thread rolling machine used for sale

thread dia.: 12 mm stroke: / mm table-size: / mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: 16 mm stroke: / mm table-size: / mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: bis M 24 turning speeds: max. 280 U/min thread: M5 - M24 working area: 2050 Rmax. work height max.: 900 mm table surface area: 700 x 900 mm oil volume: 100 l engine output: 3.0 kW weight - pallet system: 280 kg Equipment: - electro-hydraulic tapping machine - Large working range (max. radius 2050 mm) Smooth swivel movement, e.g. due to built-in gas pressure dampers - Mobile machine base frame Oil tank hydraulic unit integrated in the base frame Hydraulic pressure gauge - Vertical / horizontal thread cutting possible - Connection cable with 16A plug Special accessories included in the scope of delivery : - Tap quick-change inserts according to DIN 376 . M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M22 - Infinitely variable speed adjustment incl. digital display - Minimum quantity lubrication (spray oiler/compressed air) - T-slot clamping table - Tapping head can  ...

thread dia.: bis M 36 turning speeds: max. 150 U/min thread: M5 - M36 working area: 2050 Rmax. work height max.: 900 mm table surface area: 700 x 900 mm oil volume: 100 l engine output: 4.0 kW weight - pallet system: 320 kg equipment: - electro-hydraulic tapping machine - Large working range (max. radius 2050 mm) Smooth swivel movement, e.g. due to built-in gas pressure dampers - Mobile machine base frame Oil tank hydraulic unit integrated in the base frame Hydraulic pressure gauge - Vertical / horizontal thread cutting possible - Connection cable with 16A plug Special accessories included in the scope of delivery : - Tap quick-change inserts according to DIN 376 . M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M 22 . M27 / M30 / M33 / M36 - Infinitely variable speed adjustment incl. digital display - Minimum quantity lubrication (spray oiler/compressed air) - T-slot clamping  ...

thread dia.: bis M 16 mm turning speeds: 0 - 600 U/min thread: M5 - M16 working area: 2050 Rmax. working area: 500 Rmin. table surface area: 900 mm engine output: 3,0 kW weight: ca. 250 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: M6 - M36 mm turning speeds: 156 U/min radius: 1200 mm angle adjustable from - to: 0 - 90 Grad weight of the machine ca.: 0,4 t dimensions of the machine ca.: 1,4 x 0,1 x 0,7 m Electric tapping machine / 4450136SET Fast and precise thread cutting with freely positionable swivel arm - The machine head can be swiveled from 0 to 90 degrees - Quick change chuck with slip clutch for safe thread cutting without Risk of breakage - Right-left rotation can be selected on the machine head - Setting of thread size, speed, pitch and cutting depth via Touchscreen on the swivel arm - Manual mode: the stops after the set cutting depth is reached Spindle automatic, forward and reverse must be activated manually. - Automatic mode: changes after the set cutting depth is reached the machine automatically from the forward to the return - ideal for that Thread cutting of several blind holes Incl. ...

max. workpiece diameter: 500 mm threading length: 1250 mm max. module: 10 min. module: 1 workpiece dia. over saddle: 250 mm spindle bore of workspindle: 102 mm quill stroke: 100 mm workpiece turning speeds: 0,0032 - 2,6 U/min feeds - rolls: 0,027 - 5,66 mm/WU feeds - longitudinal: 0,3 - 198 mm/min main drive: 4 kW swivel angle for work spindle: 90/120 ° diameter of hob: 150 mm milling width: 100 mm hob turning speeds: 45 - 560/900 U/min total power requirement: 9,5 kW weight of the machine ca.: 4,2 t Machine equiped with: - Heavy Duty Hob Head ApFw - change gears - Milling Head ApFF - Single Indexing Device ETE - Bush Rest - Coolant Tank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MONNIER + ZAHNER M 600 ist eine Gewindewirbelmaschine mit hoher Präzision, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitsmöglichkeiten: Modul max. 1 mm; Aussengewinde auf Durchmesser von 3 bis 13 mm; Gewindelänge bis 110 mm; max. Werkstücklänge 300 mm. Technische Daten: Werkzeugspindeldrehzahlen stufenlos 4.000–6.000 t/min; Anschluss 50 Hz, 3x 380 V; Spindelmotor 1 kW; Maschinengewicht ca. 1.500 kg; Abmessungen L 1800 x B 1400 x H 2000 mm. Zubehör: Lampe und Zustandsleuchte. Erreicht enge Toleranzen; typische Branchen: Automobil, Uhrmacherei, Werkzeugmaschinenbau, Luft- und Raumfahrt, Medizintechnik Technische Daten ohne Gewähr

REISHAUER US ist eine Gewindeschleifmaschine, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazität: Schleiflänge 450 mm, Einspannlänge 1055 mm, Werkstück-Ø 250 mm, Gewinde-Ø 2–250 mm, Spindelbohrung 45 mm, Gewicht zwischen Spitzen 200 kg, Steigung bis 100 mm, Modul max 10, Schleifscheiben Ø 280–350 mm Breite 4–40 mm. Techn.: Schleifscheiben 6 Stufen 1700–2540 t/min; Werkstückspindel 27 Stufen bis 160 t/min; 3x380 V 50 Hz; Schleifspindel 4 kW; Gesamtleistungsbedarf 15 kVA; Maschinengewicht ~4700 kg; Abmessungen 3300×1930×1800 mm. Zubehör: Kühlung, Satz Schleifscheiben/Flansche, automatische Profilier/Abrichtvorrichtung, Radien-Abrichtvorrichtung, mitlaufende Lünette, Satz Wechselräder, Satz Spitzen, Kühlmittel-/Nebelsaugung, Lampe. Geeignet für enge Toleranzen in Automotive, Uhrenindustrie, Werkzeugbau, Luftfahrt, Medizintechnik. Technische D ...

HUAWIN WM 1560 ist eine Schneckenfräsmaschine von hoher Präzision, Genauigkeit und Zuverlässigkeit. Kapazitäten: Ø max 150 mm, Werkstücklänge 600 mm, Modul max 5, Fräser Ø100–135 mm, Bohrung 25.4/31.75 mm, Verfahrwege X150 Y100 Z600 A +90/-35. Daten: 360 t/min, Frässpindel 4 kW, Werkstückspindel 10 t/min, Drehmoment 1200 Nm, Druckluft 5 bar, Gesamtleistung 20 kVA, Gewicht ~5000 kg, Abmessungen 2250×2280×1700 mm. Druckluftanschluss vorhanden. Ermöglicht enge Toleranzen; Einsatz in Automotive, Uhrmacherei, Werkzeugmaschinen, Luftfahrt, Medizintechnik Technische Daten ohne Gewähr

HUAWIN WG 2000 ist eine CNC Gewindeschleifmaschine hoher Präzision, hoher Genauigkeit und zuverlässiger Ausführung. Kapazitäten: Spitzenweite 1000 mm; Gewindedurchmesser 10–200 mm; Werkstückgewicht max 80 kg; Gewindesteigung 1–99 mm; Druckwinkel 5–45°; größtes Modul 13; Verfahrwege X 260 mm, Z 800 mm, A ±45°, C 360°. Technische Daten: Schleifspindelmotor 16 kW, Drehmoment max 1300 Nm, Gesamtleistungsbedarf 20 kVA, Druckluftanschluss 5 bar; Maschinengewicht ~8000 kg; Abmessungen L2600×B2200×H2000 mm. Ausstattung: Druckluftanschluss. Erreicht enge Toleranzen; geeignet für Automotive, Uhrenindustrie, Werkzeugmaschinen, Luftfahrt und Medizintechnik Technische Daten ohne Gewähr

MONNIER + ZAHNER MZ 120 ist eine Schneckenfräsmaschine, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Leistungsdaten: Werkstückdurchmesser 2–40 mm, Modul max. 1,5 mm, Werkstücklänge max. 250 mm, Verzahnungslänge 150 mm, Fräserdurchmesser 16–32 mm. Technische Daten: Frässpindel drehzahl max. 8000 t/min, Werkstückspindel 770 t/min, Antrieb Frässpindel 1 kW, Fräskopfwinkel bis 45°. Ausstattung: Kühlmittelsprengeinrichtung, Lampe, Schaltschrank-Klimagerät. Erreicht enge Toleranzen; typische Einsatzfelder: Automotive, Uhrenindustrie, Werkzeugmaschinenbau, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

HUAWIN WG 2000 ist eine CNC Gewindeschleifmaschine, konzipiert für hohe Präzision, beste Genauigkeit und Zuverlässigkeit. Leistungsdaten: Spitzenweite 1000 mm; Gewindedurchmesser 10–200 mm; Werkstückgewicht max. 80 kg; Gewindesteigung 1–99 mm; Druckwinkel 5–45°; größtes Modul 13; Verfahrwege X 260 mm, Z 800 mm, A ±45°, C 360°. Technische Daten: Schleifspindelmotor 16 kW; maximales Drehmoment 1300 Nm; Gesamtleistungsbedarf 20 kVA; Anschluss Druckluft 5 bar; Maschinengewicht ca. 8000 kg; Abmessungen 2600×2200×2000 mm. Ausrüstung: Schleifspindelmotor und Druckluftanschluss. Erreicht enge Toleranzen; Einsatz in Automotive, Uhrmacherei, Werkzeugmaschinenbau, Luft- und Raumfahrt, Medizintechnik. Technische Daten ohne Gewähr

MONNIER + ZAHNER MZ 130 ist eine Schneckenfräsmaschine, konzipiert für hohe Präzision, große Genauigkeit und zuverlässigen Dauerbetrieb. Kapazitäten: Werkstückdurchmesser 2–55 mm; Modul max. 1.5/2.0 mm; Werkstücklänge max. 300 mm; Verzahnungslänge max. 230 mm; Fräserdurchmesser 16–40 / 53–100 mm; Fräserverschiebung 60 mm; Schwenkbereich Kopf +/-45°; Achsen X70 Y30 Z250 mm. Technische Daten: Frässpindel drehzahl max. 8000 t/min; Werkstückspindel 950 t/min; Spannzangenaufnahme 25 W; Anschluss 50 Hz 3x400 V; Maschinengewicht ca. 3500 kg; Abmessungen L2200 x B1800 x H1850 mm. Erreicht enge Toleranzen; geeignet für Automotive, Uhrenbau, Werkzeugmaschinen, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

PIBOMULTI TTEF ist eine Gewindewirbeleinrichtung, ausgelegt für Präzisionsbearbeitung, hohe Genauigkeit und Zuverlässigkeit. Arbeitskapazitäten: ausgestattet mit 5 Werkzeughaltern (5 pce) für Wirbelgewindeschneiden. Haupttechnische Daten: Drehzahlen bis 3200 t/min; Eigengewicht 15 kg. Ermöglicht enge Toleranzen; typische Anwendungsbereiche: Automobil, Uhrenindustrie, Werkzeugmaschinenbau, Luft- und Raumfahrt, Medizintechnik Technische Daten ohne Gewähr

PIBOMULTI TTEF ist eine Gewindewirbeleinrichtung, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Leistungsdaten: 5 Werkzeughalter; Drehzahlen bis 3200 t/min. Technische Spezifikation: Eigengewicht 15 kg. Ermöglicht enge Toleranzen und eignet sich für Automobilbranche, Uhrenindustrie, Werkzeugmaschinen, Luft- und Raumfahrt sowie Medizintechnik. Technische Daten ohne Gewähr

PIBOMULTI TTEF ist eine Gewindewirbeleinrichtung, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Wesentliche Arbeitskapazitäten: Anzahl Werkzeughalter 5 pce; Drehzahlen bis 3200 t/min; Eigengewicht 15 kg. Technische Hauptdaten: 5 Werkzeughalter, bis 3200 t/min und kompaktes Eigengewicht von 15 kg. Erreicht enge Toleranzen und eignet sich für Automotive, Uhrenindustrie, Werkzeugmaschinenbau, Luftfahrt und Medizintechnik Technische Daten ohne Gewähr

REISHAUER US ist eine Gewindeschleifmaschine hoher Präzision, entwickelt für hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Schleiflänge 450 mm; Einspannlänge 1055 mm; Ø Werkst. 250 mm; Gewindedurchm. 2–250 mm; Bohrung 45 mm; Gewicht zwischen Spitzen 200 kg; Steigung

max. workpiece diameter: . mm threading length: . mm max. module: 10 min. module: 1 diameter of hob: 150 mm milling width: 100 mm hob turning speeds: 45 - 560/900 U/min Various reconditioned milling heads and other accessories available for HECKERT ZFWVG 250 long-thread and gear hobbing machines. - Heavy-duty gear hobbing head ApFW (reconditioned) - Heavy-duty thread milling head ApGs (reconditioned) - Thread milling head ApG (reconditioned) - ApGi internal milling head (refurbished) - Various bushing sets - Lunettes - Counterholder with 3-jaw chuck - Various milling mandrels and much more, as shown in the pictures If you are interested in individual items or the entire package, please send me your price proposal. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We are pleased to offer for sale a complete high-precision manufacturing cell designed for the production of long, helical and screw-profile components, including PCP and mud motor rotors, extruder and injection molding screws, compressor and pump spindles. The equipment includes: 1. 2008 LEISTRITZ PW190.8000.HP Peeling / Whirling — Fully Operational Capacity: 120 mm (4.72”) diameter × 8,000 mm (315”) length Machine weight: 92,594 lbs (42,000 kg) 2. 2011 LEISTRITZ LWN300 Milling / Hobbing — Fully Operational 3. 2009 LEISTRITZ PW300PM Milling / Hobbing — Not in Service 4. 2014 WEINGÄRTNER FINISH 450 Finishing / Polishing — Fully Operational This equipment forms a comprehensive production route covering roughing, profile machining, semi-finishing and final surface finishing of long, high-precision helical and screw-profile components. Typical applic ...

Veneer splicing machine using hot-melt glue thread. Equipped with a metal worktable, feed rollers, thread guides, control panel and pneumatic pressure regulator with gauge. Visible dust accumulation, paint wear and surface corrosion. Operating condition not verified. Auction-ID: A1-50699-13

Case kit with riveter for threaded inserts complete with all accessories Overall dimensions: 400 x 400 x 300 mm Weight: 10 kg Auction-ID: A7-50798-343

Case kit with riveter for threaded inserts complete with all accessories, never used Overall dimensions: 400 x 400 x 300 mm Weight: 10 kg Auction-ID: A7-50799-443

Case kit with riveter for threaded inserts complete with all accessories, never used Overall dimensions: 400 x 400 x 300 mm Weight: 10 kg Auction-ID: A7-50798-205

Mixed lot of professional pipe-working and threading equipment, predominantly RIDGID, including a RIDGID 300 power drive/threading machine, multiple threading die heads, manual threading equipment, pipe supports/clamps and assorted installation accessories. Supplied with heavy steel storage crate. Main machine: Manufacturer: RIDGID / Ridge Tool Model: RIDGID 300 Type: stationary electric pipe threading power drive Heavy cast-metal construction Front pipe chuck/clamping assembly Rear centering/clamping mechanism Twin support bars Electric drive RIDGID foot-operated control pedal included Power lead and plug included Auction-ID: A1-51282-55

grinding length:150 mm total power requirement:3 x 380 /220 V weight of the machine ca.:2100 kg dimensions of the machine ca.:1200 x 1700 x 2000 mm grinding wheel diameter:280 - 350 mm grinding wheel width max.:20 mm workpiece diameter:65 - 120 mm workpiece turning speeds:1,5 -20 U/min Documents:vorhanden

manual roll gap adjustment 2x7.5 kW motor Bearing Oil circulation lubrication adjustable roller speed 10-41 rpm BJ 1990

ENTRY STRIP THICKNESS: MAX. 12 MM, EXIT THICKNESS: 1.8 MM, STRIP WIDTH: 1000 - 1500 MM, AGC SYSTEM (2000), COMPLETE LINE!

1 x NEW 'Bainite' (India) Make 1000mm (42in) wide x 400mm (16in) dia two roll mill, Hydraulic nip adjustment (dual acting cylinders), Peripherally drilled chilled cast iron rolls (Hardness 65/72 Shore), with anti friction roller bearings, Friction ratio 1:1.08, Hinged guide plates, Lubrication system comprising pneumatic intensifier with grease reservoir, Electro pneumatic brake with power fail safe mechanism. Safety bars fitted to front and rear. Compact right angle drive with 45kW Siemens AC variable speed squirrel cage motor through heavy duty helical design direct drive reduction gearbox (SF 2), Back roll speed 18rpm/front roll 16.6rpm. All mounted on a compact design fabricated steel bedplate. Stainless steel tray underneath. Including electrical controls comprising Siemens G130 VFD drive and S7-1200 plc with HMI. CE marked, with full Technical file, Documentation and S ...

REVAMPED: 1990, WIDTH: 700-1400 MM, THICKNESS: 100 MICRONS - EXIT: 2 x 5 MICRONS 1500 M/MIN.,

Material: mild steel Reel in stainless steel;

Qty. 1 Second-hand 3 stands 4-Hi Tandem cold rolling mill line Mfc.: Demag Type: 4-Hi Built: 1968 Material to be rolled: low carbon steel Strip width: 600 †1500 mm Thickness Entry: 2.5 mm Exit: 0.2 mm Entry: Coil ID: 510 mm OD: 1800 mm Weight: 15 MT Exit: Coil ID: 510 mm OD: 1800 mm Weight: 15 MT Work roll: dia. 380 mm x 1650 mm Roller bearings Back-up rolls: dia. 1150 mm x 1650 mm Oil film bearings Housing: Closed top, cast steel construction Housing post: 762 x 552 mm Rolling speed: 240 m/min.

Qty. 1 Second-hand cold rolling mill Mfc.: SUNDWIG/MINO Type: 4-HI Built: 1980 Revamped: 2016 Rolled material: Carbon steel SAE1006, S235-S550, C45-C75, IF Strip width max.: 600 mm Thickness: in 6.0 mm out 0.25 – 5.0 mm Speed max.: 500 m/min Coil size: ID 508 mm OD 2000 mm Back-up roll dia.: 590 mm - 625 mm Work roll dia.: 190 mm - 240 mm Motors stands: DC, EAA converters (installed 2004), Rolling force: 500 Tons Coolant Emulsion Filtration by magnetic system Controls PLC system: SIEMENS Scada: Simplicity Thickness control: Entry stand hydraulic equipped with Automatic Gap Control (AGC) Thickness control: Exit stand Utilities: Electrical voltage: 380 V, 3 Phase, 50 Hz Air pressure: 5 Bar Cooling water No. of work rolls: 120 used + 8 brand new No. of back-up rolls: 8 Electric Drawings Mechanical Drawings Certification: Allegato V/8 ...

REHEAT FURNACE Type: Walking Beam Incoming Billet: 160 x 160 mm x 8.300 – 12.000 mm Charge: Hot and Cold Discharging Temperature: 1150 Degr. Nominal Production 90 Ton/Hr Fuel: Natural Gas (LNG) Furnace inside dimensions: L x W 12.500 x 12.800 mm REBAR ROLLING MILL: Type: Housingless Stands Roughing Mill: 6 Stands Intermediate Mill: 6 Stands Finishing Mill: 6 Stands Horiz. Stands # 1,3,5,7,9,11,13,15,17 Vert. Stands # 2,4,6,8,10,12,14 Horiz./Vert Stands #16 and 18 CROP SHEAR No. 1 Head & Tail Cropping, Emergency Chopping Type: Crank Shear- Blade width 200 mm CROP SHEAR No. 2 Head & Tail Cropping, Emergency Chopping No. of Blades: 4- Blade width 180 mm DIVIDING SHEAR Cutting to multiple lengths COLD SHEAR Cutting to final length Shear type; CMC 0630 0950 No. of Blades: 2- Blade width 900 mm Product Length: 6-12 Meter (Standard)  ...

Reed 42" x 16" Two Roll Mill. 40HP Motor, with clutch brake. Friction ratio 1.1 Manual Nips. On one-piece steel bedplate.

Qty. 1 Second-hand foil rolling mill plant Mfc.: World Co. (Japan) Type: 6-Hi – Non reversing mill Built: 2002 Application: Copper foil Width: 400 – 700 mm Coil weight: Max. 5 Ton Thickness Entry: 100 – 200 microns Exit: 5 – 100 microns Speed: 0-400/800 m/min. Thickness X-Ray unit AGC system Variable Crown Control Hydraulic servo equipment Main motor power: 200 kW DC Slitter line Mfc.: IHI Width: 150-700 mm Thickness 5 – 50 microns Degreasing line Mfc.: World Co. Strip width: 700 mm Thickness: 10-50 µm Treatment line Mfc.: Kawasaki Built: 2005 Width: 700 mm Thickness: 10-50 µm

Qty. 1 Second-hand aluminium foil rolling mill plant Mfc.: Robertson, Kampf, Schmutz, Nishimura, Waldrich-Siegen, Otto-Junker Built: 1962 – 1989 Foil width: 850 mm Entry thickness: 0.4 mm Exit: 2 x 7 microns Scope of supply: Roughing Foil rolling mill: 4-Hi Intermediate foil mill 4-Hi Finishing foil mill 4-Hi Slitters – Qty. 4 Roll grinders – Qty. 2 Annealing furnaces – Qty. 4 Charging car INDIVIDUAL ITEMS CAN BE SOLD

Qty. 1 Second-hand section rolling mill plant Mfc.: Pomini, OMV, BM, Bendotti Built: 1989 continuously modernised Stopped: 2019 Installed power: 16.2 MW Billet income sizes: 120 x 120 up to 160 x 160 mm Length: 6.0 m Section production: Round bar dia.: 30 – 60 mm Angles from 30x3 up to 100x12 mm U” channel from 40x20 and 120x55 mm T” shape from 30 till 100 mm T” shape from 30 to 120 mm (Special for elevator rails- Leader in Europa) The rolling mill can be implemented with many other profiles by using different grooved rolls. Production capacity: 250,000 – 270,000 T/annum depending on the production mix Scope of supply: Reheating furnace Section rolling mill line Tying Machine Descaler Bundle Machine Cooling tower Machine shop

Qty. 1 Second-hand section rolling mill plant Mfc.: Pomini, OMV, BM, Bendotti Built: 1989 continuously modernised Stopped: 2019 Installed power: 16.2 MW Billet income sizes: 120 x 120 up to 160 x 160 mm Length: 6.0 m Section production: Round bar dia.: 30 – 60 mm Angles from 30x3 up to 100x12 mm U” channel from 40x20 and 120x55 mm T” shape from 30 till 100 mm T” shape from 30 to 120 mm (Special for elevator rails- Leader in Europa) The rolling mill can be implemented with many other profiles by using different grooved rolls. Production capacity: 250,000 – 270,000 T/annum depending on the production mix Scope of supply: Reheating furnace Section rolling mill line Tying Machine Descaler Bundle Machine Cooling tower Machine shop

Fine rolling mill with 800 mm roll width and 800 mm roll diameter, incl. main drives and auxiliary drives, split adjustment manually. In regularly maintained condition, rollers without riefen. Available for an extra charge: Matching dust filter from Hellmich.

Qty. 1 Second-hand roughing, finishing mills and special equipment Mfc.: DAVY, TMEIC, TOSHIBA, MITSUBISHI Type: 4-Hi Rev. Built: 1997 Revamped & Installed: 2008, 2011 Stopped in 7-2017 Revamped cost of USD 151.0 Mill. from 2008 up to 2011 Finishing mill equipped with CVC Roll plus Technology System Finishing mill – new hydraulic adjustment to increase rolling force to 90 MN Roughing & Finishing mills: Technology Control System (Level 1) Process Models (Level 2) for pass schedule calculation, profile & flatness control (PFC), Pacing system & Material tracking Revamped by SMS in 2011: Roughing mill: Slipper-type Spindles Product capacity: 2,000,000 ton/year Mill capacity: 30 Plates/h Entry Material: Slab T130~300 mm x W1,200~2,200 mm x L2,350~4,000 mm Final Product: Plate T5~180 mm x W1,200~4,100 mm x L max. 25 m Application: Ship building plate & Pipe pro ...

Qty 1 x Shaw 60in x 22in two roll mill, Manual nip adjustment, Peripherally drilled rolls (front and back), Hinged guide plates, Sleeve bearings with motorised lubrication, Right angle drive gearbox with 115Kw DC variable speed motor, All mounted on a heavy duty bedplate. Carter stockblender mounted on too. Complete with controls etc and in very good condition.

1 x Heavy duty 2 roll mill Roll dimensions: 2100mm x 665mm dia. Hydraulic nip adjustment, Safety push bars, Peripherally drilled rolls, Sleeve bearings with grease lubrication, Right angle drive gearbox, with Siemens 240kW DC variable speed motor, Strip knives fitted to front roll, Heavy duty fabricated bedplate, Carter stockblender mounted on top.

About 60 pieces. Timken tapered roller bearings

5 Qty. 1 Continuous 6 Stand Cold Rolling Mill Mfc.: Fröhling Built: 1984 Type: 4-Hi Strip width: 220 mm Thickness: 0.15 – 2 mm 8 Qty. 1 Strip welding machine (Cold mill) Mfc.: A.I. Welders Built: 1986 Rev. in 2002 Speed: 75 – 600 m/min. Width: 233 mm Thickness: 0.175 – 2.0 mm 9 Qty. 1 Induction Treatment Furnace (Cold mill) Mfc.: Otto Junker Built: 1986 Width: 220 mm Thickness: 0.175-2.0 mm Speed: 8-60 m/min. Temp.: 550 °C 10 Qty.1 Quenching unit (Cold mill) Mfc.: Otto Jumker Built: 1986 Flow: 95 m³/h Temperature: 29 °C Size: 1.2 x 1.2 x 2.8 m 11 Qty. 1 Rotary shear (Cold mill) Mfc.: HDE Built: 1996 Strip width: 220 mm Thickness: 0.1 – 0.95 mm

Qty. 1 Second-hand aluminium foil rolling mill plant Mfc.: Sambhav Built: 1993 - 2012 Revamped: 2015 Foil width: 1000 mm Entry thickness: 8 mm Exit: 8 microns Consist of: Melting furnace 22 MT Holding furnace 15 MT Strip caster Roughing rolling mill Intermediate foil mill Finishing foil mill Heavy slitter Strip slitter Foil separator Qty. 2 Foil slitters Annealing furnace

Qty 1 x Schwabenthan 200mm dia x 450mm wide two roll mill, Manual nip adjustment, Digital nip gap readout, Electrically heated rolls, Jahnel gearbox with 10HP motor to each roll (variable speed), Variable friction ratio/roll speeds, Stainless steel interlocked guards and tray. Complete with electrical controls and in good condition. O/a dimensions 2700 x 1500mm

Qty 1 x Schwabenthan 150mm dia x 350mm wide two roll mill, Manual nip adjustment, Digital nip gap readout, Electrically heated rolls, Even/friction selectable gear ratios, Motor mounted under frame. Complete with electrical controls and in good condition. O/a dimensions 2400 x 850mm.

Rieter Fine Rolling Mill - GSA 1,000800

Qty. 1 Second-hand cold rolling mill Mfc.: MCC, ABB, IMS Type: 6-Hi Cold Rolling Mill Built: 2009 Stopped: 2017 Annual capacity: 220,000 Ton/Year Annual running time (Hour): 6480 Strip Width: 800~1250 mm Thickness Entry: 1.5~3.5 mm Exit: 0.2 – 1.2 mm De-Coiler OD: 1000~2000 mm De-Coil ID: 610 mm De-Coil Weight: Max. 25 T Coil OD: 1000~2000 mm Coil ID: 610 mm Coil Weight: Max. 25 T Mill Max Speed: 1300 m/min Threading Speed: 30 m/min Main Drive Controller (3300 VAC) Mfc.: ABB ACS6000 Variable Speed Variable Voltage Xray Gauge Mfc.: IMS Germany Automation Siemens PLC/Wincc