tool grinding machine used for sale

A Schneeberger CNC profile and tool grinding machine including robot cell, coolant filtration system and cooling unit is available. Travel X/Y/Z: 420mm/310mm/340mm, spindle power: 15kW, speed: 6000rpm, spindle interface: HSK80, robot: Fanuc, tool positions: 10. Machine dimensions X/Y/Z: approx. 2500mm/2500mm/2200mm, weight: approx. 9000kg, control: Fanuc 160i-MB, software: Schneeberger Quinto 4, operating hours: approx. 31893h. Documentation available. An on-site inspection is possible.

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m GENERALÜBERHOLT Foto von ähnlicher bereits gelieferter Maschine - Schleifscheibenausrüstung LINKS 500mm - Schleifscheibenausrüstung RECHTS 400mm - Innenschleifeinrichtung 120mm für riemengetriebene Innenschleifspindeln (standard) - CNC-Steuerung FANUC 18i-TA - vorbereitet für Messsteuerung Marposs kombiniert (Minialsar, Positionar)mit E5N - B-Achse - Kel-Set - hydraulischer Pinolenrückzug - Mikroverstellung am Reitstock - Werkstückspindelstock mit schwenkbarem Unterteil - Schleifscheibenausrüstung LINKS 500mm - Schleifscheibenausrüstung RECHTS 400mm - Innenschleifeinrichtung 120mm für riemengetriebene Innenschleifspindeln (standard) - CNC-Steuerung FANUC 18i-TA - vorbereitet für Messsteuerung Marposs kombiniert ( ...

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Teilüberholte Maschine mit Messprotokoll nach Neumaschinentoleranz NEUE Steuerung Eckelmann ENC mit BEMA Schleifsoftware KEL-ASSIST für Kelco 90 numerisch gesteuerte B-Achse Innnschleifrinrichtung Dia 80mm Schleifscheibe links Durchmesser 400mm Schleifscheibe rechts Durchmesser 300mm Innenschleifspindel HJN 828 hydraulischer Reitstock Mikroverstellung KEL SET Messsystem The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grinding width 1350 mm CE VERSION V400/50 50-Hz Side viewing windows for the grinding units  LED Interior Lighting Vacuum table with 4 kW fan fan Infeed and outfeed roller table for long workpieces Tynex structuring unit at the outlet 5.5 kw Structuring brush K46 and pressure roller at the outlet Z-version for RRTC 135 - Pneumatic roller on/off on the calibration unit with steel roller - Pneumatic roller on/off on the fine grinding roller  - Pneumatic roller on/off on the TC combination unit - Electronic semented sanding shoe (56mm pitch) - Electronic

Grinding width 950 mm Ce version V400/50 1 belt combi unit design Steel roller for calibration  Grinding bug selection from the control panel Sanding shoe selection from the control panel  Sanding Pad Control On/Off FOX500KRT Electronic table positioning from the grinding table  Entrance and exit table extensions Moving carpet centering 

Grinding width 950 mm  Steel roller for calibration  1 belt combi unit design Ce Version V 400/50 Entrance and exit table extensions Moving carpet centering  Automatic electronic operation control

2 engines  Motorized height adjustment  Table length 300 cm without extraction fan  Space requirement length 430 cm

Work table, mm 750 x 300 Table height adjustment, mm 200 Strap length, mm 2600 Belt width, mm 150 Sanding belt rear panel, mm 850 x 200 Belt speed, m/s 20 Oscillation stroke, mm 20 Oscillatory motor, kW (hp) 0.25 (0.34) Speed, min-1 2840 Space bed, mm 1600 x 850 x 1350 Engine power, kW (hp) 3.0 (4.0) Weight, kg 180

Swivelling grinding unit up to 45 Work table 960 x 350 mm Table height adjustment 230 mm Belt length 3000 mm Belt width 200 mm Engine 3 kw 4 hp Weight 450 kg

Wide belt grinding machine  with 3 rollers and 3 belts Grinding width 1300 mm Year of manufacture 2001 Power 33 kw 2 main engines  Amper 69

Belt Sander Flott BSM 75A

Double side grinding of flat mass parts, e.g. cams, piston rings. Machine type: Planet V7 Machine No.: 381019 Technical data Double page flat grinding Part diameter: max. 180 mm Part thickness: max. 100 mm Condition: Technical – very good, Optical – as good as new (Pictures partly similar) Seller Offer No. resale 770057

Speed Finishing Device Processing of rollers, including for the paper, printing and steel industries. Machine Type: Speed Finisher Machine No.: 721615 Technical data Workpiece diameter 80 – 500 mm Condition: Technical – very good / Optical – as good as new (Pictures partly similar)

A horizontal surface grinding machine Elb is available. Grinding process: peripheral grinding, table dimensions X/Y: 915mm/255mm, magnetic chuck dimensions X/Y: 600mm/310mm, grinding dimensions X/Y: 600mm/300mm, max. grinding height: 400mm, feed rate: 30m/min, speed: 2600rpm, machine dimensions X/Y/Z: approx. 2000mm/1600mm/2100mm, weight: approx. 2750kg. An on-site inspection is possible.

Key data: 700 mm, 350 mm

A Blohm Simplex 7 surface grinder is being sold. Grinding length: 700 mm Grinding width: 350 mm Table clamping surface: 1,100 x 300 mm Self-dismantling and self-collection. Price is net plus VAT All information without guarantee

Gear diameter range: 10mm-330mm, gear width: 180mm, max. module: 7, min. module: 0.5mm, clamping length: 420mm, number of teeth range: 10-600, helix angle: +/-45°, speed: 1900rpm, grinding wheel diameter range: 280mm-350mm, grinding wheel width range: 84mm-104mm. Machine dimensions X/Y/Z: approx. 4500mm/6000mm/2300mm, weight: approx. 5100kg, control: Fanuc Series 160i-T. Documentation available. An on-site inspection is possible.

A Jung CNC surface and profile grinding machine is available. Grinding dimensions X/Y: 300mm/600mm, table dimensions X/Y: 300mm/1000mm, spindle center to table distance: 150mm-600mm, max. table load: 400kg, table height: 925mm, travel X/Y/Z: 600mm/450mm/345mm, feed rate X: 40m/min, feed rate Y/Z: 4m/min, grinding spindle speed: 5000rpm, max. grinding wheel dimensions X/Y/Z: 400mm/60mm/127mm. Machine dimensions X/Y: approx. 3300mm/2300mm, weight: approx. 4500kg, control: Siemens 840D sl. Including accessories. Documentation available. An on-site inspection is possible.

Geibel + Hotz RS 1000 CUYear of manuf. : 2017 Control : Siemens 840 Dsl Grinding length : 1000 mm____________Description:In General:Year of manufacture:2017Control system:Siemens 840 DslCentre height:180 mmCentre distance:1,000 mmMaximum workpiece weight:150 kgX-Axis:Technology:ElectromechanicalTransverse speed:0.001 – 8,000 mm/minMeasuring system:Direct, 0.0005 mm (glass scale)Guideway:Flat guideZ-Axis:Technology:ElectromechanicalTable speed:0.01 – 12,000 mm/minMeasuring system:Direct, 0.0005 mm (glass scale)Guideway:Flat guideB-Axis:Technology:Continuously swivelling axisResolution:0.001°Clamping:HydropneumaticWorkpiece spindle:Power:2.0 kWSpeed:0–600 rpmChuck:MK 5 and KK 5C-axis:0.001°Grinding spindle:Disc configuration:left/rightPower:9 kWSpeed:1,400 rpmInternal grinding spindle:Power:2.2 kWSpeed:60,000 rpmTail stock:Quill stroke:40 mmMounting:MK 4Quill retraction:Hydra ...

grinding diameter: - mm grinding length: - mm centre height: - mm mechanical: ja centre distance: 2000 mm weight of the machine ca.: 7,9 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: - mm grinding length: - mm centre height: - mm mechanical: ja centre distance: 2000 mm weight of the machine ca.: 7,9 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 75 mm band length: 2000 mm band speed: m/min total power requirement: kW weight of the machine ca.: 90 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Joerg CNC precision cylindrical grinding machine for tools and rotationally symmetrical precision parts is available. Workpiece diameter range: 0.1mm-16mm, Speed: 10000rpm, Workpiece holding: W20/W25, Max. workpiece length: 250mm. Machine dimensions X/Y/Z: approx. 1900mm/2000mm/1950mm, Weight: approx. 3000kg. Documentation available. An on-site inspection is possible.

Inv. Num. : 9278 Type: HSS-10 Producer: MAAG Generated: Parameters: Maximum grinding wheel diameter: 220 mm Max. workpiece weight: 6 kg

A universal external and internal cylindrical grinding machine Tachella, refurbished in 2021, is available. Center distance: 600mm, center height: 120mm, max. grinding diameter: 240mm, max. grinding length: 600mm, X/Z travel: 600mm/250mm, max. workpiece weight: 100kg/40kg. Machine dimensions X/Y/Z: approx. 2700mm/1900mm/1700mm, weight: approx. 2500kg. Documentation available. An on-site inspection is possible.

grinding length: 500 mm grinding width: 230 mm table-size: 510 x 200 mm grinding wheel diameter: 225 mm weight of the machine ca.: 1.5 t Magnetic plate 1000x500mm www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 700 mm grinding width: 550 mm workpiece height: 500 mm table-size: 1320 x 500 mm grinding wheel diameter: 400 mm weight of the machine ca.: 3.9 t Magnetic plate 1000x500mm www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This PALMARY PCB-4520-3 centerless grinding machine was manufactured in 2024. It features a workpiece diameter capacity of Ø8–60 mm and a maximum workpiece length of 150 mm. The machine includes an automatic unloading attachment and adjustable speed for enhanced efficiency. If you are looking to get high-quality grinding capabilities, consider the PALMARY PCB-4520-3 machine we have for sale. Contact us for further details.

Table support or sanding length: 200 x 400 mm Sanding belt dimensions: 200 x approx. 1500 mm 2 belt speeds due to pole-switchable motor: 8/16 m/s Drive motor: 380 V, 1.8/2.2 kW Weight: 145 kg Space requirement: 1000 x 750 x 1100 mm

A modular profile and edge belt sanding machine is offered for sanding solid wood and veneered edges in continuous operation. Feed rate: 5-25m/min, Units: 5, Workpiece thickness range: 12mm-60mm, Conveyor chain: 80mm, Sanding belt length: 2000mm, Sanding belt width: 20mm/35mm, Belt speed: approx. 7m/s, Max. working radius: 12mm. Machine dimensions: approx. 2670mm/1200mm/1800mm. Weight: approx. 1200kg. Documentation available. Inspection possible by appointment.

External/Internal Cylindrical Grinding TARDUGNO RIBON type MODULE 2A Between points: 1000 mm Centre height: 180 mm Workpiece holder spindle CM4 Maxi grinding diameter: Ø 360 mm Workpiece holder rotation: from 35 to 310 RPM Year of construction: 1990 Tilting table - 9° / + 6° Grinding wheel dimensions: Ø 406 mm x thickness 60 mm Spindle speed: 1500 - 1730 RPM Grindstone motor: 5,5 CV Hydraulic tailstock CM3 Auto wheel advance Internal grinding spindle: Max speed 20000 RPM Maxi boring: from 14 to 75 mm Lubricant tank+ paper filter Diamond system Voltage: 380 V Dimensions (L x W x H): 3500 x 2000 x 2200 mm Weight: approx 3,2 T

grinding length: 600 mm grinding width: 350 mm workpiece height: mm table surface area: 1720 x 400 mm dimensions of grinding wheel: 400 x 50 x 127 mm table height over floor: mm : 600 x 300 mm grinding spindle speed: 3000 U/min table load capacity: kp total power requirement: kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 3,0 x 2,0 x 2,2 m Surface grinding machine - Magnetic grinding wheel - Coolant system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 5-axis Kapp RNS 55 was manufactured in 2005. It features multiple grinding spindles, including three with a diameter of 20 mm and seven with a diameter of 40 mm. The machine is CE marked. If you are looking to get high-quality grinding capabilities, consider the Kapp RNS 55 cylindrical grinding machine we have for sale. Contact us for further details.

Sanding belt width: 200 mm Sanding belt length: 1800 mm Table support surface: 230 x 600 mm 5 grinding speeds by V-belt step pulley drive electr. Connection: 400 V, 0.55 kW

CN Centerless grinding machine, ROSSI MONZA 1500 CN, currently being overhauled and fully electrically/electronically retrofitted, Siemens electronics with touchscreen, brushless motor on Z (workpiece diameter) and regulating wheel (adjustable RPM), step motor on grinding wheel dressing increment, auto size compensation after grinding wheel dressing, Grinding wheel 350 mm 610 mm dia, This machine can be inspected in our warehouse in Gussago BS Italy Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc. During centerless plunge grinding, the workpiece is ground in one pass thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece to work which is g ...

grinding length: 600 mm grinding width: 400 mm workpiece height: 350 mm table-size: 820 x 350 mm dist. center of grinding spindle - table: 140-525 mm table movement: 660 mm workpiece weight max.: 400 kg diameter / bore of grinding wheel: 350 x 50 x 76,2 mm table speeds: 2-28 m/min power capacity - grinding motor: 3,7 kW total power requirement: 8 kW weight of the machine ca.: 2100 kg dimensions of the machine ca.: 4,5 x 3 x 2,4 m Geipel & Hotz FS 60 AC surface grinder, built in 2001, in good condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A compact Walther Trowal vibratory finishing system is available. 1) Walther Trowal ZM 03-FL process water treatment system, Year of manufacture: 2017, Throughput: approx. 1000l/h, Drum capacity: 14l, Acceleration: 2012g, Wastewater tank: 300l, Process water tank: 150l, Compound savings: 90%, Water savings: 98%, Machine dimensions X/Y/Z: approx. 1400mm/1200mm/1750mm, Weight: approx. 600kg, Control system: PLC. 2) Walther Trowal MV 21 vibratory finishing machine, Year of manufacture: 2017, Max. usable capacity: 130l, Ceramic media/plastic media filling capacity: 230kg/150kg, Max. workpiece dimensions diagonal: 570mm, Speed: 3000rpm, Working bowl diameter: 616mm, Working bowl depth: 470mm, Machine dimensions X/Y/Z: approx. 1250mm/1050mm/1200mm, Weight: approx. 900kg, operating hours: approx. 913h. Documentation available. An on-site inspection is possible.

grinding diameter: 450 mm grinding length: 1000 mm centre height: 225 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Fotos von bereits gelieferten Maschinen. Mechanische Überholung: -komplette Maschine nach Kellenberger Messprotokoll überholt -Neue servicefreundliche Kabine -Neulackierung Elektrische Überholung: -FANUC Steuerung mit BLUE-SOLUTION -Neu aufgebauter Schaltschrank -Neue Antriebstechnik -Austausch sämtlicher elektrischer Leitungen Berus Druckschalter etc. -Neue Absolut-Glasmaßstäbe in x- und z -Neuer Absolut Drehgeber (Bei-B-Achse) Fotos von bereits gelieferter Maschine mit anderen Optionen. Schleikopfvariante UR/RS: -Schleifscheibenanordnung für Aussen -und für Schrägeinstichschleifen hintereinander! -Dadurch jeweils 400mm Scheibendurchmesser! -Dadurch wesentlich geringere Kollisionsgefahr -Einfacheres programmieren -Sch ...

Dimensions (L/W/H): 2450x820x1380 mm Weight: 1500 kg Total power requirement: 2,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1500x700x1600 mm Weight: 900 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1700x900x1350 mm Weight: 300 kg Total power requirement: 1,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1500x700x1600 mm Weight: 900 kg Total power requirement: 1,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2450x820x1380 mm Weight: 1500 kg Total power requirement: 2,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis AMADA Techster 84 surface grinding machine was manufactured in 2015. It features an X-axis travel of approximately 780 mm and a Y-axis travel of approximately 450 mm. The machine is equipped with a powerful 7.5 kW spindle motor and a magnetic chuck size of 700 × 400 mm. If you are looking to get high-quality grinding capabilities, consider the AMADA Techster 84 machine we have for sale. Contact us for further details.

This PALMARY GU32x60S cylindrical grinding machine was manufactured in 2015. It features a swivel over table of Ø320 mm and a distance between centers of 600 mm, allowing for a max external grinding diameter of Ø300 mm. With a grinding wheel speed of 45 M/s and a spindle speed up to 300 r.p.m., this machine is ideal for precision work. If you are looking to get high-quality grinding capabilities, consider the PALMARY GU32x60S machine we have for sale. Contact us for more information.

This 5-axis KUGLER Micromaster MG2 was manufactured in 2002. It features an X-axis travel of 250 mm, Y-axis travel of 305 mm, and Z-axis travel of 200 mm. The machine is equipped with a high-speed Fischer Precise spindle, capable of speeds between 60,000 and 160,000 rpm, and a SERCOS real-time motion control interface. If you are looking to get high-quality grinding capabilities, consider the KUGLER Micromaster MG2 ultra-precision micro-grinder we have for sale. Contact us for further details.

Ref.nr. 00926 Name of the plant Struers Labopol Grinding and polishing workstation For sale is a professional grinding and polishing workstation Labopol for metallographic sample preparation. The system is suitable for laboratory, quality assurance and materials testing. Manufacturer: Struers Model Labopol 2 Year of construction Condition Technically OK Can be viewed under power Remark Grinding machine function with diamond grinding wheels + water cooling Ref.Nr 00927 Name of the system Struers Labotom-3 separator For sale is a Struers Labotom-3 precision separator for materials testing and metallographic sample preparation. The machine enables precise and reproducible cutting cuts. Manufacturer: Struers Model Labotom-3 Year of construction unknown Condition Good technical condition, can be demonstrated under power Remark Cutting device for grinding  ...

Table size: 3000 x 1000 mm Drive power: 4.0 kW Sanding belt speed: 8 – 25 m/s Table height adjustment: 0 – 630 mm Sanding belt lengths: 9000 mm Space requirement: 4750 x 2300 mm Machine height: approx. 2500 mm Compressed air: 6 bar Features: -Two sanding belts for pre-sanding and finishing sanding -Triangle guide of the straps for a clear view and freedom of movement -Pneumatic abrasive belt clamping with ball guides -Adjustable belt speed -Tilting of the sanding belts up to 90° -Self-centering abrasive belt -Pneumatically opening belt channels -Manual workpiece movement in 3-axis -Each axle with brake or lock -Vacuum tension for the workpieces

A Costa Levigatrici wide belt grinding and deburring machine is available. Working width: 1150mm, abrasive belt dimensions X/Y: 1180mm/2200mm, max. speed: 18m/s, contact roller diameter: 200mm, pressure roller diameter: 55mm, max. workpiece thickness: 160mm. Machine dimensions X/Y/Z: approx. 1850mm/1950mm/2100mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible.

A Costa Levigatrici wide belt sanding and deburring machine is available. Working width: 1350mm, sanding units: 2, abrasive belt dimensions X/Y: 1380mm/2620mm, working height: 920mm, contact roller width: 1350mm, contact roller diameter: 200mm, roller hardness 1/2: 35Shore/80Shore, max. abrasive belt speed: 18m/s, machine dimensions X/Y/Z: approx. 2050mm/1900mm/2350mm, weight: approx. 2800kg. Documentation available. An on-site inspection is possible.

Distance between centers: 600mm, center height: 140mm, max. swing diameter: 275mm, max. workpiece weight overhung/between centers: 30kg/100kg, feed X/Z: 8m/min, workhead spindle taper: MK4, tailstock taper: MK4, tailstock quill travel: approx. 35mm, grinding wheel dimensions: 400mm/50mm/127mm, grinding spindle speed: 1425rpm, internal grinding spindle speed: 16800rpm, max. internal grinding wheel diameter: 100mm, filter volume: 300l, filter capacity: 100l/min, chuck diameter: 160mm, operating hours: approx. 350h. Including chuck, magnet and dressing device. Machine dimensions X/Y/Z: approx. 3000mm/2700mm/2050mm, weight: approx. 4500kg. Documentation available. An on-site inspection is possible.