tor used for sale

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN MillPlus /3R-WorkMaster +3R-WorkShopManager Operating hours: 30452 Technical data Number of axis simultaneous: 5 Number of tables: 1 Number of spindles: 1 Circulary table diameter: 630 mm Number of T-channels: 9 Distance of the T-slots: 63 mm T-channel width: 14H7 mm Centering bore diameter: 50H6 mm Longitudinal travel (X-axis): 600 mm Transversal travel (y-axis): 700 mm Vertical travel (z axis): 600 mm Dimension of the workpice: Height: 1000 mm Diameter: 920 mm Table load max.: 500 kg Table divisions (B): 360 ° A axis Swivel angle (a-axis): +45/-30 ° Holding torque A-axis: 3866 Nm Clamping torque C-axis: 6008 Nm Torque max.: 2650 Nm Tool changer: Number of tools: 180 Tool diameter: 80 mm Diameter with free adja ...

Guildmaster CTX 210 2005 Turning diameter: 290mm Turning length: 300mm Orbital diameter over bed: 380mm Main spindle Speed range: 20-6000 min/-1 Max Torque: 79/72Nm max. feed diameter: 165mm Spindle diameter in front bearing: 90mm Rod diameter: max. 45mm C-axis: 0.04° Holding moment: C:112Nm Tool turret: Number of powered tools: 12 pos. Shank diameter: 30mm Speed range: max. 5000 rpm Clamping diameter driven tools: max. 16mm Travel X-axis: 160mm Z-axis: 305mm Riding pole travel: 370mm Feeds: Rapid response: X 20 m/min Rapid response: Z 30 m/min Rapid response: C 100 m/min

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 840 D Operating hours: 76500 Technical data Number of spindles: 2 Number of revolvers: 2 Swing over bed: 240 mm Spindle hole: 65 / 42 mm Turning diameter: 200 mm Bar diameter: 65 / 42 mm Clamping chuck diameter: 200 mm Turret carriage: Longitudinal travel (Z-axis): 555 mm Transversal strocke (X axis): 190 mm Transversal travel (y-axis): +/-40 mm Carriage:: 2 Longitudinal travel (Z-axis): 555 mm Transversal strocke (X axis): 190 mm Turret carriage: Number of positions turret 1: 12 Number of positions turret 2: 12 Driven tools turret 1: 12 Driven tools turret 2: 12 Spindle speeds: 40-4000 rpm Main spindle: C axis (spindle,resolution): 0.025 ° Spindle speeds: stepless from: 25 rpm up to: 5000 rpm Torque max.: 200 Nm Back spi ...

Turning diameter 320 mm Turning length 450 mm Control HEIDENHAIN Circulation diameter over slide 260 mm Travel - x 160 mm Travel - z 450 mm Speed range - main spindle 5,000 rpm Drive power - main spindle 11 / 7.5 kW Max Torque 76 / 112 Nm Turret head (x-fold) 12 pos

Machine type MIG/MAG inverter welding system without BiPower Make Merkle Type MobiMIG 280 K Connection voltage 3 x 400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed gearbox 4-wheel transmission DV 26 Fuse 16 Ampere Dimensions L x W x H 470 x 255 x 545 mm Special accessories ColdMIG welding process, e-welding MIG soldering, filler wire welding Weight 27 kg Age 12 months Condition workshop-tested, very good, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer Argon with 2 pressure gau ...

Machine type MIG/MAG inverter welding system Make Merkle Type MobiMIG 180 K Connection voltage 1 x 230 volts Adjustment range 25 - 180 amperes Switch-on time 20% ED at 180 amperes 60% ED at 110 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed gearbox 2-wheel transmission Fuse 16 Ampere Dimensions L x W x H 450 x 210 x 480 mm Special accessories ColdMIG welding process E-welding, MIG soldering Filling wire welding Weight 17 kg Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 157 G, 3 mtr. Long 1 piece ground cable 1 piece pressure reducer Argon with 2 pressure gauges 1 roll welding wire D-200 coil, 5 kg 1 can  ...

Machine type MIG/MAG inverter welding system with bi-power setup Make Merkle Type MobiMIG 280 K - BiPower Connection voltage 230/400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed gearbox 4-wheel transmission DV 26 Fuse 16 Ampere Dimensions L x W x H 470 x 255 x 545 mm Special accessories ColdMIG welding process, e-welding MIG soldering, filler wire welding Bi-Power Setup Weight 27 kg Age 12 months Condition workshop-tested, as new, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories 1 piece welding torch SBT 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reduc ...

Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0   Positions ATC: 0   CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 840 D Operating hours: 75960 Technical data Number of axis simultaneous: 5 Number of tables: 1 Number of spindles: 1 Table load max.: 800 kg Longitudinal travel (X-axis): 800 mm Transversal travel (y-axis): 750 mm Vertical travel (z axis): 620 mm Dimension of the workpice: Height: 550 mm Diameter: 500 mm Table divisions (B): 0,001° ° A axis: 145° (+35/-110°) Table speed: 30 rpm Pallets:: System Staflex number: 4 Length: 500 mm Width: 500 mm Transport weight: 200 kg Tool changer: Number of tools: 60 Tool diameter max.: 120 mm Diameter with free adjacent pockets: 200 mm Tool lenght: 400 mm Max. tool-weight: 15 kg Spindle nose:: HSK-A 100 Spindle speeds:: STEP TEC stepless up to: 12000 rpm Torque max ...

For smaller containers instead of tripod agitators: Agitator REITZ RW0251440200 with 0.25 KW / 1440 rpm and inclined blade stirrer With traverse made of aluminium profiles 45 45 mm. Electric motor: 3 x 230/400 volts, 50 Hz, 0.72 A current, 0.25 kW, 1.66 Nm torque, n = 1440 rpm, IP69K, shaft 20 x 40mm, weight approx. 10 kg. Motor protection socket with switch. Shaft: precision stainless steel shaft D20, length 500 mm, diameter 20 mm, Material stainless steel 1.4571 Coupling: Rigid clutch, bare, material stainless steel 1.4571 Stirrer: Two-wing welded inclined blade stirrer, diameter 200mm, material stainless steel 1.4571

Machine type MIG/MAG welding system Make CEBORA Type MIG STAR 550 S Plant No. 991502 Connection voltage 3 x 400 volts Setting range 40 - 500 amperes Switch-on time 60% ED at 500 amperes 100% ED at 390 amperes Current setting 32 switching stages Cooling transformer due to built-in fan Cooling burner water-cooled Execution of mobile industrial plant with separate DV-case Wire feed gearbox 4-wheel drive Fuse 32 Ampere Dimensions L x W x H 1,000 x 500 x 1,250 mm Weight 190 kg Age approx. 25 years Condition workshop-tested, good, incl. UVV test protocol Special accessories 3 x throttle pick-ups Scope of delivery Welding system with the following accessories: 1 piece welding torch 3 mtr. Long 1 piece ground cable 1 piece pressure reducer Argon with 2 pressure gauges 1 piece spare part box kpl. Equipped 1 piece user manual Warr ...

1.1. Tacchi turning lathe Model DB 1900 x 10.000 Series 132 L • CNC Sinumerik 840 DE-SL • Centre height from the ways 1,900 mm • swing over saddle 3,050 mm • Swing over bed, without telescopic covers 3,300 mm • max. work piece weight 40,000 kg • Min. and max. distance between headstock and Tailstock without steady rests 500 – 10.000mm • Main headstock o Diameter face plate 3.000 and additional 1.000mm o Integrated C-Axis o Drive power S1 (100%) 95 kW o Range of spindle speed 1 – 400 rpm o Number of speed ranges 3 o torque 80,000 Nm o Spindle nose DIN 55026 20" o Spindle hole 160mm • Tailstock o Quill diameter 450mm o Quill stroke 200mm o Internal taper Metric 100 at 60° • Equipment o 12-position live tool turret  Station diameter VDI 620mm  Power 18.5 kW  Max torque 400 Nm  Max speed 1,500 rpm o Y-axis  Vertical  ...

Machine type MIG/MAG welding system Make Merkle Type CompactMIG 220 K Connection voltage 3 x 400 volts Setting range 25 - 220 amperes Switch-on time 40% ED at 220 amperes 60% ED at 170 amperes Current setting 7 switching stages Cooling transformer due to built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed 4-wheel gearbox DV 26 Fuse 16 Ampere Dimensions L x W x H 870 x 480 x 740 mm Weight 90 kg Special Accessories Display Automatic wire Age 12 months Condition workshop-tested, as new, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 157 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield  ...

Description the grey cast iron machine frame convinces with stability and torsion alimness, precise guides and excellent workmanship all guideways are reliably supplied with lubricant by an automatic central lubrication the working area is protected by an easily accessible enclosure the high-performance coolant pump is combined with the suction unit and binds the resulting grinding dust and aerosol during processing Grinding spindle the grinding spindle is large in size, dynamically balanced, completely sealed and permanently lubricated Prestressed precision bearings enable maximum grinding performance and reliability for many production hours Programming the high-quality ball-circuit spindle and the powerful servo motor guarantee precision and repeatability of positioning in the Y-axis for set-up work and for the manual process of the grinding spindle, th ...

GeneralVertical Machining Centres; Control: Control F0iMF CharacteristicsTable surface1400 x 560 mmMovement X / Y / Z1100/560/510 mmSpindle taperBT 40 Tool Magazine with60 PositionsDrive power (25% DC)15 kWDrive power (100% DC)11 kWSpeed max.12000 rpmMaximum load (table centre)1000 KgRapid feed X / Y / Z36/36/30 m/minDimensions (L x W x H)3,19 x 2,76 x 2,94 (3,82 x 3,58 x 3,01) mWeight approx.5500 KgStandard spindle 12,000 min-1, 15/ 11 kWStandard Spindle 12,000 min-1, 15/ 11 kW Spindle speed: 12,000 min-1 Output: 15/13/11 kW (20/17.33/15 HP) (25%ED/30min/cont) Torque: 119/70/57 Nm (87.76/51.62/42.04 ft·lbf) (25%ED/30min/cont)Spindle Taper 7/24 Taper #40/ Grip MAS Spindle Taper 7/24 Taper #40/ Grip MAS This specification uses the spindle No. 40 7/24 taper / Grip MAS tool holder. The grip type and retention knob type of ATC are specified separately.Retention Knob: Special (Center-Throug ...

Drilling capacity: 100 mm Radius: 2200 mm Spindle taper: 110   MACH-id     5304 MAKE          SAS Torino TYPE            TM 1900 YOP               1981 SPECIFICATIONS Max. drill Ø steel    100 mm Max. drill Ø cast      100 mm Stroke pinole            550 mm Throat       2400 mm Column sleeve      500 mm Quill Ø       110 mm Spindle Taper ISO/Bt/Mk         6 ISO/Bt/Mk Speeds / ranges        1275 Rpm Table Length          2215 mm Table Width            1180 mm Power        11 kW Max. distance spindle - table  &nbs ...

Rounds: 105 mm Squares: 0 mm Flats: 0 mm Flats on edge: 0 mm Angles: 0 mm (1) horizontal / (2) vertical: 1   MACH-id      3629 MAKE           PBT Swiss TYPE            35 YEAR          2004 SPECIFICATIONS Hydraulic / Mechanical    Hydraulic    Horizontal / Vertical / or   H + V     Horizontal Shaft Diameter ø  105 mm Roll diamter ø    Stroke = 390 mm Shaft length    Adj = 360 - 1100 mm Working speed M/Min.    1 - 16 M/Min Resistance moment Cm 3  Torq = 3000 Nm Cm3 Capacity IPN   IPE 160 x R = 1000 mm Capacity Tube walltickness x Ø114 x R = 300 mm Power   11 DIMENSIONS Length    1850 mm Width     1600 mm Height  &nbs ...

Machine type MIG/MAG welding system Make MERKLE Type CompactMIG 400 DW Connection voltage 3 x 400 volts Adjustment range 25 - 400 amperes Switch-on time 35% ED at 400 amperes 60% ED at 310 amperes 100% ED at 230 amperes Current setting 14 switching stages Cooling transformer due to built-in fan Cooling burner water-cooled Execution of mobile industrial plant with separate DV-case Wire feed 4-wheel gearbox DV 26 Fuse 16 Ampere Dimensions L x W x H 940 x 445 x 1,040 mm Weight 170 kg Special accessories display, automatic wire, VB cable 1.6 mtr. Age 12 months Condition workshop-tested, as new, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 504 W, 3 mtr. long 1 piece ground cable 4 mtr. long, 70 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 ...

Machine type MIG/MAG welding system Make MERKLE Type CompactMIG 400 K Connection voltage 3 x 400 volts Adjustment range 25 - 400 amperes Switch-on time 35% ED at 400 amperes 60% ED at 310 amperes 100% ED at 230 amperes Current setting 14 switching stages Cooling transformer due to built-in fan Cooling burner gas-cooled Execution of mobile industrial plant Wire feed 4-wheel gearbox DV 26 Fuse 16 Ampere Dimensions L x W x H 940 x 480 x 760 mm Weight 140 kg Special accessories display, automatic wire Age 12 months Condition workshop-tested, as new, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 307 G, 3 mtr. long 1 piece ground cable 4 mtr. long, 70 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 roll welding wire D-300 coil, 5 kg 1 can of non ...

CNC-Portal Cutting Machine Manufacturer: Sato Type: Satronik D5765 Built: 2016 CNC control: Satocontrol CNC 3010 Track width: 5,750 mm 6 x oxyfuel torche without a career without table without filter

ovenn 650 inner dimensions 1x1x2m t max 650 C PLC Auto door Schachtofen Haubenofen Rollenherdöfen Durchstoßöfen Härten Glühen Normalisieren Weichglühen Vergüten Anlassen Entspannen Durchschuböfen Hubbalkenöfen Hubherdöfen Trockenöfen Rollenherdöfen Drehherdöfen Kammeröfen Mehrkammeröfen Verfahrbare zirlguss Haubenöfen Herdwagenöfen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Haas Okuma Gildemei ...

Machine type MIG/MAG welding system Make MERKLE Type OptiMIG 351 DW Connection voltage 3 x 400 volts Setting range 25 - 350 amperes Switch-on time 60% ED at 350 amperes 100% ED at 300 amperes Current setting 28 switching stages Cooling transformer due to built-in fan Cooling burner water-cooled Execution of mobile industrial plant with separate DV-case Wire feed gearbox 4-wheel transmission DV 26 Fuse 32 Ampere Dimensions L x W x H 990 x 510 x 1.135 mm Weight 210 kg Special accessories Volt and Ampere digital display Automatic wire Age 12 months Condition workshop-tested, as new, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 4 mtr. long, 70 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 piece spare part box k ...

Table diameter: 3200 mm Turning diameter: 5100 mm Turning height: 2650 mm Motor power: 75 HP/kW Positions ATC: 16   Positions APC: 0   CNC Brand: Siemens CNC Model: Sinumerik System 8 Make CNC Dorries Type CTE 320 / 3400 CNC Siemens Sinumeriek Year 1981 - Ex Aerospace Dorries cte 320 Centre height (mm) Chuck 3200 mm Center distance (mm) Max swing 5100 mm Spindle bore Height 2650 mm Table load 60 Tons Toolchanger 16 Positions Speed 100 Rpm / 6000 feeds  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Dörries CNC Vert. boring mill single column with displaceable table - Make : Dörries - Germany - Typ : CTE 320 / 3400 - Age : 1981 – Ex. Aerospace ! - Serial.No : D 149 / 5079 - Chuck Ø : 3.200 - Max. turning Ø Pos. 2 : 5.100 - Max. turning height : 2.650 - Slide adjustment : 2.000 - Stroke Tool holder : 1.250 - Cross r ...

pressure:500 t passage width:1600 x 1300 mm stroke:1100 mm Table size:1600 x 1300 mm open height:1700 mm Press speed:25,2 - 9,4 mm/sec Approach Speed:300 mm/sec return speed:200 mm/min machine dimensions LxWxH:2800 x 1800 x 7200 mm Weight (approx.):55 t Description of the press frame The frame is designed as a frame construction with 2 operating sides. It consists of highly dimensioned braces, which are tightly and rigidly welded with upright steel ribs. The complete welding part is processed on precision machines. As a stiff box construction. The underside of the box is formed by a solid welded steel plate, which is prepared for the assembly of insulation and heating plates. The complete welding part is processed on precision machines. Integrated guide and cylinder connections in a power optimised design. Plunger Guide The plunger is guided diagonally through a prism guide, i.e. the ang ...

Machine type MIG/MAG welding system Make MERKLE Type OptiMIG 351 KW Connection voltage 3 x 400 volts Setting range 25 - 350 amperes Switch-on time 60% ED at 350 amperes 100% ED at 300 amperes Current setting 28 switching stages Cooling transformer due to built-in fan Cooling burner water-cooled Execution of mobile industrial plant Wire feed gearbox 4-wheel transmission DV 26 Fuse 32 Ampere Dimensions L x W x H 990 x 510 x 845 mm Weight 190 kg Special accessories Volt and Ampere digital display Automatic wire Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 504 W, 3 mtr. long 1 piece ground cable 4 mtr. long, 70 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 piece spare part box kpl. Equipped 1 piece use ...

Machine type MIG/MAG welding system Make MERKLE Type OptiMIG 451 DW Connection voltage 3 x 400 volts Adjustment range 25 - 450 amperes Switch-on time 40% ED at 450 amperes 60% ED at 420 amperes 100% ED at 340 amperes Current setting 42 switching stages Cooling transformer due to built-in fan Cooling burner water-cooled Execution of mobile industrial plant Wire feed gearbox 4-wheel transmission DV 26 Fuse 32 Ampere Dimensions L x W x H 990 x 510 x 1.135 mm Weight 220 kg Special accessories Automatic wire Volt and ampere digital display Age 12 months Condition workshop-tested, as new, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 4 mtr. long, 70 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 piece spare part b ...

Machine type MIG/MAG welding system Make MERKLE Type OptiMIG 451 KW Connection voltage 3 x 400 volts Adjustment range 25 - 450 amperes Switch-on time 40% ED at 450 amperes 60% ED at 420 amperes 100% ED at 340 amperes Current setting 42 switching stages Cooling transformer due to built-in fan Cooling burner water-cooled Execution of mobile industrial plant Wire feed gearbox 4-wheel transmission DV 26 Fuse 32 Ampere Dimensions L x W x H 990 x 510 x 845 mm Weight 200 kg Special accessories Volt and Ampere digital display Automatic wire Age 12 months Condition workshop-tested, as new, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 4 mtr. long, 70 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 piece spare part box ...

Two-shaft shredder KS 1000/2 INDIVIDUAL - ADAPTABLE - ON YOUR RIGHTS Product information The 2-wave shredder KS 1000/2 is a powerful shredder that has a completely mechanically machined, solid grinding chamber. It is composed of 4 parts which are completely plugged into each other and screwed together, this gives an enormous stability and is very maintenance-friendly. The machine is powered by 2 high-performance electric motors that drive hexwaves running against each other via high-quality and robust planetary gearboxes 2. The hexagonal shafts can be equipped with individually made cutting discs of different thicknesses. The grinding chamber of the KS 1000/2 is double protected by wear plates and wear rings and is therefore completely armoured against wear. specifications: -Cutting room: 1000×600 -Drive: 2x15kW -Speed per shaft: 16.5 rpm -Advantage: Constant torq ...

Machine Details Warehouse number 1105-03539 Machine type CNC lathe Mori SEIKI brand Type SL 15 MC Year of construction 1995 Control type CNC Control fanuc 16 T Storage location FRANCE Country of origin Japan Delivery time immediately Freight base from stock Price Technical details Turning diameter 420 mm Turning length 560 mm Control fanuc 16 T Vibration diameter 455 mm Rapid traverse in X and Z direction 18/24 m/min Travel x/z 220 / 520 mm Rod diameter 45 mm Spindle motor 11 / 7.5 kW Spindle speed 50 - 5000 rpm Spindle torque 143 Nm Spindle nose JIS A2-5 Revolver Stations 12 Tailstock pinole holder MK 4 Tailstock pinole stroke 80 mm Tailstock pinole diameter 75 mm Tailstock travel 450 mm Total power requirement 25 kW Information - CNC - Control MSG 516 fanuc 16 3 BAKE FOOD KITAGAWA DIA 165 - Coolant device SPAENEFOERDERER

VDI 40 for Okuma , angular driven tool holder ( radial ) , clutch Okuma stepped, without internal cooling Type: RGX1-40/251-25/1.2-80JA Warranty: 12 months TURRET TYPE VDI MACHINE MODEL ES L10 II M (DISC) MACHINE MANUFACTURER OKUMA TYPE OF TOOL HOLDER LIVE TOOLS PRODUCT TYPE ANGULAR SHANK SIZE 40 INTERNAL COOLING NO TOOL GRIP DIMENSION ER25 TOOL GRIP TYPE COLLET Transmission ratio 1:1 TORQUE [Nm] 50 Height [mm] 80 Suitable for the following machines Compatible machines OKUMA > ES L10 II M (DISC) > ALL TYPE > ALL TYPE OKUMA > ES L10 II M (DISC) > LIVE TOOLS > ANGULAR OKUMA > LB/LU 300 M (DISC) > ALL TYPE > ALL TYPE OKUMA > LB/LU 300 M (DISC) > LIVE TOOLS > ANGULAR OKUMA > LB/LU 25-M (DISC) > ALL TYPE > ALL TYPE OKUMA > LB/LU 25-M (DISC) > LIVE TOOLS > ANGULAR We sell exclusively to traders Prices are net plus the legal Vat

The Siemens three-phase asynchronous motor is unused, therefore as good as new! Name: Asynchronous Motor Manufacturer: Siemens Type: 1PH72282HF0101BB9-Z Year built: 2011 Hours of operation: 0 Std. Empty weight: weight 870 kg Construction form: V5 Dimensions: length: 1500 mm, width 600 mm, height 700 mm Speed: 1500 / 1750 / 2000 rpm Operating voltage: 340 /395 /450 V Type of protection: 55 IP Description: three-phase asynchronous motor/squirrel-cage motor Technical documentation: yes (PDF) Performance: 160 / 179 / 196 kW Frequency: 51 /59 /67 Hz Rated current: 350 / 342 /332 A. Torque: 1750 /2000 Nm Message: max. coolant temperature: 40°C, max. speed: 4500 rpm Price: on request

Machine Details Stock No. 1105-03273 Type of machine Machining Center - Vertical Make HURCO Type VMX 42 M 2008 Year of Manufacture Type of control CNC Storage location FRANCE Country of origin taiwan Delivery time immediately Freight basis ex work Technical details x-travel 1060 mm y-travel 610 mm z-travel 610 mm work surface 1200 X 610 mm engine output (30 min. ED) 15 kW Distance between table and spindle 150 - 760 mm Torque 600 Nm rpm 30 min ED 22 Control Ultimax 4 weight of the machine about 6 t Additional information ultimax 4 8000 rpm

Vertical Turning Machine Modified with SUPFINA superfinishing device as a polishing machine. Workspace Chuck diameter: 250 mm Plan transfer stroke X: 800 mm Longitudinal stroke Z: 300 mm Feed Rapid speed X: 100 m/min Rapid velocity Z: 45 m/min Spindle box Spindle head (flat flange): 170h5 mm Spindle diameter in the front bearing: 120 mm Spindle bore: 79 mm Main drive Power of the three-phase hauplan drive: 22 kW Torque ED 100%: 210 Nm Speed range: 20 ? 5000 rpm C-axis Speed range: 0-100 rpm Torque (holding torque brake): 240 Nm Point silence accuracy: < 0.02 degrees Tool carrier Number of tool stations: 12 Tool holder according to DIN 69880 Cylinder shaftdiameter: 40 mm Drive power (40% ED): 10.8 kW Torque: 28 Nm Speed, max.: 6000 rpm Hydraulics Content, complete: approx. 25 L Pressure max.: 80 bar Pressure for clamping device, max.: 70 bar Coolant device Content: approx. 25 L Pump pow ...

Machine type MIG/MAG welding system Make OERLIKON Type Citomag 506 W Connection voltage 3 x 400 volts Adjustment range 30 - 500 Ampere Switching time 60 % ED at 500 amps 100% ED at 420 amps Current setting infinitely variable Cooling transformer by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Wire feed gearbox gearboxed 4-roll gearbox Protection up to a maximum of 300 A = 32 A over 300 A = 63 A Dimensions L x W x H 1,050 x 630 x 1,050 mm Weight 237 kg Age approx. 20 years Condition workshop tested, good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 4 mtr. long, 70 sqm 1 piece pressure reducer argon with 2 pressure gauges 1 piece spare parts box kpl. Equipped 1 piece user manual  ...

Working area Swing over bed: 650 mm Swing over cross slides: ? 465 mm Max. turning diameter: ? 400 / ? 315 mm Cross travel (X): 267.5 mm Longitudinal travel (Z): 600 mm Rapid traverse (X / Z): 30 / 30 m/min Main Spindle Spindle nose: A2-8 Bar capacity: ? 80 mm Spindle diameter in the front bearing: 130 mm Chuck: 210 / 250 / 315 Drive power (40/100% ED): 25.5 / 17 kW Maximum torque (40/100% ED): 426 / 283 Nm Maximum speed: 4000 rpm Positioning accuracy Acc. to ISO 230-2 in X- / Z-axes (indirect measurement system): 5 / 10 ?m Acc. to ISO 230-2 for C-axis: 20 arcsec Turret Number of tool stations: 12 x VDI 40/6 x BT Of which driven tool stations: 12 Tool station diameter: 40 mm Max. power: 5.44 kW Max. torque (40 % DC): 20 Nm Max. speed: 4,000 rpm Tailstock Tailstock travel: 500 mm Life center interface: 5 MK Max. tailstock force: 8 kN Guidwa ...

ULMA Super Chik, year of manufacture 2002 • Extended infeed conveyors. • Centralized lubrication. • Sanitary clean out tray. • Gravity and motorized exit conveyors: in line, 90º, 180º, ... • Additional 1 meter sealing device. • Automatic image centering device for printed films. • Printed band attachment. • Transparent tray detection. • Sealer Cooler. • Others (Ask). A high performance wrapping machine, specially developed for the wrapping of trays in central processing facilities (meat, poultry, fish, vegetables, fruits) and high volume supermarkets. A large range of models for customer requirements. Its strength, reliability, ease of operation, and automatic size change, make it the most automatic size change, make it the most productive and versatile machine available, possibility to wrap with several kinds of film: PVC, polyethylene and poly ...

GE 1085 HP (809 kW) High-Torque, series wound, DC drilling motor Horizontal, drip-proof fully guarded, blower ventilated

The PRIMA POWER PLATINO 1530 laser was produced in 2012 by the Italian company Prima Power. Technical parameters: – machine time worked: 24800 hours – power: 2500.0 W – CNC control: Primach 20L – X travel: 3000.0 mm – Y travel: 1500.0 mm – working area: 3000 x 1500 mm – maximum sheet length: 3000.0 mm – maximum sheet width: 1500.0 mm – maximum sheet thickness: 15.0 mm – maximum load on the table: 250.0 kg – machine length x width x height: 12000.0 mm × 6000.0 mm × 3000.0 mm – machine weight: 12000.0 kg Rofin Sinar DC 025 CO2 laser specification – type: CO₂ – laser: Rofin Sinar DC 025 – power: 2,500 Watt – power stability: + -2% FS – wavelength: 10.6 µm – gas type: He 67.7%; CO2 4.1%; N2 28.2% – beam propagation factor M2: 250 microseconds, 70 used resolutions – positioning accuracy: + -150 radians – operating condi ...

Machine is not in working condition, and can be used for spare parts only. , Workspace Chuck diameter: 250 mm Plan transfer stroke X: 800 mm Longitudinal stroke Z: 300 mm Feed Rapid speed X: 100 m/min Rapid velocity Z: 45 m/min Spindle box Spindle head (flat flange): 170h5 mm Spindle diameter in the front bearing: 120 mm Spindle bore: 79 mm Main drive Power of the three-phase hauplan drive: 22 kW Torque ED 100%: 210 Nm Speed range: 20 ? 5000 rpm C-axis Speed range: 0-100 rpm Torque (holding torque brake): 240 Nm Point silence accuracy: < 0.02 degrees Tool carrier Number of tool stations: 12 Tool holder according to DIN 69880 Cylinder shaftdiameter: 40 mm Drive power (40% ED): 10.8 kW Torque: 28 Nm Speed, max.: 6000 rpm Hydraulics Content, complete: approx. 25 L Pressure max.: 80 bar Pressure for clamping device, max.: 70 bar Coolant device Content: approx. 25 L Pump power: 1.7 kW Flow ra ...

Longitudinal stroke X 11,000 mm Vertical stroke W 3,000 mm Vertical stroke Z 1,000 mm Transverse stroke Y 4,600 mm Work progress 3,000 mm/min Fast forwards 8,000/10,000 Maximum thrust on x-axes 30,000 N Maximum thrust on the Y 20,000 N axes Maximum thrust on Z 20,000 N Spindle engine power 71 kW Constant torque spindle speed range 0-58 g/min Spindle speed range at constant power 58-518 g/min Maximum spindle torque (intermittent service S6) 10,000 Nm Power voltage 400 Vac Power frequency 50 Hz Absorbed current 150 A Total installed power 125(170) kW

Maximum turnerable diameter 1200 mm Maximum permissible diameter 1250 mm Spindle engine power (S1/S6) 55 / 66 Kw Spindle maximum laps 1200 rpm ASA 15" Spindle Attachment Fast speeds 12 m/min X-axis stroke 750 mm Z-axis stroke 750 mm Rated engine torque 20 (X)-20 (Z) Nm Peak engine torque 80(X)-80(Z) Nm Nominal thrust force 1200(X) -120 (Z) N Screw pitch 10 (X) -10 (Z) mm Tools 24 Crown HIRT tool attachment Maximum weight per cell 15 kg Tool change cycle time 10 seconds Maximum weight on tool change ~ 250 Average tool weight ~ 10 Maximum milling tool diameter 150 mm Maximum tool length 350 mm Siemens Sinumerik Control

The CNC milling center HWACHEON VESTA 1050B 8K was manufactured in 2013. Technical parameters of the HWACHEON VESTA 1050B 8K milling center – CNC control: FANUC Series Oi-MD – table size: 1150×600 mm – X / Y / Z axis movement range: 1000/600/600 mm – maximum table load: 1000 kg – spindle speed: 8000 rpm – spindle power: 18.5 / 15 kW – spindle torque: 481/293 Nm – feed speed: 1-10000 mm / min – cone: BT-40 (BT-50) – number of tools: 24 – coolant tank capacity: 340 l – machine weight: 7200 kg – machining time: 14861 h Equipment of the HWACHEON VESTA 1050B 8K machining center – cooling through the spindle – chip conveyor – probes – cone BT-40

Vertical Turning Machine Modified with SUPFINA superfinishing device as a polishing machine. Workspace Chuck diameter: 250 mm Plan transfer stroke X: 800 mm Longitudinal stroke Z: 300 mm Feed Rapid speed X: 100 m/min Rapid velocity Z: 45 m/min Spindle box Spindle head (flat flange): 170h5 mm Spindle diameter in the front bearing: 120 mm Spindle bore: 79 mm Main drive Power of the three-phase hauplan drive: 22 kW Torque ED 100%: 210 Nm Speed range: 20 ? 5000 rpm C-axis Speed range: 0-100 rpm Torque (holding torque brake): 240 Nm Point silence accuracy: < 0.02 degrees Tool carrier Number of tool stations: 12 Tool holder according to DIN 69880 Cylinder shaftdiameter: 40 mm Drive power (40% ED): 10.8 kW Torque: 28 Nm Speed, max.: 6000 rpm Hydraulics Content, complete: approx. 25 L Pressure max.: 80 bar Pressure for clamping device, max.: 70 bar Coolant device Content: approx. 25 L Pump powe ...

Working area Swing over bed: 650 mm Swing over cross slides: ? 465 mm Max. turning diameter: ? 400 / ? 315 mm Cross travel (X): 267.5 mm Longitudinal travel (Z): 600 mm Rapid traverse (X / Z): 30 / 30 m/min Main Spindle Spindle nose: A2-8 Bar capacity: ? 80 mm Spindle diameter in the front bearing: 130 mm Chuck: 210 / 250 / 315 Drive power (40/100% ED): 25.5 / 17 kW Maximum torque (40/100% ED): 426 / 283 Nm Maximum speed: 4000 rpm Positioning accuracy Acc. to ISO 230-2 in X- / Z-axes (indirect measurement system): 5 / 10 ?m Acc. to ISO 230-2 for C-axis: 20 arcsec Turret Number of tool stations: 12 x VDI 40/6 x BT Of which driven tool stations: 12 Tool station diameter: 40 mm Max. power: 5.44 kW Max. torque (40 % DC): 20 Nm Max. speed: 4,000 rpm Tailstock Tailstock travel: 500 mm Life center interface: 5 MK Max. tailstock force: 8 kN Guidwa ...

x-travel: 750 mm y-travel: 560 mm z-travel: 600 mm Control: HEIDENHAIN iTNC 530 total power requirement: 70 kW weight of the machine ca.: 11.000 kg dimensions of the machine ca.: m D E C K E L M A H O (Germany) Vertical CNC Machining Centre with high speed linear drives in 3 Axis and in double column design for high precision work Model DMC 75 V LINEAR Year 2005 _______________________________________________________ Working range: Longitudinal stroke X Axis 750 mm Vertical stroke Z Axis 600 mm Cross stroke Y Axis 560 mm Table clamping size 950 x 650 mm Max. Table load 1.000 kg Max. height of workpiece 600 mm Tool holder Cone HSK 63 Spindle (KESSLER) speeds 18,000 rpm Torque, max. 86/1 ...

2-axis universal turning machine with SUPFINA superfinishing attachement Working area swing diameter over guide way protection: 500 mm -- 19,68 in clamping chuck diameter: 170 (210) mm -- 6,69 (8,26) in transverse stroke (X axis): 190 mm -- 7,48 in longitudinal stroke (Z axis): 525 mm -- 20,66 in Feed drive rapid feed, X/Z axes: 30/30 m/min -- 1181,1/1181,1 in/min Y axis 22.5 m/min -- 885.8 in/min Main stock spindle nose size: 140 h5 mm spindle diameter in front bearing: 100 mm 3,93 in spindle bore diameter: 73 mm 2,87 in Main drive AC main drive power (100%-40% ED) 13 - 14 kW 17,42 ? 18,76 HP Torque (100%-40% ED) 171,5 - 192 Nm 126,49 - 141,61 ft.Lb Speed range 20 ? 6000 rpm Electrical connection (5 conductor system, L1, L2, L3, N, PE) connected load, total approx. 30 kVA voltage: 400 V frequency: 50 Hz protection (slow-blow) acc. to VDE 0100: 63 A perm ...

2-axis universal turning machine with SUPFINA superfinishing attachement Working area swing diameter over guide way protection: 500 mm -- 19,68 in clamping chuck diameter: 170 (210) mm -- 6,69 (8,26) in transverse stroke (X axis): 190 mm -- 7,48 in longitudinal stroke (Z axis): 525 mm -- 20,66 in Feed drive rapid feed, X/Z axes: 30/30 m/min -- 1181,1/1181,1 in/min Y axis 22.5 m/min -- 885.8 in/min Main stock spindle nose size: 140 h5 mm spindle diameter in front bearing: 100 mm 3,93 in spindle bore diameter: 73 mm 2,87 in Main drive AC main drive power (100%-40% ED) 13 - 14 kW 17,42 ? 18,76 HP Torque (100%-40% ED) 171,5 - 192 Nm 126,49 - 141,61 ft.Lb Speed range 20 ? 6000 rpm Electrical connection (5 conductor system, L1, L2, L3, N, PE) connected load, total approx. 30 kVA voltage: 400 V frequency: 50 Hz protection (slow-blow) acc. to VDE 0100: 63 A perm ...

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 3,6/3,5 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Basis: Basis: Kellenberger Kel-Varia UR175-1000 Schleifkopf UR mit T1-T2-T3 Grundausstattung: -T1 500mm Schleifscheibendurchmesser -T2 400mm Schleifscheibendurchmesser -B-Achse hochauflösend -Marposs Messeinrichtung zur Werkzeugvermessung -Werkzeugvermessung -Aktive Längspositionierung -GAP an T1 berührungslos -Reitstock mit Handrückzug -Werkstückspindelstock MK5 mit Kurzkegelaufmahme DIN 55026 -Innenschleifeinrichtung riemengetrieben Optionen gegen Aufpreis: - neuer Werkstückspinde ...

x-travel: 2600 mm y-travel: 1600 mm z-travel: 1700 mm Control: Fanuc 16 MB total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 42 x 18 m The system requires a space of approx. 42 x 18 m It is designed for fully automatic operation in 3 shifts. Components with tolerances of

Working area Swing over bed: 650 mm Swing over cross slides: ? 465 mm Max. turning diameter: ? 400 / ? 315 mm Cross travel (X): 267.5 mm Longitudinal travel (Z): 600 mm Rapid traverse (X / Z): 30 / 30 m/min Main Spindle Spindle nose: A2-8 Bar capacity: ? 80 mm Spindle diameter in the front bearing: 130 mm Chuck: 210 / 250 / 315 Drive power (40/100% ED): 25.5 / 17 kW Maximum torque (40/100% ED): 426 / 283 Nm Maximum speed: 4000 rpm Positioning accuracy Acc. to ISO 230-2 in X- / Z-axes (indirect measurement system): 5 / 10 ?m Acc. to ISO 230-2 for C-axis: 20 arcsec Turret Number of tool stations: 12 x VDI 40/6 x BT Of which driven tool stations: 12 Tool station diameter: 40 mm Max. power: 5.44 kW Max. torque (40 % DC): 20 Nm Max. speed: 4,000 rpm Tailstock Tailstock travel: 500 mm Life center interface: 5 MK Max. tailstock force: 8 kN Guidwa ...

Torque: 12 Nm volt: 144 V ampere: 11 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.