ton press used for sale

Joos HP 90 Hydraulic veneer press with electric combi heating plates For sale is a well-maintained veneer press with the following data: -Pressing area 2.55m x 1.35m -Height of the pressing room 0.4m -Operating pressure 355 bar -Basic dimensions 2.98m x 1.53m x 2.1m

Key data: 600 t, 550 mm

RÖCHER hydraulic press from the site.

High-pressure industrial piston compressor, mounted on a chassis and equipped with an electrical control cabinet. Manufacturer: Neuenhauser Kompressorenbau GmbH – NK Type: 40.2.3.02.01.10.63 Year of manufacture: 2020 Serial Number: 27/20 Effective flow rate (f.o.d.): 30 m³/h Operating pressure: 60 bar Compressor speed: 1,500 rpm Power Requirement: 13 kW Electric motor: LAMMERS, three-phase, 15 kW at 50 Hz Motor speed: 1,470 rpm at 50 Hz Motor connection: 400 V Δ / 690 V Y – 50 Hz Motor protection rating: IP55 Efficiency class: IE3 Indicated engine weight: 160 kg Visible equipment: control cabinet with Siemens LOGO! TDE, main disconnect switch, selectors and reset button Marking: CE – Made in Germany Auction-ID: A1-51172-27

High-pressure industrial piston compressor, mounted on a chassis and equipped with an electrical control cabinet. Manufacturer: Neuenhauser Kompressorenbau GmbH – NK Type: 40.2.3.02.01.10.63 Year of manufacture: 2020 Serial Number: 28/20 Effective flow rate (f.o.d.): 30 m³/h Operating pressure: 60 bar Speed: 1,500 RPM Power Requirement: 13 kW Visible equipment: electric motor, cooler, pressure gauge and control cabinet with Siemens display Marking: CE – Made in Germany Auction-ID: A1-51172-26

Code: 0412 Brand: ORMAMACCHINE Model: NPC/R 35/13 - CE Standard Hydraulic hot press for joinery, furniture, bespoke furnishings, veneering, panels, doors, wooden joinery, composite materials and miscellaneous items – CE Standard Sturdy construction Solid perforated steel platens 3500 x 1300 mm Fixed lower plate – Movable upper plate Plate thickness 80 mm 6 pistons diameter mm 85 Total thrust 120 ton Option for either oil or steam heating Installed power 8 Kw Overall dimensions mm 4500 x 1550 x 2700 h Weight kg 10000

Pistol grip with 30 cm rubber hose with grease fitting Foot lever Steel drum cover Steel bucket with 6 liter capacity 180 cm high-pressure rubber hose Auction-ID: A7-50799-149

Used Comark C9557 pressure gauges Runs on 9V battery Auction-ID: A1-50936-222

Used Druck DPI 705 Digital Pressure Gauges/Indicators Battery operated Auction-ID: A1-50936-223

Pneumatic spray gun to be used in combination with a paint tank. Auction-ID: A7-50799-425

The electronic digital tire pressure gauge is a modern device that allows you to quickly and accurately check your car's tire pressure. Auction-ID: A7-50799-239

Pressure 20 bar, max flow rate 360 l/h, never used Overall dimensions: 300 x 300 x 700 mm Weight: 10 kg Auction-ID: A7-50798-316

The electronic digital tire pressure gauge is a modern device that allows you to quickly and accurately check your car's tire pressure. Auction-ID: A7-50799-139

Pistol grip with 30 cm rubber hose with grease fitting Foot lever Steel drum cover Steel bucket with 6 liter capacity 180 cm high-pressure rubber hose Auction-ID: A7-50799-49

Hydraulic press for climping hydraulic pipes, equipped with all the necessary dies for pipes from 0.5 to 50 mm, never used 0 hours and packed in a wooden crate Overall dimensions: 1000 x 1000 x 1200 mm Weight: 310 kg Auction-ID: A7-50799-110

Batch of used clock gauge/pressure gauges Auction-ID: A1-50936-255

Batch of high-quality stainless steel pressure hoses with ball valve Auction-ID: A1-50936-54

Pressure 20 bar, max flow rate 360 l/h, never used Overall dimensions: 300 x 300 x 700 mm Weight: 10 kg Auction-ID: A7-50799-355

Pistol grip with 30 cm rubber hose with grease fitting Foot lever Steel drum cover Steel bucket with 6 liter capacity 180 cm high-pressure rubber hose Auction-ID: A7-50799-249

An air dryer with filter and regulator, equipped with a standard 1/4\" air inlet connection. The device is designed to purify the incoming air from most liquid and solid particles. It is equipped with a pressure regulator that allows precise adjustment of the outlet air pressure, from 0 to 150 PSI. Auction-ID: A7-50799-162

Used Druck DPI 705E digital pressure gauges/ indicators Battery operated Auction-ID: A1-50936-221

An air dryer with filter and regulator, equipped with a standard 1/4\" air inlet connection. The device is designed to purify the incoming air from most liquid and solid particles. It is equipped with a pressure regulator that allows precise adjustment of the outlet air pressure, from 0 to 150 PSI. Auction-ID: A7-50799-262

MKS 600 Series Pressure Controller (10 Torr) Type 252 Exhaust Valve Controller Type 152 Automatic Pressure Controller Baratron 390HA-00100SP12 (100 Torr) Valves & Actuators Tags HP Lamination Auction-ID: A1-51157-19

Capacity 4 ton, manual, never used Overall dimensions: 500 x 400 x 800 mm Weight: 50 kg Auction-ID: A7-50798-136

The electronic digital tire pressure gauge is a modern device that allows you to quickly and accurately check your car's tire pressure. Auction-ID: A7-50799-39

An air dryer with filter and regulator, equipped with a standard 1/4\" air inlet connection. The device is designed to purify the incoming air from most liquid and solid particles. It is equipped with a pressure regulator that allows precise adjustment of the outlet air pressure, from 0 to 150 PSI. Auction-ID: A7-50799-62

Batch used various manual high-pressure valves (Rotarex / Tescom / Veriflo / GTC) incl bucket Auction-ID: A1-50936-273

Pneumatic spray gun to be used in combination with a paint tank. Auction-ID: A7-50799-300

Used Mbraun vov-1250 vacuum pressure vessel / vacuum boiler, without trolley Auction-ID: A1-50936-31

Capacity 4 ton, manual, never used Overall dimensions: 500 x 400 x 800 mm Weight: 50 kg Auction-ID: A7-50798-249

Capacity 4 ton, manual, never used Overall dimensions: 500 x 400 x 800 mm Weight: 50 kg Auction-ID: A7-50799-347

Code: 0504 Brand: ORMAMACCHINE Model: NPC 4/40 Hydraulic cold press for panels, furniture, woodworking shops, custom-made furniture, doors, composite materials, aluminum, and various other applications Sturdy structure Platens dimensions mm 2500 x 1200 covered with new aluminum sheets N° 4 pistons Total thrust 40 tons Motor Hp 2 Perimeter emergency cable Overall dimensions mm 3000 x 1450 x 2100 h Weight kg 2200

Case IH Puma 240 CVX 4WD tractor – 2019 – 9,475 hrs – Dutch registration Specifications: Brand/type: Case IH Puma 240 CVX Year of construction: 2019 Engine: 6-cylinder diesel engine Power: approx. 177 kW / 240 hp Hours: approx. 9,475 hours Transmission: CVX, stepless Top speed: 50 km/h PTO: 540/540E/1,000/1,000E rpm Front tyres: Trelleborg 600/60R30 Rear tires: Trelleborg 710/60R42 Weight: approx. 12,000 kg Technical total weight: approx. 14,000 kg Dimensions l x w x h: approx. 560 x 255 x 325 cm Features: 4WD Suspended front axle Cab suspension Air conditioning Leather cab upholstery Grammer Dual Motion Driver's Seat AFS touchscreen Front linkage management GPS Preparation Cruise control Radio Front linkage Front PTO K80 Clutch Drawbar Tipper knob in the carriage Double-acting hydraulic valve on the front 3-pin plug on the front 7-pin plug ...

1. Ford Gasoline Pressure Washer Gasoline-powered Ford pressure washer, model FPWG33400H, suitable for cleaning patios, driveways, vehicles and machinery. Equipped with a powerful motor, mobile frame and several interchangeable nozzles. Maximum working pressure approximately 234 bar (3,400 PSI) and water output approximately 10 liters per minute. 2. Hyundai Gasoline Pressure Washer Hyundai Power Products pressure washer, model 57535, with a maximum working pressure of 207 bar. Suitable for a variety of cleaning tasks around the house, workshop and company premises. Equipped with a mobile frame, high-pressure hose and spray gun. 3. Unbranded gasoline pressure washer Hyundai petrol pressure washer with a 170 cc engine, a power of approximately 6.5 hp and a maximum pressure of 2,500 PSI (approximately 172 bar). The machine has a water output of approximately 34 liters per minute according t ...

Different brands: sayer, Reigter, Leitenberg, Man and Gesa. Auction-ID: A1-47450-2056

TECHNICAL DATA: Work surface: 2550 x 1350 mm Solid worktops Including mezzanine level 04 Hydraulic cylinder: Ø 90 mm Vertical stroke: 550 mm Water operation Installed power: 2 hp

Hydraulic die spotting press for assembly, adjustment, inspection, maintenance and testing of large moulds and dies. Year 1991. Serial no. 635/2036. Useful platen dimensions approx. 2,000 × 1,500 mm. Distance between columns 2,130 × 1,630 mm. Vertical stroke 1,200 mm. Maximum closing force 1,500 kN (approx. 150 t). Maximum opening force 350 kN (approx. 35 t). Adjustable hydraulic pressure 0–250 bar. Maximum load on lower platen 30,000 kg and upper platen 15,000 kg. Upper platen rotation 100° and lower platen rotation 70°. T-slots 22 mm, DIN 650. Lower platen height from floor 770 mm. Rapid approach speed 65–80 mm/s, working speed 8 mm/s and return speed 35–50 mm/s. Main motor power 11 kW, auxiliary motor 1.1 kW, total installed power 12.1 kW. Electrical supply 380 V / 50 Hz. Approx. overall dimensions 6,150 × 2,130 × 4,700 mm. Approx. machine weight 27,000 kg. Equipped with o ...

Offer 26350 Technical data: - Punch height up to 120 mm - Punching head adjustment panel from 23.5 - 63.5 mm - max. profile thickness ( aluminium ) 3 mm - Max. working stroke 350 mm - Max. punching stroke 12 mm - Working pressure 7 bar - Air consumption per operation approx. 9 l - with: - footswitch - 2 vertical, pneumatic hold-down devices - Retractable abutments - Adjustable punching heads - 2 swivelling support arms - Space requirement approx. W 850 x H 1250 x D 800 mm - Weight approx. 350 kg

Datex-Ohmeda M-NIBP – Non-Invasive Blood Pressure Module Manufacturer: Datex-Ohmeda Model: M-NIBP Type: NIBP Monitoring Rack Module Condition: Pre-Owned Auction-ID: A1-51275-13

Novacor Diasys Integra II – ABPM Blood Pressure Holter (ECG / NIBP) Manufacturer: Novacor Model: Diasys Integra II Contents: Housing only, as shown in the photos Functions: Ambulatory measurement of systolic, diastolic, average pressure and heart rate; auscultatory, oscillometric and automatic modes Weight: Approx. 195 g Condition: Good, functionally tested Auction-ID: A1-51275-35

With buffer tank; with water meter; engine brand Elmot Schäfer 2.2kW; on pallet Auction-ID: A1-50864-55

Unused Working pressure 150 bar – 15 MPa Maximum pressure 150 bar – 15 MPa Capacity 900 l/h – 15 l/min Maximum temperature 90 °C Burner power 3.6 kW Engine power 3.2 kW Nutrition 230 V/50 Hz Detergent tank Diesel Weight 35 kg Auction-ID: A1-40407-40

Unused , 58kw , speed 1450 max 15l/min , working pressure 20mpa , max pressure 21 mpa Auction-ID: A1-40407-32

Robust metal structure with several adjustable clamping stations. Parallel groove work table, equipped with 3 set screws with operating handles. Set on metal frame with mobile supports on wheels, ideal for pressing and assembly operations. Size: 2500 x 1250 Functional Auction-ID: A1-51273-24

Unused in the original packaging The HDR180 petrol pressure washer offers complete independence from external power sources. Thanks to the powerful 7 hp Swedish motor, it can handle even the most demanding cleaning jobs. The robust Swedish outdoor equipment is specially designed for use in harsh conditions. As a special highlight, the Swedic Outdoor line has shock-absorbing buffers at the front and rear, a parking brake, an exhaust guard and large, solid rubber wheels for maximum mobility. Technical data: 7.0 hp OHV petrol engine with low oil protection Commercial Grade Direct Driven Cylinder Axial Pump 20 m high-pressure hose for maximum reach Quick connect nozzles: 0°, 15°, 25°, 40° and chemical nozzle Adjustable pressure up to 180 bar Low-pressure detergent injector for efficient detergent application High-pressure spray gun for precise work 2 m water inlet hose with filter for ...

Unused, Led display, 1000W, 2800RPM, 0.3-0.9MPA Auction-ID: A1-40407-118

Has N2 Nitrogen been in; Test pressure 16.5 bar; blue lacquered metal; equipped with lifting eyes Auction-ID: A1-50864-196

Auction-ID: A1-51211-62

Galvanized metal; equipped with lifting eyes Auction-ID: A1-50864-92

On adjustable tripodLot is equipped with flange valves and wall-mounted pressure gauge Auction-ID: A1-50864-80

Unused, Led display, 1000W, 2800RPM, 0.3-0.9MPA Auction-ID: A1-40407-47