tire recycling used for sale

RMH G 60 New Manufacturer: RMH Roller cutting width: 2000mm Roller cutting height: 1200mm Dimensions ( L x W x H ): 3100 x 1300 x 2500 mm Drive: 11 KW Manual and automatic working procedure Two-handed operating system Cutting force: 2 x 30 cylinders (60 tons cutting force) Total weight: 4200kg

Waste separation plant - unpacking plant Food Waste Disposal plant / separation and separation plant for food & industrial waste. The innovative wet-separation plant for the treatment and separation of mixed, packaged and unpackaged waste. This plant is a solution for the settlement of the TA municipal waste of the Waste Disposal Ordinance, which prohibits the disposal/landfilling of untreated, organic, biodegradable municipal waste since 1 June 2005. By processing and separating organic and/or municipal waste, we reduce the pollution and provide a larger volume of high-quality biomass for recycling. If waste has previously been landed untreated, such waste is processed and recycled. The organic components are returned as compost or biomass for the production of renewable energies, which leads to a significant reduction in landfilling and thus the associated methane emission.  ...

Mini roller cutter Our range now also includes machines for processing residual rolls, for example from paper production, the packaging industry, printing houses, textiles, aluminium rolls, film rolls, etc. These heavy rollers cannot be processed efficiently and safely with the normal cutting systems, but with these special "guillotine" roller cutters this is no longer a problem. The mini roller cutter can be seen here as a standard version. We offer the Mini roller cutter in version G20 / 25 and G30. All data can be customized according to the customer's wishes. (Sensors | Protective grille | Light barriers | colour, etc.) Roll width: max. 700 mm Roller height: max. 800 mm Drive: 5.5 Kw Cutting force: 25 T cylinders Weight: 1200 kg Working cycle: 65 seconds Including automatic return: Important roll cutting width and roll cutting height can be adjusted as desired. Dep ...

1 piece of factory-new mobile residual concrete recycling plant RECYCLING PLANT for processing fresh concrete surpluses MREC 15 - MOBILE VERSION Manufacturer: RSM Type: MREC 15 Year of construction: factory new Washout capacity approx. 15 m³/h WAM washout screw Separation cut 0.3 mm - 1.00 pieces filling funnel - 1,00 pieces high basin (25m³) - 1,00 pieces intermediate pool (2m³) - 1.00 pieces of waste water mixer with console - 2.00 pieces of submersible sludge pumps - 1.00 pieces submersible pump - 1.00 pieces of control for residual concrete recycling plant - 1.00 pieces of flushing gallows - etc. The final painting is carried out according to customer requirements. Price on request Delivery time: immediately available Offer and prices are purely net from location Intermediate sale reserved, errors and/or misrepresentation reserved,

1 used residual concrete recycling plant BIBKO ConTec, year of construction 1992, without control, spare parts available, rep. needy, sale ex location Upper Franconia

TECHNICAL SPECIFICATIONS Manufacturer: STETTER (Germany) Designation: Concrete recycling plant Type: RA 20 Year of construction: 1994 Normal concrete washout capacity: 20 cbm/h Required rinsing water volume: max. 15 cbm/h grain size: 63 mm Separating cut: 0.20 mm Drive power washing drum: 2 x 4 kW Rinsing water pump washing drum: 2.36 kW SPECIFIC COMMENT - incl. washout pump - Operational and fully functional - Excl. agitators and dirty water pump

1 used BIBKO RAM 16, built in 1996. without control and in need of rep., from stock, immediately available, free loading

We sell a used system of recycling machines with the following components (built in 2004): - Chip crusher type RS 300 E with coarse part outlet (Steimel) - Scraper belt conveyor with torque cut-off (DGS) - Chip centrifuge AZ - 250 (ARP) - Vacuum valve VSS 100 (ARP) - Pump sump (ARP) - Vibrating sieve -Switchboard The facility is fully functional and can be picked up.

TBL SREC 12 - residual concrete recycling plant - COMPLETE - with STETTER RA 12 Washing drum factory new 0.0 operating hours with guarantee including control unit including feeding table Includes 3 submersible pumps (1 piece submersible pump, for truck mixer washing pipe 2.2 kW, 1 submersible pump for returning the recycling water to the washing drum 2.2 kW, 1 submersible pump for draining the recycling water to the water dosing hopper of the concrete mixing plant 3 kW) Washing capacity for normal concrete 12 m3/h Washing capacity for normal mortar 5 m3/h max. particle size 63 mm Separation cut 0.2mm Rinse water volume (adjustable) 7-12 m3/h Rinse water connection for washing drum DN 50 Drain pipe DN 200 Water content of the drum (fill level) 2 m3 Washing drum follow-up time (adjustable) 20 min If required, including delivery, assembly and commissioning Pri ...

HDPE Film Washer Year of construction 2016 0 operating hours (never went into operation) Manufacturer: NEUE HERBOLD, D-74889 Sinsheim composed of: Wet granulator type SM 450/600-S5-2 Friction washer / friction separator type FW 560/3000 Transport screw Separation tank (float-sink separation) type TB 500 mechanical dryer type TM 1005 Extraction system type MFT 55/500 Fine Material Separator Type HS 500 E-circuit

Dryer / Centrifugal Dryer / Dry Cleaner Can be used for pre-shredded plastic waste (hard plastic, films), Throughput depending on the type of material approx. 0.5-2 t/h Drive power 30 kw

Chip press for the recycling and compaction of plastic chips (which are shredded if necessary) from machining by converting them into cylindrical briquettes. When it comes to disposing of PU or EPS chips, the Styrotec briquetting press saves a lot of money and increases profits by turning waste into a resource. The chip press can be installed both indoors and outdoors. Briquette diameter: 55 mm Hopper dimensions (diameter): 1000 mm Throughput: 30-75 kg/h Motor pump power: 5.5 kW Dimensions of the briquetting press: 1,100 x 1,460 x 1,600 mm Weight: 565 kg

Complete plastics recycling plant in operation. PRICE MACHINE WITH 2 PISTON FILTERS: 520.000€ PRICE MACHINE WITH 1 PISTON FILTER AND A 1 BRITAS FILTER MODEL ABMF 1050-12: 660.000€ 8,500 HOURS OF WORK. IN PERFECT CONDITION. PRODUCTION /HOUR: 900/1,000 KGS. MATERIAL: LDPE, QUALITIES 98/2 AND 99/1 AFTER 1 WASH.

Complete Britas filter with many spare parts. Off site, available immediately.

UNOTECH package press from 2018 with approx. 13 - 14,000 Bh. and a sufficient package of wearing parts. the baling press is designed for baling of metal cans and metal blanks Find more here - /

Scrap shears and a package compactor = machines are from the 1960s Find more here - /

Husmann HL I 1222 ES single-shaft crusher: Working speed max. 35 rpm, 28 knives Knife width 100 mm. Outer diameter of shaft 660 mm, shaft length 2,260 mm Cutter opening 1,200 x 2,200 mm Electro-hydraulic drive with 400 bar system pressure Drive power 200 kW Torque 90,000 Nm to 110,000 Nm Throughput capacity 40 t/h Hopper made of highly wear-resistant steel Discharge conveyor belt with magnetic separator and cleaning brush + Günther starscreen: MULTISTAR 2-SE Screen deck: L: 4,000 mm; W: 1,200 mm; centre distance 266.5 mm. sieve section 60...90 mm Drive 2 x 4 kW Throughput capacity 15 t/h Total plant run only 10 operating hours! Year of manufacture 2020 Find more here - /

Machine Details: - Type: REH 500 eco - Year of Manufacture: 2017 - Quantity: 4 units - Power Output: 500 kW - Fuel: Fermentation residues (Gärreste) - Maximum Operating Pressure: 2.5 bar - Maximum Operating Temperature: 105°C - Water Capacity: 3200 liters - Electrical Connection: 400V, 63A - Application: Combustion of fermentation residues; other fuels may be possible - Accessories: Chimney, ash discharge, dust silo, and filter Brief Description: Rotary kilns designed for the combustion of dried fermentation residues. Find more here - / Contact us at -

For sale: Paper recycling and sorting machine with integrated reversible conveyor belt system 1) Paper Processing Machine Manufacturer: Hartner Year of Manufacture: 2013 Operating Hours: 3500 2) Reversible Conveyor Belt Manufacturer: Hillebrand Model: 4 GB 1400 Find more here - / Contact us at -

Recycling plant/recycling plant General information • Plant type: PET sorting and washing system for the production of PET flakes • Manufacturer: STF-Maschinen & Anlagenbau GmbH • Year of construction: 2023 • New value EUR 4,970,000.00 • Market value (at location): EUR 3,052,000.00 • Installed in two connected halls incl. foundations • Plant currently not in operation (standstill since 11/2024) Technical key data • Max. configuration: 2,000 kg/h • Max. achievable output in continuous operation: 600 kg/h • Output in test run with good material: >1,500 kg/h • Energy requirement: 650-680 kWh (without hot washing system) Stages of the procedure 1. Feeding of PET material (pressed bales) 2. Coarse sorting via sieve drum 3. Magnetic separation of metallic impurities 4. 2-stage sensor sorting (materials) 5. Manual sorting via sorting belt 6. Mill and  ...

Manufacturer: Wackerbauer Model: TM 75 Year of Manufacture: 2013 Type of Machine : separation mill Food waste (out-of-date and/or packaged food, manufacturing waste) from the food industry, organic waste, etc., is conveyed into the separation mill via a conveyor system. There, the material is unpacked, separated from impurities, and ground into a virtually impurity-free substrate with a two-dimensional grain size of max. 12 mm. Find more here - / Contact us at -

Manufacturer: EREMA Model: 1514T Application: Designed for Post-Industrial processing (no filters or gas extractor). Usage: Very few operating hours, previously used with BOPP edges. Technical details: - Unique 140mm spindle - Nominal capacity: 1,200 kg/h Included equipment: - Wet cutting head unit - PREVIERO mill - Metallic structure (compatible with mill if installation height allows) Find more here - / Contact us at -

Manufacturer: Mogensen Model: AF091 Year of Manufacture: 2003 Type of Machine : Optical Flake sorter Find more here - / Contact us at -

GAMMAMECCANICA Compac 125 mm. Construction year 1998 Including Loading conveyor belt, Metal detector, Compactor with driven haul off for reels, master dosing unit Engin Plast, Extruder 125 mm diam. 36 L/D with degassing pump d.c. Ansaldo drive 197 kW, Total installed power 501 kW motor, BD plast non-stop screenchanger diam. 200 mm, hydraulic power station, water ring pelletizer M 8500, Electrical cabinet, Type of machine: GAMMAMECCANICA PLASTIC RECYCLING LINE 125 mm.

Manufacturer: BJORN EVAPORATOR Model: ELT 200 Year of Manufacture: 2004 The evaporator was installed and commissioned and dismantled in October 2022 (Stored , not operational) Electrical Specifications: - Voltage: 3 × 400 V + 0 + Earth - Frequency: 50 Hz - Maximum Fuse: 3 × 150 Amp Find more here - / Contact us at -

Manufacturer: Lundberg ‎ Model: WasteTech 200 Year of Manufacture: 2022 WasteTech 200 All-in-one Units are designed to capture, convey, cut and collect edge trim waste from up to 8 process machines. Configuration of Granulator(s) is customised to the material and number of process machines and disposal can be in a sack, TubeBag, bigbag or compactor. Specifications: - 4 cutting motors - Maximum air capacity: 3,000 m³/hour (1,770 CFM) - Maximum pipe size: Dia. 200 mm (8") transfer - Maximum suction distance: Up to 30 m (100 feet) - Size (LxWxH): 2,535 x 1,300 x 3,290 mm (8’-4” x 4’-3” x 10’-10”) - Weight: 495 kg (1,090 lbs) - Motor ventilator: 7.5 kW (10 HP) - Power: 3 Phase, 230-460V, 50-60 Hz - Sound: 68–72 dB (A) - Colour: RAL5010 Find more here - / Contact us at -

used screening machine, function-tested, immediately available

Technical data: Power connection: 2 x 1.5kW Electrically inserted into the baler's feed hopper If you have any questions, please call us: +48 696 072 985

AMB pre-shredding machine type 753 The plant is already completely dismantled, incl. the hydraulic aggregates and would be ready for pick-up The machine was built in 2004 and was used by us for the pre-shredding of household and bulky waste. It then served as a backup from 2010 to 2022. We have already dismantled the machine and hydraulic unit and stored them on site. Before dismantling, we carried out another test run - without any problems. As the plant had already been dismantled, there was no time pressure. As part of the optimization of the system, the manufacturer AMB installed two additional drives for the shafts - as can be seen in the pictures. Find more here - / Contact us at -

An untested vacuum distillation unit/solvent recycling unit Lömi for the recovery of organic solvents is available. Volume: 50l, operating volume: 30l, distillation capacity range: 8l-20l/h, max. operating temperature: 250°C, protection: EX, vacuum pump type: LÖ/V 6, max. vacuum pressure: 80mbar. Machine dimensions X/Y/Z: approx. 1450mm/600mm/1800mm, weight: approx. 300kg. An on-site inspection is possible.

This used PY-D continuous distillation unit converts waste engine oil, pyrolysis fuel oil, and heavy crude oil into non-standard diesel fuel with a high yield of 80–90%. The horizontal-type reactor operates at normal pressure using a hot-air heating method and cycle-water cooling, making it a reliable, low-maintenance solution for industrial waste oil recycling. Emission control is handled by a new DE-sulfurization smoke scrubber system. Full Technical Specifications - Equipment Model: PY-D - Suitable Raw Materials: Waste engine oil, Pyrolysis fuel oil, Crude oil - Structure: Horizontal Type - Daily Capacity: 5 – 6.5 MT - Work Pressure: Normal Pressure - Oil Yield: 80% – 90% - Power Consumption: 18 kW/H - Cooling Method: Cycle water - Condensers: 4 pieces of Vertical condensers - Emission Treatment: DE-sulfurization Smoke Scrubbers - Heating Method: Hot Air - Type of Installation ...

Technical data Maximum pressure: 50 tons Year of Make: 1994 Pressing force: 7.14 kg/cm² Number of bindings: 3 horizontal Channel cross-section: 1000 x 700 mm Dimensions of the tailgate: 145 x 95 cm Bale weight: do 500 kg Weight: approx. 10 tons Power connection: 400 V/ 45 kW Bale tying: automatic Open hopper allows filling with the conveyor belt. Knife on the press plate and on the frame of the press to cut off the excess material. Automatic regulation of the light from the channel. Automatic binding with wire Choice of the length of the finished bale Press plate stably guided on the large rollers Large flaps of the bale chamber for easy maintenance

ZENO shredder type ZTLL 3000 x 2500 For crushing PVC window frames Capacity approx. 10 t/h with screen perforation 50 mm Ø Inlet cross-section: 3000 x 2500 mm Drive: 2 x 132 kW, gearbox with torque cut-off Rotor flight circle: 750 mm Rotor speed: approx. 80 rpm Rotor design: 4 rows (180 pcs.) positive inserts, 80 x 80 x 45 mm on tool holders Rotor Bearing: Pillow Block Bearing Rotor body: hardfaced (wear protection) Water spraying funnel: flat jet nozzles, à 3 l/min at 3 bar Screen design: solid screen basket, reinforced with ribs, with screen quick-change device Counter blade: with cutting gap adjustment and foldable Side walls in the rotor area: replaceable, Hardox material Hopper: 1300 mm high, flared on 4 sides, double-walled with concrete filling, without lid Machine weight: approx. 43,000 kg Control cabinet (loose, for controlling the machine, incl. soft sta ...

For sale: a complete waste recycling plant, fully equipped with automated sorting,shredding, separation, and material recovery systems. Overall Process Summary 1. Feeding and battery detection (WeSort AI) with pre-shredding and screening 2. Ballistic separation into flat fraction, rolling fraction, and fines 3. Multiple NIR sorting stages (P2000 / PV2000 / P2800) for PVC, EBS, Wood, PP/PS/PE/EPS 4. X-Ray mineral sorting, ISS Eddy Current separation, Zig-Zag air classification, overband magnets, flip-flow screening 5. Post-shredding with Lindner Komet and SRF dosing with secondary shredding 6. Final SRF/EBS discharge with ferrous and reject handling 7. Manual sorting cabin with dust extraction (Schuko filter system) 1. Feeding and Pre-Treatment - Feeding crane - Feed bunker - Intermediate feed conveyor and screen feed conveyor - Screen and screen discharge conveyor - Analysis  ...

Type - HKV Manufacturer - Ludden & Mennekes Year of manufacture - 2019 Fits 4-wheel MGB flat-top trailers Stationary EXW Vilnius - 5100 EURO

Compactor for SALE - good price! Producer - Pottinger Type - MP1900 Year of production - 2004 Power - 5.5 kW Condition - used in working condition (without reconstruction)

For a full 3D tour of the installation: https://my.matterport.com/show/?m=v6b3Sjbw3xB Complete \"Bollegraaf\" plastic sorting installation; Equipped with Coarse/for shredder \"Lindner\" type Micromat 2000, (2018), 132 kW, equipped with 68 chisels on shaft, reducer \"Stiebel\" (2018), 45,000 Nm/682 kg, single shaft principle, odometer reading 190; Fine shredder \"Lindner\" type Komet 2200 (2019), 2x 132 kW, equipped with 60 chisels on shaft, closed receiving hopper, single shaft principle, odometer reading 910; Sorting and screening installation, \"Lubo\" type AWS 330/2540/7500, equipped with color sorter, \"Tomra\" Autosort unit, (2018), working width 2800 mm, roller screen with sorting belt, under collection hopper and discharge belt, cross discharge conveyor belt, type HBGT 250/1000, (2022), equipped with Nir +color detection, EM 3 sensor, ultra high resolution, minimum detect s ...

Power: 2 × 55 kW (110 kW) Power supply: 400 V / 50 Hz Rated current: 460 A Protection class: IP54 Year: 2004 Manufacturer: Artech Recyclingtechnik GmbH Serial No.: 95.55.04.01 Weight (kg): 17700 Equipment: Hopper with hydraulic lifter, double SEW-Eurodrive drive, control cabinet, technical documentation. Remarks: Machine totally overhauled, knives replaced. Auction-ID: A1-48233-1

Complete, fully integrated wood pelletizing and shredding line, delivered new in May 2023. Originally engineered and supplied as a turnkey solution. The plant processes A1 waste wood and single use pallets into DIN compliant heating pellets, covering the full process from automatic material feed through two stage shredding to pellet pressing, cooling and bagging. Year of manufacture: 2023 Condition: Used, like new Manufacturers: AMIS, SPANEX, Grecon, ECOKRAFT Technical Data - Purpose: processing of A1 single use pallets, ideal input moisture 10 to 12 percent, into heating - pellets with 6 mm die - Tested output: approximately 460 kg per hour total, 230 kg per hour per ECOKRAFT LP22 pellet - press, using 2 percent corn starch as binder, dust content under 3 percent - Total connected load: 275.5 kW - Required supply fuse rating: 500 A at 400V - Footprint: approximately 23 x 18.5 meter ...

Manufacturer: MACFAB Model: 75 Baler (BMF75 Compact HT) Type of machine: Baler Year of manufacture: approximately 5 years old Color: RAL 6018 Weight: 270 kg Dimensions: 1,040 x 2,300 x 720 mm Power supply: 220 to 240V Included accessories: hand truck for bales, 4 refill packs for lashing straps Find more here - / Contact us at -

3-point lifting connection, PTO drive including PTO, 2x hydraulic connection, 12V control box, pressure roller adjustable in height, Auction-ID: A1-47379-124

Press Type: Twin Cavities Mold Type: Segmented Type of Tires: Passenger and Light Trucks Bead Diameter Range: 16â â 20â Closing force: 650,000 Lbs / 3680 KN Heating System: Steam Bladder System: Hydraulic Water Max. Pressure: 20 Bar Power Supply: 18.5 KW, 380 V / 50 Hz Loader: Available Controls: Simatic S7

The BTS-Tyre Packing Machine Gen.2 is ideal for used tyre companies with large tyre volumes. The triple machine is the perfect solution for cost-effective disposal or resale of second-hand tyres. By doubling or tripling the tyres you achieve an enormous volume reduction, the available storage and loading capacity, as well as the permissible transport weight can be used much more efficiently. Pressing cylinder: Pneumatic Pressing force: 1.23 kN, adjustable Machine size: 1250 H x 1930 W x 660 D mm Machine weight: 93 kg Transport size: 1250 H x 1200 W x 800 D mm Working height: 800 - 1020 mm, adjustable Power supply: Air, up to 10 bar / 145 Psi Working pressure: 6 - 8 bar User-friendly and safe two hand control Strong and long-life design High-performance pneumatic cylinder Ball bearing roller guides Adjustable working height Low noise level by silencer Air qu ...

The BTS-Tyre Packing Machine Gen.2 is ideal for used tyre companies with large tyre volumes. The triple machine is the perfect solution for cost-effective disposal or resale of second-hand tyres. By doubling or tripling the tyres you achieve an enormous volume reduction, the available storage and loading capacity, as well as the permissible transport weight can be used much more efficiently. Pressing cylinder: Pneumatic Pressing force: 1.23 kN, adjustable Machine size: 1250 H x 1930 W x 660 D mm Machine weight: 93 kg Transport size: 1250 H x 1200 W x 800 D mm Working height: 800 - 1020 mm, adjustable Power supply: Air, up to 10 bar / 145 Psi Working pressure: 6 - 8 bar User-friendly and safe two hand control Strong and long-life design High-performance pneumatic cylinder Ball bearing roller guides Adjustable working height Low noise level by silencer Air qu ...

approx. 100.11 m tire racks META, tire rack, wheel racks, workshop rack, storage racks, immediately from stock Data: H : approx. 200 cm D : approx. 40 cm L : approx. 100,11 running meters Shelf offer 100,11 running meters ( 87 fields ) consisting of: 88 x stand approx. 200 x 40 cm, disassembled (incl. 2 x stand & 2 x cover cap). 522 x traverse approx. 115 cm. 1044 x tapping screw 4.8 x 13. Manufacturer: META. Load: 150 kg per compartment, with evenly distributed load. Levels: 3 x storage levels. Surface: sendzimir galvanized. New goods from stock. Made in Germany. 100% quality at the best price. The pre-assembly of the frames can be done by us for a small surcharge of 2 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 7350,00 € net plus legally valid VAT You will receive an invoice with VAT.

approx. 34.56 m tire racks META, tire rack, wheel racks, workshop rack, storage racks, immediately from stock Data: H : approx. 200 cm D : approx. 40 cm L : approx. 34,56 m Shelf offer 34,56 running meters ( 30 fields ) consisting of: 31 x stand approx. 200 x 40 cm, disassembled (incl. 2 x stand & 2 x cover cap). 180 x traverse approx. 115 cm. 360 x tapping screw 4.8 x 13. Manufacturer: META. Load: 150 kg per compartment, with evenly distributed load. Levels: 3 x storage levels. Surface: sendzimir galvanized. New goods from stock. Made in Germany. 100% quality at the best price. The pre-assembly of the frames can be done by us for a small surcharge of 2 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 2637,00 € net plus legally valid VAT You will receive an invoice with VAT.

Technical data: Shelf height: 1,972 mm Shelf depth: 400 mm Total length: approx. 2,160 mm Consisting of: 3x Stand 1,972 x 400 mm - S1 12x Trusses 1050 mm long - 235 kg special load with evenly distributed load 24x Hangout fuses 6x Metal feet 6x Cover caps - Plastic These shelves are also available in other sizes. Let us create a free offer. The pictures do not correspond to the scope of the offer but are only used for illustrative purposes ! Shipping possible on request.

approx. 69.06 running metres Tyre racks META, tyre racks, wheel racks, workshop racks, storage racks, immediately from stock Data: H : approx. 200 cm D : approx. 40 cm L : approx. 69,06 running meters Shelf offer 69,06 running meters ( 60 fields ) consisting of: 61 x stand approx. 200 x 40 cm, disassembled (incl. 2 x stand & 2 x cover cap). 360 x traverse approx. 115 cm. 720 x tapping screw 4.8 x 13. Manufacturer: META. Load: 150 kg per compartment, with evenly distributed load. Levels: 3 x storage levels. Surface: sendzimir galvanized. New goods from stock. Made in Germany. 100% quality at the best price. The pre-assembly of the frames can be done by us for a small surcharge of 2 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 5247,00 € net plus legally valid VAT You will receive an invoice with VA ...

Technical data: Shelf height: 2,500 mm Shelf depth: 400 mm Total length: approx. 12,160 mm Consisting of: 11x Shelf stand 1,972 x 400 mm - S1 60x Trusses S-3, 1200 mm long - 320 kg special load with evenly distributed load 120x Hanger fuses 22x Metal feet 22x Cover caps - Plastic These shelves are also available in other sizes. Let us create a free offer. The pictures do not correspond to the scope of the offer but are only used for illustrative purposes ! Shipping possible on request.

approx. 15 running metres Tyre racks META, tyre racks, wheel racks, workshop racks, storage racks, immediately from stock Data: H : approx. 200 cm D : approx. 40 cm L : approx. 15 running metres Shelf offer 15 running meters ( 13 fields ) consisting of: 14 x stand approx. 200 x 40 cm, disassembled (incl. 2 x foot & 2 x cover cap). 78 x traverse approx. 115 cm. 156 x tapping screw 4.8 x 13. Manufacturer: META. Load: 150 kg per compartment, with evenly distributed load. Levels: 3 x storage levels. Surface: sendzimir galvanized. New goods from stock. Made in Germany. 100% quality at the best price. The pre-assembly of the frames can be done by us for a small surcharge of 2 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 1158,00 € net plus legally valid VAT You will receive an invoice with VAT.