tool used for sale

Clamping devices, clamping jaws, deep clamping jaws, clamping supports, clamping tools, step clamps, low clamps, clamping irons, step blocks, clamping screws, T-slot screws, slotted screws, T-slot nuts -Clamping tool: Clamping bolt with T-slot nut -Bolt: Ø 27.5 mm -T-nut: 35/54 mm -Dimensions: Ø 100 x 700 mm -Weight: 5.5 kg

Die holder, notching tool, punching tool, punch, punch die, punch stamp -Punch tool: Ø 23.5 mm -Hole: Ø 122 mm -Matrix: Mounting diameter 70 mm -Overall dimensions: Ø 122 x 172 mm -Weight: 3.8 kg

max. grinding diameter: - mm grinding length: - mm workpiece length: - mm total power requirement: 1,5 kW weight of the machine ca.: 1 t dimensions of the machine ca.: 1,3 x 1,1 x 2 m Movie: https://www.youtube.com/watch?v=rWhWg4H_tos No. 5042 Universal tool and steel grinding machine SIMON VSR 3 2-fold digital display + optics Drive: 1.1 kW 2-station pendulum table grinding / measuring Cross slide 1 with Z1 + Y 1 Cross slide 2, rotatable, with Z2 + Y2 Height-adjustable grinding headstock Space requirement approx. 1.3 x 1.1 x 2 m Weight approx. 500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 290 mm y-travel: 170 mm z-travel: 310 mm table surface area: 600 x 210 mm spindle taper: SK 40 spindle turning speed range: 50 - 2600 U/min feeds: 9 - 450 mm/min quill stroke: 70 mm total power requirement: 5,5 kW weight of the machine ca.: 720 kg - machine out of teaching shop - Accessories: solid table, vertical head with quill retraction, DRO on 3 axis HEIDENHAIN, various tool fixtures, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Revolving Center MK - 5 with changeble points

Digital Travel paths X/Y/Z: 400 x 200 x 400 mm Table size 700 x 330 mm Tool holder ISO 40 Vise, hydraulic Refurbished in 2019

Key data: 450 mm, 320 mm, 162 mm

For sale Charmilles wire EDM machine type Robofil 4020.1. The machine is in very good condition. Still to be seen under power. Lots of accessories!

x-travel: 320 mm y-travel: 240 mm z-travel: 300 mm total power requirement: 3 kW weight of the machine ca.: 1 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

HSK 100 267 pieces tool holders from Haimer, Mapal, Hoffmann and Nikken including scrap chucks, Weldon holders, slip-on milling mandrels and collet chuck for use

Grooving tool, special tool, grooving tool, grooving machine, grooving machine, grooving tool -Special tool for grooving blind holes -Guided tour -grooving tool -Weight: 80 kg

max. grinding diameter: / mm grinding length: / mm workpiece length: / mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tool holder Weldon BT40 865 Manufacturer : Unknown Type : BT 40 Rod diameter : 8 mm Insert height : 65 mm Pieces : 8

Pressing tool, sheet metal former, forming tool, straightening tool -Pressing tool: Mounting: Ø 40 mm -Material: 1.2379 X153CrMoV12 cold work steel -Dimensions: 116/83/H340 mm -Weight: 15.6 kg

Pressing tool, sheet metal former, forming tool -Pressing tool: Edge tool -Angle: 90° -Length: 155 mm -Hole: Ø 40 mm -Dimensions: 155/155/H285 mm -Weight: 17.8 kg

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet, 2 doors, solid construction -Width: 800 mm -Depth: 630 mm -Height: 1790 mm -Shelves: See photos for layout/height -Weight: 100 kg

x-travel: 600 mm y-travel: 400 mm z-travel: 500 mm total power requirement: 6 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tool holder Weldon BT40 8160 Manufacturer : Unknown Type : BT 40 Rod diameter : 8 mm Insert height : 160 mm Pieces : 8

Tool changer chain, chain magazine, tool changing system, tool magazine -Manufacturer: Mikron, tool changer from CNC machining center Mikron VC500D -for: max. 16 recordings -Recording: SK40 -Individual components: see photos -Transport dimensions: Ø 780 x 540 mm -Weight: 56 kg

Tool holder, milling chuck, collet chuck, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, collet sleeves -Milling tool holders: SK40 13 pieces -Type: various designs, see photos -Price/Fee: complete -Transport dimensions: 400/400/H80 mm -Total weight: 24.5 kg

Tool holder Weldon BT40 12100 Manufacturer : Unknown Type : BT 40 Rod diameter : 12 mm Insert height : 100 mm Pieces : 9

Tool holder Weldon BT40 1663/65 Manufacturer : Unknown Type : BT 40 Rod diameter : 16 mm Insert height : 63/65 mm Pieces : 17

Tool holder Weldon BT40 1463/65 Manufacturer : Unknown Type : BT 40 Rod diameter : 14 mm Insert height : 63/65 mm Pieces : 6

Tool holder, milling holder, milling tool, adapter, intermediate sleeve, reducing sleeve -Milling attachments: Adapter, intermediate sleeve, reducing sleeve -Type: SK50-SK40-70 -Recording: SK50 -Holder tool: SK40 -Dimensions: Ø 98 x 180 mm -Weight: 3.6 kg

Tool holder Weldon BT40 14100 Manufacturer : Unknown Type : BT 40 Rod diameter : 14 mm Insert height : 100 mm Pieces : 1

Key data: 900 mm, 720 mm, 1160 mm

Drawer tool cabinet -Tiroclass 8 drawers height 95 mm Dimensions (L x W x H): 900 x 720 x 1160 mm Weight: approx 100 kg

Key data: 910 mm, 720 mm, 1110 mm

Drawer cabinet PAROLAI 11 drawers: 3 drawers height 40 mm 6 drawers height 60 mm 1 drawers height 150 mm 1 drawers height 90 mm Dimensions (L x W x H): 910 x 720 x 1110 mm Weight: approx 150 KG

Tool holder, milling holder, milling tool, adapter, intermediate sleeve, reducing sleeve -Milling attachments: Adapter, intermediate sleeve, reducing sleeve -Recording: SK50 -Recording tool: MK4 -Dimensions: Ø 98 x 195 mm -Weight: 2.9 kg

measuring range X-axis: 330 mm measuring range Y-axis: 400 mm spindle taper: SK 40/50 dimensions of the machine ca.: 1080 x 660 x 1080 mmxmmxmm weight: 175 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tool holder Weldon BT40 20100 Manufacturer : Unknown Type : BT 40 Rod diameter : 20 mm Insert height : 100 mm Pieces : 11

Clamping devices, clamping jaws, deep clamping jaws, clamping supports, clamping tools, step clamps, low clamps, clamping irons, cranked clamping irons -Manufacturer: AMF, Clamping tool, cranked clamping iron, 2 pieces -Type: 18x160 -Dimensions: see photos -Price/Fee: complete -Dimensions each: 163/50/H170 mm -Weight: 1.8 kg

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet, solid construction with 8 drawers -Width: 420 mm -Depth: 625 mm -Height: 1350 mm -Drawers: See photos for layout/height -Door: lockable, without key -Weight: 74 kg

Tool holder Weldon BT40 2090 Manufacturer : Unknown Type : BT 40 Rod diameter : 20 mm Insert height : 90 mm Pieces : 1

Tool holder Weldon BT40 2063/65 Manufacturer : Unknown Type : BT 40 Rod diameter : 20 mm Insert height :63/65 mm Piece :011

x-travel: 350 mm y-travel: 150 mm z-travel: 340 mm table surface area: 600 x 210 mm spindle taper: SK 40 spindle turning speed range: 40 - 2000 U/min feeds: 5 - 500 mm/min rapid traverse: 1,2 m/min total power requirement: 1,9 kW weight of the machine ca.: 0,7 t - machine out of teaching shop - Accessories: solid table, vertical head with quill retraction, DRO on 3 axis HEIDENHAIN, various tool fixtures, various collets, original DECKEL tool cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Top slide, top slide, dovetail guide, tool slide, cross table, support slide, support beam, tool clamp, tool holder, tool mount, centering clamp -Tool clamp: Centering clamp, tool holder -Hole: Ø 58 mm -Dimensions: see photos -Dimensions: Ø 125 x 125 mm -Weight: 5.7 kg

Tool holder, milling chuck, collet chuck, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, collet sleeves -Milling tool holders: SK40 16 pieces -Type: various designs, see photos -Price/Fee: complete -Transport dimensions: 400/300/H150 mm -Total weight: 37.7 kg

x-axis: 550 mm y-axis: 350 mm z-axis: 400 mm U-axis: 550 mm V-axis: 350 mm volume: 1200 L inclination: +/-30°/400 mm dimensions: 1200x700x400 mm weight: 1500 kg wire dia.: 0,10-0,33 mm Bobbin Weight max.: 25 kg total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tool holder SK40 × ER16 × 100 Manufacturer: Gühring /Heimer Type: ER16 Country of manufacture: Germany Weight: 1.08 kg Collet: ER16 Shaft length: 100 mm Condition: used Price plus VAT Pieces : 206

x-travel: 450 mm y-travel: 300 mm z-travel: 350 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 3-axes digital read out horizontal and vertical milling spindle quill Technische Daten / technical details: Längsweg X / X-travel longitudinal 450 mm Querweg Y / Y-travel cross 300 mm Senkrechtweg Z / Z-travel vertical 350 mm Tischgröße / table size 800x400 mm Spindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 50-2500 UpM /rpm Vorschubbereich / feed range 8-400 mm/min. Antriebsleistung / power capacity 3,2 kW Gewicht der Maschine / weight 1500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Quick-change tool holder, tool holder head, quick-change tool holder, quick-change boring bar holder, quick-change boring bar holder, quick-change turning tool holder, tool holder -Quick-change tool holder: Quick-change turning tool holder -Recording dimensions: see photos -Tool holder: MK4 -Dimensions: 115/70/H100 mm -Weight: 1.5 kg

Offer 24338 Drawer cabinet with front door Specifications: - 1 lockable front door, 1 key available - 2 pull-out wheel-bearing drawers - 2 pull-out pull-out shelves / platforms - Load capacity of the drawers + shelves each approx. 100 kg - Pull-out of drawers + shelves 80% each - Platform dimensions approx. W 430 x D 610 x H 270 mm - Drawer dimensions W 450 x D 610 x H 50 mm - Front door in front of the pull-out shelves / platforms - Space requirement approx. W 580 x H 880 x D 700 mm - Weight approx. 80 kg

Tool holder Weldon VDI 80 50100 Pieces: 1 60120 pieces: 6 Manufacturer: EWS Type: VDI 80 Country of origin: Germany Price without VAT Piece:

Tool holder Weldon VDI 60 50100 pieces: 5 1090 pieces: 2 4087 pieces: 2 24100 Pieces:1 3090 pieces: 10 2570 pieces: 1 32100 Pieces:1 Manufacturer: EWS Type: VDI 60 Price without VAT Country of origin: Germany

Tool holder Weldon VDI 50 3296 Pieces: 1 25160 pcs: 1 12170 Pieces: 1 40130 Pieces: 1 Manufacturer: EWS Type: VDI 50 Price without VAT Country of origin: Germany

2 x die-sinking EDM machines ZK Genius 700 BJ 1010 and 2019

Universal tool milling machine DECKEL FP 1 With 3 axes active digital display Heidenhain TNC 123 Year of Make: 1994 Travel: X 300 Y 160 Z 340 Speed range: 40 – 2000 rpm With the following accessories: Rigid angle table 600 mm x 250 mm clamping surface Sliding vertical milling head Extendable drill quill Stepless feed via potentiometer 1 pc. machine vise 1 pc. counter holder with counter bearing 1 pc. milling mandrel long 0 22 mm , 0 16 mm , 0 27 mm Various tool holders S 22 x 2 Bellows Z axis 1 chip protection Machine Light Automatic central lubrication pump Coolant Setup Operating instructions THE MACHINE IS IN TOP CONDITION! THE MACHINE COMES FROM A TRAINING WORKSHOP!

Tool holder Weldon VDI 40 10×80 Pieces: 12 3075 pieces: 2 4190 pieces: 3 4080 Pieces:2 3273 Pieces: 2 1375 Pieces: 12 1875 Pieces: 2 1668 pieces: 4 40120 pieces: 5 3095 pieces: 3 2475 pieces: 2 28/2775 Pieces: 2 1980 pieces: 10 3280 pieces: 5 667 pieces: 10 25150 pieces: 4 1865 pieces: 4 2580 pieces: 1 896 pieces: 1 Manufacturer: EWS Price without VAT Country of origin: Germany Condition: new

Horizontal universal balancing machine manufactured in 2004. This SCHENCK HM 70U BU features a maximum workpiece weight of 50,000 kg and a maximum workpiece length of 15,000 mm. It includes a control unit with CAB 920 software and a total power requirement of 75 kW. If you are looking to get high-quality balancing capabilities, consider the SCHENCK HM 70U BU machine we have for sale. Contact us for further details.

Separating tool, punching tool, punch, punch die, punch stamp, stripper -Manufacturer: Mubea, scraper 4 pieces -Size: 10/15/30/40 mm -Dimensions: see photos -Submission/Price: complete -Transport dimensions: 150/110/H60 mm -Weight: 6.1 kg

Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punch die, punching die -Punch tool: Angle notching tool, notching unit -Dimensions: see photos -Dimensions: 150/130/H80 mm -Weight: 4.4 kg