tool cutter grinder used for sale

Cutting capacity: Has a cutting width of 10-430 mm and a cutting height of 10-300 mm. Design: Equipped with a blade with 4 cutting edges. Weight: The block cutter weighs 66 kg. Auction-ID: A1-40898-262

Rated Input Voltage: 1P AC220V ±15% 50/60Hz Rated input current: 25A Rated input power: 5.5 KVA Open circuit voltage: 243V Output Current Setting: 20-40A Rated output voltage: 96V Cyclic Duration Factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Arc discharge by contact Weight: 6.9 kg Dimensions: 375X155X300 Auction-ID: A1-40898-1008

S. No.: 011001 Equipment / Additional information: Untrimmed Book Size: Max. Spine Length 350 x Fore-edge Length 320 mm Limitation: The maximum length from the center to top or bottom is 175 mm Min. Spine Length 148 x Fore-edge Length 105 mm Limitation: The minimum length from the center to top or bottom is 74 mm Finished Book Size: Max. Spine Length 340 x Fore-edge Length 300 mm Limitation: The maximum length from the center to top or bottom is 170 mm Min. Spine Length 145 x Fore-edge Length 101.6 mm Limitation: The minimum length from the center to top or bottom is 72.5 mm Trim Width: Fore-edge: Max. 110 mm / Min. 1 mm Top and bottom: Max. 80 mm / Min. 1 mm Trim Height: 1 to 65 mm Book Weight: Transport Speed Level 7: 2.8 kg or less Transport Speed Level 6: 4.0 kg or less Transport Speed Level 5: 5.2 kg or less Height of Entrance Section Pusher: 56 mm Clamp  ...

Set of 6 face milling cutters with ISO 50 cutter holders and carbide inserts. Cutters suitable for surfacing and machining operations. ISO 50 conical cutter holders Equipped with carbide inserts. Auction-ID: A1-49938-23

Professional STOW CS8CE20H20 concrete/floor saw, year of construction 2011, serial number ZE0306510. Equipped with a Honda GX620 V-Twin petrol engine with an output of 14.9 kW and a nominal speed of 3,600 rpm. Own weight approximately 173 kg. Mobile version, suitable for sawing concrete, asphalt and other paving materials. Machine is currently not working and is offered in non-working condition, for recovery or parts. Used condition with visible signs of wear and rust; See photos. Auction-ID: A3-46125-22070

Technical data Manufacturer: GRAULE Machine type: Notching cutter Version: Stationary machine with base cabinet Configuration Manually adjustable milling carriage Work table with stop and guide system Pneumatic workpiece clamping device Transparent protective screen Handwheels for positioning Electric motor with start/stop operation Remarks Type, year of manufacture and other technical data are not recognizable. Auction-ID: A7-50403-50

Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool for: closing folds -Recording: 25 mm -Drawing: in the photos -Dimension: 40 x 130 mm -Length: 495 mm -Weight: 12.5 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool for: closing folds -Thickness: 25/18 mm -Total length: 138 mm -Total height: 70 mm -Weight: 4 kg

Bending tool, die, upper blade, upper tool, straightening tool -Tool for: Press brake -Tool for: closing folds -Thickness: 25 mm -Total length: 470 mm -Overall height: 195 mm -Weight: 18 kg

Lista Drawer Cabinet with Milling Tool Lista Drawer Cabinet Number of drawers: 13 Pull-out type: Full extension Very high load-bearing capacity due to precise and stable construction made of high-quality, welded sheet steel Body colour: Reseda green, RAL 6011 Load capacity per drawer: 200 kg External dimensions W x D x H: 870 x 725 x 1450 mm Content: Metal Circular Saw Blades Cross-toothed and coupled disc milling cutters Cross-toothed disc milling cutter Angle semi-circular cutter Dovetail cutter Semi-circular milling cutter Thread milling cutters More items - new and used - can be found in our shop! International shipping costs on request!

Auction-ID: A1-48648-85

Operation not tested Auction-ID: A1-40314-65

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 33064 Year of construction approx. 1960 Overhauled in 2012Travel distances X: 300 mm Y: 150 mm Z: 330 mmTable size 600 x 210 mmSpindle holder MK 4 - S20 x 2Spindle speed vertical 95-1900 rpm. 12 stepsSpindle speed horizontal 60-1200 rpm. 12 stepsMotor power 1.1 and 1.4 kWNerg connection 380 volts, 50 Hz- Feed in the X and Y axis- Pinol displacement on the vertical milling head- Fixed angle table- Coolant device with mechanical pump in the machine foot-

Driven tool, Driven tool holder for CNC lathe BIGLIAfits 100% on a B 501 YHerder OESTERLE PartnerArt. 310 5521 E32 B109 Year: ca. 2010Serial No. 06 - 12 / 0330Collet holder: ER32- with a collet 18 mmWeight: 7.5 kgvery good conditionsimilar to M.T. ITALY; used

PCB - Tool Master 10 Offer details Stock number 1039-9487 Machine Type Tool Presetter Manufacturer PCB Type Tool Master 10 Year of construction 2009 Country of origin Switzerland Additional information Tool presetter PCB - Tool Master 10 - Incl. TC100 measuring electronic Technical details X-axis measuring range 0 - 160 mm Measuring range Z-axis 0 - 300 mm Mounting SK 40 / BT 40 Resolution 0.001 mm Ambient temperature 0 - 45 °C Space requirement approx. 0.60 x 0.50 x 0.85 m Weight approx. 60 kg Auction-ID: A7-49608-27

For the benefit of Daewoo Puma 200MC Machining Center. Includes 8-Piece Hagro Tool Drawer Cabinet with collet set, drills, tools, accessories, accessories, etc. Dimension approx. L105 x W80 x H115 cm. Auction-ID: A1-49846-9

For the benefit of Leadwell V30i Machining Center. Includes 2 x 8-Piece Hagro Tool Drawer Cabinet with drills, tools, accessories, accessories, etc. Dimension approx. L165 x W80 x H110 cm. Auction-ID: A1-49846-7

With its 261-piece range of tools, the Heavy Duty XXL Tool Trolley Premium Edition offers extensive equipment for the workshop, garage, assembly, maintenance and repair. The numerous tools from different areas are clearly arranged in precisely fitting drawer inserts and are therefore quickly at hand at all times. The fixed tool arrangement ensures clear organization and at the same time makes it easier to check for completeness. Each tool has its designated place so that missing tools can be quickly identified. For additional ease of use, the tool trolley is equipped with soft-close drawers. These close in a controlled and comfortable manner. The sturdy wooden worktop on the top offers additional storage and work space for tools, components and minor assembly work. Thanks to its robust construction, the side push handle and the mobile design, the tool trolley can be used flexibly a ...

CAT tool trolley in black and yellow with 7 ball-bearing drawers, 5 of which are equipped with tools. Suitable for workshops, industry, service vehicles and ambitious do-it-yourselfers. The robust sheet steel construction with resistant powder coating is designed for daily use. A central locking system protects the contents. Four heavy-duty castors, two of which have parking brakes, as well as an ergonomic push handle enable safe and mobile use. The textured worktop provides additional storage and work space. The tooling includes 1/4\" and 1/2\" ratchets, sockets from 4 to 27 mm, extensions, cardan joints and Torx bits. The tools are clearly arranged in precisely fitting inserts and are quickly at hand. The goods can be shipped at an additional cost. Auction-ID: A1-49898-8

For sale are 2 solid tool or adapter clamping plates made of tool steel, which were used on an ENGEL duo 600 injection moulding machine. The plates were used to hold and fasten injection moulds and are accordingly designed for industrial use in injection moulding as well as in tool, mould, machine and fixture construction. Technical data / scope of delivery: Quantity: 2 pieces Origin: ENGEL duo 600 injection moulding machine Material: solid tool steel Centering: Ø 200 mm Dimensions: approx. 800 × 650 × 120 mm per panel Total weight: approx. 800 kg Various existing fastening, mounting and threaded holes Sold exclusively as a complete set of 2 clamping plates Due to their solid design and existing machining, the plates are particularly interesting for further use as tool/adapter clamping plates, but also for individual applications in tool, mold, machine and fixture construction. ...

Auction-ID: A1-49836-64

Construction: One-piece cast iron frame Table: Width: 1,200 mm Depth: 800 mm Shaft : Diameter: 50 mm Rotational speeds: 3,000 / 4,500 / 6,000 / 9,000 rpm Equipment: Swivel micrometric guide Shaft clearance under the table Foot brake Shaft locking at the foot Dimensions (estimate): approx. 1,900 × 1,250 × 1,250 mm (to be confirmed) Weight (estimate): approx. 820 kg (to be confirmed) Auction-ID: A1-50215-46

Tool trolley AND tool case. Trolley with 7 drawers, 5 of which are filled with tools. And for portable, robust tool case incl. 86 pcs tools. Auction-ID: A1-40314-52

7 drawers, 260-piece set, all essential hand tools directly within reach, incl 2 keys Auction-ID: A1-40314-99

Tool trolley, 4 trays incl 238 pcs tools, combination locks Auction-ID: A1-40314-124

Capacity per drawer: 200 kg/ 10 drawers/ equipped with touchscreen type TM326, hand scanner and keyboard/ manual Dutch and English available/ front height drawers: 8 drawers with front height 75 mm, 1 drawer with front height 100 mm, 1 drawer with front height 200 mm/ total size cabinet: 1050 x 750 x 1000 mm Auction-ID: A1-49785-3

Auction-ID: A1-40898-406

Auction-ID: A1-40898-249

29076 Tool trolley 211 pcs (10 year warranty) Tool trolley 211 pieces, aluminum case with corner reinforcement with 2 wheels and extendable telescopic handle. Tool subdivision into 4 compartments. Contents 210 pieces most common hand tools. Auction-ID: A1-40898-288

Auction-ID: A1-40898-216

Auction-ID: A7-50403-111

Object Mobile tool and workshop trolley with tubular steel frame, two wooden shelves and castors. Used version with signs of wear due to age and use. Contents - Various tool holders with milling and cutting tools - Clamping and fixture technology - Machine vise - Clamping device set in wooden box, partly AMF marked - Various clamping claws, clamping screws and support elements Auction-ID: A7-50403-194

Object Mobile tool and work trolley from LISTA Sheet steel construction with worktop made of wood-based material Version with rollers, push handles, open storage areas Contents - Extensive stock of tool holders (36 pieces) and chucks (including Hahn & Kolb) - Drill chuck and collet chuck - Milling and drilling tools - Tool holders , some with inserted tools Note The items come from a plant closure and were actively used in production until the end. Auction-ID: A7-50403-25

Hartner Multi-Step Drills Precision reimagined. Efficiency made tangible. Made in Germany. The multi-step drills are the intelligent further development of classic HSS and HSS-E twist drills. Thanks to their innovative step-drill geometry, the drills deliver significantly higher performance, greater precision, and noticeably improved drilling comfort in daily use. What makes the multi-step drill so special? Unlike conventional HSS drills that machine material in a single cutting action, the multi-step drill works in several defined cutting stages. The result is smooth, low-vibration operation with significantly lower force requirements. Additional advantages include optimal chip removal, perfectly round and precise holes, and almost burr-free hole exits. Even when used with hand drills and cordless drills, the special geometry enables controlled drilling without jamming or slipping in t ...

Arntz Blue Line saw blade Length: 5800 mm Specification: 41 x 1.3 mm 2/3 K Carbide band saw blades with pre-cutting and post-cutting geometry for machining non-ferrous metals and graphite. The specialist for: - Aluminium alloys - Aluminium bronzes - Copper alloys - Sand-cast aluminium and magnesium castings - Graphite

Grinding body dimension: 200 x 40 x 76 mm Circumference speed: 30 m / sec Follow-up value: 0.7 kW Weight: approx. 250 kg Specification: Double grinding bracket with integrated suction

Tool cabinet for bending tools pull-out drawers, allows the two-sided access to the tools -any adjustment of the inserting roofs -robust steel construction, powder-coated, in any colors of the RAL pallet -side fork guide rails for transport by means of forklifts (cavity under the cabinet) -the drawers run on roller slide rails (serve as additional stabilization) . number of drawers: 4 squares - Mass of a drawer : - total height 1200mm / total width 850mm / total depth 1050mm - mass of the faeces set in a drawer: compartment heahe on 210mm (is varriabel) technical height can be used in total without intermediate boeden 990mm compartment width usable 130mm depth usable 980mm - number of intermediate boeden: 3 stubs ; ready for use

Tool cabinet for bending tools Suitable for WILA/TRUMPF Tools or type B L / W / H: 1180 mm x W 850 mm / H 1200mm, 350kg -extendable drawers, allows the two-sided access to the tools -arbitrary adjustment of the inserting roofs -robust steel construction, powder-coated -side fork guide rails for transport by means of forklifts (cavity under the cabinet) run drawers Roller slide rails (serve as additional stabilization) - the cabinet can be disassembled - number of drawers: 4 sets - Mass of a drawer : - total height 1200mm / total width 850mm / total depth 1180mm - Mass of the Fa echer in a drawer: compartment hoehe set to 210mm (is varriabel) technical height total usable without intermediate boeden 990mm - specialist width usable 130mm depth usable 1100mm - Number of intermediate boeden: 4 Stueck / completely continuous; new ready for use

universal tool sanding machine manufacturer fa Kellenberger (Strausak) the machine is geometrical and also funktionmig in a very good state. Spitzenh?he: 125 mms top width: 680 mms L?ngsbewegung: 500 mms Arbeitsfl?che of the table: 1030 x 214 mms Q?rzustellung: 280 mms mm H?henverstellung Schleifkopf:300 wheel area Schleiftisch: + 90 °/-45 ° wheel area Schleifkopf: 350 ° Horizontally wheel area Schleifkopf: 360 ° Vertically Schleifspindel 4 speeds: 2250-3000-4500-6000 revos Schleifscheibendurchme?er: 250 mms Antriebsleistung:Schleifsp .: 1.5 kW Sony 2-axes digital display 0,001 mms

Tool cabinet for bending tools / exhibition object suitable for AMADA/PROMECAM or type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg - for AMADA/Promecam tools -extendable drawers, allows double-sided access to the tools -any adjustment of the inserting roofs -robust steel construction, powder-coated -side fork rails for transport by forklift (cavity under the cabinet) -the drawers run on roller slide rails ( serve as additional stabilization) -the cabinet can be disassembled - Number of drawers: 4 squares - Mass of a drawer : - Total height 1200mm / Total width 850mm / Total depth 1050mm - Mass of the faeces in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Fachhoehe total usable without intermediate boeden 990mm - Fachbreite usable 130mm - Technical depth usable 980mm - Number of intermediate boeden: 3 stueck

Tool cabinet for press brake Good for AMADA / PROMECAM or Type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allowing access from both sides of the tools -any height adjustment of shelves -sturdy steel construction Fork-lateral guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) , the cabinet can be broken - Number of drawers: 4 pieces - Dimensions of a drawer: - 1200mm Overall height / Overall width 850mm / 1050mm Overall depth - Dimensions of the compartments in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Total compartment height 990mm shelves available ohnen - Usable shelf width 130mm - Usable shelf depth 980mm - Number of shelves: 3 piece

Tool cabinet for bending tools suitable for AMADA/PROMECAM or type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allows the two-sided access to the tools -any adjustment of the inserting -robust steel construction, powder-coated -side fork guide rails for transport by means of forklifts (cavity under the cabinet) -the drawers run on roller slide rails (serve as additional stabilization) Cabinet can be disassembled - Number of drawers: 4 squares - Mass of a drawer : - Total height 1200mm / Total width 850mm / Total depth 1050mm - Mass of the faeces in a drawer: compartment hhoehe set to 210mm (is varriabel) - Fachhoehe total usable without intermediate boeden 990mm - Tray width usable 130mm - Depth usable 980mm - Number of intermediate boeden: 3 stueck

Accessories fur WU 3 ms, apparatus of part of, round loop facility, etc. More info on request

Tool cabinet for press brake Good for AMADA / PROMECAM or Type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allowing access from both sides of the tools -any height adjustment of shelves -sturdy steel construction Fork-lateral guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) , the cabinet can be broken - Number of drawers: 4 pieces - Dimensions of a drawer: - 1200mm Overall height / Overall width 850mm / 1050mm Overall depth - Dimensions of the compartments in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Total compartment height 990mm shelves available ohnen - Usable shelf width 130mm - Usable shelf depth 980mm - Number of shelves: 3 piece

Labeling Division m/m lettering / Stamped no. Slope 25 1:3 4x3 9006 4.3.74 41a 7 8x8x8x8 40 6 3 401 5 m/m 44 3:1 3x4 1235 51 3:1 4x4 Viereckloch / Nr. 38449 42 2x8 Kunststoffkamm / USA 41 2x7 Kunststoffkamm 20 3:1 3.5x4.5

Complete wheel sets for the production and subsequent sharpening of HSS and carbide tools. Single diamond and CBN discs. for the manufacturing and Resharpening. Grinding wheel shots short and long run. Spacer discs for grinding wheel flanges.

Table clamping surface: 630 ø mm traverse path x: 600 mm traverse path y: 450 mm traverse path z: 500 mm Quill stroke: hand 80 mm spindle retainer: ISO 40 spindle speeds: 20-3150 rpm stufenl feeds. adjustable: 1-3000 mm / min rapid traverse rate: 4 m / min. Connection: 380V kW space: 2000 + 850 x 2000 x 2000 mm weight: 3300 kg

Control cabinet for roller conveyor used from stock All prices are from Station World and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire process of dismantling and loading as well as transport is carried out at the buyer's own expense and at the buyer's own ...