torn used for sale

The machine is in good technical condition, after prior agreement it is possible to test it. with a bar seller, 65 mm draw tube passage, Sauter revolver, driven tools, hydraulic tailstock, it is after GO, new draw cylinder for clamping tools, still connected in operation, including draw tube inserts, tool holder, etc.,

CNC plasma cutting system working range: 1500 x 3000mm OTC Superplasma 12000 Cutting up to 20mm quality cutting New control ProDNC from Micompan data transfer via USB; ready to use

see picture - on Anfr. More: Tornos M 7

see picture - on Anfr.

High-pressure cleaning device, high-pressure rinsing, high-pressure washer on hot-dip galvanized and painted high-quality steel frames with forklift slacks. PTC Tornado 60/200, 75/150, 75/210, 84/190 and 102/150 similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Tornado 60/200 | 60l/min. at 200bar | Engine: Kohler KDW 1404 26kW Tornado 75/150 | 75l/min. at 150bar | Engine: Kohler KDW 1404 26kW Tornado 75/210 | 75l/min. at 210bar | Engine: Kohler KDW 2204 37.5kW Tornado 84/190 | 84l/min. at 190bar | Engine: Kohler KDW 2204 37.5kW Tornado 102/150 | 102l/min. at 150bar | Engine: Kohler KDW 2204 37.5kW DIMENSIONS / WEIGHT: Dimensions and weight with 680l water tank LxWxH: approx. 2.300x1.310x1.310 mm, approx. 640 kg Dimensions and weight with 1000l water tank LxWxH: approx. 2.300x1.310x1.630 mm, approx.  ...

Key data: 530 mm, 500 mm, 4000 1/min

Machine Details Stock-No. 1105-04005 Type of machine CNC Lathe Make COLCHESTER Type TORNADO 300 Year of manufacture 1995 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Great Britain Delivery time immediately Freight basis EX WORK Price Technical details turning diameter 530 mm turning length 500 mm control FANUC OT total power requirement 22 kW weight of the machine approx. 3.3 t Additional information GOOD MACHINE CNC CONTROL FANUC OT Cuck Taikstock VDI 40 Turret 12 P Chip Convoyer echnical information Swing over bed 530 mm Swing over cross-slide 330 mm Distance centre tot centre 500 mm Max longitudinal travel Z-axis 20 m/min Max cross travel X-axis 10 m/min Spindle cone A2-8 Dia of spindle bore 90.5 mm Power on the spindle 22 kW Number of speeds 4000 rpm Command Fanuc Total power needed 53 kVa Length 3500 mm Wid ...

various accessories / spare parts for Tornos AS 14

Hammer mill Tornado THM 90 A for waste grinding Power 15 kw Hopper with reel, dosing screw, control box Complete with all attachments Good condition

Mori Seiki NL 2500 SY / 700 Lathe :::TECHNICAL SPECIFICATIONS::: CNC Model: Mori Seiki CNC Version: MSX-850 III Main spindle nose: ASA 8 Main spindle power: 18.5Kw Main spindle bar pass: 80mm Turning diameter: 360mm Turning length: 705mm Main spindle speed: 4000 Number of tool turrets: 1 Number of tool positions for the first turret: 12 Number of Motorized First Turret: 12 First turret X-axis travel: 260mm Y-axis travel first turret: +- 50mm First turret Z-axis travel: 795mm Fast feeds for linear axes X Y Z: 30m/min Sub-spindle: yes Spindle nose: ASA 6 Number of counter-spindle speeds: 6000 Counter spindle power: 11Kw Bar loader model and brand: Iemca Master 880 Chip conveyor: belt Presetting: yes Machine equipment: Set of fixed and motorized tool holders :::D DIMENSIONS AND WEIGHT::: Length: 4420mm Width: 2 ...

PFM Flow wrapper Model: Tornado-BBLDSS Serial: C-6096 2001, Stainless, The Tornado LD is a horizontal flowrapping machine that produces up to 100 packs/min with hermetic seals from a flat reel of heat seal wrapping material. The Tornado LD is specifically designed for M.A.P.” (Modified Atmosphere Packaging). with smartdate X40 coder, infeed length 2400mm, flow wrapper length 3200mm, jaw width 220mm, various belt for infeed, 3Ph

Machine Details Stock-No. 1105-03856 Type of machine CNC Lathe Make COLCHESTER Type TORNADO T 6M Year of manufacture 2006 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Great Britain Delivery time immediately Freight basis EX WORK Technical details turning diameter 440 mm turning length 450 mm control FANUC 21 ITB total power requirement 15 kW Weight of the machine approx. 4 t Additional information NICE COLCHESTER T 6M FROM 2006 FANUC 21 ITB CUCK TAILSTOCK SWARF CONVEYOR VDI 30 TURRET 12 P LIVE TOOLS BARFEEDER MBF 1000 INCLUD

Control Fanuc ... 32i - B Turning diameter ... 20mm Turning length... 250mm Axis Y Tool turrets/driven tools ... 39/15 Bar Feeder Spindle speed ... 0-12000 rpm Machine weight ... 3300kg L x W x H ... 2100.0 × 1200.0 × 1900.0mm The machine is in good condition, possible to test under power.

COLCHESTER TORNADO 110 CNC turning center was built in England in 1998. The machine, designed for precision machining of workpieces with a maximum diameter of 420 mm, features a fully illuminated work space that includes among others a 12-position turret and an extremely powerful spindle. The inclined bed by 60° ensures excellent stability of the process, during even the most intense challenges. On top of this, the intuitive GE FANUC Series 21i-T CNC control allows advanced machining programmes to be created in just a few steps. The TORNADO 110 CNC lathe weighs 2400 kg. Technical specifications of the COLCHESTER TORNADO 110 metal lathe - CNC controller: GE FANUC Series 21i-T - feed in the X/Z axis: 310/416 mm - rapid traverse in the X/Z axis: 15/20 m/min - load on the X/Z axis: 2.51/3.77 kN - turning diameter over bed: 420 mm - turning diameter over slide: 280 mm - maximum tur ...

COLCHESTER TORNADO 100 CNC turning center built in 1995 in England is used for precision machining of workpieces with a maximum diameter of 420 mm. The machine features a large, fully illuminated workspace with a 12-position turret and an extremely powerful spindle. The 60° inclined bed ensures remarkable process stability, even during the most intense challenges. This is completed by the intuitive CNC control in which all machining programmes are created in just a few steps. The TORNADO 100 CNC lathe weighs 2400 kg. Technical specifications of the COLCHESTER TORNADO 100 metal lathe - CNC controller - HMI panel: VILUX - feed in the X/Z axis: 180/350 mm - rapid traverse in the X/Z axis: 10/15 m/min - turning diameter over bed: 420 mm - turning diameter over slide: 297 mm - maximum turning diameter: 186 mm - maximum turning length: 350 mm - maximum spindle rotational speed: 60 ...

The machine can be viewed under power by appointment. Subject to changes and errors in the technical data and specifications, as well as prior sale!

The machine can be viewed under power by appointment. Subject to changes and errors in the technical data and specifications, as well as prior sale!

swing dia.: 440 mm max. turning diameter: 220 mm turning length: 450 mm travel -x axis: 200 mm control: Fanuc 18i-TB max. helix angle: 60 ° spindle bore: 64 mm tool taper: VDI 30 numbers of positions in the tool changer: 12 CNC Lathe | COLCHESTER - TORNADO T6MS equipped with counter spindle and chip conveyor. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: T6 MS | T6-MS | T 6MS | T-6MS | T-6 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. swing diameter over bed: 510 mm max. turning diameter: 260 mm Max. Turning length: 540 mm travel -x axis: 240 mm center height over bed: 260 mm control: FANUC 21i-TB spindle bore: 77,5 mm no. of tools in turret: 12 x tool taper: VDI 40 CNC Lathe | COLCHESTER - TORNADO T8 The machine is in good condition. Please refer to further technical details in the attachement of the offer. A machine video will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: T 8 | T-8 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bar diameter 26 mm 12 live tools Turning lenght 180 mm Controller FANUC 16i-TB Spindle speed 12.000 rpm With barfeeder

The machine can be viewed under power by appointment. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Manufacturer: Biesse, Type: Tornado S 1300, Year: 1998, Control: Progrann, Work piece length max mm: 3000, Work piece length min mm: 300, Werkstückbreite max mm: 1300, Number of stacks: 2, Taktleistung ca.: 12, Compressed air bar: 6, Total power kW: 20, Number of sucking lines: 2, Feeding speed max m/min: 25, Feeding speed continous adjustable: yes, Erection in a pit: no, Wight approx. kg: 6000, Year :1998

turning diameter over bed: 50 mm spindle passage: 26 mm turning length: 275 mm total power requirement: 12 kW weight of the machine ca.: 4500 kg CNC-Sliding Headstock Lathe, Opposite Headstock The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A hardly used Netzsch rotary lobe pump is available. Flow rate: 30m³/h, max. pressure: 2bar, max. temperature: 80°C, design: block design, number of poles: 6, operating hours: approx. 5h. Documentation available. On-site inspection is possible.

The machine is in good technical condition, inspection and trial operation is possible by prior arrangement

Inv. Num. : 8473 Type: AS14 Producer: Tornos Generated: Parameters: Max. rod diameter: 14 mm Maximum turning length: 3000 mm Number of spindles: 6 pieces Maximum main spindle power: 7.5 kW Maximum spindle speed: 6000 1/min Length: 2150 mm Width: 820 mm Height: 1466 mm Weight: 2500 kg

used screening machine, function-tested, immediately available

Cleaning and disinfection station ARJO Tornado 241x60x90 cm Cleaning and sanitizing station for emptying, cleaning and sanitizing bedpans, urine bottles or other containers for human excretions. Sink left with folding grate 48x60x70 cm, sink right 60x45x30 cm, 2 doors right, middle compartment 95 cm wide with intermediate shelf, central washer and disinfector Arjo Tornado, 230 V, plug-in ready, model SP1000 SEV0709031

This 5-axis TORNOS DELTA 20/4 Swiss Type Turning Machine was manufactured in 2011. It features a 3m ROBOBAR bar feeder, chip conveyor, and FANUC control. Main and counter spindles support a max diameter of 20mm and speeds up to 10000 rpm. Ideal for precision turning, consider the opportunity to buy this TORNOS DELTA 20/4 horizontal turning machine. Contact us for more information about this machine.

The machine is in good technical condition, testing is possible by prior arrangement.

This TORNOS DECO 10a was manufactured in 2003. It features a movable headstock, directional spindle stop, and multiple cross-slides with tool holders for versatile machining. Equipped with a counter-spindle and programming software in five languages, its ideal for complex turning tasks. Includes interfaces for bar feeders and tool breakage detection. Reach out for more information about this machine.

bar material dia.: 20 mm spindle passage: 22 mm turning length: 170 mm turning speeds: 10.000 U/min positive location each: C-Achse 0,001° Grad gripping station: 20 positive location each: 1° Grad turning speeds: 10.000 U/min number of tools: 7+4+8 number of milling stations: 3 control: Fanuc Oi-TD turning length: 170 mm Number of axles: 5 St. spindle hours: 16.000 h Number of working hours: 35.000 h total power requirement: 11 kW weight of the machine ca.: 1900 kg dimensions of the machine ca.: 1,64 x 1,2 x 1,73 + SBF m bar loader: Robobar SBF 320e 3200mm Stange parts conveyor: nein oil mist filter: ARO swiss type machine Tornos Delta 20/5, built 2011, with barloader Robobar SBF 20e Excellent conditions,from precision engineering The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 8-axis Tornos-Bechler Deco 20a was manufactured in 2002. A Swiss type turning machine featuring a max turning diameter of 20mm, equipped with a Fanuc control system, motorized tools, main and sub-spindle, and a ROBOBAR SSF automatic bar loader. Includes tool holders and collets. A great opportunity to buy this Tornos-Bechler Deco 20a Swiss type turning machine. Contact us for further details regarding this Swiss type turning machine.

Overview  This cold glue labelling machine was manufactured in 2005 by German company HEUFT. The machine is no longer in production use and is now available for sale. It includes two integrated laser coders for date marking and supports a wide range of bottle formats. Ideal for high-speed beverage production environments. Technical data  Capacity: Up to 60,000 bottles per hour Formats: Supports 11 bottle formats From 0,3l - 0,66l Steini, NRW, Longneck Container types: Glass, not transparent, non-contoured Container diameter: 60.4 – 69.1 mm Container height: 174 – 270 mm Label positions: Front (up to 2 labels) Back (up to 1 label) Label size range: Width: 70 – 111 mm Height: 33 – 100 mm Band height: 1100 mm Max. ambient temperature: 40°C Power connection: 400 V Machine design: Straight version, size L (approx. 3360 mm wide) Bottle carousel diameter: 1610 mm Number of bottle pla ...

This TORNOS DECO 2000/20 was manufactured in 1998. A robust Swiss type turning machine, it features a bar passage of 25.4mm and can handle up to 21 fixed and 15 rotating tools. It includes an IEMCA loader and a conveyor system, enhancing its operational efficiency. Consider the opportunity to buy this TORNOS DECO 2000/20 Swiss type turning machine. Contact us for more information about this machine.

Table sizes: 3000 x 850 mm. Motor: 3 kW Belt sizes: 150 x 7800 mm. Motorised height adjustment

This 5-axis TORNOS DELTA 20/4 was manufactured in 2010. It features a FANUC control system, a 3m ROBOBAR bar feeder, and a chip conveyor. Capable of handling a max diameter of 20mm and a length up to 170mm, with spindle speeds up to 10000 rpm. Ideal for precision turning, consider the opportunity to buy this TORNOS DELTA 20/4 horizontal turning machine. Contact us for more information about this machine.

This TORNOS DECO 2000-10 was manufactured in 1999. It features a loading magazine with drum, integrated hydraulic unit, and supports both front and rear with a center height of 1100 mm. It includes a movable headstock, directional spindle stop, and cross slide with tool holders. Ideal for precision turning, it operates on AC drive motors with an absolute measuring system. Contact us for more information about this machine.

This TORNOS DECO 2000 swiss type turning machine was manufactured in 2000. It features a movable headstock, directional spindle stop, and cross slides with tool holders. Includes an independent counter spindle, lubrication device, and a loading magazine with drum. Equipped with a HYBRIDE 10+5 drum for bars up to 10 mm and an integrated hydraulic unit. Contact us for more information about this machine.

Technical data IEMCA ELITE 112, built in 2012: Manufacturer: IEMCA Model: ELITE 112 Year of manufacture: 2012 According to the manufacturer, the ELITE 112 series is designed for machining thin bars and, depending on the version, covers a range from 0.8 to 12.7 mm. The machine can be viewed by appointment. We reserve the right to make changes and corrections to the technical data and specifications, and to sell the item in the meantime!

This TORNOS DECO 10a was manufactured in 2006. It features an integrated bar loader with a maximum bar length of 3.2 m and a bar capacity ranging from 2 to 10 mm. The machine includes a Robobar SSF 3m loading magazine and a FANUC 16i-TB control system, ensuring precise and efficient operations. Ideal for intricate Swiss-type turning tasks. Contact us for more information about this machine.

Technical data for BARBOY Type 29-AA-1 bar feeder: Manufacturer: BARBOY Type: 29-AA-1 Equipment type: Bar feeder Feeder length: 3,000 mm The machine can be viewed by appointment. We reserve the right to make changes and corrections to the technical data and specifications, and to sell the item in the meantime!

Swiss type turning machine manufactured in 2006. This TORNOS DECO 10a features an automatic and integrated bar loader with a maximum bar length of 3.2 m and a bar capacity ranging from 2 to 10 mm. It includes a Robobar SSF 3m loading magazine and is equipped with a FANUC 16i-TB control system. If you are looking to get high-quality turning capabilities, consider the TORNOS DECO 10a machine we have for sale. Contact us for further details.

Article: CNC-controlled multi-spindle automatic lathe Manufacturer: Tornos Type: MultiSwiss 8x26 Yob: 2016 full cross slide configuration, counter spindle, part-pre-drawing device, 2 x driven tools, 3 x Y-axis, 1 rigid backworking, 1 x driven backworking, 2x 80 bar high pressure pumps optional: setting robot, manufacturer HandlingTech. The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com