140,760 used machines on RESALE, but how to find them? Machine Search
x-travel: 500 mm y-travel: 200 mm z-travel: 400 mm table surface area: 700 x 300 mm tool taper: SK 40 - S20 feed: 8 - 400 mm/ min rapid traverse: in X und Z 1200 mm / min turning speeds: 40 - 2000 U/min total power requirement: 2,2 kW weight of the machine ca.: 1400 kg dimensions of the machine ca.: 1500 x 1200 x 1600 mm Includes 2-axis digital display Heidenhain The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A cassette set of bending tools for FASTI MAK
Tool Milling Machine Cover FP4MK 2203 Travel XYZ: 500-400-400 mm Spindle mount: ISO 40 Spindle speeds: 50-2500 Universal Rotary Table 2038 incl. Angle Counter VRZ560 Active Digital Display 3 Axes Heidenhain TNC113 Hydraulic drawbar for DIN 2080 Quill with 90 mm stroke Coolant system Incl. vice Weight approx. 1700 kg Year of construction approx. 1992
Consisting of: socket wrench, ratchet, screwdriver. Auction-ID: A1-41281-339
Key data: 600 mm, 400 mm, 350 mm
For sale Sodick CNC wire EDM machine type ALC 600G. Used CNC wire EDM machine with minimal soot traces. Type ALC600G Premium • With linear motors in X, Y, U and V directions • With Smart Pulse (SP) CNC generator • High-speed wire feeder unit • Smart Linear • Automatic wire feeder in 9 seconds • Triple filtration system •Jumbo 20kg wire roll feeder is standard • Smart control with 19" TFT multi touch screen Technical data machine: Travel X-Y axis: 600 x 400 mm Travel U-V axis: 150 x 150 mm Travel Z-axis: 350 mm Max. workpiece dimensions: 800 x 570 x 310 mm (in a water bath) 800 x 570 x 340 mm (coaxial flushing) Working tank dimensions: 1050 x 710 mm Max. workpiece weight: 1000 kg Distance between floor and top of the table: 995 mm Controlled axes: 5 (X, Y, Z, U, V) Max. positioning speed m/min: 2.0 Wire diameter ø: 0.1–0.3 mm (optionally 0 ...
Batch of milling and sawing tools, Auction-ID: A1-41281-83
Spindle-to-table distance min./max.: 81mm/481mm, counter support spindle center distance: 195mm, spindle head swivel: 360°, milling spindle diameter: 70mm, spindle adjustment: 100mm, headstock adjustment: 300mm, table dimensions X/Y: 480mm/820mm, travel X/Y/Z: 500mm/200mm/400mm, max. workpiece length: 400mm, spindle speed: 1600rpm, feed X/Y: 500mm/min, feed Z: 250mm/min, spindle head swivel: +/-30°, machine dimensions X/Y/Z: approx. 1600mm/2550mm/1700mm, weight: approx. 2300kg. The machine was electrically tested at the end of 2025 and a defect of the emergency stop switch was discovered. Documentation available. On-site inspection is possible.
: mit Zubehör serial number: 71309 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: mm y-travel: mm z-travel: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offer 25434 Technical data: - Working range of the axes - X (longitudinal) / Y (transverse) / Z (vertical) 750 / 380 / 380 mm - Table dimensions 1300 x 300 mm - Tool holder ISO 40 - Autom. Quill feed - Quill stroke - Wind cutting device 140 mm - Distance vertical spindle – table 20 - 540 mm - Working spindle speeds 80 - 3800 rpm - Feed X – Y and Z axis - Rapid traverse 1400 mm/min - Swivelling vertical milling head 45° left + right - Swivel upper arm 360 ° - Coolant device - Drive 400 V / 5.0 kW - Space requirement approx. W 2000 x H 2500 x D 2100 mm - Weight approx. 2200 kg - Separate workbench / tool cabinet with various accessories
This M-PULSE 2k6e was manufactured in 2020. It features a modular controlling system, high-quality European components, and is designed for optimal integration into production lines or as a standalone solution. Safety is prioritized with triple redundant voltage measurement and internal safety discharge mechanisms. Energy capacity is 6060 Ws with a maximum voltage of 2000V. Contact us for more information about this machine.
This DEPO HF milling machine was made in the year 2012 and has 7 axis. The Stable 7-axis machine is specially developed for the manufacture of tools, molds and matrices.
Of which 1 with content Auction-ID: A1-50663-1471
Consisting of: socket wrench, ratchet, screwdriver. Auction-ID: A1-41281-356
This Emmegi VEGAMATIC was manufactured in 2008. It is an automatic cutting centre for aluminium profiles, featuring a feeder travel of 7395 mm and feed speed up to 60 m/min. The blade rotation angle ranges from -45° to +45°, with a standard blade diameter of 500 mm. Ideal for precise large-scale cutting tasks. Contact us for more information about this machine.
This Other FSW head was manufactured in 2023. Designed to integrate seamlessly with milling machines, it features friction welding technology. Ideal for enhancing your milling setup with advanced welding capabilities. Contact us for more information.
This COMCO CTR201-2 was manufactured in 2022. It features 1,264 machine hours and comes with a variety of options including a magnifier MB4320-1, abrasive hose MB1233-25, and replacement HEPA filter assembly CTR280-1. Additional parts include conductive nozzles and a 100 Micron Wheat Starch supply. Contact us for more information.
: 600 mm : 500 mm : 400 mm : 1000x500 mm : 1200x250 mm : 40-3200 U/min : DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 600 mm : 500 mm : 400 mm : 1000x500 mm : 1200x250 mm : 40-3200 U/min : DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Batch of milling and sawing tools, Auction-ID: A1-41281-78
This OTEC DF10 was manufactured in 2016. It features a stainless steel process container and jog mode for easy workpiece changes. Includes additional storage for workpieces and holders, accommodating up to 10 holders. Equipped with water cooling DF-7 and a cooling compressor, its suitable for ambient temperatures between 10-40°C. Ideal for efficient media mixing and tool handling. Reach out for more information.
x-travel: 300 mm y-travel: 300 mm z-travel: 400 mm CNC-control: DIALOG 11 spindle taper ISO: 40 spindle turning speed range: 31 - 5.000 U/min table-size: 620 x 390 mm table load: 250 kg power capacity: 5,5 kW feeds -stepless-: 2 - 6.000 mm/min quill stroke: 80 mm coolant: voltage: 380 V total power requirement: 11,0 kVA weight of the machine ca.: 1,65 t dimensions of the machine ca.: 1,85 x 1,90 x 1,80 m electric cabinet: 1,35 x 0,70 x 1,70 m - Serial-No.: 2836-0175 - control: DIALOG 11 - electrical hand wheel - horizontal milling spindle - coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Consisting of: clamp set, tape measure, hand saw Auction-ID: A1-41281-509
Consisting of: file & grater set, tool pouch, C-clamps Auction-ID: A1-41281-372
This EXPERT cut Expert ecocam 2 was manufactured in 2024. It features a high positioning speed of 90 m/min and can handle cutting heights up to 100 mm. The machine operates on a PC-based NC software and supports various tool options including electric oscillating knives and driven circular knives. Ideal for cutting leather, textiles, and foams. For more information about this machine, please reach out to us.
x-travel: 620 mm y-travel: 420 mm z-travel: 400 mm Control: Heidenhain TNC 124 turning speed range - spindle: 50 - 4.000 U/min transmission ratio: 2 drive capacity - spindle motor: 6 kW tension force: 10 kN swivellable: manuell +/-45 ° max. tool diameter: 125 mm max. tool weight: 6 kg table surface area: 400 x 800 mm T-slots: 5x14x80 max. table load: 400 kg feed speeds: X/Y: 0 - 6.000 mm/min feed speeds: Z: 0 - 4.000 mm/min rapid traverse: X/Y: 6 m/min rapid traverse: Z: 4 m/min total power requirement: 11 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 2,9 x 3,5 x 2,0 m Includes: Heidenhain TNC124 point-to-point control Electrical documentation available Coolant system 2 work lights Machine vise Various tool holders Various SK40 tools Enclosure with 2 sliding doors available, pictures to follow The data for this ad was created with ModulMWS - the software solution of ...
Consisting of: socket wrench, ratchet, screwdriver. Auction-ID: A1-41281-439
This MEMMERT UN110 was manufactured in 2021. It features a working temperature range from 20 to 300°C, with a setting accuracy up to 0.5°C for precise control. The unit has a volume of 108 liters, ideal for various laboratory applications. Consider the opportunity to buy this MEMMERT UN110. Contact us for more information.
Manufacturer: DMG Model: ECO 210 Year of Manufacture: 2007 Electrical Data: Voltage: 230 V Frequency: 50 Hz Power Consumption: Max. 650 VA Find more here - .ucymachines/ Contact us at - sales@ucymachines
Batch of milling and sawing tools, Auction-ID: A1-41281-91
Consisting of: socket wrench, ratchet, screwdriver. Auction-ID: A1-41281-494
This AMT AHDR 500/1600 was manufactured in 2018. It features a coil diameter of 1600 mm and a spreading range of 250–650 mm, with a double-swivel reel powered by dual 0.75 kW reel drives. With a total weight of 1200 kg and a through height of 1200 mm, its in excellent, like-new condition with zero operating hours. Contact us for more information about this machine.
: 600 mm : 500 mm : 400 mm : 1000x500 mm : 1200x250 mm : 40-3200 U/min : DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This CAMFIL Quantum Series 2 was manufactured in 2020. It features a robust steel construction, designed for continuous industrial use with a motor power of 4 kW and airflow of approximately 2,000 m³/h. Ideal for metalworking processes, it includes an energy-saving fan and a maintenance-friendly design with easily accessible filter elements. Consider the opportunity to buy this CAMFIL Quantum Series 2. Contact us for more information about this machine.
range L-W-H: 960 x 460 x 860 mm weight: 75 kg : 7 St. Tool Trolley – 8 Drawers – Partially Equipped (6 Drawers) High-quality workshop trolley with 8 ball-bearing drawers, 6 of which are fully equipped with tools. The trolley is lockable and equipped with 4 sturdy casters (2 swivel, 2 lockable) for comfortable and safe operation. A robust polypropylene worktop completes the set. Features & Quality: – Ball-bearing, extendable drawers – Central locking mechanism / lockable – 4 casters (2 swivel, 2 lockable) – Tools made of chrome vanadium steel – Tools neatly stored in foam inserts Drawer 1 Ratchet and socket sets 1/4, 3/8, and 1/2, including ratchets, universal joints, extensions, and short and long sockets (approx. 4–30 mm). Drawer 2 Extensive ratchet accessories: Torx (with/without bore), Allen, slotted, Phillips (PH/PZ), spline, Ribe, and five-point – for 1/4, 3/8, ...
This EUBAMA S6 rotary transfer was manufactured in 2006. It features a robust base frame, hydraulic fittings, a Stöber servo motor with planetary gearbox, and a milling unit with NC feed. Ideal for precision, it also includes a face turning head and a length control system with a pneumatic cylinder and laser. Contact us for more information about this machine.
Key data: 750 mm, 650 mm, 60 A
Refurbished OPS Ingersoll Gantry 500 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition. ...
This WIPOTEC SC 30 was manufactured in 2023. It features a high-speed operation with a capacity of up to 240 pieces per minute and a scan width of 320 mm. The system includes stainless steel construction, intuitive touchscreen controls, and an industrial high-performance X-ray unit for precise foreign object detection. Ideal for efficient and accurate sorting operations. Contact us for more information about this machine.
length: 560 mm width: 730 mm height: 1150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Batch of milling and sawing tools, Auction-ID: A1-41281-89
Batch of milling and sawing tools, Auction-ID: A1-41281-85
maximum number of results exceeded
please refine your search
10 € 
