thread milling used for sale

Fliss bohrer and thread rolling NC machine. Machine was rebuilded in 2019, complete Hardwere, and pneumatic components, and part from electric. Machine can be used for serial tube production, can be aded Robot for manipulating. Machine will be able to connect with a handling robot for fast delivery and high productiion.

- workpiece diameter d680 - max workpiece length 3400 mm - max working lengths 2600 mm - with discs (d1100 mm) - required electric capacity 60 kW/h - under power, in use

We offer a Milling Machine Routing Star V that is an ideal choice for automotive component machining and other high-precision tasks. We have four machines available from different years ( 2012, 2014, 2017) Technical Data: Dimensions (L x W x H): 5600mm x 2990mm x 2950mm Weight: 8000 kg Power Rating: 12 kW Connection Power: 3 x 400 V, 50 Hz Hydraulic Working Pressure: Max (bar not specified) Pneumatic Working Pressure: Not specified Table Size: 1400mm x 700mm Table Type: Rotating Table Number of Robots: 2 Tool Changer: Yes Find more here - / Contact us at -

Exchange units for contour milling HOMAG

quill dia 110 mm quill stroke 100 mm ISO 40 (DIN 2079) 360° swiveling of the spindle head previously used on Hermle UWF 1000

Key data: 500 mm, 200 mm

Drilling / Milling machine OPTIMUM type OPTI F 40 E Travel X: 500 mm Travel Y: 200 mm Spindle: Ø 80 mm Cone CM3 Spindle exit: 120 mm Spindle speed: from 95 to 3200 RPM Table size: Length 730 mm x Width 210 mm 2 speeds motor Motor power: 1,5 Kw Straight head Cross table Manual Descent Equipped with: 1 rotary vice Voltage: 380 V Dimensions (L x W x H): 1200 x 900 x 1400 mm Weight: approx 350 KG

Manufacturer: RASOMA Type of Machine : End Milling Machine Year of Manufacture: 2018 Total Weight: 16,000 kg Voltage: 3x400V, 50Hz Control Voltage: 24V DC, 230V AC Rated Current: 92 A Maximum Fuse: 125 A Power Rating: 62 kW Find more here - / Contact us at -

Fanuc 6-assig robotfreescentrum voor aluminium en staal Fanuc R-2000-B/165F CNC: R-30iA CONTROLLER X-beweging van de robot op de rails: 10.500 mm Uitgeschoven robotarmbereik (links en rechts): 3045 mm gt; Maximale werkstuklengte indien het een profiel betreft: 15 meter gt; Maximale werkstukafmetingen zonder uitgeschoven arm: 10.500 x 3045 mm gt; maximale werkstukhoogte: 3500 mm gt; Maximaal gewicht dat aan de robot kan worden bevestigd: 165 kg Gewicht van alleen de robot: 1200 kg Gereedschapswisselaar gemonteerd op rails met 13 gereedschapsposities: - 12 live tools - 1 meetsonde Freeskop: TMA6 17/2 Snelheid: 1 gt; 12.000 tpm ISO 40 - 11 kW Gewicht: 45 kg Technische kenmerken: • Automatische gereedschapswisseling (ATC). • Geïntegreerde thermische beveiligingssensor (motoruitschakeling bij 90 °C). • Pneumatisch gereedschapsklemsysteem (enkelwerkende cilinder met veerretour): – Ci ...

MAKE CHIRON MODEL MILL 800 5 axis 5 axis machininng center (milling/turning from bar) Under power in our warehouse in Gussago BS Italy Mimu Machine tools CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs 90fjsieew Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindl ...

We have for sale milling and borig heads for Skoda HBM IV25, IR100, IFW1, IFW2, IFW3, IFH, IOT steady rest for W200 price from 1000-5000eur

MAKE CHIRON MODEL MILL 800 5 axis 5 axis machininng center (milling/turning from bar) Under power in our warehouse in Gussago BS Italy Mimu Machine tools CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs 90fjsieew Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindl ...

Double head lathe for milling and turning tubes Automatic (un)loading of workpieces nbsp;

- Z Axis 1100 mm - X Axis 1310 mm - C Axsi Endles - Working range stage 1: 4000 - 8500 mm - Working range stage 2: 4000 - 11.500 mm

Freesrobot Staubli RX170HM Deze robot is voorzien van gaten om te frezen in mallen van banden, maar ook in andere zaken is dit mogelijk. Koeling door de spindel en de koelmelk is luchtgekoeld. Smering Gebeurde met vet. spindelopname: HSK E 32 Werd gebruikt in Tire Mold fabriek Mecamold Herstal. Max weight on the table: 300 kg Admission in spindle (ISO): HSK E 32 Power on the spindle: 8 kW Drilling-capacity: 80 mm Tapping-capacity: 80 mm Control : Fanuc Number of axes: 6 Toolchanger: nee Number of toolholders: nee Number of rotations: 500 - 20 000 rpm Power principal motor : 5 kW

General SKU364X867 LocationBarneveld CEcheck MakeHosokawa Alpine Main Features Motor18.5 KW Inlet diameter150 mm Width165 mm Specified Features - Hammer Mill Hammer millcheck Grinding room sizeø 300 mm Moving hammers24 Hammer width12 pieces 40 mm and 12 pieces 60 mm With sieve cagecheck Housing dimensions ø 300 mm Inletø 150 mm Motor18,5 kW (400 V, 2955 rpm) Speed6900 rpm Hammer Mills MaterialStainless steel Information TypeMP2-W No.P1 187094 /4050 Year of construction2013 Mounted on framecheck Floor space2,50 x 0,95 m Total height0,80 m Weight550 kg Extra SpecificationsWith: dust filter AZO blower: density 1.17 kg/m³: 45 m³/min: speed: 3000 rpm hopper with gear motor: 0.2 kW, 2730 rpm Hammer MillsNew arrivalsHosokawa AlpineMills > Hammer MillsNew arrivalsBrand > Hosokawa Alpine What you can expect from Foeth: -- Machine is in working condition -- At ...

General SKU364X863 LocationBarneveld CEcheck MakeHosokawa Alpine Main Features Motor37 KW Inlet diameter150 mm Specified Features - Fine Impact Mill MaterialStainless steel 1.4541 (321) Fine Impact Mills Grindercheck With sieve cagecheck Housing dimensions ø 1000 mm With hoppercheck (for a milled product) Inletø 150 mm Motor37 kW (400 V, 2960 rpm) With variable speed drivecheck Speed820—4100 rpm Information Type500 UPZ No.P1 187094 Year of construction2011 Mounted on framecheck With switchcheck (as is) With control cabinetcheck (as is) Floor space1,35 x 0,95 m Total height1,0 m Weight960 kg Extra SpecificationsWith: dust filter blower: density 1.17 kg/m³: 45 m³/min: speed: 3000 rpm hopper with gear motor: 0.2 kW, 2730 rpm For the UPZ 500 we have the following additional items on stock AZO Coolable screw conveyor — SKU: 364X866 DMN Machinefabriek ...

COMPLETE LOT SPECIFICATIONS - 2x Fanuc R2000iB 165F industrial robots with RJ3iC controllers - 2x Gudel 8 metre linear tracks with bellows fully integrated - 2x HSD 8kW automatic tool change spindles, Year 2022.Inverters, cables, and full integration included Find more here - / Contact us at -

General SKU357X1335 LocationBarneveld CEcheck MakeNetzsch-Condux Main Features Motor3.7 KW Inlet diameter180 mm Specified Features - Jet Mill Motor1,5 kW (380 volt, 12.000 rpm) With variable speed drivecheck Information TypeCGS 16/V-DA DSF / CFS 8/HD S No.7043 Year of construction1998 Mounted on framecheck With switchgearcheck (as is) Floor space4 x 1,4 m Total height4,5 m Weight3300 kg Extra SpecificationsTechnical specs (CGS 16/V-DA DSF — :opposed jet mill): Throughput: ca. 10 kg/h Classifier wheel outer diameter: 120 mm Dip tube diameter: 45 mm Max classifier speed: 12,000 min⁻¹ Max gas temperature: 60 °C Drive power: 1.5 kW Drive speed range: 3,000–12,000 min⁻¹ Inlet diameter: Dip tube diameter 45 mm Technical specs (CFS 8/HD-S — :fine classifier): Min speed: 600 min⁻¹ Max speed: 12,000 min⁻¹ Max operating temperature (T_max): 60  ...

Thread gaugering set, 4 pcs. Thread good gauges, left-hand thread PAGUS M 6 - M 12 M 6: Ø 32 x 7 mm M 8: Ø 30 x 8 mm M 10: Ø 32 x 10 mm M 12: Ø 38 x 13 mm used, Tested ! Dimensions(set): 40 x 40 x 40 mm

workpiece diameter: 50 mm threading length: 100 mm thread pitch: mm total power requirement: 1 kW weight of the machine ca.: 1500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Five older thread milling machines Mikron are available, 2x Hydraulic Thread Milling Machine Mikron 132.02, 1x Mikron 132-01, 1x Mikron 104-01 and 1x Short Thread Milling Machine Mikron 106.01, an on-site inspection is possible.

General Manufacturer: Monnier & Zahner Type: M651 Year of Make: 2007 Control: Fanuc Series 21i MB Travels: X 80 mm, Z 250 mm, A swivel axis +/-45°, W 250 mm Other axes: C-axis workpiece spindle, V-axis loader Working spindle Speed: 3,000 rpm Dimensions and weight Dimensions: 2,400 mm x 1,410 mm x 2,250 mm Weight: approx. 2,400 kg Condition Condition: Used Functional: Tested and fully functional

End mill, milling cutter, shank thread milling cutter, thread cutter -Manufacturer: JAL PWS P, 29 pieces shank thread milling cutters -Hole: Ø 27 mm 25 pieces, Ø 32 mm 4 pieces -Various types: see photos -Sizes: see photo parts list -Price/Sale: complete -Dimensions: 240/180/H150 mm -Total weight: 4.2 kg

End Mill, Milling Cutter, Shank Thread Mill, Thread Cutter, Threading Tool, Indexable Thread Mill -Manufacturer: Ingersoll, indexable insert thread milling cutter M40 x 4.5 unused original packaging -Type: SR 0040 L30-2 -Art. No.: 3026150 12Y1SO40070W6R00 -Intake: Ø 32 mm -Dimensions: Ø40 x 130 mm -Weight: 0.7 kg

Brands E.W. Menn / Ingramatic / P&E / Hilgeland Diameter ranges from 1 mm - 20 mm

Makes: Hilgeland / EW Menn / Ingramatic Diameter ranges 1mm - 20mm

Thread cutting power M 2 - M8 Speed: 700 rpm, luf requirement: 750 l/min, pressure 6 - 7 bar, working range extension: 300 - 1900 mm, Afbau parallel arm: stable arm structure made of hard aluminium profile (38x29) Weight: 23 kg, adapter holder: TCS 1 B - incl. 6 safety slip couplings according to your choice year: 2009

We can offer several thread rolling machines with cylindrical dies, any size.

Thread cutting capacity: M 3 - M 12 Speed: 400 rpm Air demand: 750 l/min Pressure: 6 - 7 bar Extension: 950 mm Standard accessories: Parallel arm Air motor 6 pcs safety slip couplings of your choice guide column with mounting flange Radial boom Maintenance Pneumatic oil for initial filling

Various threaded rollers

Threaded drilling machine with up to 10 spindles, adjustable drilling pattern

Semi-automatic short-threaded cutting machine for the production of external and internal thread Gr. via cross slide: 160 mm Gr. via cross slide guide: 240 mm tip wiete 250 mm nSpindle=180-2240 rpm spindle bore: 61 mm gr. threaded length/deep 100/6 mm

Assembly angle on both sides with threaded plates brand: Otto Kraft height 835mm ; Width 550 mm ; Length 450 mm plate size 750 mm x 500 mm All details without gewaehr

Machine is used for the processing of pipe and pipe components, including thread cutting in terms of the single and mass production. Diameter range of processable pipes: 70-290 mm Max diameter of processable work-piece: -Over stand: 800 mm -Over support: 450 mm Diameter of spindle hole: 300 mm Max turning length: -With bevel ruler: 800 mm -W/O bevel ruler: 420 mm Amount of spindle speeds: 12 Limits of spindle rotation frequency: 8-355 turn/min Amount of longitudinal and cross support servings: 32 Limits of: -Longitudinal servings: 0,064-1,025 mm/turn -Cross servings: 0,034-0,458 mm/turn Step limits of cuttable: -Metric threads: 1-12 mm -Inch threads (amount of threads for 1): 2-24 Max turn angle of bevel ruler: +- 10 degrees Overall machine dimensions: -Length: 3600 mm -Width: 1860 mm -Height: 1525 mm Machine weight with electric equipment: 9050 kg

STANKOIMPORT 5822M thread grinding machine was manufactured in the USSR. The machine is used for the process of grinding threads to give them the correct dimensions and roughness. During this process, a grinding wheel with a diameter of 400 mm is used to remove a small allowance from the workpiece, forming the thread shape on it. The grinding machine processes threads with a maximum diameter of 200 mm, a length of 500 mm and a weight of up to 30 kg. Depending on the choiceed disc, the diameter of the workpiece can be from 3 to 150 mm (grinding with a single-coil disc) or from 10 to 120 mm (grinding with a multi-coil disc). The total weight of the grinding machine is approximately 5 tons. Technical data of the STANKOIMPORT 5822M thread grinding machine - maximum workpiece diameter: 200 mm - diameter of the workpiece grinded with single-coil disc: 3-150 mm - diameter of the workpi ...

Thread edge with extensive accessories, by hand or automatically to use. Table model, mobile also for the construction site Manufacturer GF Georg Fischer Table model with electric drive or by hand. Automatically opening thread cutting head Threaded jaws for: 1/2 inch, 3/4 inch, 3/8 inch, 1 inch, 1 1/2 inch, 2 inch Machine in transport box (steel) Rems Tornado Klauke Rothenberger Supertronic Special price

Huller thread cutting machine vith hydraulic vice. Thread head from M3 up to M27 Machine is perfect for serial work.

CNC Thread rolling and gear burnishing machine ESCOFIER P440 CN CNC Siemens New 2004 - like new 2-roll 2 moving heads 4000 daN rolling pressure workpiece diameter: 100mm max. tool diameter: 180-245mm Swiveling: +/-6°, forward speed: 0.1-20mm/s, reverse speed: 0.1-30mm/s motor power: 8.6kW New: 2004 Condition: like new

Offer via gebr. Thread cutting machine with pipe saw RA21 Made GEORG FISCHER type KM2, built 1997 Technical data: Thread diameter 3/8" - 2" Power connection 200 - 240 V / 50 Hz With mobile undercarriage with threaded cutting jaws 3/8", 1/2", 3/4", 1", 11/4", 11/2",2" used, in good condition.

thread dia.: 12 mm threading length: 20 mm turning speeds: 400 U/min working area: 500 - 1600 mm weight of the machine ca.: 25 Kg dimensions of the machine ca.: m • pneumatical thread cutting device, M3 - M12, • with 6 adapters of thread cuttings, Size 1, • control valve with lubrication, • order no. 31681, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Thread cutting head with chaser jaws, thread cutting stock, thread cutting machine, pipe thread cutter, cutting head -Threading head: pipe thread -Measurements: see pictures -Price: per piece -Number: 4 pieces -Dimensions: 340/250/H60 mm -Weight: 6 kg/piece

Micrometer, micrometer screw -Measuring range: 75 - 100 mm -Handover: as is as seen -Accessories: missing, see photo -other sizes: available -Dimensions box: 265/145/H30 mm -Total weight: 0.7 kg

Micrometer, micrometer screw -Measuring range: 75 - 100 mm -Accessories: see photo -other sizes: available -Dimensions box: 265/125/H25 mm -Total weight: 0.8 kg

Tapping machine, pipe thread cutter -for: pipe size max. 2 inches -Speed: 72 rpm -Foot switch with: emergency stop function -Pipe cutter -Interior deburrer -Operating voltage: 220 volts -Dimensions: 1100/560/H1140 mm -Weight: 126 kg

Tapping machine, pipe thread cutter -without tools -Operating voltage: 220 volts -Dimensions: 830/530/H1080 mm -Weight: 64 kg

Thread cutting head with chaser jaws, thread cutting stock,Tapping machine, pipe thread cutter, cutting head -Thread cutting head: 1/2- 2 -Cutting jaws: R1 -1 1/2 -Dimensions: 870/110/H200 mm -Weight: 11 kg