tilting used for sale

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN 407 / 415 Technical data Table length: 850 mm Table width: 440 mm Number of T-channels: 6 T-channel width: 14H7 mm Distance of the T-slots: 63 mm Longitudinal travel (X-axis): 600 mm Transversal travel (y axis): 450 mm Vertical travel (z axis): 400 mm c axis resolution max.: 0.001 ° Table load max.: 500 kg Taper in spindle: 40 ISO Spindle speeds: stepless from: 20 rpm up to: 4500 rpm Spindle nose SK: 40 Feeds (X, Y, Z): 1 - 10000 mm/min Feeds: stepless Rapid traverse:: 10 m/min Vertical quill travel: 75 mm Voltage 50 Hz 3x: 380 Volt Milling spindle motor: 8 kW Total power required: 15 kW Machine´s weight about: 2700 kg Overall dimensions machine: Length: 3100 mm Width: 2850 mm Height: 1930 mm Various  ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Technical data Rotary table:diameter: 630 mm Longitudinal travel (X-axis): 710 mm Transversal travel (y axis): 550 mm Vertical travel (z axis): 500 mm Tool changer: Number of tools: 30 Spindle speeds: up to: 20000 rpm Voltage 50 Hz 3x: 400 Volt Machine´s weight about: 10000 kg Overall dimensions machine: Length: 3650 mm Width: 2480 mm Height: 2800 mm Various accessories: Coolant system Tilting rotary table 2 continuous axes: NCRST 630 5-sided machining

Sold is a lifting-tilting device for loading trolleys made of stainless steel Year of construction 2018 load capacity up to 300 kg The plant is in very good condition and is dismantled

roll diameter: 560 mm roll length: 1500 mm rolls drilled: Peripher Nip adjustment: hyraulisch 0 total power requirement: 150 kW Condition: used, completely overhauled, with warranty Specification: rolling mill 560 x 1500 mm - used model external gearbox - motor sideways placed at the machine - roll diameter: 560 mm - roll length: 1500 mm - model: Duplocom / pluridrive - Peripherally drilled rollers for water cooling - Cardan joints between gearbox and rollers - Individual drive for the rollers, for variable friction - hydr. gap adjustment - Hydraulic unit - Tilting steel guide plates - rollers mounted on roller bearings with appropriate lubrication - rollers with new ball bearing slewing rings, make Maier, for the connection to the water circuit - One gearbox - two individual drives, each with: 2x 75 kW - 400 V - 50 Hz - two new frequency conv ...

EMAG VSC630 CNC vertical lathe, inverted spindle Line consisting of 2 CNC Pick up lathes complete with workpiece handling: loading/tilting/unloading MAKE EMAG MODEL VSC630 CNC SIEMENS 840 1998 X 1150 mm Z 500 mm Max dia 680 mm Chuck 500/630 Spindle power max 74kW / 2350 Nm Spindle RPM max 2000 Rapidi (X, Z) 30 / 20 m/min Tool turret 8 pos / 60 mm shank dia. Weight 2 x 22000 kgs Note: Visibile funzionante nel nostro magazzino - Under power in our warehouse – Unter Strom in unserem Lager Tech. Data not binding

SPECIFICATIONS: Machining center for final processing and assembly of fittings on windows and doors Dimensions workbench mm: 2,800 x 1,250 Three-spindle drilling unit for grip holes Pneumatic system for reading and cutting window handles "Cremonese" Tilting workbench Complete with pneumatic screwdriver

Cream cooker CM 120 Rational work in cooking and heating creams and masses Accurate temperature control 2 performance levels Digital timer Boiler filling 120 liters Mass 12 min - 78 max. liters filling quantity Stainless steel Hand crank for tilting Thermal oil boiler heating Machine mobile with locking plate DGUV V3 tested Connection 400V, 15 kW, 32A-CEE plug Dimensions 1200 x 1000 x 1800 mm, WxDxH NEW Machine with 12 months warranty Option: - Drain tap

For sale: Diosna spiral kneader W 240 - 3 boilers - Program memory - Speed control with an inverter - with the possibility to change the speed of the spiral/tool - boiler with tilting possibility - perfect condition Contact: damianborucki@anbox.pl or +48 692 345 660 (also WhatsApp)

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 600 mm Table width: 190 mm Longitudinal travel (X-axis): 300 mm Transversal travel (y axis): 135 mm Vertical travel (z axis): 300 mm Spindle speeds: number (steps): 8 from: 100 rpm up to: 1500 rpm Taper in spindle:: 20 W Feeds steps:: 8 longitudinal from: 12.0 mm/min up to: 232 mm/min Voltage 50 Hz 3x: 380 Volt Motor output: 2.0 HP Machine´s weight about: 620 kg Overall dimensions machine: Length: 1100 mm Width: 900 mm Height: 1600 mm Various accessories: Dividing attachment Centre height: 85 mm Vice: width: 50 mm Tilting and swivel table Vertical milling head Lamp

- max mortise depth 150 mm - max mortise length 340 mm - stroke 300 x 80 mm - head rotation +/- 45? - min/max workpiece height 600/1000 mm - table size 460 x 135 mm - tilting of the table +/- 45? - motor 2,2 kW - frontal clamp - automatic chain lubrication

pressure: 135 t chamfer lenght: 3100 mm distance between columns: 2600 mm column arm: 410 mm ram stroke speed: 200 mm/sec return speed: 120 mm/sec work speed: 10,0 mm/sec work stroke: 275 mm dayligth: 550 mm table height: 900 mm table width: 90,0 mm oil volume: 200 ltr. voltage: 400 Volt total power requirement: 11,0 kW weight: 8.650 kg range L-W-H: 4.250 x 2.050 x 2.800 mm -------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA-58T graphics / touchscreen 2D graphic programming 15 high definition color TFT screen Bending sequence calculation Product programming and display in real size USB interface - Motorized backgauge with R-axis, on recirculating ball spindles  ...

Divider, Wheels, Chucks, Divider Discs, Points, High: 1.500 mm, Long: 1.100 mm, Width: 1.400 mm, Weight: 600 kg, Voltage: 220/380 V, Ø tool: 200 mm, Total power: 1.5 HP, Wheel speed: 3,000 / 6,000 r.p.m., Grinding length: 450 mm, Ø max workpiece: 300 mm, Transversal stroke: 300 mm, Longitudinal stroke: 450 mm, Distance between points: 450 mm, Tilting the tool trolley: +/- 20º, Race car rolling (x axis): 450 mm, Vertical travel of trolley wheel: 250 mm, Specification: Universal

Divider, Wheels, Chucks, Divider Discs, Points, High: 1.500 mm, Long: 1.400 mm, Width: 1.170 mm, Weight: 600 kg, Voltage: 220/380 V, Ø tool: 200 mm, Total power: 1.5 HP, Wheel speed: 3,000 / 6,000 r.p.m., Grinding length: 450 mm, Ø max workpiece: 300 mm, Transversal stroke: 300 mm, Longitudinal stroke: 450 mm, Distance between points: 450 mm, Tilting the tool trolley: +/- 20º, Race car rolling (x axis): 450 mm, Vertical travel of trolley wheel: 250 mm, Specification: Universal

Niro-tech RX-150 single shaft paddle mixer, This RX-150 is made of stainless steel. The machine allows mixing in both directions. It is equipped with a single mixing shaft and moisture proof button control panel. Motor power 1.5 kW provides 5-48 rot. /min. The tank capacity is 150 liters, which allows filling it with 110 kg of meat. Unloading provided by tilting the drum to about 96 degrees. The mixer adapted to unloading directly to the standard buggies of 200 liters capacity.

Stephan Kitchen Cutter Universal Model FD 622/4D -Stephan Kutter -Aluminium boiler -Boiler with tilting function -2 speeds -with 2 mixing tools -with 1 knife mixing tool

Technical data Table length: 600 mm Table width: 190 mm Longitudinal travel (X-axis): 300 mm Transversal travel (y axis): 135 mm Vertical travel (z axis): 300 mm Distance from vertical spindle to table: 260 mm Distance from horizontal spindle to table: 310 mm Spindle speeds: number (steps): 8 from: 100 rpm up to: 2000 rpm Taper in spindle:: 20 W Feeds steps:: 8 longitudinal from: 12.0 mm/min up to: 116 mm/min Voltage 50 Hz 3x: 380 Volt Motor output: 2.0 HP Total power required: 2.5 HP Machine´s weight about: 600 kg Overall dimensions machine: Length: 1100 mm Width: 900 mm Height: 1600 mm Various accessories: Steady Tilting table

Technical data Table length: 600 mm Table width: 190 mm Longitudinal travel (X-axis): 300 mm Transversal travel (y axis): 135 mm Vertical travel (z axis): 300 mm Distance from vertical spindle to table: 260 mm Distance from horizontal spindle to table: 310 mm Spindle speeds: number (steps): 8 from: 100 rpm up to: 2000 rpm Taper in spindle:: 20 W Feeds steps:: 8 longitudinal from: 12.0 mm/min up to: 116 mm/min Voltage 50 Hz 3x: 380 Volt Motor output: 2.0 HP Total power required: 2.5 HP Machine´s weight about: 600 kg Overall dimensions machine: Length: 1100 mm Width: 900 mm Height: 1600 mm Various accessories: Steady Tilting and swivel table

Technical data Table length: 600 mm Table width: 190 mm Longitudinal travel (X-axis): 300 mm Transversal travel (y axis): 135 mm Vertical travel (z axis): 300 mm Distance from vertical spindle to table: 260 mm Distance from horizontal spindle to table: 310 mm Spindle speeds: number (steps): 8 from: 100 rpm up to: 2000 rpm Taper in spindle:: 20 W Feeds steps:: 8 longitudinal from: 12.0 mm/min up to: 116 mm/min Voltage 50 Hz 3x: 380 Volt Motor output: 2.0 HP Total power required: 2.5 HP Machine´s weight about: 600 kg Overall dimensions machine: Length: 1100 mm Width: 900 mm Height: 1600 mm Various accessories: Steady Tilting table Vertical milling head

Technical data Table length: 590 mm Table width: 320 mm Longitudinal travel (X-axis): 400 mm Transversal travel (y-axis): 250 mm Travel of the vertical slide: 500 mm Passage from grinding motor to table: 480 mm Distance from spindle-center to vertical slide: 310 mm Max. grinding diameter: 180 mm with display-plate: 220 mm Max. angle with taper grinding: up to: 12.0 ° Vertical travel of grinding spindle: stepless from: 3 mm up to: 110 mm Travel speeds: stepless up to: 6.0 m/min Planetary motion speeds: c axis stepless from: 5 rpm up to: 330 rpm Possible grinding-spindle speeds: stepless from: 9000 rpm up to: 80000 rpm With air-turbine max.: 100000 rpm Voltage 50 Hz 3x: 380 Volt Spindle motor: 7.5 HP Machine´s weight about: 2800 kg Overall dimensions machine: Length: 1400 mm Width: 1600 mm Height: 2700 mm Various accessories: Tool cabinet Centering device Frequency convertor static ...

Technical data Table length: 600 mm Table width: 190 mm Longitudinal travel (X-axis): 300 mm Transversal travel (y axis): 135 mm Vertical travel (z axis): 300 mm Distance from vertical spindle to table: 260 mm Distance from horizontal spindle to table: 310 mm Spindle speeds: number (steps): 8 from: 100 rpm up to: 2000 rpm Taper in spindle:: 20 W Feeds steps:: 8 longitudinal from: 12.0 mm/min up to: 116 mm/min Voltage 50 Hz 3x: 380 Volt Motor output: 2.0 HP Total power required: 2.5 HP Machine´s weight about: 600 kg Overall dimensions machine: Length: 1100 mm Width: 900 mm Height: 1600 mm Various accessories: Vice: width: 100 mm Tilting table Vertical milling head

Tapping capacity: 60 mm Drilling capacity: 0 mm Throat: 0 mm Tapping depth: 0 mm Tapping up to M 6 Table 1650 x 605 + extra tilting 305 x 605 Inclinable 0 - 90 Gr . Workingh area 0 - 1500 mm  

Machine type Machining center universal BAZ Manufacturer Heller Model MCS-H / U 300 Year of construction 2002 Condition good (used) Specifications Bright MCS-H/U 300 Year of construction: 2002 Control: Siemens 840 D Workspace: Longitudinal stroke X-axis 1000 mm Vertical stroke Y-axis 800 mm Transverse stroke Z-axis 1100 mm Lifting position longitudinally to the center of the table MCS-H X-axis +500 to -500 mm Lifting position vertically over. Palettes. MCS-H Y-axis +120 to +920 mm Lifting position transverse to the center of the table MCS-H Z-axis +200 to +1300 mm Guidance system: Linear compact roller guide version Size 55 Transfer elements: Accuracy Ball Screws Diameter x Slope Diameter 50 x 20 mm Feed drive system: Three-phase servo motors Closed design Feed forces: X-axis at ED S3-40% 15000 N Y-axis at ED S3-40% 15000 N Z-axis at ED S3-40% 20000 N Positio ...

Stroke: 0 mm Throat: 650 mm Table diameter: 220 mm Make Urpe M 200 G Type M 200 G Year 1988 slotting machine senkrecht stossmaschine schwenkba Stroke = 0 - 200 mm Table = 650 x 220 Head tilting = 0 - 30 Gr.  

Bread roll system Kövy KA 2 4- deer hourly output 4800 pcs. for 60x40 and 60x80 cm tilting planks Baker's condition ready for action

Table length: 1230 mm Table width: 410 mm Longitudinal X: 700 mm Cross Y: 315 mm Vertical Z: 540 mm CNC Brand: Heidenhain CNC Model: TNC 426 Make Fehlmann 82Type82 CNC HF Year 1998 Heidenhain TNC 426 Table length (mm) X = 700 Table width (mm) Y = 315 Longitudinal  X (mm) Z = 540 Cross Y (mm) Hsk 50 / 30.000 Vertical Z (mm) Table 1230 x 410 Rapid = 15.000 mm Large tooling 4e axis with tilting !  

- Sous vide. - With mixing arm and mixing arm. - All stainless steel. - Power: 1.16 kW. - Voltage: 400 V. - Tilting tank. - Tank capacity: 150 L. - With vacuum pump. - Frequency: 50 Hz. - Overall dimensions (L x W x H): ± 1,200 x 1,000 x 1,500 mm. - With control box with working and waiting time.

CNC - Sheet Metal Parts - Roll Straightening Machine for plane straightening and relaxing of thermally cut sheet metal parts, for stamped parts, for sheet metal parts that have been cut to size with the sheet shear. Our roller straightening machine is a purely electric machine, not hydraulics, the electronically controlled servo motors enable automatic CNC – controlled face straightening in the continuous process. CNC – controlled precision sheet metal parts roll straightening machine for sheets from 0.7 mm to a maximum of 14 mm sheet thickness at 500 mm sheet width Largest sheet width 1,500 mm Guideline power over the full width - - Steel sheet quality SR235 from 0.7 mm to 10 mm - Stainless steel sheet from 1 mm to 6 mm Planning by - 19 piece straightening rollers with Ø 50 mm 21 pieces of intermediate rollers with Ø 30 mm 13 pieces of support roller sets with ...

CNC - Sheet Metal Parts - Roll Straightening Machine for plane straightening and relaxing of thermally cut sheet metal parts, for stamped parts, for sheet metal parts that have been cut to size with the sheet shear. Our roller straightening machine is a purely electric machine, not hydraulics, the electronically controlled servo motors enable automatic CNC – controlled face straightening in the continuous process. CNC – controlled precision sheet metal parts roll straightening machine for sheets from 0.7 mm to a maximum of 14 mm sheet thickness at 500 mm sheet width Largest sheet width 1,500 mm Guideline power over the full width - - Steel sheet quality SR235 from 0.7 mm to 10 mm - Stainless steel sheet from 1 mm to 6 mm Planning by - 19 piece straightening rollers with Ø 50 mm 21 pieces of intermediate rollers with Ø 30 mm 13 pieces of support roller sets with ...

length: 0 mm weight of the machine ca.: ca. 200 kg. For collecting and disposing of bulk goods and industrial waste Furnishing : - Tipping containers - forklift attachments - for in-house storage of bulk goods - powder-coated in standard color - RAL 5010 blue, RAL 6011 green or RAL 7016 anthracite gray - Tilting device with base plates for swivel and fixed castors - Drainage device - Stable base frame with drive-in pockets - Favorable load center - Robust sheet steel construction with reinforced edges - Container volume: approx. 600 l available for a surcharge: - 2x fixed castors / 1x swivel castor .. 59.00 euros The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Suitable for dressing and profiling diamond and CBN grinding wheels., Accessories: Total enclosure, Rush camera system with high-resolution B / W camera (15x, 30x, 60x zoom), autom. Zoom control, video overlay (CAD drawing on live image) with 22 LCD monitor and Ruvision software, On-board PC with Windows and 17 monitor, Glass scale on the linear axes X and Z, 2 machine lights 12 V, Cooling system 30 Liter tank, Automatic delivery and tilting via servomotors, control panel with touch, Automatically starting position at the end of the work process, Central lubrication, Mist extractor., Specifications: Grinding wheel holder HSK 50 E, diamond grinding wheel diameter 50 - 250 mm, max. grinding wheel width 70 mm, grinding wheel bore diameter 20 mm, speed of the diamond / CBN wheel spindle stepless adjustable 100 - 1000 rpm, connected load of the motor of the grinding wheel 1,75 kW, grinding wh ...

used shredder / shredder Manufacturer: ZENO Type: ZTLL 1600 x 1600 Year of construction: 2018 Operating hours: approx. 400 Specifications: Drive power: 2 x 55 kW Sieve: 35 mm hexagonal Screen design: solid screen basket, reinforced with ribs, including sieve quick-change device Counter knife: with cutting gap adjustment Hopper: 1,075 mm high, without lid with maintenance door and level sensor (Sonar Bero) Transmission: Compact gearbox with torque cut-off Filling opening: 1,600 x 1,600 mm Rotor speed: approx. 80 - 120 rpm Rotor aircraft: 600 mm Rotor design: 4 rows (76 pieces) positive inserts 60 x 60 mm on tool holders Rotor bearing: Standing bearing Machine floor and slide bottom: grooved Weight: approx. 13,400 kg Universally applicable shredder for a wide variety of materials The ZTLL shredder is the result of more than 35 years of kn ...

New VDL 2D chiseling machine with the possibility of automatic drilling at distances of 25 and 32 with the possibility of tilting and turning in 2 directions. Technical parameters: Control of the machine with 1 lever Power of the main motor: 1.5 kW Tool speed: 2850 rpm Spindle diameter: 3 - 16 mm Stroke of the spindle: 180 mm Dimensions of the table: 600 x 450 mm Weight of the machine: 320 kg

length: 1900 mm width: 810 mm height: 860 mm internal dimension: 1,5 x 0,74 x 0,78 Contents: 600 l The containers are chip bins ! - powder-coated in RAL 6011 green. - tilting device - Drainage device - Anti-tip device and forklift pockets. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Crosscut and miter circular saw make GRAULE type ZS 85 NYear of construction 1996Technical specifications:Saw blade diameter: 300 mmCross cuts: 380 x 85 mmMiter cuts: 265 x 85 / 380 x 60 mmSaw blade speed: 2800 rpm.Drive power: 2.2 kWPower connection: 220 V / 50 HzWeight: 75kgWith- tilting version- without baseused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Steel grinding machine make SIMON Frankfurt type L 20Fabr. -No: 2190Number of stations: 2 piecesgr. disc diameter: 200 mmGrinding spindle speed: 2800 rpmDrive power: 0.6 kWExternal dimensions L x W x H: 1300 x 700 x 1200 mmWith:- 1 table support eachxa0xa0 right pendulum table 280 x 140 mmxa0xa0 left tilting pendulum table 280 x 140 mm- splash guardused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Welding turntable make ART Welding type AP 6Serial -No: 2016066 Year 2016Technical specifications:Load capacity: 600 kgWorking table diameter: 800 mmTilt Angle:-95° / +15°Tilting speed: 0.35 rpm.Speed: 0.09 - 0.9 rpm.Drive power: 1.5 kWWeight approx.: 700 kgDimensions approx.: 1100 x 570 x 1300 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Laser cutting machine Trumpf TruLaser 3030 with TruStore 1030 and SortMaster - Laser power 5000 watts. - Year of construction 2010 - Thin Sheet Productivity Package - Nozzle changer - Cross conveyor belt - Tilting container for transverse conveyors - LiftMaster Store - Extension Sort (1000 x 600) - Extended partial removal from 600 x 600 - Integrated sheet metal alignment - Separating thin sheet - Sliding gate bifly - SortMaster - Rotary unit + extended partial removal 1000 x 600 infinitely variable - Additional gripper long parts - Extension of magnetic suction - TruStore 1030 - Storage/retrieval station with trolley - 10 layer compartment 90mm + pallet - 5 pallet bottoms - Saulenverkleidung - Warehouse interface Available from the end of the year or at the beginning of next year. Errors in the technical data and prior sale excepted.

x-travel: 800 mm y-travel: 700 mm z-travel: 610 mm Control: Siemens 828 D total power requirement: kW weight of the machine ca.: 8,7 t dimensions of the machine ca.: m ONLY 2800 HOURS SPINDLE WORKS Description The QUASER MF vertical machining centres are highly versatile, offering high speed, high powered machining with 4+1 and full 5-axis machining capability along with large X-axis machines with a compact footprint. Superb build quality and stability for high volume production, toolroom and subcontract machining environments. Specification Table size 500mm diameter Travels – X/Y/Z axes 800 x 700 x 610 mm A Axis + 30 deg ~ -120 deg C Axis 360 deg continous Maximum swing 630 mm Table surface to spindle nose -25mm ~ 585mm Spindle nose to tilting centre at 90 deg -25mm ~ 585mm Maximum work piece of size 630mm dia x 300mm Table load capacity 300kg Spindle taper BT40 Spindle options 10,00 ...

mechanical turning and tilting Capacity: 15 ton

TECHNICAL SPECIFICATIONS Manufacturer: Liebherr Description: Mining Bagger / Tieflöffelbagger Type: R9150 - 1133 Litronic Year of construction: 2016 Bucket volume: 9.0 cbm Flow rate: up to 1,000 t/h Operating hours: approx. 10,000 h Engine: Liebherr V12 diesel engine, 565 kW / 1757 hp at (1,800 rpm) Displacement: 24.24 l Emission stage: EU Stage 2 / Tier 2 Hydraulics: 4 x Liebherr hydraulic pumps (total flow rate 2171 l/min) SPECIFIC COMMENT - 1133 undercarriage track 4.230 mm, wheel 5.2OO mm - Chains LH 1562; 2-web bottom plates 6OO mm - Monoblock boom 7.80 m with lifting cylinder - Bucket handle sealed 3.40 m with tilting cylinder TECHNICAL SPECIFICATIONS Manufacturer: Liebherr Description: Mining excavator / Backhoe excavator Type: R9150 - 1133 Litronic Year of construction: 2016 Bucket volume: 9.0 cbm Operating hours: approx. 10,000 h Output: up to 1,0 ...

220627 Code Description Universal Cylindrical Grinder Make Jones - Shipman Model 1310 ( 8" x 18" ) Serial No. Year ? Grinding length, max. 450 mm Grinding diameter, max. 203 mm Center height 103 mm Weight workpiece kg Table tilting angle - 15 ° till + 15° Diam. Grinding wheel 350 mm Width Grinding wheel, max. 40 mm Motor power grindingwheel 1.5 kW Speeds Grindingwheel 1750 / 2300 rpm Speeds workpieceholder ( 6x ) 30 – 415 rpm Total power 3.5 kVA 380 Volts Machine size L x W x H 1.7 x 1.2 x 1.75 meters Weight 1800 kg Accessories internal grinding ( 10500-16500-24500 rpm ) coolant some tooling Condition Machine is in good condition

boring depht: 220 mm; drilling length: 340 mm; height adjustment: 145 mm; drilling head tiltable: -60° bis +60°; mieter fence adjustable: 30° - 90°; motor power: 1,5 / 1,9 kW; speed: 1400 / 2850 U/min; suction connection: 100 mm; machine length: 1200 mm; machine width: 1050 mm; weight: 240 kg; The top model of the LBM range features a drill head tilting 60° to the right and left, making it the perfect solution for assemblies around staircases, window and frame works. The motor is moved single handed and the work table is mounted firmly which allows for processing of oversize workpieces such as doors for example. Properties Maintenance-free linear guiding allows for feed of drill depth Quick lift system allows for effi cient, economical processing without time-consuming winding of crank Smooth, stepless height setting of drill head features fi ne adjustment and ...

plate thickness: 4,0 mm ST plate thickness: 3,0 mm VA table-size: 1200 x 780 mm blade length: 200 x 200 mm strokes per minute: ca. 60 min angle adjustable from - to: 15 - 150 Grad engine output: 4,0 kW weight of the machine ca.: 1200 kg dimensions of the machine ca.: 1700 x 1000 x 1500 mm Furnishing: - electro-hydraulic notching machine, with angle adjustment 15° - 150° Angle adjustment by hand wheels - front panel - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface to avoid tilting or slipping of the metal sheet - 2x staking stops with movable and interchangeable stop bars - lateral clippings ejection - free-moving footswitch - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 4,0 mm : 3,0 mm : 30 - 120 Grad blade length: 150 x 150 mm work height max.: 900 mm table:: 1000 x 650 mm engine output: 3,0 kW weight: 850 kg range L-W-H: 1250 x 1000 x 1160 mm Furnishing: - Notching machine with angle adjustment 30° - 120° - Simple and functional Touch Pad control panel Set-up stroke Single stroke continuous stroke - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface to avoid tilting or slipping of the metal sheet - adjustable lift height adjustment - 2x staking stops with movable and interchangeable stop bars - Waste bin - free-moving footswitch - Operation manual BOSCHERT angle adjustment: - the one-piece 30° upper knife is within one tool both with a left and directly connected to a right lower knife - once for each notch over 30° left and once on the right. - the swivel adjustment becom ...

Brand: Velo Type: Diatomaceous earth filter Capacity: 8000 to 10.000 Litre/hour 38 Pfälzer screw fittings, • 4 m2 filter area with complete stainless steel filter and self-discharge via centrifugation • Suitable for pressure • with standing sieves, attached residual filtration and replacement pump (never used) • Manual tilting device for the discharge and vibrator for the remaining discharge • User friendly, filter can be cleaned very quickly Good, ready-to-use condition, flawless filter, and cost efficient Reason of sale; company asset sales

belt width: 150mm; belt length: 3000mm; table size: 960mm x 350mm; table for rounds: 330mm x 330mm; veneer grinding unit: ja; oszillation: ja; grinding unit tiltable: ja 90° - 45°; suction connection: 120mm; motor power: 3 kW; machine length: 1910mm; machine width: 840mm; weight: 330kg; properties Heavy machine stand in torsion and vibration-free design, extremely stable Grooved feed ruler, ideal for grinding veneer supernatants Double-sided suction connection 80/100 mm for optimum chip removal Oscillating sanding belt ensures a high removal rate and a clean sanding pattern Maintenance-free grinding belt oscillation with separate gearmotor, optionally switchable Height-adjustable sanding table for utilization of the entire sanding belt Standard veneer edging device with fine adjustment Fast conversion from veneer to solid wood sanding possible Height adjustment of the  ...

5-Axis Horizontal Machining Center with Pallet changer Mandelli Spark 3500X New in 2018 Siemens Sinumerik 840D control Number of pallets 2 Pallet size 1250 x 1600 mm Pallet load capacity max. 5100 kg 4th axis 0.001° NC rotary table 5th Axis NC-Tilting milling head A-Axis +80° ~ -120° X 3500mm Y 1850mm Z 1800 mm Feeds X,Y,Z up to 20000 mm/min. Rapids X,Y,Z up to 35000 mm/min. Tool taper HSK-A100 Spindle drive motor rating 46/67.7 kW Spindle speeds up to 6000 rpm. Spindle torque max. 1851 Nm 200 station tool magazines. Tool diameter max. 120 mm/425 mm Tool length max. 600 mm Tool weight max. 35 kg Coolant through the spindle 25/40/60 bar Proposal Number MH-6234

Vacuum Thumbler Ulbricht Fully refurbished Type: SKMA 1500 Capacity: 2000 liters Power: 11.5 kW Outer dimensions: 2700 x 2400 x 2150 mm Controller Smooth speed control Entirely made of stainless steel Cooling Vacuum Tilting drum up and down Condition: Fully refurbished

De STEFANI edge polisher model MVT1000: - 1 tilting tape, for straight and shaped edges - variable belt speed with potentiometer on the panel - forward track with variable speed - manual lifting of the presser

table diameter: 900 mm table load: 1.000 kg Frontal Loading Center (A): 150 mm Side Loading Center (B): 150 mm Rotating speeds: 0,1 - 1,1 UpM T-slots: 6 x M16 Tilt Angle: 90-180-105 ° Tilting Speed: 30 sn min./90° weight of the machine ca.: 930 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.