ton press used for sale

40 TON PRESS MACHINE

Neerwaartse persbeweging met zijdelingse belasting - maximale openingsafstand: 400 mm - slag: 400 mm - Tafelafmetingen: 3500 x 3000 mm - De bovenste tafel kan verwarmd worden - De onderste tafel is niet verwarmd - 12 zuigers (diameter 90 mm)

Bespoke built Hydraulic press for the manufacture of airplane seat back Force: 100 ton Table size 2000mm x 2000mm Platens drilled for oil heating Run out table Omron PLC Cylinder in need for repair, oil heater not included

The most cost effective solution for extruders up to 3.000 kg/h., Very compact shape, less metal to heat up., High resistance to pressures line (up to 350 bar)., Minimum material waste due to the continuous cotamination removal., Adjustable speed of the discharge screw allows the finest handling. Continuous cleaning allows to use filters longer than traditional technologies., Pressure is kept constant all the time for a more even process, Easy maintenance: filter replacement easier and faster, without removing machine’s components. Also available with an automatic opening system that makes opening and closing lid’s operations easier, faster and safer., Double screening system : 2 x Ø 370 mm., With laser screens (from 60 to 350 µm), punched screens (from 400 to 2000 µm),, metallic mesh screens (from 230 to 10 mesh)., Bespoke screens available since they are produced in-house., Lase ...

WEISS AGGLOMERATOR, for LDPE LLDPE HDPE PP PS PET, complete with loading belt, metal detector, dual chamber system, n.2 rotating knives on each chamber, n.2 x 160 kw drives, control panel + electric cabinet, including :, extraction blower, pipes, cyclone, bag holding structure, machine reconditioned, INSTALLED POWER: 320 kw, capacity: 1.000 kg/h, PRESENT CONDITIONS: disconnected, SERVICES AVAILABLE: full reconditioning on separate offer

Conditie Old Stock Version 1 inch BSP Boring in mm 200 mm Stroke in mm 500 mm Shaft 75 mm Length retracted H.o.H. in mm 1010 mm Length from H.O.H. in mm 1510 mm Pressure in bar 200 bar Strength, kilo at 200 bar 60 ton Length 110cm Width 30cm Height 30cm All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)

Capacity: 50 ton Projection: 225 mm Stroke: 320 p/min Large table: 500 x 800 mm

250 Ton x 5100mm Over Bed CNC Press Brake. Admitting 4500mm Between Side Frames. 3000mm Long Heavy Duty Back Gauge. Including Cybelec DNC 800 8 axis control. (Y1, Y2, X1, X2, Z1, Z2, R1, R2) Auto Crowing. Infra-Red Operator Guards. Hydraulic Top Tool Clamping. Side & Rear Safety Fences. Tooling Carousel. S/No 97P288. New 1997

working lenght 3.050 mm power 60 ton throat deepth 350 mm CNC cybelec nr.02 axes back gauge manual table compensation

Qty. 1 Second-hand press for production of Aluminium pots and discs Mfc.: SITI Built: 2005 Renewed in by experts Duration: 3-4 months Force: 4000 Ton Production of Aluminium discs & induction & normal pots Pots height: 120 / 140 mm The press will be overhauled and revamped and sold as specified below: New Piston Grinding of cylinder New Flange Table modification New pumps New gaskets etc . New electric and electronical parts New program

150 ton x 4000mm

pressure: 25 t stroke: mm table surface area: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Brand: WP Capacity: 25 T Distance between columns: 760 mm Distance between cylinder and table: 950 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

LVD PP 80 ton x 3100 mm

Metal Powder Preformer Technical Specifications: Model Designation 1250 kN PELLETER Modes of Operation Automatic Configuration Single Station Design Self-contained Direction of pressing Horizontal Material loading Automatic Material Unloading Semi-automatic Drive Self-contained Main Ram Pressing Force (max) 1250 kN 125 Tons Main Ram Pressing Force (min) 125 kN 12.5 Tons Main Ram Stroke (max) 105 mm 4.13 ins Max Hopper & Die Stroke 270 mm 10.63 ins Max Fill Length 120 mm 4.72 ins Min Fill Length 25 mm 1 ins Hydraulic Oil Specification ISO VG46HM Oil Tank Capacity 300 Ltrs 66 Galls Hydraulic ...

3000kN BIPEL press with electrical equipment to suit 415 Volt, 3 Phase, 50 HZ, A.C. Supply. Generally in accordance with the following specification and comply with current supply of safety regulations Model 3000kN BIPEL Press Application Compression Moulding Mode of Operation Manual and Semi-Auto Frame structure Steel plate frame Frame number Cylinder type Double acting Pressing force kN 3000 Pull back force at circuit pressure kN 120 Operating height mm Approx. 930 Stroke mm 610 Daylight between Tables mm 1206 Heated Platens mm 841 Table size L -R mm 774 F-B mm 889 No. Of Heated platens 2 Heated platen size  ...

Capacity, ton 630 Stroke path till its position where it develops nominal capacity, mm 16 Slider stroke, mm 320 Slider strokes, spm 20 Max. distance between table and slider, mm 800 Distance adjustment between table and slider, mm 180 Table size, mm 1250 x 1250 Slider dimensions, mm 1000 x 1000 Opening in the table, mm 800 x 800 Thickness of bolster, mm 180 Cushion stroke, mm 130 Main motor power, kW 58 Machine dimensions, mm 3280 x 3470 x 6190 Machine weight, kg 55500

Keeldiepte: 405 mm slag: 21 mm 55 slagen per minuut Punching pressure: 45 ton Max punching dia: Ø 27 in 13 mm / Ø 39 in 9 mm Power needed: 2,2 kW Length: 1300 mm Depth: 800 mm Height: 2050 mm Weight: 1000 kg

Hydraulic press 1500 tons. Clearance between the two side pistons = 1400 mm. Clearance between uprights = 400 mm. Vertical clearance between open boards 3200 mm. Moving table dimensions = 1700 x 1800 mm. Fixed table size = 1500 x 2000 mm. This press has been used to produce forks for forklift.

100 ton x 3000mm with ANTIL Robot

100 ton x 3000mm 8 Axis

for sale - PROFI Hydraulic Workshop Press HF2 30 tons Clear width 560 mm Hand and foot operation Piston stroke 160 mm Cylinder diameter 115 mm Weight approx. 165 kg further models and inquiries to FSA Maschinen AG

6500ton Open Die Forging Press HJ / Seonam (Korea) Design: Eastern European Corporation Installation: 2006/2008 Press Type: Four column push down Oil hydraulic system Nominal force (static working pressure of 320 bar): 5,000 Tons Up-setting force (static working pressure of 420 bar): 6500 Tons Daylight: 5,200 mm Stroke of Movable cross head: 2,700 mm Main Ram dia. (Center cylinder): 1 set - ￠950 mm Side Ram dia. (Side cylinder): 2 sets - ￠750 mm Return cylinder Ram dia: 2 sets - ￠300 mm Moving Table Width: 2,600×Length 6,600 mm Moving Table stroke (center to both side 2,750mm): 5,500 mm Approaching speed: 300 mm/sec Main cylinder Forging speed (2,200 tons/ 320 bar): 163 mm/sec All cylinder Forging speed (5,000 tons/ 320 bar): 73 mm/sec Up-setting Forging speed (6,500 tons/ 420 bar): 10 mm/sec Return speed: 270 mm/sec Hydraulic Main pump: 12 sets  ...

Nominal force 1250 ton - first stage : 260 tons, - second stage : 800 tons, - third stage : 1250 tons, Slide stroke 1250 mm Distance between table and slide 2650 mm Main cylinder dia Ø 500mm Return cylinder dia. ( two) 2xØ400mm Distance between column 1800mm Table size width / length 1250 / 3150 mm Main motor power 150 kW Machine dimensions L x W x H 16950 x 12100 x 11410 mm Weight 265000 kg Forging manipulator FS2ЕТС -2T also available 1T and 700t

Beyeler RH 100 ton x 3100 mm Capacity: 100 ton x 3100 mm Backgauge: manual Passage between uprights: 2630 mm Max stroke: 215 mm Max distance between table -- ram: 410 mm Depth of throat: 255 mm Locking speed: 100 mm/sec Working speed: 6,5 mm/sec Electric motor (power): 5,5 kW Length: 3300 mm Depth: 1550 mm Height: 2450 mm Weight: 7 ton

LVD PPBL 200 ton x 4100 mm Capacity: 200 ton x 4100 mm Backgauge: manual Passage between uprights: 3150 mm Max stroke: 150 mm Max distance between table -- ram: 400 mm Depth of throat: 250 mm Table width: 200 mm Locking speed: 100 mm/sec Working speed: 6,5 mm/sec Returning speed: 65 mm/sec Electric motor (power): 11 kW Weight: 13,4 ton

LVD PPS-TS 100 ton x 3100 mm CNC Capacity: 100 ton x 3100 mm Backgauge: CNC Control: Cadman Express Passage between uprights: 2550 mm Max stroke: 150 mm Max distance between table -- ram: 350 mm Depth of throat: 250 mm Locking speed: 100 mm/sec Working speed: 10 mm/sec Returning speed: 80 mm/sec Electric motor (power): 16 kW

pressure: 200 t stroke: 400 mm table surface area: Arbeitsbreite 1300 mm pressure: 243 bar oil volume: 64 dm³ ajustment speed: 5,73 mm/sec work speed: 1,84 mm/sec return speed: 7,08 mm/sec total power requirement: 3,0 kW weight of the machine ca.: 1690 kg Inner diameter of the cylinder [mm]: 320 Piston rod diameter [mm]: 140 Diameter piston crown [mm]: 175 - adjustable cylinder (left-right) - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Working table adjustable in height - Joystick to move the piston up / down - Hand pump for precision work - with digital display This 200 ton hydraulic press is equipped with a movable cylinder (left- right), a height-adjustable work table, a pressure regulator, 2 speeds, a joystick and a hand pump for precision pressing fitted. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Upstroke press Top lid can tilt open to allow mould to be (un)loaded Capacity: 150 ton Passage between uprights: 1850 mm Max ram adjustment: 500 mm Distance between table -- ram: 1000 mm Table area: 1800 x 1300 mm Height: 2350 mm

Haco PPM 135 ton x 3100 mm Capacity: 135 ton x 3100 mm Backgauge: electric Passage between uprights: 2600 mm Max stroke: 120 mm Max distance between table -- ram: 325 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 70 mm/sec Working speed: 7 mm/sec Returning speed: 60 mm/sec Electric motor (power): 10 HP Length: 3270 mm Depth: 1550 mm Height: 2240 mm Weight: 7,5 ton

LVD PPBL-H 135 ton x 3100 mm Capacity: 135 ton x 3100 mm Passage between uprights: 2550 mm Max stroke: 130 mm Max distance between table -- ram: 310 mm Depth of throat: 200 mm Table width: 140 mm Locking speed: 100 mm/sec Working speed: 7 mm/sec Returning speed: 65 mm/sec Electric motor (power): 7,5 kW Weight: 6,5 ton

LVD PPBL-H 70 ton x 3100 mm Capacity: 70 ton x 3100 mm Passage between uprights: 2550 mm Max stroke: 100 mm Max distance between table -- ram: 300 mm Depth of throat: 200 mm Table width: 140 mm Locking speed: 100 mm/sec Working speed: 7 mm/sec Returning speed: 60 mm/sec Electric motor (power): 4 kW Length: 3200 mm Depth: 1350 mm Height: 2100 mm Weight: 5 ton

LVD PPBL 70 ton x 3100 mm Capacity: 70 ton x 3100 mm Passage between uprights: 2550 mm Max stroke: 100 mm Max distance between table -- ram: 300 mm Depth of throat: 200 mm Table width: 140 mm Locking speed: 80 mm/sec Working speed: 7 mm/sec Returning speed: 88 mm/sec Electric motor (power): 5 kW Length: 3200 mm Depth: 1260 mm Height: 2100 mm Weight: 4 ton

Amada Promecam ITPS 100 ton x 3100 mm CNC Capacity: 100 ton x 3100 mm Backgauge: CNC Control: EMA Passage between uprights: 2600 mm Max stroke: 105 mm Max distance between table -- ram: 370 mm Depth of throat: 400 mm Table width: 90 mm Locking speed: 85 mm/sec Working speed: 10 mm/sec Returning speed: 80 mm/sec Electric motor (power): 10 kW Length: 3640 mm Depth: 2210 mm Height: 2340 mm Weight: 6580 kg

Amada Promecam RG 50 ton x 2100 mm Capacity: 50 ton x 2100 mm Passage between uprights: 1690 mm Max stroke: 100 mm Max distance between table -- ram: 300 mm Depth of throat: 400 mm Table width: 60 mm Locking speed: 48 mm/sec Working speed: 10 mm/sec Returning speed: 70 mm/sec Electric motor (power): 7,5 HP Length: 2100 mm Depth: 1400 mm Height: 1850 mm Weight: 3 ton

Amada Promecam RG 50 ton x 2100 mm Capacity: 50 ton x 2100 mm Passage between uprights: 1690 mm Max stroke: 100 mm Max distance between table -- ram: 300 mm Depth of throat: 400 mm Table width: 60 mm Locking speed: 48 mm/sec Working speed: 14 mm/sec Returning speed: 70 mm/sec Electric motor (power): 7,5 HP Length: 2100 mm Depth: 1400 mm Height: 1850 mm Weight: 3 ton

- 8 assen: Y1 / Y2 / X / R1 / R2 / Z1 / Z2 / V - nieuwe 2D Touch grafische besturing - zware achteraanslag - Amada-bomberingssysteem (V) - nieuw laserbeveiligingssysteem Machine kan gedemonteerd worden in onderdelen, kan in containers worden getransporteerd Capacity: 630 ton x 8100 mm Backgauge: heavy duty CNC Control: 2D Touch Passage between uprights: 7210 mm Max stroke: 350 mm Max distance between table -- ram: 650 mm Depth of throat: 400 mm Table width: 350 mm Locking speed: 70 mm/sec Working speed: 8 mm/sec Returning speed: 50 mm/sec Electric motor (power): 47 kW Power needed: 380V Length: 8300 mm Depth: 2600 mm Height: 4400 mm Weight: 90 ton

LVD PPCB 150 ton x 4100 mm CNC Capacity: 150 ton x 4100 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 3150 mm Max stroke: 150 mm Max distance between table -- ram: 350 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 90 mm/sec Working speed: 7,3 mm/sec Returning speed: 56 mm/sec Electric motor (power): 7,5 kW

LVD PP 70 ton x 3100 mm Capacity: 70 ton x 3100 mm Backgauge: no backgauge Passage between uprights: 2550 mm Max stroke: 120 mm Max distance between table -- ram: 300 mm Depth of throat: 200 mm Table width: 200 mm Locking speed: 100 mm/sec Working speed: 8,5 mm/sec Returning speed: 50 mm/sec Electric motor (power): 7,5 HP Weight: 5,6 ton

Haco PPM 100 ton x 3100 mm CNC Capacity: 100 ton x 3100 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 2600 mm Max stroke: 120 mm Max distance between table -- ram: 325 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 70 mm/sec Working speed: 7,2 mm/sec Returning speed: 60 mm/sec Electric motor (power): 6 kW Length: 3270 mm Depth: 1550 mm Height: 2240 mm Weight: 7 ton

Haco PPH 135 ton x 4100 mm CNC Capacity: 135 ton x 4100 mm Backgauge: CNC Control: Delem DA-41T Passage between uprights: 3600 mm Max stroke: 120 mm Max distance between table -- ram: 325 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 70 mm/sec Working speed: 7,2 mm/sec Returning speed: 62 mm/sec Electric motor (power): 11 kW Length: 4270 mm Depth: 1500 mm Height: 2470 mm Weight: 9,1 ton

7 assen: Y1 /Y2 / X / Z1 / Z2 / R1 / R2 Amada-bombardement Capacity: 125 ton x 3100 mm Backgauge: CNC Control: Delem DA65R Passage between uprights: 2600 mm Max stroke: 100 mm Max distance between table -- ram: 300 mm Depth of throat: 400 mm Locking speed: 85 mm/sec Working speed: 10 mm/sec Returning speed: 80 mm/sec Length: 3245 mm Depth: 1940 mm Height: 2415 mm Weight: 7,7 ton

3 assen: Y1 / Y2 / X Capacity: 220 ton x 3100 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 2600 mm Max stroke: 200 mm Max distance between table -- ram: 450 mm Depth of throat: 300 mm Locking speed: 100 mm/sec Working speed: 8 mm/sec Returning speed: 80 mm/sec Electric motor (power): 19 kW Length: 3500 mm Depth: 1900 mm Height: 2700 mm Weight: 10,5 ton

Durma HAP 200 ton x 3100 mm Capacity: 200 ton x 3100 mm Backgauge: elec Passage between uprights: 2550 mm Max stroke: 190 mm Depth of throat: 260 mm Locking speed: 100 mm/sec Working speed: 7 mm/sec Returning speed: 73 mm/sec Length: 4270 mm Depth: 1750 mm Height: 2850 mm Weight: 12 ton

upper amp; lower Wila tooling 5 axes: X / X´ / R / Z1 / Z2 Capacity: 50 ton x 2550 mm Backgauge: CNC Control: TS3 Passage between uprights: 2550 mm Max stroke: 265 mm Max distance between table -- ram: 515 mm Locking speed: 90 mm/sec Working speed: 20 mm/sec Returning speed: 90 mm/sec Electric motor (power): 9 kW Length: 3400 mm Depth: 1850 mm Height: 2820 mm Weight: 5 ton

Haco PPM 175 ton x 3600 mm Capacity: 175 ton x 3600 mm Backgauge: electric Passage between uprights: 3150 mm Max stroke: 200 mm Max distance between table -- ram: 450 mm Depth of throat: 300 mm Locking speed: 80 mm/sec Working speed: 9 mm/sec Returning speed: 95 mm/sec Electric motor (power): 15 kW Length: 3880 mm Depth: 1750 mm Height: 2750 mm Weight: 13,4 ton

4 assen: Y1 / Y2 / X / V Laserbeveiliging voor en achter Capacity: 250 ton x 4100 mm Backgauge: CNC Control: Cadman Touch-B Passage between uprights: 3150 mm Max stroke: 250 mm Max distance between table -- ram: 500 mm Depth of throat: 350 mm Table width: 250 mm Locking speed: 80 mm/sec Working speed: 10 mm/sec Returning speed: 80 mm/sec Electric motor (power): 30 kW Length: 5545 mm Depth: 1990 mm Height: 3380 mm Weight: 23 ton

Haco ERM 320 ton x 6100 mm CNC Capacity: 320 ton x 6100 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 5050 mm Max stroke: 250 mm Max distance between table -- ram: 500 mm Depth of throat: 330 mm Locking speed: 80 mm/sec Working speed: 8 mm/sec Returning speed: 100 mm/sec Electric motor (power): 22,5 kW Length: 6500 mm Depth: 1980 mm Height: 3700 mm Weight: 33 ton

LVD PPNMZ 1200 ton x 12 meter CNC Capacity: 1200 ton x 12 meter Backgauge: CNC Passage between uprights: 5050 mm Max stroke: 300 mm Max distance between table -- ram: 600 mm Depth of throat: 350 mm Table width: 300 mm Locking speed: 80 mm/sec Working speed: 7 mm/sec Returning speed: 46 mm/sec Electric motor (power): 44 kW

8 assen: Y1 / Y2 / X1 / X2 / R1 / R2 / Z1 / Z2 4 plaatsteunen aan de voorkant laserveilige beveiliging Willa gereedschap Capacity: 220 ton x 6100 mm Backgauge: CNC Control: Cadman-B Touch Passage between uprights: 5050 mm Max stroke: 200 mm Max distance between table -- ram: 400 mm Depth of throat: 400 mm Table width: 120 mm Locking speed: 120 mm/sec Working speed: 21 mm/sec Returning speed: 200 mm/sec Electric motor (power): 42 kW Weight: 24 ton

12 assen: Y1 / Y2 / X1 / X2 / X3 / R1 / R2 / R3 / Z1 / Z2 / Z3 / V 5 plaatsteunen aan de voorkant Willa hydraulische gereedschapsadapter 3 achteraanslageenheden Achteraanslagbereik: 1250 mm Capacity: 400 ton x 7100 mm Backgauge: CNC Control: Cadman Passage between uprights: 6050 mm Max stroke: 300 mm Max distance between table -- ram: 550 mm Depth of throat: 300 mm Table width: 250 mm Locking speed: 90 mm/sec Working speed: 9,5 mm/sec Returning speed: 65 mm/sec Electric motor (power): 37kW Weight: 38 ton