ton hydraulic used for sale

Offer 26031 Technical data: - Cutting length 3080 mm - Cutting thickness 13 mm - Cutting angle controlled 0.5 - 3 ° - Number of sheet hold-downs 18 pcs - Stroke rate 10 - 23 min - Mot. Controlled backgauge up to 750 mm - Front angle stop + support arms 1000 mm - Control CYBELEC DNC 10 when entering the sheet thickness in mm - Autom. Cutting angle adjustment according to sheet thickness - Cutting length limitation - Autom. Positioning of the backgauge - Rear space protection with light barrier - Drive 400 V / 18.5 kW - Footswitch - Space requirement approx. W 3850 x H 1750 x D 1800 mm - Weight approx. 10500 kg

Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high-pressure pump, high-pressure hand pump, hydraulic hand pump -Manufacturer: RARIPRESS, Hydraulic pump, hand pump, high-pressure pump -Type: RP 62C -Pressure range: max. 700 bar -Quantity: 1x hand pump available -Dimensions: 580/185/H180 mm -Weight: 14.7 kg

: neu : ca. 12 Wochen ab Auftrags : Türkei : 7700 € : 148.61 € : 80 to : horizontal verschiebbar : 250 mm : 1040 mm : 865 mm : 200x120 mm : 5 mm/s : 10 mm/s : 1710 mm : 700 mm : 2100 mm : 835 kg horizontal adjustable cylinder with clamping lever steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

In stock in hard case, dimensions hard case approx. 800x600x450 mm Auction-ID: A1-45495-432

Application: mobile and intelligent hydraulic pump for controlling and documenting bolting procedures. Serial number: 600/002/2011, with pressure sensor and display, including transport box and lattice box Auction-ID: A1-45495-285

Included: Case Auction-ID: A1-45495-278

In stock in wooden box, dimensions wooden box approx. 800x540x630 mm Auction-ID: A1-45495-421

3 x Hydraulic Bolt Tensioning Cylinder from ITH with Case, 2 x Hydraulic Pump from Hytorc Auction-ID: A1-45495-364

In stock in wooden box, dimensions wooden box approx. 800x540x630 mm Auction-ID: A1-45495-420

In stock in wooden box, dimensions wooden box approx. 800x540x630 mm Auction-ID: A1-45495-423

Included: Case without instruction manual Auction-ID: A1-45495-277

With integrated core weighing device, type VHB. Max. 2000 kg. Auction-ID: A1-45495-210

In orig. packaging, in stock in wooden box Dimensions wooden box approx. 2090x390x455 mm Auction-ID: A1-45495-447

Included: 2 x cases and accessories Auction-ID: A1-45495-279

In stock on pallet, overall dimensions approx. 2030x1200x540 mm Auction-ID: A1-45495-445

Consisting of 9 cases with Hytorc tools and hose sets, including: pallet Auction-ID: A1-45495-318

Guillotine shears Manufacturer: LVD Type: MVSB 62/8 Year of Make: 1993 Max. working length: 6,200 mm Sheet thickness: 8 mm Weight approx.: 13.000 kg

For sale I offer a hydraulic hand pump from Tecpos. The hand pump was used as a demonstration device in the past and accordingly shows signs of use. Details: Tecpos ESP-08 Operating pressure: max. 700 bar Oil Supply: 800cc Shipping available for an extra charge. The hydraulic hand pump is workshop tested and sold ready for immediate use with a new UVV test and can be tested on site. Other accessories available on request. # Hand Hydraulic Pump # Hand Pump # Hydraulic Cylinder # Hydraulic Hand Pump # High Pressure Pump # High Pressure Hand Pump # Hydraulic Hand Pump # Hydraulic Pump

Hydraulic Power Unit Type: Hydraulic power unit Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-73

Hydraulic Station Type: Hydraulic station / hydraulic power unit Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-46

Hydraulic Material - 5 Carts with Fittings and Components Type: Hydraulic material Contents: 5 carts loaded with new hydraulic components stored in assorted bins Load capacity: 200 kg - 500 kg Approx. total weight: 4000 kg Approx. dimensions per cart (L x W x H): 1300 x 1300 x 2000 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-38

This frame press is CE certified according to the latest guidelines - With manual hydraulics - Move cylinder sideways - 2 pcs press block 200x250x40mm / 200x70x40mm, max. 30t with M16 threaded holes and some M16 threaded bolts - 8 pcs press bolts, 10 - 30mm, with quick-change adapter, max. 20t - 2 Press pads Pressure 10 t Stroke 180 mm Clear width between uprights 335 x 115 mm Installation height max. 340 mm Cylinder diameter 56 mm Piston diameter 40 mm Machine weight approx. 0.05 t Dimensions approx. 0.75 x 0.53 x 1.6 m Auction-ID: A1-45681-737

Various Hydraulic Cylinders Type: Various hydraulic cylinders and hydraulic components Contents: Assorted hydraulic cylinders of various sizes and types, including compact hydraulic motors and valve blocks, stored on a 5-shelf wooden rack Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-40

A hydraulic press brake Steiner is available. Power: 30kW, max. pressing force: 300Mp, passage width: 2550mm, max. stroke: 240mm. Machine dimensions X/Y/Z: approx. 2700mm/2350mm/3450mm, weight: approx. 21000kg. An on-site inspection is possible.

Frame press, CE certified according to the latest guidelines. - With manual hydraulics - Move cylinder sideways - 2 pcs press block 200x250x40mm / 200x70x40mm, max. 30t with M16 threaded holes and some M16 threaded bolts - 8 pcs press bolts, 10 - 30mm, with quick-change adapter, max. 20t - 2 Press pads Pressure 20 t Stroke 180 mm Clear width between uprights 540 x 100 mm Installation height max. 990 mm Cylinder diameter 72 mm Piston diameter 48 mm Machine weight approx. 0.12 t Space requirement approx. 0.8 x 0.7 x 1.8 m Condition: never used / new (5) Auction-ID: A7-45761-787

Load capacity: maximum. 500 kg Including: assembled plastic plate: 115 x 130 (L/W) Auction-ID: A1-45762-23

Load capacity: maximum. 500 kg Auction-ID: A1-45762-90

Qty 2, Fork width 540mm. Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-35

Qty 2, Fork width 540mm. Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-132

Qty 2, Fork width 540mm. Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-133

Load capacity: maximum. 500 kg Auction-ID: A1-45762-74

Hydraulic power unit comes from a Waldrich long planing machine Weight 400Kg LxWxH 1200 x 800 x 1200mm Condition: unchecked (6) Auction-ID: A7-45761-796

Fork width 540mm. Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-37

Information: - Weight class: 10 - 15 t - Weight: 1,050 kg - Operating pressure: 147 - 167 bar - Oil flow: 80 - 110 l/min - Impact force: 2033 J - Hose connections: 3/4 inch - Chisel diameter: 100 mm - Chisel guide bushed - 2 pyramid chisels - Hoses 1800 mm length

Key data: 40 t, 450 mm, 160 mm

Press force 400 kN , table 450x560 , ram 375x300 , distance table joints 340 stroke 160 , puncture hole 100 diameter, silky column passage 220x410

Key data: 300 t, 2 mm, 600 mm

Pressure: 300 tons Distance between the uprights 1800mm Side passages: Yes Installation height: 1000mm Table: 1800x1000mm Plunger: 1800x1000mm Stroke: 600mm Weight: 43 tons Height: 4700mm Siemes S7 Controller Ground-level installation Sick Light Barrier Cushion: Stroke 200mm

Brake 2x45 Nm, mounted on AUMANN substructure Auction-ID: A1-45682-30

Hydraulic pressure 700 bar with hand pump Auction-ID: A1-45682-22

Max. lifting height 2450 mm Auction-ID: A1-45682-27

LARA SHEAR CDCH-1400 (year 2018) With a tow table. Hydraulic shear designed for the cross-cutting of strip and management of sheet metal surplus in coil feeding lines. It is supplied together with a feed table, allowing a comfortable and safe evacuation of the cut material and maintaining a clean and continuous production process. Robust equipment, of heavy industrial construction, especially suitable as auxiliary equipment in cutting, stamping or coil feeding lines. Work materials -Carbon steel -Stainless steel -Aluminum and light alloys Main technical data - Maximum working width: up to 1,400 mm -Drive type: hydraulic -Working pressure: 4–6 bar (pneumatic control system) -Power supply: 400 V / 50 Hz  

Hydraulic pump on blue transport trolley

Bolt Hydraulic Hoses, Shelf

Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Manufacturer: Rexroth, hydraulic power unit, hydraulic station -Type: Rexroth AHAG -Pressure: 250 bar -Flow rate: 42 l/min / 2 working circuits -Motor: ABB 11 kW / 1455 rpm -Hydraulic reservoir: Tank capacity 160 l with level indicator -Return filter: RFBNHC 330F10 A1.X -Pressure reservoir: Hydac, capacity 10 l -Individual components: see photos -Dimensions: 1340/680/H1500 mm -Weight: 484 kg

Probably defective, in stock on pallet, total dimensions approx. 800x600x520 mm Auction-ID: A1-45790-507

Hydraulic press for climping hydraulic pipes, equipped with all the necessary dies for 0 pipes. 5 to 50 mm, never used 0 hours, packed in wooden crate Overall dimensions: 1000 x 1000 x 1400 mm Weight: 310 kg Auction-ID: A7-45832-1

This 3-axis SXKH HMG-300JM hydraulic press was manufactured in 2014. It features a substantial table dimension of 2200 x 1800 mm and a weight capacity of 36000 kg. The machine operates with a forward speed of up to 4200 mm/min and has a power rating of 30 kW. If you are looking to get high-quality pressing capabilities, consider the SXKH HMG-300JM machine we have for sale. Contact us for further details.

Youtube function video: https://youtube.com/shorts/OBVDwbD3IUk FEM3 (approx. 50cm): Fits any forklift with a payload of 3,000-5,000kg Fork length: 120-200cm Auction-ID: A1-45450-1174

Hydraulic shearing machine manufactured in 2006. This Durma SB 3060 features a maximum cutting length of 3050 mm and can handle sheet thicknesses of approximately 6 mm. It includes a motorized backgauge with a range of 10–1000 mm for precise cuts. If you are looking to get high-quality shearing capabilities, consider the Durma SB 3060 machine we have for sale. Contact us for further details.

This 3-axis DEMAG ERGOTECH 1500-840 was manufactured in 1999. It features a clamping force of 1500 kN and a screw diameter of 45 mm, making it suitable for processing various materials such as PA, PP, PE, and ABS. The machine has a maximum pressure of 190 bar and a stroke volume of 358 cm³. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG ERGOTECH 1500-840 hydraulic injection moulding machine we have for sale. Contact us for further details.

Stroke 50 mm, max opening 200 mm, never used Overall dimensions: 400 x 200 x 150 mm Weight: 5 kg Auction-ID: A7-45834-124