136,113 used machines on RESALE, but how to find them? Machine Search
Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting attachment, quick-change thread cutting chuck -Manufacturer: Bilz, Thread cutting chuck, quick-change thread cutting chuck, 3 pieces -Type: WFLK 115 B TR 28X2 -Submission/Price: complete -Transport dimensions: 120/40/H135 mm -Weight: 1.9 kg
Ball valve, ball valve with internal thread -Condition: very good, unused, original packaging -Material: Pressed brass -Internal thread: 2 inch -full: passage, full ball -Number: 63 ball valves available -Price: per piece -Weight: 2.1 kg
Total 2 HeliCoil plus sets; unused; Art.No: 63300 4185 114 9100; further details see photos
Total 2 HeliCoil plus sets; unused; Art.No: 63300 4185 114 9100; further details see photos
Thread cutting head with Strehler jaws, thread cutting die, thread cutting machine, pipe thread cutting -Manufacturer: Alrowa, thread cutting head with Strehler jaws -Type: No6 -inch thread: 1 1/2 - 3 -Accessories: incl. 3 sets of Strehler jaws, see photos -Dimensions: 950/200/H150 mm -Weight: 15.7 kg
Thread cutting head with Strehler jaws, thread cutting die, thread cutting machine, pipe thread cutting -Manufacturer: Alrowa, thread cutting head with Strehler jaws -Type: No23 -inch thread: 1/4 - 1 1/2 -Dimensions: 730/150/H125 mm -Weight: 8.0 kg
The machine has been professionally retrofitted, with an upgraded control system featuring a digital operator panel on the left side and improved safety guards, and was fully operational until a few years ago. Without nameplate or documentation. An on-site inspection is possible.
Thread gauge ring, thread gauge ring, go gauge ring, reject gauge ring -Threaded training rings: 11 good training rings -Thread sizes: M12 to M55 -Nominal dimensions: see photos -Submission/Price: complete -Transport dimensions: 100/100/H160 mm -Weight: 3.3 kg
Thread gauge, fine thread- Gut-Lehrring ERHOLLAND M 30 x 1,5 Ø 64 x 16 mm used, tested ! Dimensions: 70 x 70 x 20 mm
30mm, 40mm, 65mm, 80mm. Auction-ID: A1-41281-530
Tapping Machine PROGRESS MWB Model 71 1/2 to 2 inch 220 V 1.05 kw with sawing device ! with 2nd set of jaws and 2nd cutting head !' Dimensions: 950 x 500 x 1200 mm
Load block thread with screw RUD 2 pcs. VLBG 0.63t M10 8500822 Load capacity: 0.63 t New ! Dimensions: (box) 220 x 100 x 100 mm
31mm, 42mm Auction-ID: A1-41281-528
30mm, 40mm, 50mm, Auction-ID: A1-41281-529
Tapping Machine PROGRESS MWB Model 71 1/2 to 2 inch 220 V 1.05 kw with sawing device ! with 2nd set of jaws and 2nd cutting head !' Dimensions: 950 x 500 x 1200 mm
Thread Repair Set BÖLLHOFF HeliCoil M6-M14x1,25 Dimensions: 350 x 260 x 90 mm Used and incomplete!
Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: Bilz, Thread cutting chuck MK3 mount -Type: DSPL 3 -Cutting range: M 9 - M 24 -Bore: Ø 19 mm -Dimensions: Ø 92 x 282 mm -Weight: 5.4 kg
Ratchet thread cutter with 6 cutting heads RIDGID D 286 30118 with cutting heads 12-R 1/2, 3/4, 1, 11/4, 11/2, 2 very good condition !' Dimensions: 750 x 300 x 110 mm
Thread Repair Kit BÖLLHOFF HeliCoil M16 x 16 Dimensions: 230 x 190 x 50 mm
Threaded Screw, Threaded Bracket Gauge, Threaded Screw Gauge with Fine Knife CARL ZEISS Range: 100 - 150 mm M 0.6 - M 10 Measuring Tip M 0.4 - 0.6 is missing ! with protective box used, tested ! Dimensions: 445 x 180 x 50 mm
Thread Repair Kit BÖLLHOFF HeliCoil M20 x 20 Dimensions: 265 x 230 x 50 mm
Thread gauge set, pipe thread 1x good gauge ring and 1x rejects gauge ring PAGUS G 1/2 Gut gauge: Ø 54 x 16 mm Reject ring gauge: Ø 54 x 12 mm used ! Dimensions: 60 x 60 x 30 mm
Thread Repair Kit BÖLLHOFF HeliCoil M22 Dimensions: 265 x 230 x 50 mm
Thread Repair Set BÖLLHOFF HeliCoil M24 Dimensions: 265 x 230 x 50 mm
Holder for tapping head WMW Z39 Outer diameter: 180 mm Inner diameter: 45 mm Dimensions: 180 x 180 x 125 mm
Tapping Machine WMW, ABW GB2 MK 2 M3 - M8 with inserts Ø 2.5 / 3.5 / 4.0 / 4.5 / 5.5 / 6.0 mm used, tested ! Dimensions: 250 x 95 x 65 mm
Tapping Device, Tapping Head GEFRIEBA MK3 for taps with square from 4 to 20 mm in wooden box used, tested ! Dimensions: 345 x 135 x 135 mm
miscellaneous Different holders with Recordings
Hydraulic Tapping Machine with Capacity M3 to M20 (M24) -Without table -Projection approx. : 1800mm -With digital depth control
Splicing machine with glue thread Make: Casati Type: Z 1000 New machine Technical details: Arm length: 1.000 mm Veneer thickness: 0,4 - 1,5 mm Feed speed: 8 - 18 m/min. Overall dimensions: 1.350 x 500 x 1.300 mm Equipped with: - Key pad of the electronic control device for the heating temperature setting - Electronic digital read-out for an accurate monitoring of the heating temperature - Handwheel of the motor speed control for the stepless adjustment of feed speed - Knob of the motor speed electronic control for the stepless adjustment of oscillation angular speed of the heating arm independent of the linear feeding speed (zig-zag pitch) - Glue thread heater by electric resistance - Electronic adjustment of the heating temperature of the thread with accuracy ± 1°C - Electronic unit with stored control program - Separating fence with pressure wing - Holder of t ...
Gewinde-Ø: 52 mm threading length: 500 mm thread pitch: entsprechend Hohlspindel -Ø: 54 mm spindle turning speed range: 25 - 140 U/min turning speeds:: 6 Stufen voltage: 380 V / 50 Hz main drive motor: 3 kW total power requirement: 4,5 kW weight of the machine ca.: 0,75 t dimensions of the machine ca.: 1,0 x 1,8 x 1,4 m • with driven workpiece clamping, • threading head Z 52, • cooling device, • 2 sets of chaser holder,size: Z52/2B, + 21B • 5 sets of chaser jaws,pitch 1 - 2,5 mm Machine is in a good condition. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
workpiece diameter: 25-90 mm threading length: 3000 mm thread pitch: 2-16 mm total power requirement: 25 kW weight of the machine ca.: 10,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
thread dia.: 254 mm grinding length: 350 mm thread pitch: 51 mm Control: SIEMENS S 8 total power requirement: 12 kW weight of the machine ca.: 5000 kg dimensions of the machine ca.: m B A H M Ü L L E R Automatic Internal Thread Grinding Machine Model IPE 12 i.S. Year 1985 Serial No. 103174 _______________________________________________________ workpiece Ø, max. 300 mm workpiece length, approx. 350 mm height of centers (WP spindle/grinding spindle) 300 mm table stroke approx. 450 mm thread diameter ground max. approx. 254 mm thread diameter ground min. approx. 25,4 mm thread length ground in one setting max. 250 mm Lead range, max. 51 mm Lead angle max. 10 ° Total electrical load, approx. 12 kW - 380 V - 50 Hz Weight, approx. 5,000 kg ...
workpiece diameter: 30 mm workpiece diameter: 30 mm threading length: 110 mm threading length: 110 mm thread pitch: 0,5-2,75 mm/GG thread pitch: 0,5-2,75 mm/GG total power requirement: 4,5 kW total power requirement: 4,5 kW weight of the machine ca.: 1,7 t weight of the machine ca.: 1,7 t dimensions of the machine ca.: m dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
workpiece diameter: 460 mm threading length: 900 mm thread pitch: 100 mm total power requirement: 10 kW weight of the machine ca.: 8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
thread dia.: 3 - 10 mm Tools speed: 120 - 600 U/min table-size: 250 x 350 mm throat: 250 mm voltage: 380 V threading length: 80 mm total power requirement: 0,55 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 0,7 x 0,7 x 1,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
thread dia.: 12 mm : max. 600 U/min. working area: max. 1100 mm engine output: 0,6 kW weight: 30 kg Electric tapping machines for M3 - M12 threads, 8 pcs. quick-change chuck with slipping clutch. Adjustable via display: variable speed, adjustable depth, choice of Main direction of rotation, torque. Documentation in English! Options: - Clamping table with T-slots: 990x700x800mm. - Magnetic base. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
thread dia.: M3 - M16 mm : max. 187 U/min. working area: 180 - 2000 mm engine output: 0,7 kW Electric tapping machines for M3 - M16 thread, Angle adjustable. 9 pcs. Quick-change chuck with slip clutch. Adjustable via display: variable speed, adjustable depth, material selection, choice of Main direction of rotation, thread selection. optional: Clamping table with T-slots: 990x700x800mm. Magnetic base. Also available: M14 to M24 and M27 to M33. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
thread dia.: M10 - M33 mm : 35/115 U/min. : 320 Nm air pressure: 6 - 8 bar working area: 400 - 2000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
thread dia.: M3 - M8 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
thread dia.: - mm threading length: - mm throat: ca. 2000 mm total power requirement: 0 kW weight of the machine ca.: 0,2 t dimensions of the machine ca.: 1,30,82,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Gewinde-Ø: 52 mm threading length: 500 mm thread pitch: entsprechend Hohlspindel -Ø: 54 mm spindle turning speed range: 25 - 140 U/min turning speeds:: 6 Stufen voltage: 380 V / 50 Hz main drive motor: 3 kW total power requirement: 4,5 kW weight of the machine ca.: 0,75 t dimensions of the machine ca.: 1,0 x 1,8 x 1,4 m • with pneumatic workpiece clamping, • threading head Z 52, • cooling device, • 2 sets of chaser holder,size: Z52/2B, + 21B • 5 sets of chaser jaws,pitch 1 - 2,5 mm Machine is in a good condition. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Five older thread milling machines Mikron are available, 2x Hydraulic Thread Milling Machine Mikron 132.02, 1x Mikron 132-01, 1x Mikron 104-01 and 1x Short Thread Milling Machine Mikron 106.01, an on-site inspection is possible.
STANKO 5K822B Thread Grinding machine Grinding diameter 200 mm Grinding length 500 mm Max. grinding wheel diameter 400 mm Max. workpiece weight 30 kg Machine weight: approx. 4500 kg -for grinding of cylindrical and tapered, left and right, single-start and multi-start internal and outernal threads of various profiles.
maximum number of results exceeded
please refine your search
10 € 
