thermoforming machines used for sale

TIPPER TIE TECHNOPACK TCNV-200 BT pneumatically operated single-clipper

DYNAJET 500th HELI with approx. 4,250 operating hours, price 22.000€ (net) The mobile and universally applicable dynaJET 500th cold and hot water high-pressure cleaner with up to 500 bar working pressure is characterized not only by its user-friendliness but also by its low weight, compact dimensions and high performance and safety level. CONSTRUCTION • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Self-supporting and indestructible framework for weight optimization • Crane eyelet for easy transport and handling • Underrun protection for additional safety • Frame in dip painting technology for high corrosion protection and highest surface quality • Targa concept with separation between the unit side and the operating side for enormous advantages in ergonomics, overall machine safety and noise reduction • Impact-resistant plastic hood for mi ...

DYNAJET 500th HELI with approx. 800 operating hours, price 38.000€ (net) The mobile and universally applicable dynaJET 500th cold and hot water high-pressure cleaner with up to 500 bar working pressure is characterized not only by its user-friendliness but also by its low weight, compact dimensions and high performance and safety level. CONSTRUCTION • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Self-supporting and indestructible framework for weight optimization • Crane eyelet for easy transport and handling • Underrun protection for additional safety • Frame in dip painting technology for high corrosion protection and highest surface quality • Targa concept with separation between the unit side and the operating side for enormous advantages in ergonomics, overall machine safety and noise reduction • Impact-resistant plastic hood for mini ...

OSTAS RING BENDING MACHINE TYPE OPK-32 -Shaft diameter 30 mm -Hardened special steel shafts -1 set of hardened rolls -Bottom rollers are driven -Foot pedal -Horizontal and vertical work -Manual -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Laminating rollers Billhöfer Model 102 & 104 series and maybe others Year 2005 Qty available 1 set Available Direct

DYNAJET 500th HELI with approx. 1,450 operating hours, price 33.000€ (net) The mobile and universally applicable dynaJET 500th cold and hot water high-pressure cleaner with up to 500 bar working pressure is characterized not only by its user-friendliness but also by its low weight, compact dimensions and high performance and safety level. CONSTRUCTION • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Self-supporting and indestructible framework for weight optimization • Crane eyelet for easy transport and handling • Underrun protection for additional safety • Frame in dip painting technology for high corrosion protection and highest surface quality • Targa concept with separation between the unit side and the operating side for enormous advantages in ergonomics, overall machine safety and noise reduction • Impact-resistant plastic hood for mi ...

Bending capacity: Copper or brass tube: 54 x 4 mm Steel tube: 54 x 2 mm Stainless steel pipe AISI 304/316: 42 x 3 mm Hydraulic tube ST35: 54 x 4 mm Furniture construction tube: 54 x 3 mm Aluminium tube: 54 x 5 mm Gas pipe for piping: 1 1/2 " Maximum bending angle: 210° Engine power: 1,1 kW Voltage: 400 V Machine dimensions (W x D x H) without stand: 800 x 300 x 680 mm Approximate weight: 107 kg Scope of delivery: Bending segment 1/4 "G (Ø 13.72 mm) incl. counter rollers and race Bending segment 1/2 "G (Ø 21.3 mm) incl. counter rollers and race Bending segment 1 "G (Ø 33,7 mm) incl. counter rollers and race Bending segment 1 1/4 "G (Ø 42.25 mm) incl. counter rollers and race

Pump vacuum cleaner with integrated submersible pump that continuously pumps absorbed liquids out of the container, RCDs in the mains connection cable, special filter bags, application-oriented accessories. The pump can be completely removed and the container closed, so this industrial vacuum cleaner can also be used as a normal wet-dry vacuum cleaner. Areas of application: Suction/suction of large quantities of liquid, use in floods, use in flat roof renovation, cleaning of garden ponds and pool facilities. SCOPE OF DELIVERY Including accessory set pump vacuum cleaner. Additional filter 1 x FSS 1200 (foam) Filter bag 1 x FSN 80 1 x Suction hose Ø 35 mm x 5 m 1 x Drain hose Ø 33 mm x 5 m 1 x Handle tube plastic with secondary air slider 2 x Suction pipe plastic (each 50 cm) 1 x Aluminium professional floor nozzle 45 with rubber and briste strips EQUIPMENT Main filter FPP ...

Sales are made on behalf of the customer. Professional high-pressure cleaner DYNAJET 500th HELI Blue Performance The No. 1 in efficiency, power and performance. Professionals from all industries worldwide rely on dynaJET's highly efficient high-pressure water cleaners. These high-pressure units impress with their universal application possibilities, extreme cost-effectiveness, absolute reliability, long product life and uncompromising quality. Standard safety equipment offers you and your employees the highest level of safety. The latest generation of DYNAJET high-pressure units offers reduced fuel consumption, lower emissions and improved ease of use. Get efficiency, or even the opportunity to conquer new business areas, in your company. All DYNAJET high-pressure cleaners are comprehensively tested by our quality management before they are delivered. Our product and accessor ...

Procedures x way 500 mm y way 320 mm z-way 420 mm table 350 x 900 mm Speed 50-3400 RPM. Recording ISO 40

OSTAS SWAGING MACHINE TYPE KMRH 4.0 -Capaciteit 4 mm -Rol hydraulic verstelling -Voetbediening -Remmotor -Roll met 4 sets -Noodstop -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Sales are made on behalf of the customer. Professional high-pressure cleaner DYNAJET 350th HELI The No. 1 in efficiency, power and performance. Professionals from all industries worldwide rely on dynaJET's highly efficient high-pressure water cleaners. These high-pressure units impress with their universal application possibilities, extreme cost-effectiveness, absolute reliability, long product life and uncompromising quality. Standard safety equipment offers you and your employees the highest level of safety. The latest generation of DYNAJET high-pressure units offers reduced fuel consumption, lower emissions and improved ease of use. Get efficiency, or even the opportunity to conquer new business areas, in your company. All DYNAJET high-pressure cleaners are comprehensively tested by our quality management before they are delivered. Our product and accessory portfolio ensu ...

Discus Werke DSH 600/1000 Side Surface Grinding Machine This type of machine is a machine with a motor-driven grinding spindle. The clamping and grinding of the workpieces is carried out with clamping devices tailored to the respective work. The devices are attached to the machine bed. The column saddle on which the motor spindle is mounted serves as a feed, dressing and pendulum slide. Manufacturer: Diskus Werke Model: DSH 600/1000 Serial number: 6299 Type: Side Surface Grinding Machine Cooling lubricant: Isocool 1020 BF Coolant volume: 400 liters Concentration: 2.5% (x factor 1.6 ≙ 4%) Year of construction: 1964 Condition: used The side surface grinding machine is located in Hildesheim and can be dismantled and picked up by the customer there. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure,  ...

OSTAS ROUND BENDING MACHINE Type SB 1070 x 95 -Capaciteit 1070 x 3 mm -Walsen Conisch -Bovenrol Wegdraaibare -Documentatie PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Accessories: -Fixed and revolving bezel -Rapid steel holder type B Turning diameter: 225 mm top width 1000 mm Spindle bore 42 mm Spindle speeds 35 1500 rpm.

Bread slicer - Make: RÖSEN & ROBBEST - Model: SPA 38 (38 bread liner) - Condition: Used, fully restored - Warranty: 6 months

Dough knitting machine - Make: SCHNÖDER - Model: FORTUNA Automat Gr. 3 - With new working plate - Condition: Used, restored - Warranty: 6 months

Resonance screening machine, Screening machine, Vibrating screen, Linear screening machine used Manufacturer: Binder + Co AG TYPE: SL1000GX.6.7 Year of construction: 1999 Sieve: 2 levels each approx. 4.2 x 0.9 m Upper level: Longitudinal grid with approx. 13 mm distance Lower level: plastic screen with approx. 9 x 9 mm mesh size Insertion height approx. 1.5 m Dimensions without drive approx. 6800 x 1700 x 1800 mm Resonance screens are used in the dry and wet screening of round and edge grain as well as leafy materials. They work according to the throwing principle. This machine was used in a glass recycling plant. Changes and errors in the technical data, information and prices as well as prior sale reserved.

OSTAS ROUND BENDING MACHINE TYPE SBM 1070 x 95 -Capaciteit 1070 x 3 mm -Walsen Conisch -Bovenrol Wegdraaibare -Voetbediening -Noodstop -Documentatie -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Screen surface: 1000 x 3000 mm, semi mobile steel structure with discharge chutes

Capacity round maximum diameter: 0 mm Angle degrees maximum: 0 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm Technical data Cut range: round up to: 400 mm Square: 400 x 400 mm Execution: Horizontal hydraulic Cut length: min.: 6 mm max: 750 mm Max. automatic forward feed length: 750 mm Cutting speed: stepless from: 20 m/min up to: 110 m/min Band length: 5090 mm Band width: 34 mm Sheet thickness: 1.1 mm Vice pressure max.: 20 - 60 bar Voltage 50 Hz 3x: 400 Volt Power: 8 kW Machine´s weight about: 2150 kg Overall dimensions machine: Length: 2420 mm Width: 2240 mm Height: 1915 mm Various accessories: Automatic forward feed Coolant system: 100 l Chip conveyor

OSTAS ROUND BENDING MACHINE TYPE S 1070 x 76 -Capaciteit 1070 x 2 mm -Walsen Conisch -Bovenrol Wegdraaibare -Documentatie PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Screen deck: 1,500 x 6,000 mm, on new base frame, sand-blasted and new painted

DYNAJET 500th HELI ATC RC INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! The mobile and universally applicable dynaJET cold and hot water high-pressure cleaner In addition to its user-friendliness, 500th with up to 500 bar working pressure is characterized in particular by its low weight, compact dimensions and high level of performance and safety. Construction 1-axle chassis with pneumatic tyres for easy manoeuvring on site Self-supporting and indestructible framework for weight optimization Crane eyelet for easy transport and handling Underrun protection for additional safety Frame in dip painting technology for high corrosion protection and highest surface quality Targa concept with separation between unit side and operating side f ...

The Diper Design DEVANADORA D5-EH-V35 sheet profiling machine was built in 2004 by the Spanish company Diper Design. The machine is designed for profiling metal sheets with a maximum width of 1250 mm. The mandrel diameters (closed / open) are 450 and 550 mm, respectively, and the roller diameter is 1500 mm. The profiling machine works with a bending speed of 35 m / min. Roof flashings were produced on the machine. By using an appropriate matrix on the machine, it is possible to produce e.g. gutters, metal shelves, window sills, profiles, etc. The total weight of the machine is 5 tons. The machine is fully operational and ready for further work. Technical data of the Diper Design DEVANADORA D5-EH-V35 profiling machine - bending speed: 35 m / min - maximum sheet width: 1250 mm - roll diameter: 1500 mm - spindle diameter (closed): 450 mm - spindle diameter (open): 550 mm – maximu ...

OSTAS ROUND BENDING MACHINE TYPE SM 1070 x 76 -Capaciteit 1070 x 2 mm -Walsen Conisch -Bovenrol Wegdraaibare -Voetbediening -Noodstop -Documentatie -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Two and a half decker screener, screen area: 1,400 x 3,800 mm, electric motor, steel construction, etc.

Automatic labeling machine designed for automatic sticking of self-adhesive labels on cylindrical packages (bottles, jars, cans, etc.) and on packages with rectangular cross-section. After equipping the machine with a packaging orientator, it is also possible to label packaging with irregular cross-section (oval, lenticular, etc.) A single label is stuck on cylindrical packages, while flattened packages can be covered with two labels at the same time. The labeller can work independently or cooperate with other devices in the technological line. It is possible to apply alphanumeric characters to the labels by hot printing through the marking foil. Efficiency: depends on the size of the package and label, up to 3000 pcs / h Max packaging dimensions: length - 80 mm, height - 300 mm Maximum dimensions of labels: length - limited by the size of the package, height - 165 mm  ...

Tip height: 130 mm Top width: 450 mm Rotational speed: approx. 55-3000 rpm Pneumatic clamping system Spindle nose: W 25 Div. W25 collets available Div. holder available BERGER LAHR axis motors Combitec EIP E-500 control Manual control available Coolant system available Machine lamp available Machine feet available Dimension (Lxwxh): approx. 1400 x 560 x 1230 mm Weight: approx. 550 kg The machine is located in a clean good condition!

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 135 Operating hours: 1012 Technical data Table length: 700 mm Table width: 250 mm Longitudinal travel (X-axis): 320 mm Transversal travel (y axis): 220 mm Vertical travel (z axis): 410 mm Spindle speeds: stepless from: 56 rpm up to: 3150 rpm Taper in spindle: 30 ISO Feeds stepless: longitudinal from: 8 mm/min up to: 1000 mm/min transversal from: 8 mm/min up to: 1000 mm/min vertical from: 8 mm/min up to: 1000 mm/min Vertical quill travel: 60 mm Rapid traverse: longitudinal: 2 m/min transversal: 2 m/min vertical: 2 m/min Voltage 50 Hz 3x: 380 Volt Motor power: 1.8 kW Total power required: 2.6 kW Machine´s weight about: 1000 kg Overall dimensions machine: Length: 1800 mm Width: 1200 mm Height: 1500 mm Various accessories: Digital readout number of ...

full functional 2-colour /2 component injection molding machine K75-S 2F in L-Format Year 1996 Internationale Size 750H 200/100 L working hours: 32750 h controller: IQT 6 (german Text) clamping unit (extende tie bars +200mm) clamping force: 750 kN/ 75 tons distanc. tie bars: 420 x 420 mm platens dist. max: 850 mm (max) tool height: 400 mm (min) platens size: 605 x 605 mm ejector force: 34 kN ejector stroke: 150 mm centering: 125 mm (nozzle/ejtector plate) injection units +1. Aggregat+ horizontal injection unitt (intern. size 200) screw diameter: 30 mm shot volume: 85 ccm injection pressure 2350 bar 4 x heating zones +2.Aggregat+ vertical injection unit (intern. Size. 100) screw diameter 25 mm shot volume: 49 ccm injection pressure 2022 bar 3 x heating units Extras accumula ...

Maja SA 85 S compact flake ice machine, ice output 85 kg / 24 h, with integrated condensing unit. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.

Tip height 102 mm Top width 450 mm Leit.-/ spindle Collets W20 available Rotational speed: approx. 210 3000 rpm Reduction gear Links.-right rotation 2-stage drive L x W x H: CA. 1760 x 595 x 1230 mm Weight: approx. 650 kg

Center distance: 0 mm Grinding head Z-axis: 0 mm Center height: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 95 mm Distance between centres: 250 mm Table length: 450 mm Table width: 175 mm Max. grinding diameter: 130 mm Transversal way of the table: 260 mm Vertical adjustment of the table: 50 mm Vertical adjustment of grinding head: 50 mm Table swivels: 360 ° Slewing range of grinding head: horizontal: 360 ° vertical: 220 ° Grinding spindle speeds: number (steps): 2 from: 3750 rpm up to: 7500 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 0.7 HP Machine´s weight about: 450 kg Overall dimensions machine: Length: 1000 mm Height: 1500 mm Various accessories: Set of collets Dividing attachment 3-jaw chuck diameter: 85 mm Spiral flute grinding attachment

MAZAK laser cutting machine STX510 MKIII 4kW TOP CONDITION - LIKE NEW - ONLY 700 RUNNING HOURS year: 2012 refurbished, MAZAK lasercutting machine with 2500W table size: 3000mm x 1500mm machine dimension 2,9m x 7,3m chip conveyor LAN / USB connection automatic nozzle change fast piercing in heavy materials piercing sensor plasma sensor for stainless steel cutting burning sensor for mild stelle cutting full covered machine table FE: 22mm VA: 15mm ALMG: 10mm plastics possible to cut incl. software incl. exhauster option: warranty, setup, training option: fully automatic loading/unloading CELL system

Center distance: 0 mm Grinding head Z-axis: 0 mm Center height: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 115 mm Distance between centres: 720 mm Max. grinding diameter: 260 mm Distance from table to grinding spindle: min.: 70 mm max: 370 mm Longitudinal way of table: 520 mm Transversal way of the table: 270 mm Vertical adjustment of grinding head: 300 mm Table swivels: 360 ° Slewing range of grinding head: horizontal: 360 ° Grinding spindle speeds: number (steps): 4 from: 1100 rpm up to: 6000 rpm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 1.6 HP Machine´s weight about: 840 kg Overall dimensions machine: Length: 1800 mm Width: 1400 mm Height: 1700 mm Various accessories: Lamp Universal Vice swivelable

Maja SA 70 fragments of ice maker, ice power approx. 70 kg / 24 h, water consumption approx. 0, 07 m³ / 24 h, refrigerant R 404A. The machine can be visited like to 56070 Koblenz, and tested.

Handtmann FA 30 Top piston filling machine, piston filler for filling, portioning and linking. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany

Drill diameter maximum: 0 mm Drill diameter minimum: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. drill capacity: 3 mm Max. drill capacity: 40 mm Spitzwinkel min.: 40 ° max.: 180 ° Diameter of grinding wheel: 200 mm Width of the grinding wheel: 250 mm Drilling cap. of grind.wheel: 32 mm Grinding wheel speeds: from: 2800 rpm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 0.76 kW Machine´s weight about: 170 kg Overall dimensions machine: Length: 840 mm Width: 820 mm Height: 1200 mm Various accessories: 6-jaw chuck diameter: 130 mm Lamp Set of grinding wheels Set of flanges Coolant system Set of service tools

JPT-260 Planer - Thicknesser Planing width: 256 mm Drum: 3 - Strip cutter Engine power: 230V/400V 2650 W Thickness forward: 3-225 mm Feed speed: 5,5 m / min. Weight 170 kg G & JET-10000289T

Stirring machine - Make: REGO - Model: SM 4 (40 litres) - Condition: Top restored, with new boilers and tools - Warranty: 6 months

Center distance: 0 mm Grinding head Z-axis: 0 mm Center height: 0 mm CNC Brand: 0 CNC Model: 0 Control: GE FANUC Series 160i-MB Operating hours: 0 Technical data Number of axis simultaneous: 5 Table length: 500 mm Table width: 145 mm X axis: 380 mm Y axis: 300 mm Z axis: 280 mm grinding diameter: 240 mm Grinding-wheel diameter: 50 - 250 mm A axis (grinding head rotaion): 360 ° C axis (tool rotaion): 210 ° Resolution: 0.0001 ° Spindle nose: HSK: 50 Grinding spindle speeds: stepless from: 50 rpm up to: 10000 rpm Max forwarding speed: 20 m/min Max. forwarding speed cross: 5 m/min Max forwarding speed vertical: 20 m/min Voltage 50 Hz 3x: 400 Volt Spindle power: 9 kW Total power required: 27 kVA Machine´s weight about: 8000 kg Overall dimensions machine: Length: 2270 mm Width: 1700 mm Height: 2260 mm Various accessories: 3D measuring feeler gauge Set of collets Set of flanges Set of ...

max. Working Diameter 1100 mm EXCELLENT CONDITIONS

-Turret fence -Thread cutter table 600 x 320 mm Speed 40-3600 RPM Spindle diameter 65 mm Recording Aciera quick-change system Spindle stroke 120 mm Dimension WxDxH 90 x 130 x 185 cm Weight 800 kg

PIVOT AND DRILL FITTINGS Attacks left and right 2200 ´ mm Motor 400 V

Capacity round maximum diameter: 0 mm Angle degrees maximum: 0 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm Technical data Cut range: round up to: 220 mm Square: 220 mm hydraulic Cut length: min.: 6 mm max: 750 mm Max. automatic forward feed length: 750 mm Cutting speed: stepless from: 18 m/min up to: 110 m/min Band width: 1.3 mm Voltage 50 Hz 3x: 400 Volt Power: 4 kW Machine´s weight about: 1750 kg Overall dimensions machine: Length: 2050 mm Width: 2050 mm Height: 1300 mm Various accessories: Set of saw bands Roller conveyor Coolant system Material stops Workpiece counter

Hardware drill Ruchser RU EBL2, 5-S Masch. No. 00664-2-96 Weight approx. 700 kg Built in 1996 L x W x H: 350 x 80 x 130 cm The machine is in good condition, ready to use. Spare parts/service MATEC CH-4952 Eriswil/DE-79618 Rheinfelden Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A Positions ATC: 0   Tank contents: 0   CNC Brand: 0 CNC Model: 0 Technical data Table length: 500 mm Table width: 400 mm Number of spline: 3 T-channel width: 12 mm Distance of the T-slots: 125 mm Table load max.: 500 kg Longitudinal traverse (X-axis): 350 mm Cross traverse (Y-axis): 250 mm Height adjustment (Z-axis): 300 mm Working vessel:length inside: 800 mm Width: 550 mm Height: 370 mm Dielectric aggregate: Contents: 450 l Total power required: 5 kVA Voltage 50 Hz 3x: 400 Volt Machine´s weight about: 2500 kg Overall dimensions machine: Length: 3300 mm Width: 2400 mm Height: 2480 mm Various accessories: Loading roboter: Type: QCRi Pallet positions: 8 Holder: 54 Fire extinguishing system (without bottle) Interface serial port RS 232 Lamp