ton hydraulic used for sale

Dubbele rubberen wielen op elke hoek 1 draaibare as Afmetingen: 4000 x 2000 mm Hoogte: ± 670 mm

This TONGTAI VP-8 Vertical Machining Centre was manufactured in 2016 in Taiwan. It has a table size of 900 x 510 mm with a max. table load of 500 kg and is equipped with a FANUC control. This 3-axis machining centre ( X/Y/Z axis travel: 820/510/535 mm) has an excellent condition for a used machine and can be visited at any time.

This TONGTAI HA-500II Horizontal Machining center was manufactured in the year 2016 in Taiwan. It is equipped with a Fanuc control unit and has 4 axis. The machine has a spindle speed of 12000 rpm.

x-travel: mm y-travel: mm z-travel: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Demag 3,2 ton x 17 500 mm Kind of: overhead travelling crane Capacity: 3,2 ton Span: 17 500 mm

SWF-hijsinstallatie Kind of: overhead travelling crane Capacity: 10 ton Span: 17 000 mm

Cluma 10 ton x 18 600 mm Kind of: overhead travelling crane Capacity: 10 ton Span: 18 600 mm

General SKU240K185 LocationBarneveld MakeV. Tonazzi &: C. Milano TypeColibri 40 No.04891896 Main Features MaterialStainless steel Tube (Material)Aluminium Dosing300 ml Specified Features - Tube filler Tube fillercheck Automatic tube filler(1x) Suitable for aluminium tubescheck Dosing3-300 Ml Tube diameter10-50mm Tube length50-200mm Capacitymax. 2400 p/Hr With closing headcheck With ejectorcheck With motor± 1,0 KW, 380 Volt With variable speed drivecheck With hoppercheck With format sizes(± dia. 25mm) MaterialStainless steel General Year of construction1989 With switchcheck Floorspace1,2x0,8 M Total height2,0 M Weight450 KG Technical specs Extra informationwith format size: (± dia. 25mm)Oils & fatOintmentsBiotechnologyOther pharmaceuticsCosmeticsConfectioneryTube fillersTonazzi MilanoIndustries > Food & Feed > Oils & fatIndustries > Pharmaceutical > Oin ...

Key data: 250 t, 4100 mm

6 Axis Byvision / Laser Guards

WMW PYE 250 ton Capacity: 250 ton Depth of throat -- ramcentre: 360 mm Max ram adjustement: 500 mm Drawning speed: 200 mm/sec Returning speed: 110 mm/sec Distance between table - ram: 1000 mm Ram area (L x D): 900 x 630 mm Eletric motor (power): 20,5 kW Weight: 8,2 ton

For sale is a hydraulic single-column press (C-frame) with a press force of 100 t. The machine has a table size of 700 × 750 mm, a maximum installation height of 550 mm and a stroke of 400 mm, making it suitable for a wide range of pressing, assembly and forming work in industry and production. Technical data + information: Hydraulic Single Post Press – C-Frame – 100 T Allgemeine Disclosures - Type: Single column press / C-frame - Press force: 100 T - Table size: 700 x 750 mm - Max. distance plunger – table: 550 mm - Working height: 1000 mm - Overall dimensions (WxDxH): 1200 x 1150 x 2550 mm - Total weight: approx. 5,800 kg - Frame: welded steel frame - T-slots / holes: DIN 650 / 22 mm Hydraulikzylinder - Stroke: 400 mm - Piston rod Ø: 80 mm - Cylinder Ø: 140 mm - Max. working pressure: 270 bar - Replaceable crimping head: Ø 100 mm Hydraulikaggregat ...

Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel gripper, panel gripper, lifting claw, lifting clamp -Manufacturer: Evers, lifting clamp IPHGZ -Clamping range: 0 - 25 mm -Load capacity: 1.5 t -Dimensions: 200/110 / H300 mm -Weight: 8 kg

Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp -Manufacturer: ip, safety lifting clamp type IPUZ with swiveling support ring -Clamping range: 0 - 25 mm -Load capacity: 3 t -Number: 1x terminals available -Price per piece -Dimensions: 230/90/H380 mm -Weight: 16 kg/pc.

Heavy-duty transport rollers, machine rollers, transport trolleys, heavy-duty trucks, tank rollers, machine transport rollers steering mechanism -Machine transport rollers: 4 tank rollers -Load capacity: 30 t (7.5t per piece) -Support height: 110 mm -Plates: 3x Ø 140 mm / 1x width 135 mm -Submission/Price: complete -Dimensions of transport case: 1005/200/H165 mm -Total weight: 57 kg.

Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device -Manufacturer: Yalel, multi-purpose cable pulley type Yaletrac 3.2 TON -Load capacity: 3200 kg -Steel cable: Ø 16 mm / not included, selection in stock at an additional cost -Number: 2x cable pull available -Price: per piece -Dimensions: 700/150/H370 mm -Weight: 22 kg/piece

Cable winch, hoist winch, construction winch -Mechanical winch: with planetary gear without drive -hydraulic brake -Traction force: approx. 20,000 kg -Drum: Ø 500 mm -Rope diameter: 24 mm -Rope to be wound length: 2x 28 m -Number: 2x winches available -Price: per piece -Dimensions: 1640/700/H700 mm -Weight: 1026 kg/piece

Welding manipulator Type: P82 14VF Hydraulic lifting and tilting Electric turning MANIPULATOR: yes Capacity: 9,5 ton

Neerwaartse persbeweging met zijdelingse belasting - maximale openingsafstand: 400 mm - slag: 400 mm - Tafelafmetingen: 3500 x 3000 mm - De bovenste tafel kan verwarmd worden - De onderste tafel is niet verwarmd - 12 zuigers (diameter 90 mm)

Silo system with 4 containers HB-TECHNIK - Capacity of a total of 16 tons of flour - 4 aluminium silos - Incl. scale and dosing unit - Condition: Good, ready to use - already dismantled - Transport costs and assembly on request

Used stainless steel, vertical silo made by German company AZO, capacity: 12 tons (approx. 7.2 m³). The silo features a vibrating floor, a silo discharge valve, and a blow-off pipe. Used for storing PVC powder. 10 units available.

AUTOMATIC EDGE SANDING machine with 3 units , model TONELLI OTB.15 ( made in ITALY ) second hand machine working condition: Excellent, like new CE regulation: YES voltage: 380/50 for sanding panel edges, on raw and painted edges, flat and shaped, solid, veneered, profiles, frames and various technical data: electric working height adjustment minimum working height: mm.3 maximum working height: mm.100 minimum working width: mm.60 track feed speed adjustable from the control panel: from 5 m/min to 30 m/min track feed with rubber pads and adjustable rubber pressure wheels feed track motor power: 2 HP machine composed of 3 independent units: 1° unit : tilting oscillating sanding unit - pneumatic pad - motor 2 speeds Hp 1,9 / 3,3 - automatic group entry - belt cleaning blower 2° unit : 45° oscillating sanding unit - pneumatic pad - motor 2 speeds Hp 0,6 / 1,2 - autom ...

Demag hoist 10 ton Kind of: hoist Capacity: 10 ton Drop: 6,5 meter Tackle speed: 0,6 & 6 m/min

Size: 450 x 460 mm Equipments: Hoist duplex tires Lifting height 225 cm Weight 18700 KG Diesel 6 Cylinder Deutz Motor Stacker length 360 cm width 200 cm installation height 240 cm Fork length 250 cm width 30 cm

ZM coil clamp 5 ton

ZM coil clamp 15 ton

Hijshaak voor spoelen Armlengte: 930 mm

Hijshaak voor spoelen Armlengte: 800 mm

Hijshaak voor spoelen Armlengte: 1000 mm

Hijshaak voor spoelen Armlengte: 1220 mm Gewicht: 1050 kg

Planetary mixer Tonelli M 120 Year of Make: 2003 Condition: functional Siemens control system Boiler capacity: 120 litres Incl. 2 tank cars Incl. 2 tools Accessories of choice and availability

Planetary mixer Tonelli M 120 Year of Make: 2007 Condition: functional Siemens control system Boiler capacity: 120 litres Incl. 2 tank cars Incl. 2 tools Accessories of choice and availability

Planetary mixer Tonelli PDC 120 Universal 2000 Year of Make: 1989 Condition: functional Siemens control system Boiler capacity: 120 litres Incl. 2 tank cars Incl. 2 tools Accessories of choice and availability

Table dimensions ( x-y/mm) 2150 x 1200 Slide Dimensions X-Y (mm) 2000 x 1200 Stroke (mm) 300 Slide Adjustment (mm) 200 Stroke per minute 5 - 50 Lateral window dimensions ( x-y/mm) 800

Key data: 242 t

This is a 242 Ton x 12ft and deep 16" throat depth with 5 axis machine with auto crowning, a good variety of dies and punches including 2 bolsters and a nice 4way. Segment acute punches and dies also available with this machine. It is clean and fully operational. Machine is wired 208 3 phase.

Key data: 3000 kN, 762 mm, 200 °C

Condition: Factory Rebuilt Model: 3000kN BIPEL Press Application: Compression Moulding Mode of Operation: Manual and Semi-Auto Frame structure: Steel plate frame Cylinder type : Double acting Push back cylinder(s) : Pressing force kN: 3000 Pull back force at circuit pressure kN: 300 Operating height mm : 820 Stroke mm : 610 Daylight between Tables mm : 1205 Table size L -R mm : 785 F-B mm : 890 Opening speed mm/sec: 200 Pressing speed mm/sec:  ...

Key data: 3000 kN

Bed Size: Left to Right 785mm 30 1⁄2 in Front to Back 890mm 35 in Daylight Between Tables 1206mm 47 1⁄2 in Daylight Between Heated Platens 841mm 33 1⁄8 in Heated Platen Sizes(Up To) 760mm x 610mm 28″x24″ Max Working Platen Temperature 220°C 428F Main Ram Stroke(Up To) 610mm 24 in Hydraulic Circuit Pressure 210 Bar 3000 PSI Main Ram Pressing Force 305 T 300 Ton Maximum Pummel Diameter 102mm 4 in Closing Speed(Up To) 150mm/s Opening Speed(Up To) 120mm/s

General SKU292T670 LocationBarneveld CEcheck MakeVan Tongeren kennemer BV Main Features Motor3 KW Length7000 mm Inlet diameter430 mm Specified Features - Horizontal screw conveyor Horizontal conveyor screwcheck Tube-typecheck Diameter420 mm Length7000 mm Shaft diameter260 mm Pitch200 mm Inletdia. 430 mm Outletdia. 221 mm Max. temperature100 °C Motor3 kW 219-241/380-420 Volt (Ex) Height between in- and outlet5890 mm MaterialStainless steel 1.4301 (304), Stainless steel 1.4401 (316) With jacketcheck General TypeZ43430 Mach.No.T4404 Year of construction2015 Floorspace0,7x8,9 m Total height0,9 m ATEX designedcheckOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherSolvents ...

General SKU292T671 MakeVan Tongeren kennemer BV Mach.No.Z43721 / T4400 Year of construction2017 Main Features Motor1.1 KW Length5000 mm Inlet diameter175 mm Specified Features - Horizontal screw conveyor Horizontal conveyor screwcheck Tube-typecheck Diameter380 mm Length5000 mm Between inlet and outlet4650 mm Shaft diameter160 mm Pitch245 mm Inletdia. 175 mm Outletdia. 180 mm Motor1,1 kW 219-241/380-420 Volt (Ex) With variable speed drive(Ex) Screw speed27 rpm. (34 895 l/h) MaterialStainless steel With jacketcheck General LocationBarneveld Floorspace6,5x0,7 m Total height0,7 m Weight700 kg CEcheck ATEX designedcheckOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherSo ...

General SKU292T672 LocationBarneveld CEcheck Main Features Motor1.1 KW Length1900 mm Inlet diameter175 mm Specified Features - Horizontal screw conveyor Horizontal conveyor screwcheck Tube-typecheck Diameter360 mm Length1900 mm Shaft diameter170 mm Pitch255 mm Inletdia. 175 mm (2x) Outletdia. 140 mm Motor1,1 kW 219-241/380-420 Volt With coverscheck MaterialStainless steel General MakeVan Tongeren kennemer Mach.No.Z43752 Year of construction2015 Floorspace3,2x0,55 m Total height0,6 mOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsE-waste & metalHorizontal screw conveyorsFood additivesSugarLubricants & oleoDairyAnimal f ...

CNC Lathe Tongtai Topper TNL - 100 TL / Fanuc OT -CE marking -Fanuc OT control -Max. turning diameter 388mm -Max. turning length 580mm -Rod passage 51mm -Hollow spindle diameter 62mm -Speed 45 - 4500 rpm -Turret / 12 stations -Tool -Eye / Tool Measurement -Tool shank 25mm - Holder diameter 32mm - Axis movement X/Z 200 & 600mm -Rapid traverse X/Z axis 20 & 24 m/min -Spindle motor 15 KW -Tailstock -Footswitch -Machine feet -Chip conveyor -Documentation Dimensions: LxWxH 2.6x1.8x2 meters / Weight 4700Kg

Tongtai / Topper TMV - 720 A / Fanuc OI-MD Vertical Machining Center -CE marking -Year of construction 2011 -Control Fanuc Oi-MD -Travel X / Y / Z 720x480x530mm -Distance spindle nose / table 100-630mm -Table size 800x480mm -Max. table load 500Kg -Spindle holder BT-40 -Spindle speed 8000 rpm -Spindle motor 7.5 / 5.5 KW -Rapid traverse X / Y / Z each 48 M/min -Feed speed 1-10000 MM/min -Tool changer / 24 compartment -Tool change time (T-T) 3 sec. -Max. tool weight 7Kg -Max. tool diameter 80mm -Work light -Coolant device -Chip conveyor -Electric handwheel Dimensions: LxWxH 2.8x2.2x2.8 meters / Weight 4400Kg

Type: SCM160 - set van 4 vijzels met elk een hefvermogen van 16 ton - Hefslag: 2000 mm -Snelheid omhoog/omlaag: 230 mm/min - 3 kW vermogen per aansluiting - totaal vermogen: 24 kW Elke krik is uitgerust met een absolute encoder voor het detecteren van de hoogte, rotatie en diagnose- en veiligheidssensoren om belasting, versleten moeren en obstakels onder het aambeeld te detecteren. Elektrisch systeem met standaard aansluiting en computergestuurde bedieningseenheid, gemonteerd op een verrijdbare trolley.

planetary mixer Find more here - .ucymachines/ Contact us at - sales@ucymachines

Konecranes 5 ton x 30 000 mm Kind of: overhead travelling crane Capacity: 5 ton Span: 30 000 mm Radiocontrol: radio control Numbre of riggers : single rigger

Konecranes 5 ton x 30 000 mm Kind of: overhead travelling crane Capacity: 5 ton Span: 30 000 mm Radiocontrol: radio control Numbre of riggers : single rigger

Stahl takel SH 6050-25 4/1 L3 klasse FEM M5 (2M) Kind of: overhead travelling crane Capacity: 20 ton Span: 30 000 mm Motorpower: 30 kW Tackle speed: 1 & 6,3 m/min Rotationspeed: 5 & 20 m/min Displacementspeed: 10 & 40 m/min Weight: 22 ton Radiocontrol: radio control Numbre of riggers : double girder

Konecranes 10 ton x 28 470 mm Kind of: overhead travelling crane Capacity: 10 ton Span: 28 470 mm Motorpower: 17,7 kW Tackle speed: 1,3 & 8 m/min Rotationspeed: 1 > 20 m/min (frequency controlled) Displacementspeed: 1 > 63 m/min (frequency controlled) Weight: 16 ton Radiocontrol: radio control Numbre of riggers : double girder

CTX-type takel - twee vaste hefsnelheden - De beweging van de kraan en de takel zijn frequentie gestuurd. - klasse FEM M5 (2M) Kind of: overhead travelling crane Capacity: 10 ton Span: 28 470 mm Motorpower: 17,7 kW Tackle speed: 1,3 & 8 m/min Rotationspeed: 1 > 20 m/min (frequency controlled) Displacementspeed: 1 > 40 m/min (frequency controlled) Weight: 16 ton Radiocontrol: radio control Numbre of riggers : double girder

CTX-type takel - twee vaste hefsnelheden - De beweging van de kraan en van de takel zijn frequentie gestuurd. - klasse FEM M5 (2M) Kind of: overhead travelling crane Capacity: 10 ton Span: 28 470 mm Motorpower: 17,7 kW Tackle speed: 1,3 & 8 m/min Rotationspeed: 1 > 20 m/min (frequency controlled) Displacementspeed: 1 > 40 m/min (frequency controlled) Weight: 16 ton Radiocontrol: radio control Numbre of riggers : double girder

CTX-type takel - twee vaste hefsnelheden - De beweging van de kraan en de takel zijn frequentie gestuurd. - klasse FEM M5 (2M) Kind of: overhead travelling crane Capacity: 20 ton Span: 28 470 mm Motorpower: 22,4 kW Tackle speed: 1,1 & 6,3 m/min Rotationspeed: 1 > 20 m/min (frequency controlled) Displacementspeed: 1 > 40 m/min (frequency controlled) Weight: 18 ton Radiocontrol: radio control Numbre of riggers : double girder