tool used for sale

Description: Various KOMET tool holders, some with ABS connection, including tightening bolts (41 STK) and various other tool holders, including storage and transport trolleys Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,300 mm, weight approx.: 200 kg

Description: Measuring range X-axis 300 mm Measuring range Y-axis 400 mm Table size 450 mm Tool diameter ISO 40 mm Magnification -x 150/20 Total power requirement 1.5 kW Machine with rotary unit for ISO 40 and adapter for collet holder - Pneumatic slide and tool clamping - Evaluation PC with screen and printer - Heidenhain standards - Endless fine adjustment Approx. Onsite Dimension. (l x w x h): 1800x1000xx1800 mm, weight approx.: 500 kg

Description: serial number: 53183 control: PHILIPS ,432 working hours: approx. 54064 hrs.  , travels: X-axis: 500 mm Y-axis: 400 mm Z-axis: 350 mm quill stroke: 50 mm feed ,rate: 1 - 4000 mm/min. turning speed range rpm: 20 – 5000 rpm rapid traverse: X-axis: 6m/min. Y-axis: 5 m/min. Z-axis: 6 m/min table dimensions: 350 x 660 mm tool taper: ISO40/DIN 69871 total power requirement: 10 kW milling table swivable: table rotation on B axis - table tilt by -30° to +30°  , attention: main drive non functional! z-motion: 350 mm, Read off operating hours: 54,064 h, x-motion: 500 mm, y-motion: 400 mm, control: PHILIPS 432, table surface area l x w : 350 x 660 mm, tool taper: ISO40/DIN 69871, turning speed range: 20 – 5000 rpm, feed range: 1 - 4000 mm/min, rapid motion: 5 - 6 m/min, weight approx.: 2,100 kg, Approx. Onsite Dimension. (l x w x h ...

measuring range X-axis:150-300 mm measuring range Y-axis: mm Table dimensions: mm measurement range Z =:450 mm tool diameter: mm tool taper: SK compressed air: bar dimensions: m machine weight ab.: kg clamping surface upper angle:

measuring range X-axis:150-300 mm measuring range Y-axis: mm Table dimensions: mm measurement range Z =:450 mm tool diameter: mm tool taper: SK compressed air: bar dimensions: m machine weight ab.: kg clamping surface upper angle: Mounted on 1 cabinet, equipped with 2 monitors, with keyboard, 1 control computer, 1 operating data printer

Number of axes: 5, x-axis: 400mm, y-axis: 270mm, z-axis: 250mm, A-axis: 360°, speed: 8000/min, control: Siemens Sinumerik 840D, tool holder HSK 50, max. spindle power: 12kW, connected load: 25kVA, length: 2680mm, width: 2400mm, height: 2800mm, weight: 7.5t, operating hours: 78,285h, with extraction system, extinguishing system, tool changer, automation, double gripper, software and documentation, without coolant system, an on-site inspection is possible.

universal tool sanding machine manufacturer fa Kellenberger (Strausak) the machine is geometrical and also funktionmig in a very good state. Spitzenh?he: 125 mms top width: 680 mms L?ngsbewegung: 500 mms Arbeitsfl?che of the table: 1030 x 214 mms Q?rzustellung: 280 mms mm H?henverstellung Schleifkopf:300 wheel area Schleiftisch: + 90 °/-45 ° wheel area Schleifkopf: 350 ° Horizontally wheel area Schleifkopf: 360 ° Vertically Schleifspindel 4 speeds: 2250-3000-4500-6000 revos Schleifscheibendurchme?er: 250 mms Antriebsleistung:Schleifsp .: 1.5 kW Sony 2-axes digital display 0,001 mms

univ. Tool sanding machine p. 1 with Fraesstichelschleifvorrichtung as good as new + drill special admission + Fraeslageraufnahme + instep tongs + Schleifscheiben - Abrichtvorrichtungshaube with diamonds engine power: 0.37 kW 1,450 revos 50 hertz

Tool cabinet for bending tools pull-out drawers, allows the two-sided access to the tools -any adjustment of the inserting roofs -robust steel construction, powder-coated, in any colors of the RAL pallet -side fork guide rails for transport by means of forklifts (cavity under the cabinet) -the drawers run on roller slide rails (serve as additional stabilization) . number of drawers: 4 squares - Mass of a drawer : - total height 1200mm / total width 850mm / total depth 1050mm - mass of the faeces set in a drawer: compartment heahe on 210mm (is varriabel) technical height can be used in total without intermediate boeden 990mm compartment width usable 130mm depth usable 980mm - number of intermediate boeden: 3 stubs ; ready for use

Tool cabinet for bending tools Suitable for WILA/TRUMPF Tools or type B L / W / H: 1180 mm x W 850 mm / H 1200mm, 350kg -extendable drawers, allows the two-sided access to the tools -arbitrary adjustment of the inserting roofs -robust steel construction, powder-coated -side fork guide rails for transport by means of forklifts (cavity under the cabinet) run drawers Roller slide rails (serve as additional stabilization) - the cabinet can be disassembled - number of drawers: 4 sets - Mass of a drawer : - total height 1200mm / total width 850mm / total depth 1180mm - Mass of the Fa echer in a drawer: compartment hoehe set to 210mm (is varriabel) technical height total usable without intermediate boeden 990mm - specialist width usable 130mm depth usable 1100mm - Number of intermediate boeden: 4 Stueck / completely continuous; new ready for use

- Manufacturer: VEB Watch Combination Ruhla / Germany - Model/Type: FUW 315/III - electric connection: 3 x 380V 50Hz 27.2A - electrical power consumption: 7.8 kW travel distance in X-axis approx. 500 mm travel in Y-axis approx. 520 mm travel distance in Z-axis approx. 440 mm working table Clamping area 315 x 1000 mm table load 150 kg tool holder 2 spindles: ISO 40 - Speed 2 spindles: 35-1800 rpm continuous adjustment Horizontal spindle path: 280mm - Vertical spindle path: 80mm ; ready for use

Driven tool for Mazak Integrex Item description see nameplate. Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, available. Errors in the description and intermediate sale is reserved. Shipping with freight forwarding.

Driven tool for Mazak Integrex Item description see nameplate. Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, available. Errors in the description and intermediate sale is reserved. Shipping with freight forwarding.

Driven tool for Mazak Integrex Item description see nameplate. Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, available. Errors in the description and intermediate sale is reserved. Shipping with freight forwarding.

Driven tool for Mazak Integrex Item description see nameplate. Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, available. Errors in the description and intermediate sale is reserved. Shipping with freight forwarding.

Tool cabinet for bending tools / exhibition object suitable for AMADA/PROMECAM or type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg - for AMADA/Promecam tools -extendable drawers, allows double-sided access to the tools -any adjustment of the inserting roofs -robust steel construction, powder-coated -side fork rails for transport by forklift (cavity under the cabinet) -the drawers run on roller slide rails ( serve as additional stabilization) -the cabinet can be disassembled - Number of drawers: 4 squares - Mass of a drawer : - Total height 1200mm / Total width 850mm / Total depth 1050mm - Mass of the faeces in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Fachhoehe total usable without intermediate boeden 990mm - Fachbreite usable 130mm - Technical depth usable 980mm - Number of intermediate boeden: 3 stueck

Tool cabinet for press brake Good for AMADA / PROMECAM or Type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allowing access from both sides of the tools -any height adjustment of shelves -sturdy steel construction Fork-lateral guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) , the cabinet can be broken - Number of drawers: 4 pieces - Dimensions of a drawer: - 1200mm Overall height / Overall width 850mm / 1050mm Overall depth - Dimensions of the compartments in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Total compartment height 990mm shelves available ohnen - Usable shelf width 130mm - Usable shelf depth 980mm - Number of shelves: 3 piece

Tool cabinet for bending tools suitable for AMADA/PROMECAM or type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allows the two-sided access to the tools -any adjustment of the inserting -robust steel construction, powder-coated -side fork guide rails for transport by means of forklifts (cavity under the cabinet) -the drawers run on roller slide rails (serve as additional stabilization) Cabinet can be disassembled - Number of drawers: 4 squares - Mass of a drawer : - Total height 1200mm / Total width 850mm / Total depth 1050mm - Mass of the faeces in a drawer: compartment hhoehe set to 210mm (is varriabel) - Fachhoehe total usable without intermediate boeden 990mm - Tray width usable 130mm - Depth usable 980mm - Number of intermediate boeden: 3 stueck

Tool cabinet for press brake Good for WILA / TRUMPF tools or Type B L / W / H: 1180 mm x W 850 mm / H 1200mm, 350kg -ausziehbare drawers, allows the double-sided access to the tools -beliebige height adjustment of shelves -robust steel construction, powder coated -Lateral fork guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) -The cabinet can be dismantled - Number of drawers: 4 pieces - Dimensions of drawer: - Total height 1200mm / 850mm total width / total depth 1180mm - Dimensions of the compartments in a drawer: - Fachhhoehe adjusted to 210mm (is varriabel) - Trade Height total usable ohnen shelves 990mm - Trade width 130mm available - Trade depth usable 1100mm - Number of shelves: 4 pieces / completely continuous; "ready for operation"

Tool cabinet for press brake Good for AMADA / PROMECAM or Type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allowing access from both sides of the tools -any height adjustment of shelves -sturdy steel construction Fork-lateral guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) , the cabinet can be broken - Number of drawers: 4 pieces - Dimensions of a drawer: - 1200mm Overall height / Overall width 850mm / 1050mm Overall depth - Dimensions of the compartments in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Total compartment height 990mm shelves available ohnen - Usable shelf width 130mm - Usable shelf depth 980mm - Number of shelves: 3 piece

Opening tool unit/geared motor for coconut fiber ropes. Thus, twisted coconut fiber ropes can be rotated up from 3 to 4 cm thick. 220 volt connection, can also be converted to 380V. Gedwistete coconut fiber stricke can be processed into loose fibers. Top runs the knitting pure, is turned up and fall down the loose fibers out. Fully functional.

Praezision clamping tool Kombi plug-on pins BestNo. 1052-018 2 stub SK60x40x27 Unused and ovp 1 x as good condition Only against bid! Special price

Travel X / Y / Z 350/250/300 mm Table size 560 x380 mm C-axis 6-fold tool changer Hirschmann clamping system extinguisher

50 pcs tool cassettes for inserts Fabr. Widax-Heinlein

Electric tool changer RASTER Premat EWD20

Standard performance connection to 380 V, 50 Hz, 3-phase. Equipment: 2 grinding spindles zubehoer ample tool weight:600 kg Flue requirements:1.5x2.6 m -cooling agent device with electric pump

-Manufacturer: VEB watch Kombinat Ruhla / Germany -Model/type: FUW 315/III -electrical connection: 3 ~ 380V 50 Hz 27,2A -electrical power: kW 7.8 -Traverse path x-axis approx. 500 mm -Travel in Y-axis 520 mm -Traverse path z-axis approx. 440 mm -Working table size 315 x 1000 mm -Table load 150 kg -Tool holder 2 spindles: ISO 40 - speed 2 spindles: infinitely variable 35-1800 rpm -Horizontal spindle travel: 280 mm -Vertical spindle stroke: 80 mm

allows. Tool steel grinder Simon Frankfurt with double-sided grinding devices single Schleifspindelmotore two-stage diamond grinding wheel diameter 150 mm Swivel-Tilt tables-with scales complete tub Leofh dimensions approx. 155 cm x 80 cm x 130 cm

CNC machining tool Morari Swivel unit with recording ISO-30 maximum speed 15000 rpm with test certificate Built in 2000 Excellent condition, ready for use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

No. 4293: 1 gebr. Universal tool milling machine Fabr. EPPLE, type UFM 100 Digi,. Bu. 2004 with 3-axis digital display ARB.-ber.: 620 x 250 x 440 mm, Accessories: table 1120 x 260 mm Universal milling head Other: Spinedel SK 40 Spindle speed 40 - 1600 min-1 Weight 1600 kg

1 box with various tool stops turning

Control Sodick Mark XI Travels X / Y / Z: 350 x 250 x 280 mm Travel C: 360 ° 16-fold tool changer extinguishing system

Center distance: 0 mm Grinding head Z-axis: 0 mm Center height: 0 mm CNC Brand: 0 CNC Model: 0 Control: GE FANUC Series 160i-MB Operating hours: 0 Technical data Number of axis simultaneous: 5 Table length: 500 mm Table width: 145 mm X axis: 380 mm Y axis: 300 mm Z axis: 280 mm grinding diameter: 240 mm Grinding-wheel diameter: 50 - 250 mm A axis (grinding head rotaion): 360 ° C axis (tool rotaion): 210 ° Resolution: 0.0001 ° Spindle nose: HSK: 50 Grinding spindle speeds: stepless from: 50 rpm up to: 10000 rpm Max forwarding speed: 20 m/min Max. forwarding speed cross: 5 m/min Max forwarding speed vertical: 20 m/min Voltage 50 Hz 3x: 400 Volt Spindle power: 9 kW Total power required: 27 kVA Machine´s weight about: 8000 kg Overall dimensions machine: Length: 2270 mm Width: 1700 mm Height: 2260 mm Various accessories: 3D measuring feeler gauge Set of collets Set of flanges Set of ...

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 260 mm Distance between centres: 2000 mm Swing over cross-slide: 340 mm Swing over bed: 520 mm Swing in gap: 620 mm Length of the gap: 145 mm Workpiece weight on centres max.: 760 kg Spindle hole: 42 mm Taper in spindelstock metric: 50 Taper in spindle: Camlock: D6" Spindle speeds: number (steps): 13 from: 20 rpm up to: 1800 rpm Pitch of leadscrew: 6 mm Steep thread transmission: 6:1 Taper in tailstock:: 5 MT Spindle diameter: 80 mm Spindle stroke: 200 mm Feeds: length: from: 0.045 mm/r up to: 2.52 mm/r Frontal: from: 0.003 mm/r up to: 1.75 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 15 HP Machine´s weight about: 2500 kg Overall dimensions machine: Length: 3740 mm Width: 1300 mm Height: 1600 mm Various accessories: Face plate diameter: 550 mm 3-jaw chuck diameter ...

Zoller tool pre-setr with change adapter for index GE / GB / ER / machines as well as Gildemeister GM / Schuette lathes partly universally applicable (VDI etc) - with Heidenhein measuring device - various base holders - Measuring table Etc.

Center distance: 0 mm Grinding head Z-axis: 0 mm Center height: 0 mm CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 840 D / WINDOWS XP Operating hours: 32767 Technical data Number of axis total: 5 Linear Axes direct driven Rotary axes axes direct drives Direct measuring system X, Y and Z axis X axis: 400 mm Y axis: 250 mm Z axis: 250 mm grinding diameter: 1 - 10 mm Tool lenght Distance from table to A axis: HSK 50E Collet attachment: 15 W Spindle nose: HSK: 50 Grinding spindle speeds: stepless up to: 12000 rpm Grinding spindle motor: 8 kW Total power required: 20 kVA Machine´s weight about: 2800 kg Overall dimensions machine: Length: 1990 mm Width: 1640 mm Height: 1960 mm Various accessories: Grinding wheel changer 5-fold Automatic Workpiece guiding system Central lubrification fire extinctor

Sell a tool grinding machine especially for grinding stools or similar. One side is equipped with a chuck that can be adjusted in all directions. The whole thing is on a cross support Dimensions 16001000'1500mm High Clamping range chuck 4040mm Grinding wheels diameter 175mm50mm and 320mm50mm Voltage probably 110V

Alu window profiles Punching tool for end hole ventilation 4 stations

CREASING– PERFORATING TOOL FOR ADAST-DOMINANT AD725 PAN ( + VERSION) Available: immediately

Center distance: 0 mm Grinding head Z-axis: 0 mm Center height: 0 mm CNC Brand: 0 CNC Model: 0 Technical data grinding diameter: 1.0 - 12.7 mm Grinding length: 0 -75 mm Helix angle: 0 - 89 ° Tool lenght: 30 - 200 mm Axial motion: Crosswise: 87 mm Longitudinal: 80 mm Vertical: 38 mm Collet attachment: 15 W Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 1800 kg Overall dimensions machine: Length: 1830 mm Width: 2040 mm Height: 2100 mm Various accessories: Automatic loading: 200 - 500 pce Loading roboter Description: Chargement automatique des forets ou fraises Plateaux de chargement de 200 à 500 pièces

Center distance: 0 mm Grinding head Z-axis: 0 mm Center height: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 200 mm Distance between centres: 280 mm Max. grinding diameter: 200 mm Grinding-wheel diameter: 125 mm Taper in spindle:: 5 MT grinding spindle: Longitudinal way of table: 150 mm Transversal way of the table: 140 mm Slewing range of grinding head: horizontal: 90 ° vertical: 90 ° Grinding spindle speeds: number (steps): 3 from: 4500 rpm up to: 7100 rpm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 3 HP Machine´s weight about: 560 kg Overall dimensions machine: Length: 620 mm Width: 500 mm Height: 1500 mm Various accessories: Set of collets Set of grinding wheel arbors 6-jaw chuck diameter Cylindrical grinding attachment Set of grinding wheels Lamp Tool cabinet

Spindle: ISO 30 Travel (X/Y/Z): 300 / 200 / 350 mm Speeds: (8) 80 - 2200 rpm Spindle stroke: 45 mm Feed: 20 - 200 mm/min Table size: 600 x 200 Extension: 110 mm Head swivel: +/- 90° Engine power: 1.1 / 1.4 kW Connection: 380 V / 16 A Dimensions, approx.: 1280 x 1120 x 1750 mm Weight approx.: 450 kg Facilities: - Swivel milling head +/- 90° - 3-axis digital display - Coolant foot with pump - Emergency-off-stroke button - Machine light - Milling machine vice RB 133 with turntable, Röhm - 4 tool holders

Tool adjuster, adjustment and measuring instrument used Manufacturer E. Zoller Type: V420D2-00172 EC Type: V420D2-00294 VENTURION 500 Built: 2003 Dimensions: approx. 1600 x 1000 x 2000 mm

Technical data Centre height: 140 mm Distance between centres: 750 mm Table length: 1050 mm Table width: 150 mm Max. grinding diameter: 279 mm Grinding-wheel diameter: 150 mm Longitudinal way of table: 450 mm Transversal way of the table: 230 mm Vertical adjustment of grinding head: 250 mm Slewing range of grinding head: horizontal: 342 ° vertical: 325 ° Grinding spindle speeds: number (steps): 6 from: 2000 rpm up to: 6000 rpm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 1.50 HP Machine´s weight about: 1100 kg Overall dimensions machine: Length: 1450 mm Width: 1200 mm Height: 1000 mm Various accessories: Set of collets Set of grinding wheel arbors Tailstock Set of centers Tool cabinet Vice: width

AGIETRON HYPERSPARK 2 HS Sinker 2008 Design with lowerable working container Work table with 50 mm hole grid travel X/Y/Z 350x250x350 mm -Workpiece size: LxWxH=650x580x250 mm or 820x420x250 mm Integrated C axis, for rotation, indexing and erosion Electronic laser measurement of all axes Detection of the electrode and workpiece position 1 set of documentation (CD + manuals) AGIEVISION 5 Control with multitasking DNC interface with transmission protocolXon/Xoff and LSV2 2 serial interfaces RS 232C for DNC and master computer LAN connection for data exchange via in-house network RJ45 3 drives: hard drive, 3 1/2" floppy disks, CD-ROM Without tool changer

Tool grinding machine Walter UWS30 CY - original condition - Width: 120cm - Height: 140cm - Depth: 100cm - with electric stroke adjustment - Sub-machine, 8 grinding shots - Grinding wheel pulling device - Electrical documentation + equipment Good condition fully functional can be visited and tried out on site. Shipping abroad. Visit: Basically, I would like to point out to you that in order to avoid misunderstandings, the article can be viewed before purchase and tested under electricity. Please ask questions before purchasing to avoid any ambiguity. If you have any general questions or make an appointment for a visit, I can be reached at any time, using the telephone number below or above. Errors in the description and intermediate sale reserved. The VAT is shown separately on my invoices. Shipping with forwarding.

No. 3287: 1 gebr. Universal toolmilling machine Fabr. DECKEL, type FP 1, Bauj. 1988 with active digital display Arb.-Ber.: 300 x 160 x 340 mm, drive power: 1.5 kW Accessories: rigid angular table Table size 210 x 600 mm Universal table Counterholder Other: Speed range 2000 rpm Tool holder SK-40

60P Hi-Dyn 5 Axis CNC Machining Centre (2005) - Heidenhain Heros iTNC530 Control, - CAT40 Taper, - 630mm Diameter Table, - 60 Tool ATC, - Swarf Conveyor, - Coolant Filtration. S/No. 1116-000201-3 - - include CAT 40 Tooling suitable for Deckel Maho with Universal 3D Tester. - Aditional table with holders - 26 tools holder included AND 3d PROBE - HIGH PRESSURE 40 BAR COOLING TROUGH SPINDLE - COOLING TROUGH SPINDLE - NEW CHILLER IN 2021 - NEW HARD DISCS IN 2021 DECEMBER SPINDLE HOURS: 21400 MOST OF TIME MACHINE CUT FIBERGLASS AND PLASTIC, ALU and a bit mild steel. For customer we organize free loading . Transport we organize as well with an separated offer.

Milling machine lid FP 4 NC Built c. 1992 with controlled C-axis 2 pieces of screw sticks Various tool holders Machine is in top condition and was last serviced on 20.08.2020 for approx. 3.000,- € (net). documents available. The machine is sold only because of space requirements. Location of the machine: 76661 Philippsburg

Center distance: 400 mm Grinding head Z-axis: 295 mm Center height: 0 mm CNC Brand: Fanuc MACH-id     4304 MAKE          Schneeberger Swiss TYPE            ARIES 2 YEAR           2008 SPECIFICATIONS Controll          FANUC POWER MATE Cylindical / Surface / Other Tool grinder        Grinding diameter Ø       420 mm X - Travel          400 mm Y - Travel        220 mm Z - Travel          295 mm Grinding wheel size        50 - 250 mm kW power on spindle       2.2 kW Spindle speeds / ranges        6000 Rpm Internal grinding attachment      yes Coolant /  ...