three used for sale

Key data: 4 KW

The Nord SK 112M/8-2 BRE 40 TF is a pole-switchable three-phase asynchronous motor from NORD DRIVESYSTEMS. Technical details Motor type: Pole-switchable motor for two fixed speeds. Number of poles: 8/2-pin (low/high speed). Power: Typically approx. 4.0 kW at high speed (reference value for 112M size). Brake (BRE40): Equipped with a spring-applied brake and a braking torque of 40 Nm. Motor Protection (TF): Integrated thermistor (PTS) to monitor winding temperature. Additional options (WUTFZ): Customer-specific winding or fan modifications (often for operation on frequency converters or special cooling types). UNUSED

Total Weight: 2,800 kg Output Current: 288 A Output Voltage: 400 V Output Frequency: 50 Hz Rated Power: 160 kW (217.54 hp) Rated (full) power: 160 kVA Constant Power: 160 kW (217.54 hp) Maximum speed: 1,500 rpm

Power 170 kW 440 V 1500 r/m 420A Class B made in Sweden

Three-jaw chuck, three-jaw lathe chuck -screwable interchangeable jaws -Mouth size: Ø 200 mm -Weight: 12 kg

Three-jaw chuck Three-jaw lathe chuck -Mouth size: Ø 200 mm -without interchangeable jaws -Weight: 16 kg

Precision three-jaw chuck, chuck, faceplate, 3-jaw chuck -DHK: 200x3 -TGL: 30-2333 -Mouth size: Ø 200 mm -Bakes: individually and fully adjustable -Interchangeable jaws -Through hole: 55 mm -Recess: Ø 160 mm -Quantity: 1x food available Price: per piece -Weight: 16 kg

A four-roll plate bending machine Kramer is available. Working width: 2000mm, max. plate thickness: 3mm, power: 3kW. An on-site inspection is possible.

sheet width: 3355 mm plate thickness: 63,5 mm roll diameter: 686 mm voltage: 400 V total power requirement: 150 HP weight of the machine ca.: 95 t dimensions of the machine ca.: 62 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stamford AC Generator PE734C2 Electricity generator unknown year of construction with approx. 63,000 operating hours, 415 volts V/50 Hz. Manufacturer: Stamford Model No.: PE734C2 Type: AC Synchronous Generator Serial Number: A12K489419 Power [KVA]: 1,445 Voltage [V]: 415 Frequency [Hz]: 50 Current [A]: 2.010 Speed [1/min]: 1,500 Year of manufacture: unknown Operating hours [h]: approx. 63,000 Weight [kg]: 3,000 Dimensions LxWxH [cm]: 190 x 95 x 135

Three-phase synchronous motor, geared motor, electric motor, servo motor -Manufacturer: Baumüller, Servomotor three-phase synchronous motor -Type: DSOG 100-K -Speed: 3000 rpm -Power: 11 kW -Transmission: SEW type R82 LP90 i= 10.22 -Speed: 1400 / 137 rpm -External fan: W2S130-AB03-10 -Shaft: Ø 50 x 100 mm -Design: B3 -Brake -Protection class: IP 54 -Number: 3x motors available -Price: per piece -Dimensions: 1050/285/H345 mm -Weight: 116 kg

Three-phase synchronous motor, geared motor, electric motor -Three-phase synchronous motor: Baumüller type DSOG 71-S -Transmission: SEW-Eurodrive type KA46 LP90 -Speed: 3000 rpm -Power: 6.8 kW -Brake -External fan -Design: Hollow shaft -Shaft diameter: Ø 35 mm -Brake -Protection class: IP 54 -Weight: 50 kg -Number: 4x motors available Price: per piece

Three-phase synchronous motor, geared motor, electric motor -Three-phase synchronous motor: Baumüller type DSOG 100-M -Transmission: SEW-Eurodrive type KA86 LP112 -Speed: 3000 rpm -Power: 22 kW -Brake -External fan -Design: Hollow shaft -Shaft diameter: Ø 65 mm -Brake -Protection class: IP 54 -Number: 4x motors available Price: per piece -Dimensions: 1150/300/H400 mm -Weight: 180 kg

Three-phase synchronous motor, geared motor, electric motor -Three-phase synchronous motor: Baumüller type DSOG 100-S -Transmission: SEW-Eurodrive type -Speed: 3000 rpm -Power: 18 kW -Brake -External fan -Design: Hollow shaft -Shaft diameter: Ø 70 mm -Brake -Protection class: IP 54 -Number: 3x motors available Price: per piece -Weight: 150 kg

Three-phase synchronous motor, geared motor, electric motor -Three-phase synchronous motor: Baumüller type DSOG 100-K -Transmission: SEW-Eurodrive type KA86 LP112 -Speed: 3000 rpm -Power: 11 kW -Brake -External fan -Design: Hollow shaft -Shaft diameter: Ø 70 mm -Brake -Protection class: IP 54 -Weight: 150 kg

Three-phase synchronous motor, geared motor, electric motor -Three-phase synchronous motor: Baumüller type DSG 56-S -Gearbox: Nord SK. 02053F-IEC 80 -Speed: 6000 rpm -Power: 2.9 kW -Brake -Speedometer -Shaft diameter: Ø 25 mm -Brake -Protection class: IP 54 -Dimensions: 630/250/H190 mm -Weight: 35 kg

Truss tower triangular made of three-point crossbeam, leg dimension approx. 4.5m, approx. 5m high, floor connector

Key data: 13 KW, 1175 1/min

- Motor as shown in pictures - Technical data according to nameplate - Unused, mint condition

Brand: CECCATO OLINDO Model: MAGIC (Excavator) Type: Electric pellet mill Engine power: 7.5 kW Power supply Upper hopper with protective grid Integrated control box with emergency stop Full casing Mounted on wheels with handling handle Auction-ID: A1-45418-11

Brand: CECCATO OLINDO Model: MAGIC (Excavator) Type: Electric pellet mill Engine power: 7.5 kW Power supply Upper hopper with protective grid Integrated control box with emergency stop Full casing Mounted on wheels with handling handle Auction-ID: A1-45418-8

Model: LDCFS420B Type: Electric mill refiner Electric motor: 11 kW (7.5 kW version possible) Refining capacity: Approx. 250 kg/h from forest chips or pre-shredded wood 250–500 kg/h (7.5 kW version) 250–700 kg/h (11 kW version) Compatible materials: forest chips, pre-shredded wood Belt drive Grinding chamber equipped with rotor and hammers Separation cyclone with exhaust duct Integrated control cabinet with: Start/Stop Buttons Emergency stop Ammeter Voltmeter Dimensions (L × W × H): 1240 × 1000 × 1200 mm Weight: 270 kg (depending on version up to 320 kg) Auction-ID: A1-45418-7

Fliegl TDK 140 – tandem three-way tipper (new machine built in 2025) General data • Engine type: three-way tipper • Manufacturer: Fliegl Agrartechnik GmbH • Model: TDK 140 • Year of construction: 2025 • Type: Tandem • Permissible Total weight: approx. 12,000 kg • Condition: New machine Technical equipment • Three-way tilt function • Tandem landing gear for high stability • Robust steel bridge • High side walls with attachment • Swinging tailgate • Hydraulic tipping system • Air brake system • Tyres: 15.0/70-18 • Lighting system and warning signs Condition • Visual condition: as good as new • Technical condition: perfect • Ready to use Stable and versatile three-way tipper – ideal for agricultural transport work and high payloads. Contact Now Kristina Kreimer – Surplex / TBAuctions k.kreimer@tbauctions. ...

Dim. per table approx. height 47 and Ø76 cm. - height 39 cm. and Ø56 cm. - height 35 cm. and Ø41 cm. Auction-ID: A1-44654-136

Pühringer 3818 – Three-way tipper 7 t (new machine) General data • Engine type: three-way tipper • Manufacturer: Pühringer • Model: 3818 • Year of construction: 2024 • Permissible Total weight: 7,000 kg • Net weight: approx. 1,340 kg • Payload: approx. 5,660 kg • Condition: New machine Technical equipment • V-frame made of torsion-free C-profile (210 / 75 / 6 mm) • Axle cross-section: 70 mm, track width: 1,500 mm • Brake system RFA, brake 300 × 80 • Inner bridge length: 3,780 mm • Bridge width inside: 1,750 mm • Overall length: 5,450 mm, total width: 1,910 mm • Platform height: approx. 1,030 mm • Steel bridge sheet 4 mm, folded from one piece • Base side wall 500 mm height • Swing wall at the rear with central locking • Grain pusher with lever operation • Removable corner posts at the rear, front side wall removabl ...

Operating characteristics, o Feeding in closed pipe., o Outlet is guaranteed under pressure by 2 centripetal pumpsmade in AISI 304., o All material in contact with the product is made in stainless steel AISI 304 or higher., o The outflow system is completed with 2 pressure gauges in AISI 304 stainless steel and 2 micrometric valves to modulate the pressure of the lean and the concentration of the cream., o The sludge discharge is electronically controlled (through a hydrodynamic circuit) and takes place without interrupting the working process. The time interval between the single discharges can be programmed according to the characteristics of the product., o There is an automatic washing program at the end of the work in a closed cycle (CIP). Therefore, disassembly of the bowl is not required., Construction features and equipment, o Platform: fully made in stainless steel AISI 304 with ...

Operating characteristics, o Feeding in closed pipe., o Outlet is guaranteed under pressure by 2 centripetal pumpsmade in AISI 304., o All material in contact with the product is made in stainless steel AISI 304 or higher., o The outflow system is completed with 2 pressure gauges in AISI 304 stainless steel and 2 micrometric valves to modulate the pressure of the lean and the concentration of the cream., o The sludge discharge is electronically controlled (through a hydrodynamic circuit) and takes place without interrupting the working process. The time interval between the single discharges can be programmed according to the characteristics of the product., o There is an automatic washing program at the end of the work in a closed cycle (CIP). Therefore, disassembly of the bowl is not required., Construction features and equipment, o Platform: fully made in stainless steel AISI 304 with ...

Operating characteristics, o Feeding in closed pipe., o Outlet is guaranteed under pressure by 2 centripetal pumpsmade in AISI 304., o All material in contact with the product is made in stainless steel AISI 304 or higher., o The outflow system is completed with 2 pressure gauges in AISI 304 stainless steel and 2 micrometric valves to modulate the pressure of the lean and the concentration of the cream., o The sludge discharge is electronically controlled (through a hydrodynamic circuit) and takes place without interrupting the working process. The time interval between the single discharges can be programmed according to the characteristics of the product., o There is an automatic washing program at the end of the work in a closed cycle (CIP). Therefore, disassembly of the bowl is not required., Construction features and equipment, o Platform: fully made in stainless steel AISI 304 with ...

Operating characteristics, o Feeding in closed pipe., o Outlet is guaranteed under pressure by 2 centripetal pumpsmade in AISI 304., o All material in contact with the product is made in stainless steel AISI 304 or higher., o The outflow system is completed with 2 pressure gauges in AISI 304 stainless steel and 2 micrometric valves to modulate the pressure of the lean and the concentration of the cream., o The sludge discharge is electronically controlled (through a hydrodynamic circuit) and takes place without interrupting the working process. The time interval between the single discharges can be programmed according to the characteristics of the product., o There is an automatic washing program at the end of the work in a closed cycle (CIP). Therefore, disassembly of the bowl is not required., Construction features and equipment, o Platform: fully made in stainless steel AISI 304 with ...