tire recycling used for sale

Starting product :, car, 4x4, truck tyres, agri tyres max diam. 1.400 mm and max thickness 300 mm., Final product : 80 - 100 mm.chopped (for inceneration), 4 - 6 mm.crumbs, 2 - 4 mm.crumbs, 1 - 2 mm.crumbs, 0,5 - 1 mm.crumbs, 3 operators per shift, required space : about 30 x 22 mt., calculated on a 220 days/year 8 h/day = 3.520 T/year - 16 h/day = 7.040 T/year, Harmonized steel as a residual product., Average throughput rate of granulate : 2 Ton/h in input (throughput rate depends on feeding rate and on the kind of tires), installed power : about 650 kw used at 65%, Delivery time : about 6 months from confirmation, Main machines:, Debeader - available manual (20-25 tyres/h) or automatic (45-50 tyres /h), for truck tyres only, feeding conveyor belt, Dual shaft shredder 1.500 mm wide, transport belt, discs screen, transport belt, transport belt for fine material, transport belt to return  ...

Manufacturer: Brunotte & Niemeyer Year of Manufacture: 1968 Type of Machine : Hot cure tire press - Open/close system with hydraulic spindle - Plc cabinet - Press on it self can load tyres by own boards - Air max: 16bar pressure inside - Standard working pressure 8 bar - Hydraulic pump - Heating: Steam - Accessories: optional 24R20.5 XS mould Find more here - / Contact us at -

CANDY RECYCLING AD 2000 made in 2015 for recycling of Rework from hard candy production suitable also for jelly, toffee, lollies, fondant even wrapped products result after recycling: completely transparent and neutral sugar-glucose syrup-water solution consisting of: dissolving machine intermediate/buffer tank, volume 2000 L with platform horizontal rotary drum vacuum filter unit year 2015 very good condition

Plastics Recycling Extruder PP=900-1000kg Complete Line

Ermafa twin screw extruder B 2.95-35 D 1992/1995 -Extruration plant for recycling -with hot-tee, Filter -Drying centrifuge, -Degassing plant, -storage silo, -discharge silo, -Chain elevator. -900-1000 kg/h PP

Ladies and gentlemen, Pictures and further information on request. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire transport process is carried out at the buyer's own expense and at the buyer's own expense. We cannot be liable for personal injury and damage to property in the case of dismantling by the buyer in this context. Place of jurisdic ...

Ladies and gentlemen, can be offered: A conveyor belt system for conterminized products All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the seller until full payment. intermediate sale, other use, Exploitation and error are expressly reserved. Yours sincere ...

Ermafa Type: RA 1200-350 , Agglomerator Control: Siemens S6 Built: 1995 Dimensions and weights Dimensions LxWxH m: 1.5 x 1.5 x 3.36 Machine Weight Kg: 4250 Other Motor-Three-phase cage rotor motor Performance-355 KW Speed-1488 rpm Voltage-380/660 V;50 Hz Degree of protection-IP 55 Type-IM V3 Mode-S 6 Mixed fraction from shredding 700-1100 kg

Zig Zag Air Sifter Sizes/ wides from 200mm - 1800mm Precondition for the separation are differences in the material like: - Different sizes of particles - Differences of the density - Differences in the surface condition of the particle - Differences in the form of the particle - Grain size 0.1mm – 40mm, (bigger particles are possible with a special design) We are the manufacturers of these plants and we build Zig Zag Sifter Plants in different sizes. In order to make you a definite offer we need to know some points: 1. What material you want to separate? 2. Grain-size of the material? 3. Bulk weight kg/liter of your material. 4. We have technical center at our house, where we can test your material.

To separate and sort after the specific weight from light and heavy fraction. Useable for grain, aluminium/plastic, rubber/textile, cable-recycling, etc. Type and size are choiceable, depending on the product and throughput. At constant machine length, it is possible to choose between working width from: 450mm, 600mm, 900mm.

Ballshaping- and Delaminationmill Molinator for fine delamination! Diverse Types: RW VKR16/3 / 22-37kW and RW VKR 22/3 / 75-110kW Input Composite Material Examples: Regrind from hair-wire, printed circuit boards, electronic circuits, other composited material. Al / Plastic, Cu / Plastic, Cu / Glass fibre, ABS / Plastic fibres, etc. Type choice: depending on the material / depending on layer thickness / depending on test‘s / according to the desired throughput. Description Molinator: In the inner acts very high forces (High acceleration / high relative-speed)! Bigger parts will be delaminated. Composite-material separates at the phase of boundaries. Metals will be ballshaped. Plastics depending on the specifications stays fluffy” or will be grinded. These effects besides the desired delamination, are helpfully for the separation and are exactly coordinated to our sepa ...

To sieve dry material: like flour-, grainy-, and granule-shaped material. Free running sieve case hanging in a massive framework With an automatic sieve ball cleaning. Sieve-layers in a simple way interchangeably. Applicable to sieve all floury-, grainy materials in dry condition. Sizes of Wide 500 – 1500mm / Lengths 1200 – 2400mm Sieve layers 2 to 4 layers, grain

Slow-running robust single-shaft shredder Suitable for the pre-shredding of various materials without solid stuttering materials. Application: Crushing of industrial and commercial materials, films, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, mixed plastics for thermal and recyclable recycling, loose or pressed into bales. Lindner Jupiter 3200 Drive power: 2x 160 kW (Schorch motors) Sieve perforation: Sieving 148 mm Control cabinet: complete with ( FUe -P-Drive) Opening: 3190 x 1750 mm Single volume: approx. 8 m3 Rotor length: 3190 mm Rotor flight circle: 745 mm Rotor speed: 50Hz : 58 rpm Number of rotor blades: 36 pieces Knife dimension, pointed knife: 145x 145 x 47 mm Geggenmesser unten: 9 pieces Scraper comb above: 9 pieces Hydraulic feed: 11 kW Weight: approx. 38 t Dimensions LxWxH mm: 6250 x 3260 x 3090(H=4900 m ...

Demo machine from demonstration pool Enormously versatile cable slot machine thanks to individually adjustable, standing cutting knives. Cables are cut as standard by two knives penetrating the insulation on the side. The series was significantly improved in terms of safety in 2014 and now features a short feeder for thin cables and a long feeder for thick cables. The change is made in seconds by means of a rotary mechanism. The simplicity in the construction and the construction with two powerful, synchronously running rollers is left. With coarse gearing, even thicker cables are safely fed into the knives and transported further after the cutting process for removal. Blunt knives can be easily and cost-effectively sharpened with a standard grinding machine.

Small shredder for various tasks such as old cables, plastics wood, etc. With hydraulic, electronically controlled feed. Drive 18.5 + 2.2 kW (rotor + feed). Rotor shaft with connectors for connecting a cooling device (e.g. when used for NYM old cables. The machine is 1 year old and little used from our demo machine inventory. The machine is offered with a one-year used machine warranty.

Single-shaft shredder particularly suitable for secondary shredding, granulation of pre-shredded material. Application: Commercial waste for thermal or recyclable recycling, e.g. paper, cardboard, art and foams, rubber, leather, textiles, floor coverings. etc. Lindner Komet 2800, overhauled machine 02/2024 Year of construction 2015 Control cabinet with FÜ ABB, dustproof with dry cooler Control panel: new Drive motors : ABB 2x160 kW Paint New/RAL: 5003/7001 Rotor bearings/squeegee/shaft seals : new Wear plates: stainless steel R+L New Knife holder: new All knives/screws : new Sealing ring rotor: new Sealing ring wall: new Terminal strip top: new Terminal strip bottom: Refurbished Counter knife carriage: Recycled Scraper comb beam with sheets: new Gaskets, brackets, bolts, locking bolts: used very well preserved Adjustment screws (counter knife, scraper comb): new Slidi ...

The IRS 120 Easy is the perfect entry point into cable recycling. The special combination of large flywheels and multi-part segment cutting knives makes it possible to efficiently recycle old cables made of copper or aluminium even without high power consumption and without shredding. The machine impresses with its small footprint, is easy to maintain and easy to use. Compared to most of the competition's systems, the machine has two separate fans for separator air and dust removal. This eliminates the usual interactions between more or less clogged filters and the purity of the copper granules. In addition, the separator air is not roughly adjusted via throttle valves, but by sensitive adjustment of the fan speed. This gives you the best qualities in finished copper. This machine is an immediately available storage machine and has 4 screen inserts, electronic pre-equipment for ...

Demo Machine Specifications:  Dimensions - 1300 x 1560 x 1210 mm, (with built-in drive and control cabinet)  Dimensions of the packed machine - 1500 x 1800 x 1320 mm,  External dimensions of the mill drum - Ø870 x 1120 mm,  Distance between bearings - 1260 mm,  Height of the drum axis - 860 mm,  Operating capacity - 600 dm3,  Weight of the machine - 641 kg,  Installed power - 5.5 kW,  Input voltage/frequency - 400V/50Hz,  Connector - 32A; 400 V  Milling time range - 1s... 99h59min,  Mill installed on a steel frame,  Drum made of 10 mm steel without inner lining. including first filling 80 mm steel balls Technical specification:  Dimensions - 1300 x 1560 x 1210 mm, (with drive and control cabinet installed)  Dimensions of the packed machine - 1500 x 1800 x 1320 mm,  Mill drum external dimensions - Ø870 x 1120 mm, � ...

Small shredder for a wide range of tasks such as old cables, plastics wood, etc. With hydraulic, electronically controlled feed. Drive 18.5 + 2.2 kW (rotor + feed). The machine was overhauled by the manufacturer ISVE in September 2020 and supplemented with an electronics for networking into a cable recycling line. A rotor cover for the optimized processing of old cables has also been added. Currently, the shredder has a 16 mm hole sieve but other hole diameters can also be added. With the 16 mm hole sieve, the shredder reaches about 250 kg/hour when processing mixing cables.

Used shredder for the pre-shredding of old cables and other materials. Cutting unit with knife blocks instead of cutting crowns. Two stator knives arranged opposite each other for higher hourly output. Easy-to-reach maintenance areas. Drive with 2 electric motors with 7.5 kW, 400 V each and a reduction gear arranged directly on the rotor axis. Hydraulic slide valve with load control. Rotor reverses in case of overload. A gearbox replaced. Perforated sieve 25 mm. Additional set of rotor blades. Output approx. 200 kg of cable per hour. The machine can be viewed and tested with us. Write to us. infRecyclinganlagen.info.

Young used machine with very few hours of operation. Compact cable recycling plant with low connected load for 80 - 120 kg/hour (depending on material) This system can be operated with a pre-shredder via a conveyor belt as well as in direct insertion. The system still has the original, unground set of knives, so it can hardly have more than 40 to 50 operating hours. Therefore, we offer this system including a 12-month used machine warranty. Pre-shredders, conveyor belts, dosing accumulators, etc. can also be obtained from us.

Lindner Micromat MS 2000 Drive motor : 75 kW ,400 V/50 Hz Control cabinet: complete star/triangle Rotor speed: approx. 80 rpm at 50 Hz. Rotor blade: 104 pcs. New Rotor blade shape: 43x43x19.5 mm Infill opening: LxW 2030 x 1650 mm Rotor length: 2030 mm Rotor flight circle: 560 mm Wiper comb:yes Counter knife: yes Hydraulic power unit: complete Hydraulic cylinder sieve cassette:sieves 50x50 mm Total weight approx. 11 t Dimensions LxWxH mm: approx. 4520 x2970 x 2660 mm Viewing and trial run possible by appointment. Shipping time: immediately

Small dosing accumulator with screw conveyor for cable recycling plants, wood chips, etc. Capacity approx. 650 litres or 400 - 500 kg of pre-shredded old cable Adjustable conveying speed with frequency converter/inverter 0 - 16 rpm Drive only 0.55 kW with reduction gear Discharge height approx. 750 mm Dimensions (LxWxH): 2,200 mm x 800 mm x 1,800 mm Mobile via large heavy-duty castors with brakes

Lindner Micromat MS 2000 Drive motor : 75 kW ,400 V/50 Hz Control cabinet: complete star/triangle Rotor speed: approx. 80 rpm at 50 Hz. Rotor blade: 104 pcs. New Rotor blade shape: 43x43x19.5 mm Infill opening: LxW 2030 x 1650 mm Rotor length: 2030 mm Rotor flight circle: 560 mm Wiper comb:yes Counter knife: yes Hydraulic power unit: complete Hydraulic cylinder sieve cassette:sieves 50x50 mm Total weight approx. 9.5 t Dimensions LxWxH mm: approx. 4520 x2970 x 2660 mm Viewing and trial run possible by appointment. incl. funnel Shipping time: immediately

engine diesel engine Cummins F3.8 - Stage 5 power approx. 114 kW / 154 HP shafts with 9/9 discs with 6 knives per disc (reconditioned) track system with track protection pads hopper with vibro chute Permanent-Over Belt Magnet remote control weight approx. 11 t

Lindner Antares 1600 Year of construction: Oct. 2019 Operating hours: 2 h Drive motor : 75 kW ,400 V/50 Hz Control cabinet: complete star/triangle Rotor speed: at 50 Hz approx. 100 rpm. Rotor blades: 40 pcs. Sieves: 30 mm round Rotor blade shape: 65x65 mm Filling opening: LxW 1567x 1355 mm Filling volume: approx. 3.2 cbm Rotor length: approx. 1600 mm Total weight approx. 8500 kg Dimensions LxWxH mm: approx. 3394 x 2330 x 2231 mm Total height with hopper: 2931 mm Hydraulic power unit: 4 kW Viewing and test run possible by appointment. incl. funnel Delivery time: immediately available OPTIONAL: 1x Feed Conveyor Overall length:. 7000 mm, at 25° Belt width with driver: 1800 mm Discharge height: approx. 3000 mm Propulsion : 3 kW NORD Max. load: 100 kg/m2 1x discharge belt with climbing part Overall length:. 8000 mm, at 35° Belt width with driver: 650 mm Wo ...

RMH Chain Mill Capacity container 50 litres Drive: 5.5 KW/400 V For shredding electronics, connectors, monolith Adjustable via hand lever and adjustable in different positions. Tiltable

Engine: diesel engine Cummins F3.8 - Stage 5 Power: approx. 114 kW / 154 hp Shafts: 7/7 discs with 8 knives per discs & breaker bar with combs Version: track system with hopper with vibro chute Permanent - OVERBAND Magnet remote control Weight: approx. 11 t

Machine for the processing of mixed waste cables, especially with fine conductors and stranded cables, The plant was most recently used for the post-cleaning of residual plastics from other cable recycling plants. Thanks to the rotor system with the 24 knife segments and the large flywheel masses, the system is also suitable for manual operation. The machine has a cooling unit that optimizes the granulator with a flow temperature of 0.5 °C for the use of heat-sensitive cables, such as NYM, etc. The control electronics of the system enable fully automatic operation in a line with pre-shredder, conveyor belt, dosing accumulator, etc. The machine includes several sets of knives and different sieves. In conjunction with a suitable pre-shredder, the system can process up to approx. 250 kg of old cable. The system was completely overhauled by us and equipped with new tools and par ...

This BA 40.30 granulator was part of a cable recycling plant. These granulators were used by Tecnoecology and MG Recycling. With a rotor length of 400 mm and a diameter of 300 mm, the granulator can handle up to about 500 kg/hour of old cables. The granulator has its own control box with control panel and can therefore also be used standing alone. The granulator comes with several sieves and knife sets.

fire: MIZAR, model: CU 120, Year of construction: 2019, Drive Electro: 125 kW, Blade: 60+4, Length: 5.500 mm, Width: 2.000 mm, Height: 3.500 mm, Weight: 7.000 kg, Capacity: 1,000-1,500 kg/h

Technical Specification, Will be added soon, magnetic drum separators, Mizars semi-magnetic drum separators offer ideal solutions for separating ferrous metals from bulk materials and transported products. The MDS series is easy to operate and maintain and offers energy efficiency with low running costs.

Technical specification, ZZS A1, FEATURE VALUE, POWER 17 KW, LENGTH 2000mm, WIDTH 1250mm, HEIGHT 4180mm, WEIGHT 700kg, zigzag separator, The Zig Zag Separator works based on weight differences. This highly efficient separator uses airflow to separate materials by weight. The zigzag design extends the falling path of the materials, providing a more homogeneous and accurate separation process. It is ideal for separating materials such as plastics and light metals from scrap metal. Our machine is designed to be integrated into production lines and offers maximum performance with low energy consumption. In addition, its compact design allows it to operate in a minimal space. The Zig Zag Separator offers an environmentally friendly solution with high efficiency and low running costs that optimizes your recycling process.

Technical specification, Will be added soon, Overband magnetic separator, Magnetic blocks are designed to effectively remove unwanted metals such as iron and steel prior to the granulation process. They attract and remove metal particles as the materials pass underneath, maintaining product purity and protecting machinery from ferrous residue. Mizars OMS series magnetic separators offer durability and high performance in continuous operation, providing a reliable solution for industry.

Technical specification, FGR S1 FGR M1 FGR L1, FEATURE VALUE FEATURE VALUE FEATURE VALUE, POWER 15 KW POWER 30 KW POWER 45 KW, ROTOR DIAMETER 350 mm ROTOR DIAMETER 350 mm ROTOR DIAMETER 350 mm, ROTOR LENGTH 400 mm ROTOR LENGTH 800 mm ROTOR LENGTH 1200 mm, BLADE 7+2 BLADE 14+4 BLADE 21+6, LENGTH 800mm LENGTH 1200mm LENGTH 1600mm, WIDTH 1400mm WIDTH 1480mm WIDTH 1580mm, HEIGHT 2000mm HEIGHT 2000mm HEIGHT 2000mm, fine mills, Mizar Machines mills offer high performance in industrial waste processing and recycling processes. These mills are designed for efficient grinding and granulation of various materials. With their superior crushing capacity and fast processing times, they can effectively process even challenging materials such as metal cables, plastics and electronic waste. The use of durable materials and wear-resistant blades ensures long-lasting and reliable performance. By prioritiz ...

conveyor belt, The conveyor belt is an important piece of equipment in various industrial applications, designed to efficiently transport materials through different stages of production and processing. Thanks to its robust construction and customizable design, this conveyor system can transport a wide range of materials, from bulk materials to packaged products., With adjustable speed settings and multiple width options, the conveyor can be customized to meet specific operational requirements. Smooth and continuous operation minimizes product damage and ensures safe and efficient material transport. In addition, the modular design allows for easy integration into existing production lines, improving the overall workflow., Safety is a priority, and the conveyor is equipped with features such as emergency stop buttons and guards to ensure a safe working environment, making it an ideal sol ...

Used cable pelletizing system for mixed and stranded cables. The machine has been overhauled and equipped with new tools. The turbine was re-mounted and the control panel was replaced. In addition, the material inlet control has been activated so that the machine can be used automatically. The hourly output depends on the cable up to approx. 250 kg/hour when using a 5 mm sieve insert. The attached video shows the system in combination with the dosing tank and plastic loading. These components can be supplied as an option. It is operated via a 63 amp connection at 400 V. The power consumption is 28 kW. The plant can be visited and tested at our premises. More information at infoRecyclinganlagen.info

Overhauled machine, single-shaft shredder LINDNER JUPITER 2200 It is made for the single-stage processing of untreated municipal, industrial and commercial waste into medium-calorific substitute fuels (40 – 120 mm) – the ideal raw material for thermal utilisation in the cement plant's calciner. Lindner Jupiter 2200 Rotor equipped with flat blades. Year of construction 2015 Control cabinet with FU ABB Control panel Drive motors : ABB 2x132 kW Funnel Hydraulic Discharge belt Total weight approx. 32 t Shipping time: immediately

Technical specification, OF THE S1 OF THE M1 OF THE L1, FEATURE VALUE FEATURE VALUE FEATURE VALUE, POWER 15 KW POWER 20 KW POWER 27 KW, TABLE AREA 0.85 m² TABLE AREA 1.5 m² TABLE AREA 3.3 m², LENGTH 2280mm LENGTH 2350mm LENGTH 2500mm, WIDTH 1090mm WIDTH 1570mm WIDTH 1970mm, HEIGHT 3920mm HEIGHT 3970mm HEIGHT 4020mm, WEIGHT 900kg WEIGHT 1200kg WEIGHT 1350kg, Densimetric separators, Mizar Densimetric Separators efficiently separate materials based on their density differences. This technology is ideal for separating materials of different densities in recycling processes and offers superior performance, especially in applications where metals and plastics need to be separated., The DES series is equipped with precise adjustment mechanisms and high-performance fan systems that are optimized down to the smallest detail. This allows low-density materials to accumulate at the back while hig ...

Technical specification, TRM S1 TRM M1 TRM L1, FEATURE VALUE FEATURE VALUE FEATURE VALUE, POWER 15 KW POWER 30 KW POWER 45 KW, ROTOR DIAMETER 380 mm ROTOR DIAMETER 500 mm ROTOR DIAMETER 620 mm, LENGTH 1420mm LENGTH 1680mm LENGTH 1790mm, WIDTH 700mm WIDTH 820mm WIDTH 940mm, HEIGHT 700mm HEIGHT 920mm HEIGHT 1040mm, WEIGHT 660kg WEIGHT 870kg WEIGHT 1000kg, Turbo Mill, The TRM series of Turbo Mills is an advanced grinding system mainly used in the recycling of electronic boards and cables to effectively crush and grind these materials. Plastics, metals and other components contained in electronic boards and cables are crushed into fine particles and converted into recyclable raw materials thanks to this machine. With its high-speed rotors, the Turbo Mill carries out the grinding process and crushes materials to micron size through friction and impact forces.

Technical specification, ALS A1, FEATURE VALUE, POWER 7.5 KW, BLADE LENGTH 400mm, CUTTING SPEED 7 cuts/min, LENGTH 1650mm, WIDTH 820mm, HEIGHT 1600mm, WEIGHT 1250kg, Alligator Shears, MIZAR ALS A1 is designed for hydraulic cutting of old cables and metal. The surface of the cylinder shafts is induction hardened and chrome plated to ensure a long service life. MIZAR ALS A1 is equipped with specially machined blades made of tool steel and a hydraulic unit from Bosch Rexroth. All electrical and electronic components are from Siemens. Our products are manufactured and certified according to CE and EAC standards.

Technical specification, MUD A1, FEATURE VALUE, SHREDDER POWER 2X7.5 KW, GRANULATOR POWER 22 KW, LENGTH 2500mm, WIDTH 1200mm, HEIGHT 2080mm, WEIGHT 3700kg, MULTI DESTROYER, The Multi Destroyer is a machine specifically designed for shredding printed circuit boards (PCBs). The double-shaft shredder mounted on top effectively breaks down the PCBs and feeds them to the granulator below. The granulator converts the shredded material into fine granules, making it easier to recycle and reuse., The twin shaft shredder uses special knives made of wear-resistant steel that provide maximum durability and performance. The feed rate of the material can be easily adjusted via a user-friendly control panel. The granulator is optimized for high efficiency and ensures that the final product is the desired size., The Multi Destroyer uses a jet filter to minimize dust formation and ensure a cleaner and sa ...

Technical Specification, CUA S3 CUA M3 CUA L3, FEATURE VALUE FEATURE VALUE FEATURE VALUE, POWER 40 KW POWER 80 KW POWER 120 KW GRANULATOR MOTOR 30 KW GRANULATOR MOTOR 55 KW GRANULATOR MOTOR 90 KW GRANULATOR BLADE 3+2 GRANULATOR BLADE 40+4 GRANULATOR BLADE 60+6, LENGTH 2500 mm LENGTH 5280 mm LENGTH 6270 mm WIDTH 2300 mm WIDTH 2000 mm WIDTH 2250 mm HEIGHT 2450 mm HEIGHT 2860 mm HEIGHT 3200 mm WEIGHT 2700 kg WEIGHT 5000 kg WEIGHT 6500 kg, Classic Series, The CUA series efficiently separates the internal and external components of cables for recycling. The integrated system, consisting of granulation, separation and fan units, effectively shreds and separates 99.6% of cable components. The materials can be fed manually via a conveyor belt or automatically using the SSH series pre-shredding machine equipped with intelligent PLC software. The compact design and user-friendly PLC touch screen c ...

Technical specification, SSH S1 SSH M1 SSH L1, FEATURE VALUE FEATURE VALUE FEATURE ​​​​​​​VALUE, POWER 17kW POWER 35kW POWER 50kW, ROTOR DIAMETER 240 mm ROTOR DIAMETER 350 mm ROTOR DIAMETER 350 mm, ROTOR LENGTH 430 mm ROTOR LENGTH 620 mm ROTOR LENGTH 920 mm, BLADE QUANTITY 27+20 BLADE QUANTITY 24+18 BLADE QUANTITY 36+26, BLADE DIMENSION 30x30mm BLADE DIMENSION 50x50mm BLADE DIMENSION 50x50mm, LENGHT 1400mm LENGHT 1460mm LENGHT 1850mm WIDTH 900mm WIDTH 1950mm WIDTH 2670mm, Single Shaft Shredder, The SSH series shredders are designed to efficiently shred various waste such as cables, radiators, electronic boards, wood, plastics and tires using custom-designed blades on a single rotating shaft. A programmable hydraulic pusher ensures continuous feeding of the rotor. In the event of a jam, the rotor reverses direction so that the cutting process can continue without interruptio ...

Technical Specification, DSH S1 DSH M1 DSH L1, FEATURE VALUE FEATURE VALUE FEATURE ​​​​​​​VALUE POWER 2X15 kW POWER 2X30 kW POWER 2X45 kW ROTOR LENGTH 520 mm ROTOR LENGTH 770 mm ROTOR LENGTH 1080 mm BLADE THICKNESS 45 mm BLADE THICKNESS 75 mm BLADE THICKNESS 75 mm LENGTH 2620 mm LENGTH 3860 mm LENGTH 4400 mm WIDTH 1050mm WIDTH 1200mm WIDTH 1440mm HEIGHT 2700mm HEIGHT 3000mm HEIGHT 3000mm WEIGHT 2600kg WEIGHT 5500 kg ​​​​​​​ WEIGHT 6500 kg, The DSH series shredders are designed to shred large quantities of durable materials using custom-designed blades mounted on two parallel shafts. The rotors move independently and are driven by a planetary gear system powered by an electric motor., The twin shaft rotor offers an effective solution for recycling scrap metal, plastics, wood and other tough materials. Its robust structure and synchronized twin shaft blades ensu ...

Technical specification, CBR A3, FEATURE VALUE, POWER 5.5 KW, CABLE DIMENSIONS 1-120mm, CUTTING SPEED 25 meters/min, LENGTH 1240mm, WIDTH 780mm, HEIGHT 1330mm, WEIGHT 480kg, cable stripping machine, CBR A3 cable stripping machine is specially designed to remove the outer insulating material from cables of all sizes, allowing the conductive material inside to be easily removed. This series offers excellent performance on steel armored cables (SWA), double steel armored cables, steel tapes, PVC coated cables, lead coated cables, thick rubber coated cables, nylon coated cables, low grade cables, TT cables and more. Specially machined blades with unique design enable cutting and stripping of cables of any length for a long period of time without the blades becoming blunt. All electrical and electronic components of CBR A3 series are Siemens brand. Our products are manufactured and certified  ...

A compact, effective and powerful system for the separation of light residues. The adjustable suction head can be mounted directly on a conveyor belt or above a star screen deck. The MM Air 22 air classifier is designed for maximum impact, ease of installation and reliability. The MM Air 22 air classifier has the following features: 22 kW highly effective suction unit with belt drive Built-in electric control panel Variable speed control Air flow rate up to 266 m³/min Large doors for easy maintenance and cleaning Reinforced fan wheel and suction chamber Universal conveyor belt attachment There can be two suction heads on the machine can be attached Vacuum head: Suction head suitable for a bandwidth between 800 - 1200mm Easy to assemble and stable while working 400mm air hose connection to MM-Air 22 Electric Suction Fan Unit: Length: 1850 mm Width: 1323 mm Heigh ...

Sorting/Cutting Table

The BTS-Glass Bottle Crusher is ideal for crushing empty glass bottles and glasses in catering business and other bottling companies. It is also used in factories with glass waste issues. You can crush up to 100 glass beer bottles per minute. The glass bottle crusher impresses with its ease of use, safe operation and the spacious filling chamber. By crushing these valuable and recyclable materials you achieve a volume reduction of up to 80%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Machine size: 1850 H x 965 W x 832 D mm Machine weight: 315 kg Transport height: 1850 mm Volume reduction: up to 80 % Loading aperture: 481 W x 337 H mm Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) User-friendly, safe and easy to operate Reduces the frequency of daily/weekly glass waste collections Suita ...

Grease separator sether boiler, Type: Easy Clean Standard NS 4B completely cleaned and rinsed, grease-free and odourless. leakage test. A spout pump is included in the scope of delivery. New price was 8000,00â?¬ net. Deutschaland-wide shipping in German-speaking countries possible at an additional cost. Delivery: - Boiler grease separator Easy Clean Standard NS 4B - Sampling device DN100/150 horizontal - Spühl pump for grease separators