tilting rotary table used for sale

Mobile s/s tilting device for pallet boxen, lifting height: 1700 mm, total dimensions: 1800 mm x 1500 mm x 2400 mm.

Tilting device for pallet boxen, fork length: 800 mm, total dimensions: 1140 mm x 1600 mm x 1310 mm.

Mobile s/s tilting device for pallet boxes, clearance: 1200 mm x 1000 mm x 800 mm, total dimensions: 2200 mm x 1500 mm x 1650 mm.

Manufacturer: unknown Volume: 200 L Diameter: 750 mm Depth: 600 mm Tank: stainless steel Double jacket: regular steel

Faceplate speed level 1: 0.005 0.25 Faceplate speed level 2: 0.019 1.02

Table load: 12 to.

Technical data: Table load 40 to. Table diameter 3,330 mm Speed 0.01 0.2 U/Min. Voltage 400 V / 50 Hz Power 6 KW To the weight of the table 15. Dimensions L x W x H 5,600 x 2500 x 3,200 mm

Technical data: -Load capacity 300 kg -Faceplate diameter 500 mm -Faceplate in grid levels of tilt - rotation Electr. infinitely variable approx. 0-1.2 m / min -Sweat power 650 A -Drive 220 V / 0.09 kW -Table height in horizontal position approx. 650 mm -Re + reverse - space requirement approx. B H 800 x 650 X 700 mm -Weight approx. 180 kg

Technical data: -Load capacity 30 kg -Faceplate diameter 280 mm -Faceplate swivel - faceplate RPM elect. infinitely variable - re + Li - run -Foot switch -Transmission of welding current 300 A -Drive 220 V - table height in horizontal position 360 / 890 mm -mobile base -3 jaw Chuck -Space requirement approx. B 550 x H 890 x T 550 mm -Weight approx. 50 kg

Technical data: -max load capacity 3000 kg -Faceplate cross 1600 x 1600 mm -Faceplate cross extension tubes - faceplate cross mot. adjustable 0-90 / 135 ° - rotation infinitely variable 0,01-4 U/min -Right - + rotation control -Transmission of welding current approx. 500 A -400 V - table height in horiz drive. Position without stand approx. 1200 mm -Table height at horiz. Position with frame approx. 2200 mm -Space requirement approx. B H 1600 x 1200 + 1000 X 2400 mm -Weight approx. 2700 kg

Welding turning and tipping-positioning table Technical data: -Load capacity at horizontal position 15000 kg -Load capacity in vertical position 10000 kg -Planpauc diameter 1850 mm -Plane disc with crane support can be swivelled continuously -Rotary motion electr. infinitely controllable -Right-Link Run -Drive 400 V -Ft remote taster -Massea cables -Welding current transmission 500 A -Table height at horizontal position 1850 mm -Space requirements approx. B 2450 x H 1850/2300 x T 3000 mm -Weight approx. 6000 kg

Mot. Welding turning and tilting table Make: DEUMA Type: DK 5000 S Machines - No.: 6890 Built: 1992 Offer number: 19110 Technical data: - max. Load capacity 5000 kg - Flat discs 1800 x 1300 mm - Flat disc hydr. swivel 0 - 90 / 135 ° - Rotational movement infinitely adjustable approx. R&din - Right - + Left-hand drive controllable - Welding current transmission approx. 500 A - Drive 400 V - Table height at horiz. Position approx. 1450 mm - E. hand-held remote button - Space requirement approx. W 2000 x H 1450 x D 3100 mm - Weight approx. 4000 kg

Clamping device with 3 pcs claw box double acting to compensate for material elongation during welding or heat development by working process New condition of the three claw boxes with screwed-on Interchangeable plate jaw system and hardened screwed clamping jaws . Size : Claw box; approx. 50 cm x 25cm (box) x 15 cm movable support part: approx.31 x23 cm Alternate plates size approx. 31 x 23 cm x height from 18 to 23 cm Spindle adjustment path. approx. 130 mm , voltage by spindle with compression spring preload system Accessories: 6 sets of alternating plate jaws as good as new

Specifications: - max. Load capacity 10000 kg - Flat discs 1400 x 1400 mm - Flat disc hydr. swivel 0 - 90 / 135 ° - Rotary movement infinitely variable 0.05 - 1.2 rpm - Right - + left-hand running controllable - Welding current transmission approx. 500 A - Drive 400 V - Table height at horiz. Position approx. 2500 mm - E. handheld remote button - Space requirement approx. W 2000 x H 2500 x D 2700 mm - Weight approx. 5200 kg

Specifications: - max. Load capacity 750 kg - Face disc diameter 750 mm - Hollow continuous spindle 65 mm - Face disc motorically swivel 0 - 90 ° - Rotational movement electr. infinitely variable 0.05 - 2.0 m/min - Right - + Left - Run - E. – Foot switch + hand remote control - Welding current transmission approx. 500 A - Drive 400 V - Table height with horizontal position 1050 mm - 3. Cheek lining - Space requirement approx. W 1600 x H 1050 x D 1600 mm - Weight approx. 400 kg

Specifications: - Load capacity 100 kg - Face disc diameter 400 mm - Faceplate infinitely tiltable - Table height with horizontal position approx. 470 mm - Rotational movement electr. infinitely variable 0 - 2.5 m/min - Welding current transmission 400 A - Drive 400 V - Right - Left rotation - Foot switch with foot roller controller for speed regulation - Ground cable - Space requirement approx. W 700 x H 700 x D 600 mm - Weight approx. 100 kg

Offer 23093 Specifications: - Load capacity 2000 kg - Face plate diameter 1300 mm - Face plate can be swivelled up to 135 ° via geared motor - Rotary movement electr. infinitely variable - Footswitch for right-hand rotation - left-hand rotation - Welding current transmission 650 A - Drive 400 V - Table height in horizontal position 1360 mm - Space requirement approx. W 1600 x D 2200 x H 1360 mm - Weight approx. 2.0 t

Offer 23207 Specifications: - Load capacity 2500 kg - Face plate dimensions 750 x 750 mm - Face plate can be swivelled up to 135 ° via geared motor - Rotary movement electr. infinitely variable - Footswitch for right-hand rotation - left-hand rotation - Welding current transmission 650 A - Drive 400 V - Table height in horizontal position 1090 mm - Space requirement approx. W 1150 x D 1250 x H 1090 mm - Weight approx. 1.2 t

Offer 21270 Technical data approx.: - max. load capacity approx. 2000 kg - Face plate diameter 1500 mm - Hydraulically swivelling face plate - Rotary movement electric with right - + counterclockwise rotation - hydr. Height adjustment of the face plate - min./ max. table height in horizontal position -ca. 870 / 1940 mm - Drive 400 V - Space requirement approx. W 3000 x H 870 x D 1750 mm - Weight approx. 2500 kg

Stock number: 3876 WELDING TURNTABLE Manufacturer: ESAB, Type: MLA 500 Machine NO.: 414767 Specifications: Large workpiece weight 500 kg Infinitely variable table rotations. pr/min Horizontal / Vertical Length: 1200 mm, Height: 800 mm, Width: 800 mm, Weight: 500 kg

Rotary actuator, hydraulic motor HKS rotary actuators Type: DA-H 125 - 180 Rotation angle 180 Operating pressure max. 210 bar Nominal torque max. approx. 5000 Nm Shaft diameter 70 mm Shaft pin length 140 mm Keyway width in the shaft 20 mm Flange diameter 222 mm Centering diameter 150 mm bolt circle 195 mm Connection thread 1/2 flange with 8 mounting holes 18 mm - 2 pieces screw-in fittings from 1/2 to 16S Overall length housing without drive shaft, without centering edge 384 mm Overall length housing with drive shaft 535 mm Weight 70 kg very good condition - New, unused from stock dissolution; used

Hydraulic rotary indexing table with face teeth FIBROTAKT Hydraulic rotary indexing table, rotary table type Y 13 630 FN3RA T6 Fabr. No. 11 136-0840 Year of construction 1981 Table diameter 630 mm Table height = height 250 mm Table passage 50 mm Switching angle 60 Hydraulic working pressure 30 bar - fixed switching step of 6 pitches - Face toothing for highest part accuracies - Hydraulic drive - Table structure with 6 hydraulic clamping devices (inner collets 90/100 mm) Space requirement table L x W x H 700 x 700 x 250 mm Space requirement with structure L x W x H 1380 x 1380 x 800 mm Weight table approx. 600 kg Weight with superstructure 1350 kg good condition; used

Vibration table / table We offer: used vibration table / table Condition: good, ready for use Manufacturer: unknown Year of constr.: 1995 estimated Dimensions: Width: 3500 mm Length: 8000 mm Height: 550 mm Steel quantity: approx. 8 mm Weight: estimated 3500 kg Vibration / vibration motors: 6 pieces Manufacturer: Bosch Type: Connection data: 250 V, 3 A; 1.0 KW; 200 Hz Speed: 5700 RPM The supply of vibration / vibration motors via a central frequency converter Bosch (for 2 toggle vibration tables and 6 vibration tables. This when purchasing multiple systems can be purchased: Technical data frequency: Produced for Bosch from the Flender sky / Tübingen Type: 2 GR132/135 (poorly readable) Motor: 11 KW, 380 V, 50 Hz; 22.5 A, 2880 rpm, cos.phi 0,89 Converter sec.: 11 / 12,5 KW; 250 V, 200 Hz, 2 26, 4 / 28; 9 A Control: Bosch Accessories: 2 or 4 forms for dominoes (see photos) More ...

Schwingkipptisch 1 / tilting table We offer: 6 used vibration table / table We offer: a used Schwingkipptisch 1 / tilting table 1 3.50 x 8.00 Technical data: Manufacturer: unknown Type: 8 x 3.5 m Machine number: unknown Year of built: unknown Documentation: not available Schwingkipptisch 3000 x 8000 x 8 mm designed for a traffic load estimated p 500 kp / m² = m², with formwork upper part completely stored on vrwindungssteifen Kippramen. Under construction from solid shape Weldment for establishing free to carry firm, level floor. Fully fitted with built-in tilting hydraulic for tilt at approximately 80 °, with 2 cylinders, electrical pump unit with oil tank, control and limit switch device and piped inside the tilt table construction. Ingredients: Vibration / vibration motors: 6 pieces Manufacturer: VEB Baustoffmaschienen Ludwigslust Type: A 800/3 28/71 No. o.a. 43190 ...

External task for double packages 1.0 m to 2.0 m able width. Heavy duty tilting table for double packages, infeed conveyor, tilting table, complete manipulation of lath, cross conveyor, complete control

Dimensions (L,W): - mm Weight: - kg adjustable height (yes/no): ja 0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data: -Lifting capacity 2000 kg -max load capacity horiz. 3500 kp -Faceplate hub 1750 x 1750 mm -Drehkreuzverängerungen -Faceplate geared motor Tiltable 0-90 ° -Rotation Electr. adjustable 0.2-1.5 m / min -Right - left rotation - welding current transmission 1200 A -400 V - table height in horiz drive. Position with frame approx. 2070 mm -Table height at horiz. Position without stand approx. 940 mm -Space requirement approx. B 1650 x H 1130 / 940 x H 2500 mm -Weight approx. 2.2 t

Technical data: -max load capacity 250 kg -Faceplate dimensions 500 mm -Faceplate you. Swiveling via Handwheel 0-135 ° -Rotation infinitely variable 0,01-4 U/min -Right - + reverse - transmission welding current approx. 400 A -Drive 220 V 1,1 kW -Table height in horizontal position approx. 800 mm -Space requirement approx. B H 600 x 500 X 1100 mm -Weight approx. 200 kg

Brand: Lisec Type: Tilting table Model: UKL-35/23VA Serial Number: 355.000.543 Construction year: 1999 Weight: 1,1 tons Power: 0,8 kVA Air pressure: 6 Bar Length mm: 3740 x 1600 x 2700 Working height: ± 53 cm Transport size L x W x H: 3,74 x 1,6 x 2,7 Min.-max. glass thickness: 3500 x 2500 Min.-max glass size: min. 350 x 180, max 23500 x 3500 Condition machine : Good Control type: B&R Electric. Connection: 400 +N Missing parts: None Documentation: No Instructions: No Electric diagram: Yes Parts list: Available by Lisec Available software: Does not apply Photos/film available: Photos and video available Part of the Lisec line, consisting of: Vertical washing machine (23014), Hand frame machine (23075), Tilting table (23076), Robot kit (23077), Cork pasting machine (23078), Press with gas station (23079, Line scanner (23080) and Turning Station (23124)  ...

Brand: Eder & Müller Type: KT tilting table Year of construction: Description: Pneumatic swivel from horizontal to vertical position. Support grid extendable from 1500 - 2300 width and 1000 - 1600 height. Grooved rubber pad (original underneath or foam pads) Dimensions: Table length: 1500 - 2300 Table level: 920 mm Table width: 1000 - 1600 Weight: 90 KG

Manafacture: Eco Cranes Dimensions: 1200 x 900 x 1000 mm Range of motion: 0° - 30°

Tilting table, clamping table PAGUS Clamping area: 285 x 260 mm 90° Tiltable 360° rotatable 3 grooves Groove width: 14 / 25 mm Dimensions: 370 x 300 x 175 mm

Tilting table, clamping table PAGUS Clamping surface: 200 x 200 mm 60° Tiltable 3 grooves Groove width: 14 / 24 mm Dimensions: 245 x 205 x 110 mm

tilting table, clamping table PAGUS clamping surface: 460 x 315 mm approx. 45° tiltable Dimensions: 460 x 380 x 100 mm

tilting table, clamping table PAGUS clamping area: 120 x 120 mm in two planes Tiltable -30° - 30° , 0° - 45° 2 grooves groove width: 10 / 18 mm with fine graduation ! Dimensions: 130 x 120 x 105 mm

Tilt table, clamping table PAGUS Clamping surface: 200 x 150 mm Working height at 0° Tilt angle: 110 mm Tilt angle: -30°... 0°...+60° 3 Grooves Groove width: 16 / 24 mm Groove depth: 21 mm used, tested ! Dimensions: 200 x 230 x 110 mm

tilting table, clamping table, sinusoidal table PAGUS clamping area: 250 x 180 mm approx. 90° tiltable 2 grooves 10 / 18 x18 mm 1 groove 14 x 5 mm base plate: 200 x 180 mm groove in base plate: 16 x 5 mm used, tested ! Dimensions: 300 x 250 x 80 mm

Tilting table, clamping table, sinusoidal table PAGUS Clamping area: 250 x 180 mm approx. 120° tiltable 2 grooves 10 / 18 x18 mm Base plate: 250 x 180 mm Groove in base plate: 14 x 5 mm used, tested ! Dimensions: 320 x 180 x 85 mm

Up to 100 products can be produced on one table. • automatic or semi-automatic production lines; • EU-standard; • Warranty 24 months. The tables are made of sturdy steel construction covered with steel plate. The service life of vibrating tables is up to 30 years. Tables can be equipped with hydraulic tilt function, built-in heating pipes and vibrators. The sizes of the tables can be ordered for the required panel sizes. SUMAB equipment for the production of interior and exterior wall panels includes: • various types of circulating and tilting vibration tables • turnkey house-building plants; • the possibility of full or partial reconstruction of old enterprises and the installation of modern equipment; • profitability of production, reduction of economic and production costs; • the optimal solution to start panel construction of high-quality and modern hous ...

tilting table, clamping table STANKO Model 370-P clamping surface: 500 x 200 mm approx. 45° tiltable without graduation 3 grooves groove width: 12 / 21 mm groove depth: 18 mm used, checked ! very good condition ! Dimensions: 520 x 210 x 105 mm

tilting table, clamping table RECORD clamping area: 290 x 285 mm 90° Tiltable 360° rotatable 3 grooves groove width: 14 / 25 mm groove depth: 21 mm mounting holes in base plate: Ø 17 x 20 mm ( U-shape ) used, checked! Dimensions: 380 x 370 x 175 mm

tilting table, clamping table, sinusoidal table PAGUS clamping surface: 250 x 180 mm table height: 82 mm approx. 80° tiltable groove width: 10 / 18 mm groove depth: 17 mm Base plate: 250 x 178 mm Mounting holes in footplate: 2x Ø 14 x 20 mm ( U-shape ), 4x Ø 12 x 14 mm ( U-shape ) used, tested ! Dimensions: 295 x 200 x 85 mm

tilting table, clamping table, sinusoidal table PAGUS clamping surface: 250 x 180 mm table height: 78 mm approx. 50° tiltable groove width: 10 / 18 mm groove depth: 17 mm Base plate: 305 x 180 mm Mounting holes in base plate: Ø 14 x 20 mm ( U-shape ) used, tested ! Dimensions: 305 x 230 x 80 mm

tilting table, clamping table, milling table PAGUS clamping surface: 207 x 145 mm material thickness: 13 mm approx. -10° to +190° tiltable working height: 57 mm above upper edge base plate (tilt angle 0°) ) pivot point: 57 mm above upper edge base plate base plate: 297 x 200 mm material thickness: 14 mm used, tested ! Dimensions: 297 x 200 x 95 mm

tilting table, clamping table, milling table PAGUS clamping surface: 205 x 145 mm material thickness: 14 mm approx. -10° to +190° tiltable Working height: 60 mm above upper edge base plate (tilt angle 0°) ) pivot point: 57 mm above upper edge base plate base plate: 300 x 200 mm material thickness: 20 mm used, tested ! Dimensions: 300 x 200 x 95 mm

Tilting table, clamping table PAGUS clamping surface: 255 x 250 mm working height at 0° tilt angle: 158 mm tilt angle: 0° - 90° groove width: 12 / 24 mm, groove depth: 23 mm mounting surface1: 222 x 158 mm, material thickness: 20 mm mounting surface2: 222 x 257 mm, material thickness: 18 mm 6x slotted hole: Ø 14 x 35 mm 1x U-hole: Ø 17 x 20 mm used, tested ! Dimensions: 310 x 255 x 158 mm

Serial Number: 131BMA-328 Construction year: 1992 Weight: 2,5 tons Power: 6 kVA Air pressure: 6 bar Length mm: 450 Width mm: 350 Height mm: 350 Working height: 90 cm Transport size L x W x H: 4,5 x 2,5 x 2,5 Min.-max glass size: 321 x 255 Condition machine : Perfect Control type: Relay Electric. Connection: Relay Missing parts: None Documentation: No Instructions: Not necessary Electric diagram: Yes Parts list: Yes Photos/film available: Photos available for more information, please mail us: salestecfort.nl

2 Gebr. Hydraulic Tilting Tables Dimensions table 1 : 14.50 x 4.50 m Dimensions table 2 : 14.00 x 4.20 m with holding bras for vibrators with 2 hydraulic rams.

1 Gebr. hydraulic tilting table - Dimensions: 16.30 x 3.50 m - Single-sided upstand: 30 cm - height of the table. 85 cm - Steel flooring - the table needs to be reground - without vibrator, but with holding brachets with 3 hydraulic rams

5 used tilting tables = Formwork width: 2.85 m Scarf length: 12 m Parapet height: 0.23 m Steel Surfaces Condition: Good The load capacity per square meter is 550 kg, walls up to a thickness of 24 cm were made. Incl. heating coils for hot water, incl. 4 hydr. Stamp