We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,424 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Broaching tool, broaching needle, special tool, grooving tool, keyseating machine, keyway broaching machine, keyway broaching machine, keyway broaching tool, broaching needle -Manufacturer: SWZ, broach push broach -Type: A 12 P9x2.3-36/126 -Item no.: 45 0276 114 1672 000 -Width: 12mm -Number: 3x broach available -Price per piece -Total dimensions: 1245/12/H24 mm -Weight: 2.5 kg/pc.
used
Broaching tool, broaching needle, special tool, grooving tool, keyseating machine, keyway broaching machine, keyway broaching machine, keyway broaching tool, broaching needle -Manufacturer: SWZ, broach push broach -Type: B 6 J9x1.8 RL 24-72mm -Item no.: 45 0014 134 1260 000 -Width: 6mm -Number: 3x broach available -Price per piece -Total dimensions: 900/6/H13 mm -Weight: 0.5 kg/pc.
used
Bending tool, die, upper knife, upper tool -Tool: for press brake, 4 pieces -Tool: 90° -Dimensions: 98 x 27 mm -Dimensions: see the drawing in the photos -Total length: 1977mm -Lengths: 2x 1015/ 1x 545 / 1x 417 mm -Transport dimension: 1015/200/H55 mm -Weight: 42.6 kg
used
Bending tool, die, upper knife, upper tool -Tool: for press brake, 11 pieces -Tool: 60° -Dimensions: 95 x 36 mm -Dimensions: see the drawing in the photos -Total length: 7780mm -Lengths: 8x 835 / 2x 600 / 1x 500 mm -Transport dimension: 835/400/324 mm -Weight: 182 kg
used
Bending tool, die, upper knife, upper tool, straight tool -Manufacturer: UKB, 35° punch/upper tool UKB system Amada type 11.104 3-piece -Radius: R 1.5mm -Height: 86mm -Load capacity: 700 kN/m max. -Dimensions: see the drawing in the photos -Total length: 2505 mm / (3 x 835 mm) -Weight: 34kg
used
2 column punching tool, separating tool, punching tool, punch, punching die, punching punch, column frame -Punching tool: 2 columns, with 4-digit code -Recording: bolt Ø 38 mm -Stamping stamp: see photos -Dimensions: 450/265 / H305 mm -Weight: 94 kg
used
2 column punching tool, separating tool, punching tool, punch, punching die, punching punch, column frame -Punching tool: 2 pillars -Recording: bolt Ø 40 mm -Stamping stamp: see photos -Dimensions: 690/290 / H290 mm -Weight: 61 kg
used
2 pillars punching tool, separating tool, punching tool, punch, punching die, punching punch, -Punching tool: 2 pillars -Recording: Ø mm bolt -Stamping stamp: see photos -Dimensions: 330/285 / H300 mm -Weight: 59 kg
used
Bending tool, die, lower knife, lower tool, prism tool, reversible prism, 1-part die block for die bending machine -Tool: for press brake, 12 pieces -Prisms: 25 ° x 10 mm -Drawing: in the photos -Lengths: see parts list in the photos -Dimensions total: 30/79/2917 mm -Weight: 47 kg
used
Bending tool, die, lower knife, lower tool, prism tool, reversible prism, 1-part die block for die bending machine -Tool: for press brake, 13 pieces -Lower rail: length 3050 mm -Prisms: 33° x 17 mm / 81° x 20 mm -Lengths: see drawing in the photos -Dimensions: 3050/100 / H120 mm / 3050/100 / H100 mm -Weight: 204 kg
used
2 column punching tool, separating tool, punching tool, punch, punching die, punching punch -Punching tool: 2 pillars -Mount: Ø 40 mm bolt -Punch: approx. 4.3 mm -Profile width: approx. 14 mm -Dimensions: 262/170/H280 mm -Weight: 32 kg
used
2 pillars punching tool, separating tool, punching tool, punch, punching die, punching punch -Punching tool: 2 pillars -Punch: 5 pieces 20 x 2 mm, distance 20 mm -Price: per piece -Number: 3 pieces available -Dimensions: 280/140/H160 mm -Weight: 18 kg
used
for milling holders, spindle head, tool mounting holder, modular tool pocket, tool holder set -Manufacturer: Susta, tool holder -Set: 6x SK 40 holders with base frame -Dimensions: 590/115/H120 mm -Weight: 3.7 kg
used
Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Dimensions: 10 x 88 mm -Length: 2000 mm -with: storage box -Weight: 13.2 kg
used
Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Prisms: 90° x 75 mm -Dimensions: see drawing in the photos -Dimensions: 2500/270/H175 mm -Weight: 188 kg
used
Separating tool, punching tool, punch, punching die, punching punch, gill forming tool -Punching tool for: holding matrices -Bore diameter: 50 mm -Dimensions: 335/220/H180 mm -Weight: 42 kg
used
Tool changer chain, chain magazine, tool changing system, tool magazine -Spare part comes: from a machining center BJM type ALBZ-145 -Tool change system -CUT changer -RIG changer: RIG 06-12-P003 VX VCP -Drive motors: MGM -Dimensions: 1400/950/H830 mm -Weight: 380 kg
used
Tool changer chain, chain magazine, tool changing system, tool magazine -Spare part comes: from a machining center BJM type ALBZ-145 -Tool changing system: CTM42 DO 12P3 400 -CUT changer: CUT42-V-90-60-D VX -RIG changer: RIG 06-12-P003 VX VCP IN DA -Drive motors: MGM -Dimensions: 730/700/H450 mm -Weight: 160 kg
used
Bending tool, die, lower knife, lower tool, prism tool -Tool for: press brake -Prisms: 90° 12 mm -Drawing: in the photos -Length: 4200 mm (2 x 2100 mm) -Dimension: 20 x 75 mm -Weight: 44 kg
used
Bending tool, die, lower knife, lower tool, prism tool -Tool for: press brake -Groove: W/D 9 x 12, 5 x 8, 17 x 20 mm -Length: 3 x 835 mm, 1 x 272 mm -Width/height: 60 mm -Drawing: with the pictures -Weight: 67.5 kg
used
Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Dimensions: 20 x 70 mm -Length: 3020 mm -Weight: 22 kg
used
4-column punching tool, parting tool, punching tool, punch, punching die, punching punch -4 pillars: punching tool -Dimensions: 395/195/H240 mm -Weight: 54 kg
used
2 pillars punching tool, separating tool, punching tool, punch, punching die, punching punch -2 pillars: punching tool -Dimensions: 170/100/H130 mm -Weight: 5.3 kg
used
2 pillars punching tool, separating tool, punching tool, punch, punching die, punching punch -2 column punching tool -Recording: Ø 32 mm bolt -Dimensions: 270/290/H325 mm -Weight: 39 kg
used
2 column punching tool, separating tool, punching tool, punch, punching die, punching punch, -2 pillars: punching tool -Admission: M20 fine thread -Dimensions: 270/350/H335 mm -Weight: 132 kg
used
2 column punching tool, separating tool, punching tool, punch, punching die, punching punch, -2 pillars: punching tool -Recording: Ø 40 mm bolt -Dimensions: 300/360/H375 mm -Weight: 130 kg
used
4-column punching tool, cutting tool, punching tool, punch, punching die, punching punch, -Punching tool with: bending function -Admission imensions: 300/205/H445 mm -Weight: 100 kg
used
4-column punching tool, cutting tool, punching tool, punch, punching die, punching punch, -Punching tool with: bending function -Take bolt: 40 mm -Dimensions: 255/205/H210 mm -Weight: 25 kg
used
4-column punching tool, cutting tool, punching tool, punch, punching die, punching punch, -4 pillars: punching tool -Take bolt: 40 mm -Dimensions: 340/300/H235 mm -Weight: 72 kg
used
Bending tool, die, lower knife, lower tool, prism tool -Tool for: press brake -Prisms: R14.5 mm -Square: 101 x 71 mm -Total length: 552 mm -Weight: 26 kg
used
Separating tool, punching tool, punch, punching die, punching punch, gill forming tool -Punching tool for: holding matrices -Bore diameter: 97 mm -Dimensions: 220/335/H115 mm -Weight: 32 kg
used
Separating tool, punching tool, punch, punching die, punching punch, gill forming tool -Punching tool for: holding matrices -Bore diameter: 70 mm -Dimensions: 220/317/H115 mm -Weight: 32 kg
used
Die holder, cutting tool, punching tool, punch, punching die, punching punch, gill forming tool -Punching tool: for holding matrices -Bore diameter: 50 mm -Dimensions: 200/120/H80 mm -Weight: 5.6 kg
used
Die holder, cutting tool, punching tool, punch, punching die, punching punch, gill forming tool -Punching tool: die -Punching dimensions: 15 x 25 mm square -Dimensions: 115/115/H115 mm -Weight: 3.4 kg
used
Separating tool, punching tool, punch, punching die, punching punch, gill forming tool -Punching tool: for holding matrices -Bore diameter: 100 mm -Dimensions: 325/335/H115 mm -Weight: 50 kg
used
Bending tool, die, upper knife, upper tool, straight tool -Handover in the current condition as seen -partially damaged -Tool: for press brake -Dimensions: 35 x 154 mm -Length: 2653mm -Weight: 79.5kg
used
Bending tool, die, upper knife, upper tool, upper beam -Tool: comes from a Fasti type 211-32-2.5 folding machine -Transfer in current condition as seen -partially damaged -Pointed tool -Dimensions: 75 x 15 mm -Length: 3041 mm -Weight: 23 kg
used
Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Prism groove: 7/10 mm -Square: 66 x 26 mm -Length: 2505 mm -Weight: 24 kg
used
Tool changer chain, chain magazine, tool changing system, tool magazine -Manufacturer: Tool changer from CNC machining center MAHO -for: max. 24 shots -Recording: SK -Dimensions: 1200/410/H480 mm -Town weight: 106 kg
used
Tool changer chain, chain magazine, tool changing system, tool magazine -Manufacturer: Mikron, tool changer from CNC machining center Mikron UME 600 -for: max. 22 shots -Intake: SK40 -Dimensions: 1200/1150/H860 mm -Transport weight: 294 kg
used
Bending tool, die, bottom knife, bottom tool, prism tool -Manufacturer: UKB, tool: for press brake, 85° 6-piece -Prisms: dimensions see photo type name -Total length: 3810 mm / 4 x 835mm / 1 x 240/230 mm each -Width/Height: 60mm -Transport dimensions: 835/300/H60 mm -Weight: 71 kg
used
Bending tool, die, upper knife, upper tool, straight tool -Manufacturer: UKB, tool: for press brake, 26 pieces -Type: 11,600 R=0.8/35° H=90 -Dimensions: see drawing in the photos -Dimension: 26 x 120 mm -Total length: 4761 mm / see photo parts list -Weight: 93 kg
used
Separating tool, punching tool, punch, punching die, punching die, gill forming tool -Manufacturer: Peddinghaus, punching tool for: holding matrices -Bore diameter: 70 mm -Dimensions: 220/320/H115 mm -Weight: 32 kg
used
Separating tool, punching tool, punch, punching die, punching die, gill forming tool -Manufacturer: Peddinghaus, punching tool scraper -Holes: Ø 13 mm -Threaded hole: M15 -Dimensions: 150/100/55 mm -Weight: 1.8 kg
used
Press brake tool holder for bending tool, die, upper knife, upper tool -Tool holder: pressure plate intermediate holder for: press brake -Holder: hole spacing 100 mm -Dimensions: see photos -Quantity: 15 holders available -Price: per piece/minimum purchase 5 items. -Dimensions: 150/15/H50 mm -Weight: 0.6 kg/pc.
used
Press brake tool holder for bending tool, die, upper knife, upper tool -Tool holder: intermediate holder for: press brake -Holder: hole spacing 100 mm -Dimensions: see photos -Quantity: 14 holders available -Price per piece -Dimensions: 170/60/H130 mm -Weight: 4.1 kg/pc.
used
Punching tool with Linar built-in punching brackets ABS-SCHWABE type 100/160 11 punching brackets, punching unit Year of construction approx. 1990 Projection: 160 mm Punching capacity: 0.3 to 5 mm Material thickness Hole diameter: 2 to 7 mm Installation height: 203 mm (only the punching bracket individually with punching tool) Built-in is a round hole tool ø 5 mm Punching bracket spacing: 195 mm - the tool unit was mounted on a hydraulic press brakeDimensions of punching bracket base plate L x W x H: 2500 x 345 x 37.5 mm Dimensions of punching bracket pressure plate L x W x H: 2500 x 173 x 20 mm Overall dimensionsL x W x H: 2500 x 345 x 300 Weight: 400 kg good condition; used
used
Bending tool holder for bending tool, die, upper knife, upper tool -Tool holder: Intermediate holder for press brake with 2nd pressure plate -Holder: hole spacing 100 mm -Dimensions: see photos -Quantity: 15 holders available -Price per piece -Dimensions: 175/60/H130 mm -Weight: 5.6 kg/pc.
used
chamfer lenght: 3050 - 4020 mm 4 pieces of unused upper tools: tool No 1 Length: 3700 mm, dimensions see sketch, price = 940,- tool No 2 length: 4020 mm, dimensions see sketch, price = 880,- tool No 3 length: 3055 mm, dimensions see sketch, price = 750,- tool No 4 length: 3050 mm, dimensions see sketch, price = 750,- Prices excl. VAT Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Description: Approx. 28 pieces Of which 2 driven tool holders Manufacturer: SAUTER One horizontal and one vertical Various other types of VDI tool holders (see pictures) Important note: the tool holders are delivered without the mounted machine tool. These are not included in the scope of sale and delivery Approx. Onsite Dimension. (l x w x h): 600 x 450 x 120 mm, weight approx.: 60 kg