tilting rotary table used for sale

For sale is an Aerzen GMA 10.2 rotary lobe blower. Can also be used as a replacement for a GM 7 L. Year of Make: 2000 Condition: Refurbished - all wear parts renewed, immediately ready for use The blower has been professionally overhauled and is in perfect technical condition.

For sale is an Aerzen GMA 11.3 rotary lobe blower. Can also be used as a replacement for a GM 10 S. Year of Make: 1990 Condition: Refurbished - all wear parts renewed, immediately ready for use The blower has been professionally overhauled and is in perfect technical condition.

For sale is an Aerzen GMA 11.3 rotary lobe blower. Can also be used as a replacement for a GM 10 S. Year of Make: 1990 Condition: Refurbished - all wear parts renewed, immediately ready for use The blower has been professionally overhauled and is in perfect technical condition.

Stock number: SF018, Rotation filter, stainless steel,, Fratelli Gianazza type 15020., Double jacket., Rotation, for kieselguhr., Ø 500 mm, 5,6 m²., Material: Stainless steel AISI 304

For sale rotary dryer made from Bison, output 5 t/h, with heating stove 6mW with self feed and self cleaning moving fllor. With all need equipment, cyclon, chimney, and fans. Price 110.000,00 EUR EXW. +38765812388 Neven

TAYLOR Hydraulic Rotary Clamp - Working length mm. 2400 - Working width mm. 800 - 20 sections - N. 3 pressers for each section

Heidolph Laborata 4001 complete with condenser and water bath, 0-270 rpm

Welding turntable - Welding rotary device with housingRound welding deviceLoad capacity approx. 50 kgTurning chuck diameter 300 mmTurning chuck speed 1.0-15 rpm. Mains connection 230 volts, 50 Hz- Spiral lathe chuck with inwardly stepped chuck jaws- Speed control infinitely variable via potentiometer- Drive via gear motor, direction of rotation left- Start via electric switch- Welding current transmission with sliding contact- Extraction connection 160 mm- Interior lightingDoor opening W x H 715 x 1060 mmInterior dimensions W x D x H

Vacuum pump, airframe pump, rotary vane pump ALCATEL type 100-132Fabr. No. 173082 - 3101 Year of manufacture: approx. 1995Volume flow: approx. 50 m3/hNegative pressure: 0.5 mbar (indicated on the nameplate)Negative pressure: - 0.9 bar (determined during test run)Engine power: 3 kWMotor speed: 1420 rpm. Mains connection: 400 volts, 50 Hz- Oil-lubricated rotary vane pumpDimensions L x W x H: 700 x 420 x 310 mmWeight: 78 kgGood condition; used

- Filter area 6 m2 - With residual filtration device - Machine in good condition

Manufacturer:Porta Model: TRO-06-N08 Year of Manufacture: 2012 Machine Type: Production Cell with CNC Rotary Transfer Machine Control: Porta Additional Components: - Filter System (Knoll VRF450, 2011) - Chain Conveyor (Knoll) - External Cooling Unit - Mist Extraction System - Workpiece Conveyor - Handling: 3x 6-Axis Robots (ABB) - Cleaning System (Mako) with Filter System - Small Pallet Turner (Mako) Find more here - / Contact us at -

Stations: 24, substations: 20, side stations: 20, axes: 2/station, collets: 24, production output single/double cycle: 120/240 pieces/min, stroke: 35mm, max. workpiece diameter: 25mm, spindle speed: 20000rpm, machine weight: approx. 2650kg, control: Mikron MAC 50, operating hours: approx. 17335h. Documentation available. An on-site inspection is possible.

Rotary Brush Screen Properties: Total height 1900 mm Overall length 580 mm Depth 500 mm

Rotary Brush Screen WESTFALIA BSB 200 Properties Type BOD 200 Machines No. 1 684 639 Total height 2500 mm Total length 600 mm Depth 600 mm Manufacturer: Westfalia Separator AG

Two identical rotary transfer machines Eubama including filtration systems are available. Workpiece diameter: 60mm, workpiece length: 320mm, clamping stations: 10, cycle rate: 20/min, spindle stroke: 100mm, drilling capacity steel/brass: 20mm/30mm, threading capacity steel/brass: M30/M40. Documentation available. An on-site inspection is possible.

Rotary valve 1.1 kW, as good as new

Key data: 250 , 7

Rotary screw air compressor. Pressure: 7.5 bar. Power: 136 kW. Rotation speed: 1488 r/min. With new screen.

Our KVK 5 is a semi-automatic rotary arm wrapper that, compared to our turntable wrappers, has the advantage that your pallets can be placed at ground level for the wrapping process. It is equally ideal for light and unstable as well as heavy packaged goods, as there are no centrifugal forces and no load-bearing capacity has to be observed. In addition, the KVK 5 model is equipped with a pre-stretch system for 250% elongation. With this pre-stretching system, you can produce up to 3.5 m of film on the pallet from 1 m of film on the roll and reduce your material consumption enormously. With the KVK 5, there is only a minimum application tension, so that even light packaged goods are not pulled off the pallet. Only the application and separation of the film has to be done manually with this wrapper. The machine weight of almost 1000 kg shows how solid and stable this winder is. ...

Description: Rotary Lobe Pump Flow rate: 2.0 m³/h Operating pressure test 0.8 bar Motor: 1.1 kW - With connections: suction side DN 40 and pressure side: DN 40 - With chassis mobile, 2 swivels and 2 fixed castors - With cable and CE plug 16A Dimensions: Length: 1100 mm Width: 620 mm Height: 1100 mm Note: Pump 100% tested, with function guarantee On request, infinitely variable with frequency converter for an additional cost. Connections can be changed at an additional cost.

Number Of Stations: 32 // Output (caps/min): 500

Number Of Stations: 24 // Output (caps/min): 600

Key data: 18

Machine name: Rotary Transfer Machine Pfiffner HB45 - 18 Hour Manufacturer: Pfiffner Machine number: HB45 Year of construction: 2006 Condition: used Functionality: Fully functional

1 POLYTEX pinking machine type ZH (Zigzag cutting) knife width 500 mm, serrated knife with 5 mm serration gauge, stroke 50 mm,

1 TUPESA rotary garment dyeing and washing machine type STONE 550, capacity up to 550 Kg (constructor indication and depending on articles) drum diameter 1950 mm x depth 1700 mm (volume 5000 L)

Properties: Length 780 mm Total height 2400 mm Motor power 0.25 kW Depth 780 mm Volume 931 L Steel as a material Description: Front flange - DN 50 reduction Flange rear - reduction DN 50 bottom: Disc valve DN 100 Motor: 0.25 KW

1 HOZA pinking machine type ZM 50 (Zigzag cutting), cutting width 500 mm, serrated knife with 4 mm serration gauge, manual actuation

1 POLYTEX "Waterfall Sample" Mounting Machine type FC, year 2017, semi-automatic "Waterfall" sample mounting machine of modern design for "Waterfall" sample strips. Electronic power traction feed with programmable logic controller (PLC).

1 POLYTEX pinking machine type ZP-V (Zigzag cutting), knife width 1020 mm, machine equipped with FASNACHT security light guards, stroke up to 65 mm height, up to 50 cuts per minute, PLC and inverter controlled. Fully automatic electric double feed system with 2 programs for simultaneous prechoice of sample length and width. Ensures highest degree of accuracy and operating comfort. Machine delivered with all possible extras/options namely: cutting height adjustment 0-1-2 mm (with or without carton underlay), increased hold-down force with hydraulic speed regulators, reinforced laser pointer.

1 POLYTEX "Waterfall Sample" Mounting Machine type FB, year 2017, semi-automatic "Waterfall" sample mounting machine of modern design for "Waterfall" sample strips. Electronic power traction feed with programmable logic controller (PLC) and touch screen. sample size width infinitely variable up to 800 mm, unlimited length, output single ply up to 900 stripes per hour, output two-ply up to 450 stripes per hour,

1 SUCHY fabric winding and cutting machine, year of manufacture 2015, roller surface width 220 cm, Unwinder with pneumatic expanding shaft for cardboard cores, Inspection station, Cross-cut knife holder (for manual cross-cutting), Rewinder with pneumatic expanding shaft for cardboard cores, Speed: 0–50 m/min

1 TUPESA sample rotary garment dyeing and washing machine type TSP-2-CP, high temperature high pressure machine, year 2001, capacity 2 Kg, drum diameter 470 mm, drum depth 250 mm, drum volume 42 L, dye cycle controller TUPESA type RS-1, drum rotation 0-28 rpm, machine equipped with centrifugation process of 450 rpm, 2 addition vats. Machine designed to work with temperatures up to 140 ºC. This type of machinery is suitable for dyeing all types of garments such as polyester, polyamides, synthetic blends, etc.

1 TUPESA rotary garment dyeing and washing machine type TSP-25-CP, high temperature high pressure machine, year 2008, capacity 25 Kg, drum diameter 1100 mm, drum depth 610 mm, drum volume 580 L, dye cycle controller TUPESA type RS-BASIC PLUS touch screen, drum rotation 0-28 rpm, machine equipped with centrifugation process of 700 rpm, 5 addition vats. Machine designed to work with temperatures up to 140 ºC. This type of machinery is suitable for dyeing all types of garments such as polyester, polyamides, synthetic blends, etc.

1 TUPESA rotary garment dyeing and washing machine type TSP-55-CP, high temperature high pressure machine, year 2004, capacity 55 Kg, drum diameter 1250 mm, drum depth 1100 mm, drum volume 900 L, dye cycle controller TUPESA type RS-1, drum rotation 0-28 rpm, machine equipped with centrifugation process of 650 rpm, 5 addition vats. Machine designed to work with temperatures up to 140 ºC. This type of machinery is suitable for dyeing all types of garments such as polyester, polyamides, synthetic blends, etc.

1 KAPPA pinking machine type 51N (Zigzag cutting), knife width 500 mm, power driven swatch and sample cutting machine, serrated knife with 4 mm serration gauge, year 2022, precise and accurate thanks to mechanical movement of the cutting board (turn wheel), exchange of knife is effortless and fast, motor 1,5 kW (2 HP)

1 HOZA (Germany) pinking machine type EZM 60 (Zigzag cutting), knife width 600 mm, electrically actuated, year 2019, laser for cutting line indication, machine controlled per PLC, knife with 4 mm serration gauge, up to 30 cuts per minute, 3 x 380 V, 50 Hz,

1 KAPPA pinking machine type 41L, cutting width 410 mm, machine supplied with 3 cutting knives: 1 serrated knife with 4 mm gauge serration installed, 1 serrated knife with 4 mm gauge serration spare, 1 flat straight knife, table size 900 mm x 435 mm, manual actuation

Bosch Aventics, R 412 000 393, R412000393, rotary module, Pemax: 8 bar Item condition: unused stock goods The goods come from a company liquidation from the automotive industry and were temporarily stored in paternosters. Slight traces of storage possible. H1R6A13K33 12_CK 2Kg You can find more rotary modules - new and used - in our shop! International shipping costs on request!

Bosch Aventics R412 000 393 Rotary Module Series RCM-SH R412000393 Item condition: Used, in perfect condition REGAL-K54-4-PD (BOR) You can find more rotary modules - new and used - in our shop! International shipping costs on request!

ALMIG Combi 15-10 rotary screw air compressor YOM 2012. Never used. Motor speed 3000 rpm Motor power 15 kW Volume flow m3/min- 1.84 Volume m3/hour- 110 Max. pressure 10 Bar. Air Receiver Capacity 500L

NNP Rotary dip tank Stainless rotary dip tank, variable speed, rotary drum length 900mm, rotary drum diameter 1100mm, central bottom drainage, previously used on fruit and veg, mobile, 3Ph

MINT CONDITION The robust positive displacement pump of the VT series is designed for continuous operation in the rough vacuum range. Its integrated vacuum regulating valve allows precise adjustment of the operating point. Thanks to self-lubricating sliders, the pump works almost maintenance-free and does not require an oil change. The oil-free operating principle makes them ideal for applications that require a clean environment and need to avoid contamination. In addition, noise-reducing measures ensure a pleasant working environment. Volume flow 50 Hz 25 m³/h Vacuum absolute 50 Hz 150 mbar Power 50 Hz 0.75 kW Sound level 50 Hz 62.0 dB(A) Volume flow 60 Hz 30 m³/h Vacuum absolute 60 Hz 150 mbar Power 60 Hz 0.90 kW Sound level 60 Hz 67.0 dB(A) Weight 26.0 kg with motor

The T 4.40 DSK is an oil-free combined pressure/vacuum pump for blowing and suction air. It is a robust and durable pump that is designed for continuous operation. This dry-running positive displacement pump works with self-lubricating gate valves made of a graphite composite and requires minimal maintenance. Volume flow 50 Hz 35 m³/h Pressure/vacuum relative 50 Hz ±0.6 bar Power 50 Hz 1.85 kW Sound level 50 Hz 68 dB(A) Volume flow 60 Hz 43 m³/h Pressure/vacuum relative 60 Hz ±0.6 bar Power 60 Hz 2.2 kW Sound level 60 Hz 68 dB(A) Weight 46... 49.5 kg with motor

Leather Spilitting Machine. Camoga 520L+AS. New in 2016, light use since 2023. 520mm working width.

Type AL 200 SD, inlet/outlet 200 mm, housing full stainless steel 1.4408 - flange connection DIN PN 10, Rotor volume 10.5 liters, direct heat SEW 0.55 KW, discharge speed 20 rpm

Volumetric pump, Link to manufacturer:: .fristam/product/fl2/, Link to the manufacturer:: .fristam/product/fl2/, Engine: North motor : 1.10 Kw , Rated rotation speed : 58 1/min , Nominal rotation speed : 58 1/min

- Filter area: 2.5m2 - Year of construction: 2001 - Vacuum pump in DIN 1.4404 - Incl. mixing tank with agitator. - With equipment for residual filtration - Flow rate (mucus): 450-500 l/h Dimensions: - Depth: 1400 mm - Length: 2100 mm - Height: 1900 mm - Machine with very few operating hours - Machine in perfect condition