134,762 used machines on RESALE, but how to find them? Machine Search
grinding range: 600 x 300 x 400 mm magnetic plate size: 600 x 300 mm distance spindle center to table: 5500 mm max. table load: 250 kg grinding wheel speeds: 1.900 U/min longitudinal feed: 680 mm cross travel: 245 mm Surface Grinding Machine | STÖCKEL - FX 6030 ST-2 The machine is in good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FX6030 | FX-6030 | FX6030ST | FX 6030 ST The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Long belt sanding machine Höfer Long belt sander Höfer approx. 1000 x 2500 mm Machine is FUNCTIONAL and ready for demonstration from PENSION/Handicraft business From the carpentry site, as seen NET € 1,500.00
Distance between points: 1100 mm, Center height: 175 mm, Maximum diameter to be rectified: 270 mm, Maximum piece weight: 135 Kg, Working wheel dimensions (od x id x width): Ø508xØ304.8x80 mm, Main engine power: 7.5 Kw, numerical control: Fanuc 21 Oi-T
Grinding wheel dimensions (od x id x width): 325 x 175 x 125 mm, Ø min/max to be rectified: 1.5 / 50 mm, Grinding wheel width: 125 mm, Control type (cnc/manual): Manual, Regulating wheel dimensions (od x id x width): 220 x 125 x 125 mm, No. of regulating wheel speeds: infinite, Regulating wheel width: 125 mm, Grinding wheel head motor power: 7,5 Kw, Long: 1520 mm, Width: 1020 mm, Tall: 1260 mm, Weight: 1600 Kg
Grinding wheel dimensions (od x id x width): Ø 406 x Ø 203 x 200 mm, Ø min/max to be rectified: 1.5/100mm, Regulating wheel width: 200 mm, No. of regulating wheel speeds: infinite, Min/max speed of regulating wheel (r.p.m.): 0/450rpm, Regulating wheel dimensions (od x id x width): Ø 270 x Ø 140 x 200 mm, Grinding wheel width: 200 mm, Grinding wheel head motor power: 15 kW, Long: 2020 mm, Width: 1300 mm, Tall: 1420 mm, Weight: 4200 Kg
grinding diameter: 1000 mm grinding length: 2000 mm centre height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding length: 1000 mm grinding width: 375 mm workpiece height: 375 mm total power requirement: 9 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding diameter: 0/ mm grinding length: 960 mm feed in: mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 0/ m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding length: 600 mm grinding width: 300 mm workpiece height: mm total power requirement: kW weight of the machine ca.: 2,9 t dimensions of the machine ca.: 2,9 x 2,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 3,6/3,5 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Basis: Kellenberger Kel-Varia Baureihe mit Kelco 90 Steuerung. Mechanische Überholung: -komplette Maschine nach Kellenberger Messprotokoll überholt -Neue servicefreundliche Kabine -Neulackierung Elektrische Überholung: -Neue moderne CNC-RUNDSCHLEIFMASCHINEN-Steuerung -Neu aufgebauter Schaltschrank -Neue Antriebstechnik -Austausch sämtlicher elektrischer Leitungen Berus Druckschalter etc. -Neue Absolut-Glasmaßstäbe in x- und z -Neuer Absolut Drehgeber (Bei-B-Achse) Standardausstattung ...
Grinding wheel dimensions (od x id x width): 508 x 304.8 x 254 mm, Ø min/max to be rectified: 1.5 / 120 mm, Regulating wheel width: 254 mm, No. of regulating wheel speeds: infinite, Min/max speed of regulating wheel (r.p.m.): 10/250 rpm, Regulating wheel dimensions (od x id x width): 305 x 190.5 x 254 mm, Grinding wheel width: 254 mm, Hydraulic motor power: 0,55 kW, Total power: 27 kW, Voltage: 220/380 V, Long: 2.300 mm, Width: 1.885 mm, Tall: 1.900 mm, Weight: 6.420 kg
Workshop overhauled 2024, ready-to-use DISKUS Doppelplan grinding machine, Lower grinding spindle renewed 2024 Machine No. 7078 Specifications: Grinding spindle 2 pieces vertical Workpiece width 5 - 30 mm Max. workpiece height 10 mm Grinding wheel diameter 300 mm Dimensions of grinding tools Ø 300 x 50 x Ø 75 mm Rotational speed grinding wheel 18 m/s Speed 1150 rpm Lower grinding spindle frequency-controlled Machine weight approx. 2.3 t Accessories: IONIC process control, FAUDI water basin with magnetic separator Replacement flanges, transport washers The machine can be viewed by appointment in our factory in Krefeld. Price ACTUAL condition from stock: on request – Errors, changes and prior sale excepted –
grinding length: 600 mm grinding width: 400 mm workpiece height: mm total power requirement: 11 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
VOUMARD CNC 300 S/N: 300030 Used - Excellent Year: 2007 DESCRIPTION: Machine type: BU 1000 T L7400 Was recently removed from power due to routine upgrades and was making good parts with full functionality. Siemens 840D CNC Control. Manuals included. Has grinding capability for: Internal diameters External diameters Front faces Back faces Internal tapers External tapers Profiles Drive spigots Face keyways Cams Bilobes and trilobes Internal threads External threads Bearing tracks Located at our warehouse in Preston, Idaho. We care about the machines we sell and want all of them to enjoy continued productive and profitable service for our remarkable customers. Included specifications are gathered from various sources such as firsthand inspection, owner or operator interviews, manuals, and OEM research. All machinery specifications, condition and detail ...
Key data: 360 mm
Reishauer Model RZ362A CNC Gear Grinder Maximum Wheel Diameter: 14.17” Maximum Module: 0.275” Minimum Module: 0.0039” Slide Stroke: 6.88” Maximum Helix Angle: ± 45° Maximum Number of Teeth: 600 Minimum Number of Teeth: 6 Maximum Workpiece Weight: 132 lbs. Grinding Wheel Width: 4.09” Grinding Wheel Diameter: 11.02” – 13.77” Speed of Grinding Worm when Grinding: 1100 – 2330 U/min Speed of Grinding Worm when Profiling: 50 – 95 U/min Feed per Revolution of Workpiece: 0 – 0.133” Grinding Worm Infeed Speed: Up to 99.9mm/min / 3.93 IPM Approximate Weight: 14,553 lbs. EQUIPPED WITH: Reishauer CNC Controls. Dittel MBA2000 Balancing Controller. Elbaron R12D Mist Collector. Kato Motor Generator. Freestanding Hydraulic Unit. Hydraulic Oil Pump-Sump System. Free Standing Electrical Control Cabinet. Tailstock. (2) Wheel Hubs. Manuals and Drawin ...
Total power: 38 KVA, Max. length to be rectified: 800 mm, Height of points: 150 mm, Max. piece weight: 80 Kg, Working precision: IT4 ISO, Dimensions of the external grinding wheel: Ø400xØ127x63mm, Max width of grinding wheel: 63 mm, Power of outdoor grinding wheel: 7.5 Kw, Grinding wheel rotation speed: 45 m/s, Max travel X axis: 350 mm, Workpiece head cone: MORSE 5, Workhead spindle speed: 0-1000 rpm, Swivel angle of the working head: 90º, Tailstock cone: MORSE 4, Tailstock stroke: 90 mm, Max travel Z axis: 1000 mm, Table adjustment angle: +/- 8º 30, CNC control: SIEMENS, cnc model: 840 D
Make: YOUNG Type: JF 520 Year of construction 1992 Machine weight : 2200Kg Total weight: 2600kg Location : Haiger Price: 24.000 € excl. VAT. Description: Digital display, Fabr. Heidenhain, microprocessor control, profiling device, Fabr. Diaform, Machine Lighting, Coolant System, Sine Magnetic Clamping Table, Fabr. Jung, type SM 50 Specifications: Clamping surface (L x W in mm) 600 x 200 Grindable surface (L x W in mm) 600 x 250 Magnet size max. mm 600 x 200 Grinding wheel dimensions max. mm 225 x 25 x 51 Distance table/spindle center mm 350 (+50) Table longitudinal feed pendulum m/min 1 – 20 Creep gear mm/min 0 – 500 Grinding spindle drive speed rpm 800 – 4200 Power kW (w/creep gear) 2.2 (3.5)
used
Max. grinding diameter 200 mm Max. sanding length 600 mm Max. workpiece weight 60 kg Device for internal grinding: no Machine dimensions L x W x H 2100x1800x1500 mm Machine weight 2300 kg Center width 600 mm
Inv. Num. : 8043 Type: ML 100 3Z Producer: NS MAQUINAS Created: 2017 Parameters: Max. workpiece diameter: 10-114 mm Minimum length of the workpiece: 335 mm Number of sanding belts: 6 pieces Abrasive belt speed: 10-30 m/s Sanding belt dimensions: 50 x 940 mm Weight: 600 kg
Key data: 1350 mm, 3
electronic control - First roller D=250 mm made of grooved steel - Second roller D=320 mm made of rubber - third roller D=? mm made of steel with carpet with button - Pneumatic on/off of the 3 groups - Air purification fan on the 3 bands - Sanding belt 2620 mm - Electronic oscillation of the abrasive belts - Automatic layer positioner - Variable feed speed of the carpet with inverter KW 2.2 - Vacuum conveyor belt - ionization in the outlet
Workspace Workpiece, weight (max.) 270 kg Distance spindle nose - table surface 580 mm Table dimensions 635 mm x 305 mm Dimensions magnetic clamping plate 600 mm x 300 mm Scale ring pitch Y-axis 0.005 mm Scale ring pitch Z-axis 0.02 mm Auto. Transverse Feed Z-Axis 0.1 mm - 8 mm Speed 1450 1/min Auto. Vertical feed 0.005 mm - 0.05 mm Travel X-axis travel 765 mm Y-axis travel 340 mm Feed hydr. Feed X-axis 7 m/min - 23 m/min Rapid traverse Y-axis 480 mm/min Rapid traverse Z-axis 990 mm/min Drive power Motor power main drive 4 kW Dimensions and weights Grinding wheel dimensions 350 mm x 40 mm x 127 mm Dimensions (length x width x height): 2.9 m x 2.2 m x 1.9 m Weight 2800 kg
Technical details Grinding length max. 600 mm Grinding width max. 350 mm Control conv. Distance from spindle center to table max. 525 mm Magnetic clamping plate 600 x 350 mm max. table load 400 kg Table longitudinal movement 660 mm Table speed 2 - 28 m/min Transverse movement 360 mm Grinding wheel dimensions max. 300 x 50 x 76.2 mm Clamping width max. 30 mm Drive power - grinding spindle 3.7 kW Total power requirement 8 kW Machine weight approx. 2.1 t Space requirements approx. 4.5 x 3.0 x 2.4 m
Universal surface grinding machine of the Jung brand suitable for tooling, fixture construction, training and mould making Bssx7D8P Travel distances : 400 x 150mm Table size : 520x150mm Grinding length 400mm Grinding width 150mm Workpiece height 240mm Table size 520x200mm Connection 50Hz 380V Motor 4.5KW Machine weight approx. 2250kg Dimensions 2500x2100x1900mm
Workspace Workpiece, weight (max.) 500 kg Table dimensions 813 mm x 406 mm Distance spindle nose - table surface 580 mm Dimensions magnetic clamping plate 800 mm x 400 mm Scale ring pitch Y-axis 0.005 mm Scale ring pitch Z-axis 0.02 mm Auto. Transverse Feed Z-Axis 0.1 mm - 8 mm Speed 1450 1/min Auto. Vertical feed 0.005 mm - 0.05 mm Travel Travel X-axis 910 mm Y-axis travel 450 mm Feed hydr. Feed X-axis 7 m/min - 23 m/min Rapid traverse Y-axis 480 mm/min Rapid traverse Z-axis 990 mm/min Drive power Motor power main drive 4 kW Dimensions and weights Grinding wheel dimensions 350 mm x 40 mm x 127 mm Dimensions (length x width x height): 3.6 m x 2.4 m x 1.9 m Weight 3400 kg
Specifications Center width mm 1000 Tip height mm 300 Grinding length mm 1000 Workpiece weight between tips kg 800 Load on the workpiece spindle during on-the-fly grinding Nm 200 X-axis - infeed movement Feed speed mm/min 0.01-8000 Linear measuring system, internal resolution mm 0.0001 Z-Axis - Table Movement Table speed mm/min 0.01-8000 C-axis - workpiece headstock Speed min-1 0-300 Drive power kW 5 Pick-up taper MK 5 / KK 6 Grinding spindles Power grinding spindle motor with water cooling kW 15 Grinding wheel circumferential speed m/s 35 (63) Grinding wheel, standard mm 600x80x203.2 Tailstock MK 5 pick-up taper Workpiece Tension Spring Hydraulic Retraction
Center spacing 1 000 mm Max. diameter of the cylinder to be ground 250 mm Minimum step of the X-axis 0.001 mm Minimum step of the Z-axis 0.005 (0.001) mm Circumferential speed of the grinding wheel 25 – 45 m/s Maximum weight of the workpiece between the tips 80 kg Maximum weight of the workpiece including pick-up – on-the-fly clamping 25 kg Grinding wheel diameter 400 mm Cizctcazsk Grinding head spindle drive 4 kW Kavalír CNC control system
Key data: 110 mm, 1 , 160 mm
Specifications: max. working width: 1100 mm, min./max. workpiece thickness: 3 / 160 mm Sanding belt dimensions: 2150 x 1120 mm, sanding belt speed: 18 m/sec. Feed speeds: 4 + 8 m/min. Motor power grinding agregate: 11 kW, power adjustment: 0.55 kW, feed carpet: 1.3/1.8 kW Operating pressure: 6 bar, Air requirement: 10 l/min., Suction nozzle: 1 x 150 + 1 x 120 mm WxDxH: 1800 x 2000 x 2100 mm, weight approx. 2400 kg Standard equipment: - Contact roller D=150 mm, hardness 90° Shore - Air sanding shoe with automatic insertion and removal - Rigid sanding shoe for solid wood frame sanding - Brush roller driven by the grinding unit - Automatic centering of the feed carpet - Extension carpet with high quality rubber circular hole carpet and auto. Carpet centering - Pneumatic sanding belt tension with length compensation - Non-contact abrasive belt oscillation, electronic - Low ...
Key data: 1100 mm, 1 , 150 mm
Combination grinding unit with contact roller and air grinding shoe Brush roller Abrasive belt tension, pneumatic motor strength adjustment Specifications: max. working width 1100 mm Max. workpiece thickness 150 mm Min. workpiece thickness 3 mm Sanding belt dimensions 1900 x 1120 mm Feed speed 5/10 m/min. Motor power grinding unit 15 kW Motor power height adjustment 0.50 kW Motor power feed carpet 0.5/1.0kW Operating pressure 6 bar Air pressure approx. 20 l/min Suction nozzle 2 x 200 mm Weight approx. 2100 kg Machine width approx. 1750 mm Cntaou7R Machine depth approx. 1700 mm Machine height approx. 1900 mm
Key data: 1300 mm, 4 , 150 mm
WIDE BELT GRINDING AND CALIBRATION MACHINE Technical details: Working width: 1300 mm Max. workpiece thickness: 150 - . 4.0 mm Sanding belt dimensions: Circumferential mm Machine dimensions LxWxH: 4.8 x 2.7 x 2.35 m Drive 219 kW Year of construction 1992/2004 For woodworking! Other features: - Pneumatic belt guide - Height adjustment by handwheel - EMERGENCY STOP switch - Grinding roller adjustment - Belt tensioner - Roller conveyors (infeed and outfeed per L: 2800 x W: 1700 mm with 6 rollers each) motor-driven - Control panel operation - Workpiece thickness min./max.: 4.0/150mm - Sanding belt belt width 1300 mm (belt circulation) - Sanding belt support lengthxwidth: 1700/1350 mm
Power connection 380V 7.3kW Extraction 1x120 mm 1x180 mm Grinding table 2850 x 1550 mm Sanding belt dimensions 7820 x 150 mm Table height adjustment via handwheel LxDxH: 4400 x 1700 x 1450 mm Weight approx. 1100 kg
grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm Control: Fanuc 310is total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Completely machanically overhauled with grinding process and setup of one part. Original photo taken on the EMO 2010. CNC control GE Fanuc 310is Hand panel for CNC control GE Fanuc Wenger loader optional Turned part with automatic indexing 1° Grinding head UR 1-2-3 Grinding wheel equipment left 500 x 80 mm Grinding wheel equipment right 400 x 63 mm Operating unit for one high-speed internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Coolant supply through the workpiece spindle Dressing unit on the upper table Swivelling holder for PCD diamond plates Basic module for KEL-TOUCH gate sensor and KEL-BALANCE balancing devices KEL-TOUCH lead sensor for universal grinding head va ...
grinding length: 4000 mm grinding width: 1100 mm workpiece height: 1100 mm total power requirement: kW weight of the machine ca.: 21 t dimensions of the machine ca.: m Modernisierte Präzisions-Flach-und Führungsbahnschleifmaschine aus Überholungsbetrieb. Geschliffen wurden unter anderem Betten für neue KERN Drehmaschinen. -Digitalanzeigen nachgerüstet -Umbau auf Kugelrollspindeln in der Querachse -Schleifspindel für Umfangsschliff -schwenkbare Schleifspindel für Untergriffe -Originalschabbild in der Längsachse -Elektrik erneuert -Aufspannfläche 4300 x 1500 mm Bei Nutzung einer Grube können wesentlich höhere Werkstücke geschliffen werden! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Grinding wheel dimensions (od x id x width): Ø 406 x Ø 203 x 200 mm, Ø min/max to be rectified: 1.5/100mm, Regulating wheel width: 200 mm, No. of regulating wheel speeds: infinite, Min/max speed of regulating wheel (r.p.m.): 0/450rpm, Control type (cnc/manual): Manual, Regulating wheel dimensions (od x id x width): Ø 270 x Ø 140 x 200 mm, Grinding wheel width: 200 mm, Plow (auto/manual): Automatic , Grinding wheel head motor power: 15 kW, Long: 2020 mm, Width: 1300 mm, Tall: 1420 mm, Weight: 4200 Kg
Grinding wheel dimensions (od x id x width): 325 x 175 x 125 mm, Ø min/max to be rectified: 1.5 / 50 mm, Regulating wheel width: 125 mm, Regulating wheel dimensions (od x id x width): 220 x 125 x 125 mm, Grinding wheel width: 125 mm, Grinding wheel head motor power: 7,5 Kw, Long: 1.520 mm, Width: 1.020 mm, Tall: 1.260 mm, Weight: 1.600 Kg
Distance between points: 500 mm, Height of points: 100 mm, Ø of the grinding wheel: 300 mm, Normal grinding wheel width: 25 mm, Maximum usable width of the grinding wheel: 50 mm, Grinding wheel hole: 127 mm, Workpiece holder head: 75-110-150-220-275-375-550-750 rpm, Tilt table in degrees: 8º, Hydraulic table speed: 0.10/6 m/min, Automatic fast forward: 20 mm, Advance in depth: 0.10 to 1 mm, Plongee feed rate: 0.10-5 mm/min, Fine-tuning time regulation in seconds: 60s, Workpiece holder head motor: 2 speeds: 0.38/0.55 HP, Motor head for grinding wheels: 3 CV, Hydraulic pump motor: 0.5 HP, Cooling pump motor: 0.10 HP, Internal grinding apparatus: 0.75 HP, Points: Morse 4 and 3, Weight approx.: 1600 Kg
Grinding wheel dimensions (od x id x width): Ø 406 x Ø 203 x 200 mm, Ø min/max to be rectified: 1.5/100mm, Regulating wheel width: 200 mm, No. of regulating wheel speeds: infinite, Min/max speed of regulating wheel (r.p.m.): 0/450rpm, Regulating wheel dimensions (od x id x width): Ø 270 x Ø 140 x 200 mm, Grinding wheel width: 200 mm, Plow (auto/manual): Automatic, Maximum length to be rectified in plongeé: 200 mm, Grinding wheel head motor power: 15 kW, Long: 2020 mm, Width: 1300 mm, Tall: 1420 mm, Weight: 4200 Kg
Universal Radius Metal Belt Sanding Machine Specifications: - Sanding belt dimensions 2000 x 75 mm - Surface grinding opening 400 x 75 mm - Support vise – angle adjustable 90° - 30° - Support fine adjustment via handwheels - Sanding belt speed 30 m/sec. - Working height 960 mm - Various sanding rollers Ø 25 , 30 , 39 , 45 , 57 mm - Drive 400 V / 2880 rpm / 3 kW - Space requirement approx. W 700 x H approx. 1200 x D 1200 mm - Weight approx. 125 kg
Surface Grinding Machine JONES & SHIPMAN 540 LAR, capacity 450x150 mm, magnetic plate. Automatic cycle, Max working dimensions: 450x170 mm, Longitudinal travel x axis: 470 mm, Cross travel y axis: 171 mm, Clearance between worktable and spindle axis: 502 mm, Feed rate x axis: 2-25 m/1, Feed rate y axes: 0 - 1 m/1, Wheel speed: 0 - 2640 rpm, Wheel dimension: 200x20x31,75 mm, Spindle motor power: 1,5 Kw, Weight: 1.000 Kg, Accessories: Magnetic plate, Auto cycle, Power rise and fall, DRO
Surface Grinding Machine JONES & SHIPMAN 540 X, capacity 450x150 mm, magnetic plate, dust extractor, OPTIDRESS E Factstor 2, Max working dimensions: 450x170 mm, Longitudinal travel x axis: 470 mm, Cross travel y axis: 171 mm, Clearance between worktable and spindle axis: 502 mm, Feed rate x axis: 2-25 m/1, Feed rate y axes: 0 - 1 m/1, Wheel speed: 2640 rpm, Wheel dimension: 200x20x31,75 mm, Spindle motor power: 1,5 Kw, Weight: 1.200 Kg, Accessories: Coolant tank, dust extractor, magnetic plate, OPTIDRESS E Factstor 2
Surface Grinding Machine FAVRETTO MC130, 1300x700 mm, magnetic plate, sistem Digit Plus FAVRETTO, Information about technical data are not binding., Machine available subject to prior sale., Max working dimensions: 1500x750 mm, Working table size: 1300x500 mm, Longitudinal travel x axis: 1640mm, Cross travel y axis: 650 mm, Clearance between worktable and spindle axis: 850 mm, Feed rate x axis: 1 - 40 m/1, Feed rate y axes: 0 - 2000 m m/1, Wheel speed: Stepless by Variable speed drive AC, Wheel dimension: 400x152,4x100 mm, Spindle motor power: 15Kw, Nc: Digit FAVRETTO, Weight: 8.000 Kg, Accessories: Electro permanent magnetic plate 1300x500 mm, coolant tank with paper filter
Wide belt sanding machine for wood, veneer and varnish Ernst LBK 1300 Grinding width: 1300mm Transverse grinding unit Longitudinal grinding unit
Wide belt grinding machine OTT RS-O Grinding width: 1300mm Calibration roller + fine sanding + cleaning brush
Wide belt grinding machine Boere Elite 1300 BK Grinding width max. 1300mm Grinding calibration roller from below
(3) Mikrosa SASL 5 CNC (size similar to Kronos M, MX, L) CNC overhaul and retrofit in progress full overhaul and CNC retrofit (pending) komplett Ueberholung + CNC retrofit Grinding wheel 500mm wide x 610mm dia. CNC 5 axis / 5 axis Mikrosa SASL 5 CNC photos of the last finished machine, for reference only complete overhaul and retrofit Grinding wheel 500 x 610 mm Regulating wheel 400 x 650mm Fixed center Complete mechanical overhaul Complete electrical overhaul Elimination of hydraulic movements Application CNC Siemens 840D 5 axes controlled in position with digital brushless motors: - Operating wheel axis motor with optical scale - 4 dressing axes: 2 on the grinding wheel, 2 on the regulating wheel - rotating axis with adjustable speed motor on regulating wheel - rotating axis with 55kW AC motor with inverter on grinding wheel to adjust RPM / peripheral speed (m/sec) Set-up for through-f ...
Manufacturer: ALPA Model : RT 2100 Type of machine : surface grinding machine Year of manufacture : 1997 - Max workpiece width: 600 mm - Max workpiece length: 2100 mm - Magnetic table: 2000 x 400 mm Equipped with: - Wheel dresser - Electronic control unit Mod. MT 2000/R - Electrospindle for conical grinding - Electronic plate from Tecnomagnete - Coolant tank Find more here - .ucymachines/ Contact us at - sales@ucymachines
Manufacturer : MININI Model : PL 65-10 Year of manufacture : 2005 Type of machine : Surface grinding machine - Max width: 600 mm - Max length: 1000 mm Equipped with: - Electronic magnetic table 1000 x 600 - Fume extractor - Coolant tank Find more here - .ucymachines/ Contact us at - sales@ucymachines
Machine Type: Center Grinding Machine Manufacturer: Henninger Model: ZS 200 Year: Not specified - Max Workpiece Length: up to 2000 mm - Workpiece Diameter: 285 - 325 mm - Center Diameter: 2 - 110 mm - Bore Taper: 50 - 120 mm - Center Height: 165 mm - Wheel Diameter: 10 - 60 mm - Grinding Wheel Speed: 9150 - 18300 RPM - Power: 0.4 kW - Weight: 0.5 tons Equipped with: - Pneumatic centering device
maximum number of results exceeded
please refine your search
