable for: Contract Packing, Pharmaceutical, Cosmetics, Nutraceutical, Medical Devices and other industries. The pre-formed cases must be placed directly on the loading area. Cartons are fed by conveyor from the machine in front of PS300 into its stacking unit, where they are collated upwards, as it is programmed through the Operator Interface Panel. The case is then automatically fed and discharged on a free running conveyor. - Wide range of cases and products working sizes - Cases feeding area is entirely safe, free from any mechanical movement - Torque overloading control on ...

Housing/partition wall for Polar cutting machines or stackers; width 228cm; Height 180cm. Housing/dividing wall for cutting machines or lifters Polar; width 228cm; hight 180cm.

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Electric motor, three-phase motor -Power: 0.75 kW -Speed: 2805 rpm -Shaft: Ø 19 x 40 mm -Construction: B3 -Protection class: Ex -Dimensions: 270/155/H225 mm -Weight: 9 kg

Three-phase motor, electric motor -Power: 1.35 kW -Speed: 1425 rpm -Shaft: Ø 24 mm -Construction: B5 -Protection class: IP54 -Number: 2x available -Price: per piece -Dimensions: 420/200/H250 mm -Weight: 19.7 kg

Three-phase motor, electric motor -Power: 1.35 kW -Speed: 1410 rpm -Shaft: Ø 28 mm -Construction: B3 -Protection class: IP54 -Number: 3x available -Price: per piece -Dimensions: 385/205/H260 mm -Weight: 22 kg

Electric motor, three-phase motor -Power: 0.12 kW -Speed: 1375 rpm -Shaft: Ø 11 mm -Construction: B3 -Protection class: IP 54 -Price: per piece -Number: 4x available -Dimensions: 210/122/H190 mm -Weight: 4.25 kg

Signal pillars, signal lights, signal lamp, control lamp -Manufacturer: Patlite -Type: LU7-02 -Dimensions: 70 x 340 mm -Weight: 0.7 kg

Signal towers, signal lights, signal lamp, indicator light -Manufacturer: Patlite -Type: LU7-02 08X27P -Dimensions: 70 x 650 mm -Weight: 1.2 kg

Alsthom gecalsthom RX130HR1108 + encoder parvex TBN203R100

Description SICK - ENCODER Type: DFS60B-BDCA02500 Manufacturer code: 1060142

GAS BOILER 16MT Design pressure:18 Max working pressure:17 Test pressure:23.4 Operating water volume 25,400 Design code:TRD Manufacturing date:2013 Commercial: Mainie Harun (mainie@topglove.com.my) Noor Syaida (noor_syaida@topglove.com.my) Technical: Muhd Syahir (mhd_syahir@topglove.com.my) Nik Faris (nik_faris@topglove.com.my) Incoterm: EX WORK Currency: USD

General SKU345S1067 LocationBarneveld MakeEnco No.3385 Year of construction1994 Pressure Working pressure1 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume630 Ltr. Pressure1 Bar Specified Features - Pressure vessel MaterialStainless steel 1.4571 (316Ti) Capacity865 Ltr. Vessel sizesdia. 1000x1020 mm Dished topcheck Dished bottomcheck Top connectionsDN50 (2x), DN80 (2x), DN100 OutletDN50 Max. temperature200 °C With jacketcheck (25 Ltr.) Half coil jacketedcheck Max. temperature-5 °C Information Mounted on legscheck Floorspace1,2x1,2 m Total height1,75 mPressure vesselsEncoTanks > Pressure vesselsBrand > Enco What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Bar ...

General SKU345S1114 LocationBarneveld MakeEnco No.T4438-1 Year of construction2001 Pressure Working pressure9 Bar Main Features MaterialStainless steel Volume491 Ltr. Specified Features - Extraction ExtractorDecolorizing column Capacity491 Ltr. Diameter500 mm Length2500 mm Max. temperature150 °C MaterialStainless steel 1.4301 (304), Stainless steel 1.4571 (316Ti) Information Floorspace0,7x0,7 m Total height3,1 m Weight460 Kg Extra SpecificationsThe Decolorizing Column on offer is a top-notch device made by Enco in 2001. Crafted from stainless steel, including alloys 1.4301 (304) and 1.4571 (316Ti), the column is built to handle pressures of up to 9 Bar and can hold up to 491 liters. Standing at a diameter of 500 mm and a length of 2500 mm. It can handle temperatures up to 150 °C, making it versatile for various industrial uses. Despite its large capacity and effi ...

General SKU356S840 LocationBarneveld MakeENCO Energie Componenten GmbH (AT) Type509 ltr Pressure Working pressure3.2 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume509 Ltr. Pressure3.2 Bar Vacuumcheck Specified Features - Pressure vessel MaterialStainless steel 1.4571 (316Ti) Notified body(Tuv) Capacity509 l Vessel sizesdia.800 x 900mm Dished bottomcheck Top connections(3x)DN50, DN80, DN100, DN125, DN200 OutletDN50 Max. temperature160°C With propellor stirrerSemix 040 Motor0,5 KW, 400Volt (EEX e II T3) Speed mixing shaft690 rpm Information No.8317/2 Year of construction1996 Mounted on legscheck Floorspace1,1x1,1 M Total height2,5 M Weight600 KgPressure vesselsEncoTanks > Pressure vesselsBrand > Enco What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any de ...

Manufacturer: IMET Model: Velox 350 AF-ENC Year of Manufacture: 2017 Type of Machine : Circular Cold Saw Operating hours: 5,500 Blade diameter: 350 mm Blade arbor: 22 mm Blade speed: 3,600 rpm Feed travel: 520 mm, multiple passes Control: Electronic feed control (ENC) with front panel programming Condition: Used, fully functional Included Accessories - Extraction unit included - 6-metre roller conveyor for long profiles included Find more here - / Contact us at -

Manufacturer: 2 Lakierroboter Yaskawa, Type: ENCM und ERCS, Year: 2005/2007, Control: Yaskawa, Spraying heads - total: 2, Working width mm: 1500, Conveyour system: Transportwagen gesteuert, gesteuerte Achsen: 6, Ex-geschützt: yes, S-Achse Grad [°]: +/- 170, L-Achse Grad [°]: +/-120-65, U-Achse Grad [°]: +/-205-165, R-Achse Grad [°]: +/-190, B-Achse Grad [°]: +/-145, T-Achse Grad [°]: +/-360, Max.Tragkraft kg: 5, Max Drehmoment Nm: 3/8, Stainless steel design: yes, Spraying stations: 2, Colour circuits: 1, Laquer circles: 1, FREE TEXT: beide Anlagen Roboter sind gekoppelt einem Transportsystem für den Tisch, Year :2005/2007

General SKU300U900 MakeDott. Bonapace LocationBarneveld CEcheck TypeMC-50 Main Features MaterialStainless steel Specified Features - Powder filler MaterialStainless steel 1.4401 (316) Powder fillercheck Information No.01/04 Year of construction2004 With switchcheck Floorspace0,65x0,33 m Total height0,39 m Weight70 kg Extra Specifications50 cycles, Multigel vibrator unit, type MC100, 230 volt comes with :various plates. Powder fillersGeneric medicinesDott. BonapacePackaging machines > Powder fillersIndustries > Pharmaceutical > Generic medicinesBrand > Dott. Bonapace What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU212T119 MakeEnco No.3385/50.1 Year of construction1990 LocationBarneveld Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume8000 Ltr. Motor5.5 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity8000 Ltr. (max. 8650 Ltr.) Vessel sizesdia. 1800x3714 mm Dished bottomcheck Manholecheck DN450 Top connectionscheckDN50, DN100 OutletDN80 (3x) Half coil jacketedcheck (280 Ltr.) Max. temperature200 °C With paddle stirrercheck Motorcheck 5,5 kW, Speed mixing shaft59 rpm Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) Information Floorspace2,2x2,5 m Total height4,1 m Weight2000 kgPlastic & polymersCatalysts & fillersStainless Steel ReactorsSolventsDetergent & surf.Other pharmaceuticsCosmeticsLubricants & oleoSolid pharmaceuticsDyes & pigmentsBiophar ...

General SKU345S656 Make ENCO Energie Componenten GmbH (AT) No.T7178/1 Year of construction2011 LocationBarneveld Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket9 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume4250 Ltr. Motor5.5 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity netto 4250 Ltr,(bruto 5800 Ltr) Vessel sizesdia.1792 x1730mm Dished bottomcheck Dished top sidecheck ManholeDN450 Top connectionsDn100(2x), DN80, DN50(2x), DN25 OutletDN80 With jacketcheck185 Ltr Internal heating spiralcheck 135 Ltr Max. temperature-60 / 200°C With paddle stirrerSDR 30-06 V Motor5,5 KW, 230/400 Volt (EExdeIICT4) Speed mixing shaft93rpm Stainless Steel Reactors MaterialStainless steel 1.4539 (904L), Stainless steel 1.4571 (316Ti), Stainless steel 2.4602 (Hastelloy C-22) Information Floor ...

General SKU345S802 MakeEnco Energie Componenten (AT) No.T7201/1 Year of construction2011 LocationBarneveld Pressure Working pressure shell16 Bar Vacuum possible shellcheck Working pressure tubes16 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface13.5 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4571 (316Ti) Heat exchangercheck Horizontalcheck Notified body(TuV) Heating surface13,5 m2 Tube capacity50 Ltr Number of tubes:73 Tube diameter20mm Tube length3000mm Wall thickness tubes1.5mm Max. temperature-15/150 degr.C. Shell capacity90 Ltr. Cover connections(2x) DN50 Information Floorspace3,1x0,5 < Total height0,5 M Weight350 KG CEcheckSpicesPlastic & polymersShell and tube heat exchangersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf ...

General SKU345S646 MakeEnco Energie Componenten (AT) LocationBarneveld Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket9 Bar Main Features MaterialStainless steel Volume5350 Ltr. Motor2 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity5350 Ltr. Vessel sizesdia. 1800x2410 mm Dished bottomcheck Dished top sidecheck ManholeDN450 Top connectionsDN200, DN100, DN80, DN50 OutletDN80 With jacketcheck (120 Ltr.) Max. temperature200°C With paddle stirrercheck (Stelzer) Motor1,25/2 kW 380 Volt (Ex) Speed mixing shaft32/63 rpm Stainless Steel Reactors MaterialStainless steel 1.4539 (904L) Information No.3385/101.1 Year of construction1990 Floorspace2,1x2,1 m Total height2,5 m ATEX compatiblecheckPlastic & polymersCatalysts & fillersStainless Steel ReactorsSolventsDetergent & surf.Other pharmaceuticsCosmeticsLubricant ...

General SKU345S667 MakeENCO Energie Componenten GmbH (AT) No.3385 Year of construction1990 LocationBarneveld Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket9 Bar Main Features MaterialStainless steel Volume6300 Ltr. Motor3.6 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity6300 Ltr (8100 Ltr ) Vessel sizesdia.2000 x 2108 mm Dished bottomcheck Dished top sidecheck ManholeDN500 Top connectionsDN100, DN80 (4x), DN50 (2x), DN25 (2x) OutletDN80 (2x), DN25 With jacket(250 Ltr) Max. temperature200 °C With paddle stirrersigma SNR 25-06 Motor3,6 KW, 220/380 Volt Speed mixing shaft7,1-43rpm Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) Information Floorspace2,3x2 m Total height4 m Weight2400 kg Extra Specificationsbio reactor Plastic & polymersCatalysts & fillersStainless Steel ReactorsSolventsD ...

General SKU212T121 MakeEnco No.3385/52.1 Year of construction1990 LocationBarneveld Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure jacket9 Bar Main Features MaterialStainless steel Volume10000 Ltr. Motor2.2 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity10 000 Ltr (13 200 Ltr) Vessel sizesdia. 2400x3340 mm Dished bottomcheck Dished top sidecheck Top connectionsDN25, DN50 (2x), DN80 (4x) With jacket320 Ltr. Max. temperature200 °C With gate type stirrercheck Motor2,2 kW 230/400 Volt (Ex) Speed mixing shaft25 rpm Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) Information Floorspace2,8x2,8 m Total height3,4 m ATEX compatiblecheckPlastic & polymersCatalysts & fillersStainless Steel ReactorsSolventsDetergent & surf.Other pharmaceuticsCosmeticsLubricants & oleoSolid pharmaceuticsDyes & pigmentsBiopharm ...

General SKU356S847 LocationBarneveld MakeEnco Energie Componenten GmbH (AT) Type509 ltr Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket10 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume509 Ltr. Motor0.55 KW Pressure6 Bar Vacuumcheck Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4571 (316Ti) Stainless Steel Reactors Reactorcheck Capacity509 Ltr. Vessel sizesdia.800 x900mm Dished bottomcheck Dished top sidecheck ManholeHand hole DN200 Top connectionsDN125, DN100, (3x)DN80, DN50 OutletDN80 Half coil jacketed(64 lLtr.) Max. temperature-29/160 Degr.C, With propellor stirrercheck Motor0.55 kW 230/400 volt (Ex) Speed mixing shaft356 Rpm Notified body(Tuv) Capacity509 Ltr Vessel sizesdia.800 x900mm Dished bottomcheck With covercheck ManholeDN200 Top connectionsDN125, DN100, (3 ...

General SKU212T120 MakeEnco No.3385/42.1 Year of construction1990 LocationBarneveld Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume8000 Ltr. Motor5.5 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4571 (316Ti) Stainless Steel Reactors Reactorcheck Capacity8000 Ltr. (max. 8650 Ltr.) Vessel sizesdia. 1800x3714 mm Dished bottomcheck Dished top sidecheck ManholeDN450 Top connectionsDN50, DN100 OutletDN80 Half coil jacketedcheck (280 Ltr.) Max. temperature200 °C With paddle stirrercheck (EKATO, EM 2060) Motor5,5 kW 400 Volt Speed mixing shaft59 rpm Information Floorspace2,2x2,5 m Total height4,1 m Weight2000 kgPlastic & polymersCatalysts & fillersStainless Steel ReactorsSolventsDetergent & surf.Other pharmaceuticsCosmeticsLubricants & oleoSolid pharmaceut ...

see picture - on Anfr.

see picture - on Anfr. More: Tornos M 7

various accessories / spare parts for Tornos AS 14

GENERAL Project No.: 905433 Quantity: 1 pcs. Manufacturer: TORNOS BECHLER Type: MultiDeco 20/6 Control: Tornos Bechler Fanuc PNC Deco Year of construction: 2001 Condition: Used machine Machine on approx. (hrs): 77,725 Layers approx.: 2-3 layers DESCRIPTION TURN 18 axes turning diameter 20 mm 6 pcs. main spindle(s) speed main spindle 6000 1/min power main spindle at ED 10-40/100% 15 kW ADDITIONAL EQUIPMENT Splash guard cladding with fully encapsulated working area Lighting in the workroom Preparation for central oil/emulsion mist extraction system Hinged belt chip conveyor MAYFRAN Consep 2000 Machine is/was operated with oil Coolant device Automatic CO2 fire extinguishing system Bar feeder/bar loading magazine ROBOBAR MSF 522/6 GENERAL TECHNICAL DATA Total power requirement 43 kVA Machine dimensions (LxWxH) approx. 3500x1600x1950 mm Machine wei ...

Control Fanuc ... 32i - B Turning diameter ... 20mm Turning length... 250mm Axis Y Tool turrets/driven tools ... 39/15 Bar Feeder Spindle speed ... 0-12000 rpm Machine weight ... 3300kg L x W x H ... 2100.0 × 1200.0 × 1900.0mm The machine is in good condition, possible to test under power.

Bar diameter 26 mm 12 live tools Turning lenght 180 mm Controller FANUC 16i-TB Spindle speed 12.000 rpm With barfeeder

Inv. Num. : 8473 Type: AS14 Producer: Tornos Generated: Parameters: Max. rod diameter: 14 mm Maximum turning length: 3000 mm Number of spindles: 6 pieces Maximum main spindle power: 7.5 kW Maximum spindle speed: 6000 1/min Length: 2150 mm Width: 820 mm Height: 1466 mm Weight: 2500 kg

Manufacturer: Tornos Model: Deco 10 +LNS Year of Manufacture: 1999-2010 Find more here - / Contact us at -

This 5-axis TORNOS DELTA 20/4 Swiss Type Turning Machine was manufactured in 2011. It features a 3m ROBOBAR bar feeder, chip conveyor, and FANUC control. Main and counter spindles support a max diameter of 20mm and speeds up to 10000 rpm. Ideal for precision turning, consider the opportunity to buy this TORNOS DELTA 20/4 horizontal turning machine. Contact us for more information about this machine.

This TORNOS DECO 2000/13 was manufactured in 1999. It features a bar passage of 16 mm and supports up to 20 fixed and 16 rotating tools. Equipped with an IEMCA loader, CONVEYORS IND. ASS. conveyor, and additional oil filter tank, this machine ensures efficient operation. Consider the opportunity to buy this TORNOS DECO 2000/13 swiss type turning machine. Contact us for more information about this machine.