tool and cutter used for sale

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 33064 Year of construction approx. 1960 Overhauled in 2012Travel distances X: 300 mm Y: 150 mm Z: 330 mmTable size 600 x 210 mmSpindle holder MK 4 - S20 x 2Spindle speed vertical 95-1900 rpm. 12 stepsSpindle speed horizontal 60-1200 rpm. 12 stepsMotor power 1.1 and 1.4 kWNerg connection 380 volts, 50 Hz- Feed in the X and Y axis- Pinol displacement on the vertical milling head- Fixed angle table- Coolant device with mechanical pump in the machine foot-

Driven tool, Driven tool holder for CNC lathe BIGLIAfits 100% on a B 501 YHerder OESTERLE PartnerArt. 310 5521 E32 B109 Year: ca. 2010Serial No. 06 - 12 / 0330Collet holder: ER32- with a collet 18 mmWeight: 7.5 kgvery good conditionsimilar to M.T. ITALY; used

Dividing head, spiral milling device, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder -Manufacturer: Stankoimport, dividing head/tool holder for tool grinding machine -Type: 36642.M1 -Parting head: rotatable/tiltable -Mounting/Dimensions: MK5 see photos -Dimensions: 300/270/H180 mm -Weight: 21.6 kg

Equipped with 7 drawers, dimensions: 95x76x50cm (hxwxd) Auction-ID: A1-45411-104

Tool cabinet with contents: caliper, measuring bracket up to 50 mm, measuring bracket over 50 mm, internal probe 5-50 mm, internal three-point Auction-ID: A7-45768-61

Hartner Multi-Step Drills Precision reimagined. Efficiency made tangible. Made in Germany. The multi-step drills are the intelligent further development of classic HSS and HSS-E twist drills. Thanks to their innovative step-drill geometry, the drills deliver significantly higher performance, greater precision, and noticeably improved drilling comfort in daily use. What makes the multi-step drill so special? Unlike conventional HSS drills that machine material in a single cutting action, the multi-step drill works in several defined cutting stages. The result is smooth, low-vibration operation with significantly lower force requirements. Additional advantages include optimal chip removal, perfectly round and precise holes, and almost burr-free hole exits. Even when used with hand drills and cordless drills, the special geometry enables controlled drilling without jamming or slipping in t ...

Universal grinding machine from Denius, manufactured in 's-Hertogenbosch (NL). Robust machine for the precise sharpening of various cutting tools: milling cutters, drills, reamers, turning tools, etc. Model on a heavy cast iron frame, equipped with a powerful motor and a table adjustable in several axes. Features: Brand: Denius Type: Universal Tool Sharpener Origin: Netherlands Power supply: Three phase (400 V) Cross table with micrometer adjustments Swivel tool holder Upper motor driving the grinding wheel Stable cast iron frame, ideal for precision work Estimated weight: approx. 250–350 kg

SPECIFICATIONS: Machining max mm: 330 Ø mm: 40 Computer-aided measuring and displaying system for Measurement of tools, digital display of tool data Input of profile dimensions, calculation of spindle setting data Transfer to the machine by means of a label

Auction-ID: A1-45424-104

Auction-ID: A1-45188-259

Auction-ID: A1-45411-121

1. Disk Spring 2093F Ø80 x Ø36 x 4 mm - 5,400 pcs 2. Clamping Tool Large - 6 pcs For OD: 28 inch (711.2 mm) to 64 inch (1625.6 mm) Includes: Clamping Adapter Large; Cylinder Revolving Connector; Pants Rotating Coupling (3 m); Pneumatic Foot Pump XA12G

Welding machine |AND a tool case Rated Input Voltage 220 Frequency Hz: 50/60 Rated Input Capacity Kw: 7.5 Rated Input current A: 42 Duty cycle 40C 10 min AND Tool case incl 144 pcs tools

Content:

Consisting of clamping devices and tool holders in various sizes and designs, some with tools

Various milling cutters; tool holders; various reamers; drilling; including plastic crates; without pallet box;

With foot control including various molds, tooling and documentation

Welding machine |AND a tool case Rated Input Voltage 220 Frequency Hz: 50/60 Rated Input Capacity Kw: 7.5 Rated Input current A: 42 Duty cycle 40C 10 min AND Tool case incl 144 pcs tools

Range consists of 2 x Hydraulic Pump, 1 x Unitest Testing Device, 1 x Ultrasonic Flowmeter Fluxus F601, 1 x Electric Screwdriver

Range consists of chain hoists, 1x universal electric scissors, GEDORE torque wrench, 1 x Mentor Visual IQ, including a lattice box.

Included: Pallet

included: lattice box.

Contents: heating mat, outer jacket cutter set, Bastechnic external/internal puller set, label printer, Testo measuring device, among others

Univ. swivel, tilt and turn table presumably DECKELUniversal tool milling machine attachment tableTable size: 700 x 400 mmGroove width: 14 mmGroove spacing: 46 mmMounting plate: width 550 mm x height 300/240 mm- Swivel and tiltable +/- 30- Rotatable 360Weight approx. 140 kg; used

Univ. swivel, tilt and turn tableAttachment table for Univ. tool barrel machineTable size 630 x 250 mmGroove width 14 mmRotatable and tiltable +/- 30Swivel +/-45- 4x T-grooveWeight approx. 120 kg; used

Univ. Swivel, Tilt and Turn Table DECKELUniversal Tool Milling Machine Attachment Table suitable for FP 2L or FP 3L or FP 4LNr. 2314-0301 Year of construction: approx. 1975Clamping surface: 1000 x 520 mm- 6 clamping grooves 16 mm, distance 90 mm- Clamping plate can be rotated horizontally to the right and left up to 45 degrees- Tiltable from/to the machine +/- 15 degrees- Swivel +/- 15 degrees- Swivel table, tilting table, angle tablePermissible load max. 1000kgWeight: 400kggood condition; used

Universal face and boring head LENZ type LPA 1SSpindle tool, spindle head similar to WOHLHAUPTER UPA3Tool holder: SK 40 - M16Adjustment accuracy: 0.01 mm- Accessories as shown- Storage boxWeight: approx. 5 kggood condition; used

weight: 100 kg : 2 Stück height: 700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

quantity: 1 Koffer : . The technical data is provided by the manufacturer or operator and is therefore not binding for us. We reserve the right to prior sale, our terms and conditions of business and sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, crane capacity 70 t More than 10,000 items Accessories for your workshop If you want to sell machines, production lines, or your business, then talk to us. You can find more offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For measuring polygons with an odd number of sides. The technical data is provided by the manufacturer or operator and is therefore not binding for us. We reserve the right to prior sale, our terms and conditions of business and sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, crane capacity 70 t More than 10,000 items of accessories for your workshop If you want to sell machines, production lines, or your business, then get in touch with us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Spindle-to-table distance min./max.: 81mm/481mm, counter support spindle center distance: 195mm, spindle head swivel: 360°, milling spindle diameter: 70mm, spindle adjustment: 100mm, headstock adjustment: 300mm, table dimensions X/Y: 480mm/820mm, travel X/Y/Z: 500mm/200mm/400mm, max. workpiece length: 400mm, spindle speed: 1600rpm, feed X/Y: 500mm/min, feed Z: 250mm/min, spindle head swivel: +/-30°, machine dimensions X/Y/Z: approx. 1600mm/2550mm/1700mm, weight: approx. 2300kg. The machine was electrically tested at the end of 2025 and a defect of the emergency stop switch was discovered. Documentation available. On-site inspection is possible.

: mit Zubehör serial number: 71309 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

including: tool case without contents; soldering tools; in 4 plastic crates; without pallet; Auction-ID: A1-43992-246

Offered is a universal tool grinding machine: Speed: 2800rpm, grinding range: approx. 30-50mm diameter, grinding wheels: cup or dish wheels, weight: approx. 450-500kg, machine dimensions X/Y/Z: approx. 800mm/800mm/1500mm. Inspection possible by appointment.

Professional tool trolley with a 280 pcs set of tools. Max cart load 475 kg, max drawer load 35 kg. 7 drawers with centralized keylock. 5x drawers 525 x 395 x 90 mm. 2x drawers 525 x 395 x 132 mm. 1x side cabinet with keylock. 2x tilting wheels. 2x braking wheels. 1x cart handle. Shipping dimensions 830 x 520 x 870 mm - 86 kg. Assembled dimensions 758 x 456 x 967 mm - 77 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 830 x 520 x 870 mm; Approx. Weight: 86kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45363-456

Quantity: about 190 pieces Type: HSK63 Status: Opportunity Set including numerous HSK63 tool holders, ER collet chucks, cutter holders, face heads, boring heads, adapters, cones and various accessories, presence of mounted carbide cutters, different diameters and lengths, storage in wooden crates Auction-ID: A1-44765-54

CNC control: Heidenhain TNC 530 Machine 5 simultaneous axes Strokes: X = 730 mm, Y = 560 mm, Z = 560 mm Spindle speed: up to 12,000 rpm Cone: SK40 Feeds: 20 – 20,000 mm/min Fast feeds: 30 m/min Table: 1000 x 600 mm Max load table: 800 kg Tool changer: 24 / 30 positions Machine hours≈ 31,481 h Spindle hours≈ 25,087 h Lots sold as is, unchecked, without tools or tool holders. Auction-ID: A1-44765-203

Professional tool trolley with a 280 pcs set of tools. Max cart load 475 kg, max drawer load 35 kg. 7 drawers with centralized keylock. 5x drawers 525 x 395 x 90 mm. 2x drawers 525 x 395 x 132 mm. 1x side cabinet with keylock. 2x tilting wheels. 2x braking wheels. 1x cart handle. Shipping dimensions 830 x 520 x 870 mm - 86 kg. Assembled dimensions 758 x 456 x 967 mm - 77 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 830 x 520 x 870 mm; Approx. Weight: 86kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45363-457

CNC Control: Fanuc 0T-F (with C Axis) Diameter Above Bed: 500 mm Max Turning Diameter: ~280 mm Max Turning Length: ~500 mm Bar Capacity (Main Spindle): 65 mm Bench Design: 30° or 45° Inclined Spindle Nose: ASA 6\" Main Spindle Speed: Up to 4,000 RPM Sub-Spindle Speed: Up to 4,000 RPM C-Axis: 0.001°Turret : 12 stations Tooling type: VDI 40 Speed motorized tools: ~3,000 - 4,000 rpm Lots sold as is, unchecked, with tool and tool holder. Auction-ID: A1-44765-201

CNC lathe for turning and machining metal parts. CNC control: Fanuc 16 T AA Max. turning diameter: 165 mm Turning length: 100 – 340 mm Diameter above bed: 220 mm Main spindle speed: 50 – 5,000 rpm Main spindle power: 5.5 / 7.5 kW Main spindle bar passing: 65 mm Sub-spindle speed: 50 – 5,000 rpm Counter-spindle power: 3.7 / 5.5 kW Counter-spindle bar passage: 42 mm C-axis: 0.001° Turrets: 2 Tool positions: 2 × 16 Motorized tools: 2 × 16 positions Strokes: X 175 mm / Z 240 – 680 mm Total power: 41 kVA Dimensions (mm): 3,500 × 2,800 × 2,000 Weight (kg): 5,500 Serial No.: 1105-02957 Auction-ID: A1-44765-238

Manufacturer: INDEX Year: 2005 Type: Moving spindle CNC lathe with motorized tools and C-axis Numerical control: Siemens Sinumerik 840D Powerline Chuck: Ø 160 mm Max. rotation diameter: Ø 180 mm Strokes: X-axis 520 mm / Z-axis 200 mm Fast feeds: X/Z 40 / 30 m/min Moving spindle: 5,000 rpm – 13 kW (100%) / 20 kW (40% ED) – max. torque 105 Nm C-axis: 0.001° resolution Turret: 12 positions – all motorable stations – VDI 30 Motorized tools: up to 6,000 rpm – 8.5 kW Power supply: 400 V / 50 Hz / 3 phases – installed power approx. 25 kW Weight (kg): approx. 4500 Auction-ID: A1-44765-273

Professional tool trolley with a 280 pcs set of tools. Max cart load 475 kg, max drawer load 35 kg. 7 drawers with centralized keylock. 5x drawers 525 x 395 x 90 mm. 2x drawers 525 x 395 x 132 mm. 1x side cabinet with keylock. 2x tilting wheels. 2x braking wheels. 1x cart handle. Shipping dimensions 830 x 520 x 870 mm - 86 kg. Assembled dimensions 758 x 456 x 967 mm - 77 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 830 x 520 x 870 mm; Approx. Weight: 86kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45363-459

Professional tool trolley with a 280 pcs set of tools. Max cart load 475 kg, max drawer load 35 kg. 7 drawers with centralized keylock. 5x drawers 525 x 395 x 90 mm. 2x drawers 525 x 395 x 132 mm. 1x side cabinet with keylock. 2x tilting wheels. 2x braking wheels. 1x cart handle. Shipping dimensions 830 x 520 x 870 mm - 86 kg. Assembled dimensions 758 x 456 x 967 mm - 77 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 830 x 520 x 870 mm; Approx. Weight: 86kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45363-458

Manufacturer: DMG GILDEMEISTER Year: 2008 Type: CNC lathe with motorized tools with C and Y axes Numerical control: Heidenhain iT Plus Max. turning diameter: 400 mm Max. turning length: 600 mm Distance between tips: 615 mm Main spindle: 20–6,000 rpm – 16 kW – max. torque 155 Nm Bar capacity: Ø 52 mm – spindle bore 61 mm C-axis: 0.001° resolution Turret: 12 positions – 12 motorized tools (5,000 rpm, 3.7 kW) Strokes: X 160 mm / Z 450 mm / Y ±32 mm Fast feeds: X 60 m/min – Z 45 m/min Attachments: Chip conveyor, 12 bar HP coolant, workpiece catcher, fixed tool holders (5), motorized tool holders (3), hydraulic system Dimensions (mm): 8000 × 3000 × 2700 Weight (kg): approx. 4500 Remarks: Machine in good condition, powered on. Serial number included in the description. Auction-ID: A1-44765-212

Contents: 9 x Pfannenberg outlet filter, 4 x electronic assembly, Brand: Siemens, Model/Type: IIB-T2, 2 x Fans, 1 x Grease Pump- 15 L, 2 x First aid kits, among others. Auction-ID: A1-45495-371

Range consists of chain hoists, 1x universal electric scissors, GEDORE torque wrench, 1 x Mentor Visual IQ, including a lattice box. Auction-ID: A1-45495-269

Included: Pallet Auction-ID: A1-45495-392

included: lattice box. Auction-ID: A1-45495-286

included: lattice box. Auction-ID: A1-45495-284