tool used for sale

Driven tool for Mazak Integrex Item description see nameplate. Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, available. Errors in the description and intermediate sale is reserved. Shipping with freight forwarding.

Tool cabinet for press brake Good for WILA / TRUMPF tools or Type B L / W / H: 1180 mm x W 850 mm / H 1200mm, 350kg -ausziehbare drawers, allows the double-sided access to the tools -beliebige height adjustment of shelves -robust steel construction, powder coated -Lateral fork guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) -The cabinet can be dismantled - Number of drawers: 4 pieces - Dimensions of drawer: - Total height 1200mm / 850mm total width / total depth 1180mm - Dimensions of the compartments in a drawer: - Fachhhoehe adjusted to 210mm (is varriabel) - Trade Height total usable ohnen shelves 990mm - Trade width 130mm available - Trade depth usable 1100mm - Number of shelves: 4 pieces / completely continuous; "ready for operation"

Tool cabinet for bending tools / exhibition object suitable for AMADA/PROMECAM or type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg - for AMADA/Promecam tools -extendable drawers, allows double-sided access to the tools -any adjustment of the inserting roofs -robust steel construction, powder-coated -side fork rails for transport by forklift (cavity under the cabinet) -the drawers run on roller slide rails ( serve as additional stabilization) -the cabinet can be disassembled - Number of drawers: 4 squares - Mass of a drawer : - Total height 1200mm / Total width 850mm / Total depth 1050mm - Mass of the faeces in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Fachhoehe total usable without intermediate boeden 990mm - Fachbreite usable 130mm - Technical depth usable 980mm - Number of intermediate boeden: 3 stueck

Opening tool unit/geared motor for coconut fiber ropes. Thus, twisted coconut fiber ropes can be rotated up from 3 to 4 cm thick. 220 volt connection, can also be converted to 380V. Gedwistete coconut fiber stricke can be processed into loose fibers. Top runs the knitting pure, is turned up and fall down the loose fibers out. Fully functional.

Post driven tools from a Traub CNC lathe VDI 40 As well as some measuring geraete for Traub Rest according to photos Special price

Tool cabinet for press brake Good for AMADA / PROMECAM or Type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allowing access from both sides of the tools -any height adjustment of shelves -sturdy steel construction Fork-lateral guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) , the cabinet can be broken - Number of drawers: 4 pieces - Dimensions of a drawer: - 1200mm Overall height / Overall width 850mm / 1050mm Overall depth - Dimensions of the compartments in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Total compartment height 990mm shelves available ohnen - Usable shelf width 130mm - Usable shelf depth 980mm - Number of shelves: 3 piece

Praezision clamping tool Kombi plug-on pins BestNo. 1052-018 2 stub SK60x40x27 Unused and ovp 1 x as good condition Only against bid! Special price

6 x 50/105, right, Ø13 mm 6 x 50/105, left, Ø13 mm 8 x 60/115, right, Ø13 mm 10 x 70/125, left, Ø13 mm

Tool cabinet for press brake Good for AMADA / PROMECAM or Type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allowing access from both sides of the tools -any height adjustment of shelves -sturdy steel construction Fork-lateral guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) , the cabinet can be broken - Number of drawers: 4 pieces - Dimensions of a drawer: - 1200mm Overall height / Overall width 850mm / 1050mm Overall depth - Dimensions of the compartments in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Total compartment height 990mm shelves available ohnen - Usable shelf width 130mm - Usable shelf depth 980mm - Number of shelves: 3 piece

Tool to CNC milling center Steep cone-cone SK 40 Vsadrq with tightening bolt Tool according to the pictures flat rate EUR 6980.00 Built in 2003 In good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Tool cabinet for bending tools suitable for AMADA/PROMECAM or type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allows the two-sided access to the tools -any adjustment of the inserting -robust steel construction, powder-coated -side fork guide rails for transport by means of forklifts (cavity under the cabinet) -the drawers run on roller slide rails (serve as additional stabilization) Cabinet can be disassembled - Number of drawers: 4 squares - Mass of a drawer : - Total height 1200mm / Total width 850mm / Total depth 1050mm - Mass of the faeces in a drawer: compartment hhoehe set to 210mm (is varriabel) - Fachhoehe total usable without intermediate boeden 990mm - Tray width usable 130mm - Depth usable 980mm - Number of intermediate boeden: 3 stueck

50 pcs tool cassettes for inserts Fabr. Widax-Heinlein

Electric tool changer RASTER Premat EWD20

Standard performance connection to 380 V, 50 Hz, 3-phase. Equipment: 2 grinding spindles zubehoer ample tool weight:600 kg Flue requirements:1.5x2.6 m -cooling agent device with electric pump

Tool trolleys, tool holders Dimensions; width x length x height (approx. 100 x 80 x 100 cm) 52 mounts

; ready for operation

Technical data: -maximum working length 1250 mm -Stand round 1050 mm -Max pressing force 80 t -Stroke 250 mm -Stand RADIUS 300 mm -Max height betw. Table - press bar 560 mm -Lifting speeds -Backward speed idle max 100 mm / sec. -Forward speed 100 mm / sec. -Backward press speed max. 12 mm / sec. -Total power 15 kW -Space requirement approx. B 1750 x H 3400 X 2000 mm -Weight approx. 8500 kg -with: - CNC - control CYBELEC DNC 7400 PSGY -controlled X - axis back gauge 5-1000 mm -Pneum. Z - axis in three stages. height-adjustable -manually movable and foldable stop fingers -controlled pneumatic die shift - hydr. Tool clamping -Manual crowning - 2 piece support arms -Pointed tool shared H 320 x L 1000 mm -Foot tool H 320 mm x L 1000 mm - universal matrix L 1000 mm

Technical data: -Pressure capacity 2000 kN -Max working width 3100 mm -Stand round 3200 mm -Stand RADIUS 300 mm -Max mounted height 965 mm -Hub, or insertion depth Steplessly adjustable 0-400 mm -Plunger speed forward + reverse per 100 mm / sec -Operating speed in 9 steps selectable 1-10 mm / sec -Drive 400 V / 26.5 kW - space requirement approx. B H 4400 x 3500 X 2200 mm -Weight approx. 18500 kg -with: - CNC - control CYBELEC ModEva 15s BJ. 2007 -Back gauge with 4 controlled pneum. on the side and height-adjustable stop fingers -controlled bending AIDS in the velocity range -Hydr. -Pneum.. Clamp of the upper tool + substation witness -mot. Crowning / hydro cushion in the table -laterally movable support arms -E - foot switch -split pointed tool R 1-100 t / m, split die

Technical data: -Length approx. 2500 mm -Width approx. 1000 mm -Height approx. 800 mm -Top plate thickness approx. 90 mm - 4 pieces t grooves in the table surface length 2500 mm -Centre distance of the T-slot table surface each 215 mm -T - slot width approx. 40 / 70 mm -T - groove depth approx. 60 mm -Space requirement L 2700 x T 1200 x H 800 mm - weight approx. 3700 kg

! KNIFE RETURNS! Directly from the manufacturer, the original from the patent holder of Apfel GmbH. Also available in other sizes! Dimensions: W=1040 mm, D=1050 mm, H=2140 mm two-tone powder-coated Housing : gentian blue structure (RAL 5010) Extracts : grey-white structure (RAL 9002) Payload per extension 900 Kg Weight: approx. 517 kg Fully assembled as a set included 6 Tool Holders WKH 210 6 Tool Holders WKH 211 5 Tool Holders WKH 212 5 Tool Holders WKH 213 4 Tool Holders WKH 214 4 Tool Holders WKH 215 Dimensions: 1,040 w x 2,140 h x 1,050 t Curb weight: 517 kg Structure powder-coated in Gentian blue RAL 5010 (body) and Off-white RAL 9002 (excerpts)

Technical data: -Get well plate surface -Length approx. 2000 mm -Width approx. 1000 mm -Height approx. 1600 mm -Top plate thickness approx. 95 mm -Top plate with internal ribbing - 4 piece t grooves on the surface of the table length 2000 mm -Centre distance of the T-slot table top 230 mm each -Table side L 2000 mm with 12 holes M27 -T - slot width approx. 40 / 67 mm -T - groove depth approx. 35 / 60 mm -Space requirement L 2200 x T 1200 x H 1600 mm - weight approx. 4980 kg

CNC machining tool Morari Swivel unit with recording ISO-30 maximum speed 15000 rpm with test certificate Built in 2000 Excellent condition, ready for use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

ZM punch grinder

Tool holder VDI 30 longitudinal holder Interface size square 20x20 3.3020DSS left overhead Cantilever length (LPR) 100.00 mm Functional length (LF) 0.00 mm Operating height (HF) 20.00 mm Functional width (WF) 36.00 mm Clamping length, max. (LSCX) 100.00 mm Direction Tool Holder (HAND) L Number of holders, workpiece side (CCONWS) 1 Product Categories Static Tools and Adapters Product type square holder Shaft size VDI30 Square Interface Size 20x20 Convertible No Rotatable main and sub-spindle No Tool orientation 0° Price without VAT Link to the product on the manufacturer's website: ttps://ews-tools.de/de-DE/product/ews-3-3020dss-laengsaufnahme-stahlho ehe-20-din-69-880-form-c4-links-ueberkopf-/69496 Condition: New

6 x 50/105, right, Ø13 mm 17.40 eur 6 x 50/105, left, Ø13 mm 17.40 eur 8 x 60/115, right, Ø13 mm 17.40 eur 10 x 70/125, left, Ø13 mm 18.00 eur

Jig Ingersoll IG750 Bj1992; Travel 500 x 700 x 350 with 6-fold electrode changer for Erowa ITS copper + graphite electrodes.

BUTT END REDUCER consist of cone roller (8 m) with log turner, Cross conveyor 4 strings, butt end reducer (motor 50 kW) steper to feed...

1 box with various tool stops turning

Convolute (excerpt) from different tools - see picture

. Size C with cylindrical bore 40 / 50 mm .

HITACHI WIRE EDM MACHINE MODEL MS 250 H-CUT 8Q X-AXIS STROKE: 1030 MM Y-AXIS STROKE: 810 MM Z-AXIS STROKE: 530 MM

Tool holder VDI 30 longitudinal holder Interface size square 25x25 2.3025G300 right overhead Cantilever length (LPR) 70.00 mm Functional length (LF) 0.00 mm Working height (HF) 25.00 mm Functional width (WF) 17.00 mm Clamping length, max. (LSCX) 70.00 mm Direction Tool Holder (HAND) R Number of holders, workpiece side (CCONWS) 1 Product Categories Static Tools and Adapters Product type square holder Shaft size VDI30 Interface size square 25x25 Convertible No Rotatable main and sub-spindle No Tool orientation 0° Price without VAT Link to the product on the manufacturer's website: ttps://ews-tools.de/de-DE/product/ews-2-3025g300-laengsaufnahme-stahlh oehe-25-/28007 Condition: New

Manufacturer: Lid Type: DE10C Year of construction: 1997 Following the technical data: Table dimensions L x b 390 x 280 mm traverse path: X - axis: 250 mm, Y - axis: 180 mm, Z - axis: 250 mm Table - Quill distance min./max.: 240 / 490 mm Table load: Max: 250 kg

Technical data: Fixed angular table: Fixed angular table clamping area: 800 x 400 mm Max table load: 200 kg Working spindle: Tool holder horizontally and vertically: ISO 40 Power of the main drive motor / 100% ED: 2.2 kW Vertical milling head: Speed range, tiered: (12) 50 - 2000 rpm Drill pinole, stroke: 100 mm Swivel range: +/- 90° Travel: X-axis automatic/man.: 385/400 mm Y-axis automatic/man.: 185/200 mm Z-axis automatic/man.: 365/380 mm Feeds: Feed range: 0-650 mm/min Number of feeds: infinitely adjustable Rapid response: 1000 mm/min Characteristics: - Machine accuracy according to DIN 8615 - 3-axis digital displays FAGOR® Innova (option) - Spindle run max. 0.005 mm, incl. test protocol according to DIN 8615 (rolling bearing SKF®/NSK®) - Vertical milling head can be swivelled out for horizontal milling (without d ...

This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. The price is net plus 19% VAT. Manufacturer: Premus Precitool Type: Preciset 420 Measuring range X: 420 mm Measuring range Z: 420 mm Pressure: 6-8 bar Frequency: 50/60 Hz Power: 600 VA Voltage: 100-120 V~ / 200-240 V~ Weight: ~120 kg Accessories: Data clips incl. coding section zidCode Scanner All information is made to the best of our knowledge, errors excepted. The sale is subject to exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of the Seller's duties or to any injury to life, limb and health. Further legal Information can be found on the website of Witzenmann GmbH under the keywords "Imprint", "Terms and Conditions" and "Data Protection".

Table surface: 300 x 1300 mm Table movement x: 950 mm Table movement y: 220 mm Table movement z: 400 mm Spindle intake: MK 5 Spindle speeds: 25-1200 rpm Prests lengthwise & across: 7.5-635 mm/min Presens vertical: 3-250 mm/min Electr. Connection: 380 V, 7.5 kW Space requirement: 1670 x 1500 x 1750 mm Weight: 2600 kg

Machine number: 20932 Operating voltage: 3 x 400 VAC Frequency: 50/60 Hz. Rated Current: 46A 63A Control voltage: 200-240 VAC Power: 28 kW Control: Tool holder: Grinding head: Grinding spindle: Spindle can be swivelled by motor Drive power: 7.5 kW Speed: 0 – 9000 rpm Lens mount: Disc diameter: Max. number of slices: Travel: X: 380 mm Y: 280 mm Z: 280 mm Feed: X and Y axis: 20000 mm/min Z-axis: 10000 mm/min Swivel axes: Designation: C-axis Swivel angle: 340° Feed: max. 66°/s Axis: A-axis: Rotation endless Feed: max. 167°/s Incl. oil cooling and cooling system from the manufacturer ARO Incl. various matching machine accessories such as tool holders, coolant lines and other clamping devices

Table clamping area: 560 x 240 mm x-way: 300 mm y-way: 275 mm z-way: 200 mm Spindle holder: ISO 40 Spindle speeds: 40 - 2000 rpm Operating voltage: 380 V Total power requirement: 1.5 kW Space requirement: 1200 x 1100 x 1700 mm Weight: approx. 750 kg

2 pcs. molds with 1-1 cavity, automat with hot runnel control, PP material molds sizes both: 300x245x213 mm machine size min. 25 T

1 cavity from PP material mold sizes: 383x450x384 mm machine size min. 100 T

Used injection molding tools for the manufacture of plastic slippers. Offer total 43 pcs. refers to two cavities tooling and accessories. From small children (23) to men (45) in size, it is suitable for the manufacture of slippers of various types and colors. For sale total 12,900 Euro

Travel x 350 mm y 250 mm z 220 mm Water bath machine Automatic wire threading Glass scales x / y incl. box for large coils incl. cooler incl. functional guarantee

Alu window profiles Punching tool for end hole ventilation 4 stations

Key data: 500 , 350 , 300

Travel X 500 / Y 350 / Z 300, Water bath machine, automatic wire threading, incl. 20 KG option incl. cooler

Zoller tool pre-setr with change adapter for index GE / GB / ER / machines as well as Gildemeister GM / Schuette lathes partly universally applicable (VDI etc) - with Heidenhein measuring device - various base holders - Measuring table Etc.

Wire EDM machine SODICK A 600 manufactured in 1997. Technical parameters of the SODICK A 600 EDM machine: - table travel (X axis): 600 mm - table travel (Y axis): 400 mm - Z axis travel: 270 mm - maximum dimensions of the processed part (width x depth x height): 800 x 550 x 260 mm - maximum weight of the workpiece: 900 - auxiliary table travel (U axis x V axis): 70 x 70 mm - wire diameter: 0.1 ~ 0.3 mm - maximum wire speed: 250 mm / sec. - wire tension: 0.2 ~ 2.8 kgf - cutting inclination at an angle: + -15 degrees per 100 mm of thickness - height from the floor to the surface of the working table: 1000 mm - machine tool dimensions (width x depth x height): 2188 x 2645 x 2100 mm - machine tool weight: 3700 kg

Tool adjuster, adjustment and measuring instrument used Manufacturer E. Zoller Type: V420D2-00172 EC Type: V420D2-00294 VENTURION 500 Built: 2003 Dimensions: approx. 1600 x 1000 x 2000 mm

Rapid Original TRM 350 Quick Release Holder type TRM350 Indexing 0.005 With 7 alternating necks 4 Pcs 201/350 34mm 1 St 202/350 Prima 32mm 2 Pcs 216/350 Diameter 50mm