thermal oil boiler used for sale

Technical details Manufacturer: Robamat Automatisierungstechnik GmbH (Austria) Model: Thermocast 3212 Type: Industrial oil temperature control unit (thermoregulator) Year: 2002 Max temperature: 250°C Voltage: 400 V / 50 Hz Current: 35 A Control voltage: 24 V DC Control: Dual digital control panels System components: - Heating unit (thermal fluid heater) - Circulation pump - Heat exchanger - Pressure gauges - Main isolator switch Application: Mould temperature control, injection moulding, die casting, and industrial thermal processes Condition: Used, with wear and partial disassembly; functionality untested Dimensions and weight (approx.) Length: 1200 mm Width: 800 mm Height: 1300 mm Weight: 350 kg Auction-ID: A7-48441-170

Stirrer/pressure boiler with agitator GOAVEC 77BX02 in good used condition, as returned by the customer. Completely made of stainless steel, double-walled, heatable (steam), 6000 litres capacity, working pressure up to 3.5 bar, test pressure 2.5 bar, pneumatically operated filling lid. Dimensions W/D/H 250/320/325 cm. Operating voltage 380 volts. More on request.

Stirred boiler / silo tank van der Molen 05-031/01, built 2006, in good used condition. Completely made of stainless steel, 2850 litres capacity, double-walled, heatable (steam), filling from above or with external pump from below possible. Dimensions B/T/H 190/160/420. Operating voltage 400 volts. More on request.

1 STERLING STERLCO used diathermic oil boiler with electric heating type S-9026-J0 serial nr. 95E5517 Dual zone Heating Capacity Zone 1: 18 KW Heating Capacity Zone 2: 36 KW Total Heating Capacity: 54 KW Pump Motor (Zone 1): 1.5 KW / 2 HP Pump Motor (Zone 2): 1.5 KW / 2 HP complete with circulation pumps and high accurency temperature controlers 1" oil circulation pipes (up to 110 L/min) 1" vent pipes (up to 110 L/min)

FOR SALE – 2 OIL BOILERS IN 40 FT CONTAINERS – COMPLETE "PLUG & PLAY" PACK NEGOMAT INDUSTRIE offers 2 Atlantic Guillot LRR 49 boilers mounted in 40-foot insulated containers, fully equipped and never put into service. Ideal solution for temporary boiler rooms, industrial back-up or heating networks. ⚙️ Technical characteristics • Brand: Atlantic Guillot • Model: LRR 49 • Year: 2009 • Power: 1,400 to 1,650 kW • Max temperature: 110 °C • Water pressure: 6 bar • Burner: Weishaupt L8Z/2 • Burner power: 620 to 3,155 kW • Fuel oil: max consumption 265 kg/h • Electrical power: 5.82 kW • Condition: used equipment never used Comprehensive equipment • Insulated 40 ft container • Boiler + burner mounted and wired • Integrated hydraulic + electrical connections • Control box + regulation • Lighting + security • 100% plug & play  ...

Thermal store / buffertank with a nominal capacity of 40,000 litres on 2 steel bases. Contents: approx. 40 m³ / 40,000 litres Material: steel Diameter with insulation: 2.75 m Diameter without insulation: approx. 2,50 m Year built: approx 2007 Buffer in cylindrical shape. Insulated by mineral/glass fibres, 10cm thick. Panels are made of aluminium sheets. The container is in used state, and has been drained and cleaned professionally. The heat storage tank has a separate connection pair (forward / reverse) for the heat supply (E.g. from CHP, boiler) and heat extraction (e.g. from a heating network). Thus, a real buffering is possible, and a temporary extraction higher than the thermal power of the heat generator, eg. to deal with heat peaks. Optionally and at additional cost more pairs of connection can be installed to connect another heat generator to this buffer. Flanges  ...

Thermokuli,

THERMISCHE REINIGUNG PYROLYSE-OFEN Zykluszeit : 2 - 4 Stunden Beschickung : Wagen, manuelle Beschickung Isolierung : Keramikwolle + Steinwolle Dicke der Isolierung : 175 mm Höchsttemperatur : 1.260˚C Heizungsart : Direkt beheizt Heizquelle: Erdgas, Flüssiggas oder Diesel Brennkammern : 2 Sätze Überhitzungskontrolle : Wassersprühdüsen - 2 Stück Sicherheitskontrolle : Wassersprühdüsen - 2 Stück Backofen-Sicherheitstür : 1 Satz Schaltschrank : PLC-gesteuert, Schaltgeräte der Marke Schneider Electric Steuerungssystem : Bedienfeld mit Touchscreen und Softwaresystem MATERIAL Ofengehäuse : Stahlkonstruktion und Blech, spritzlackiert 1. Brennkammer: Schamottestein und feuerfester Zement, 1.400˚C 2. Brennkammer: Schamottestein und feuerfester Zement, 1.260˚C BETRIEBSTEMPERATUR 1. Brennkammer: 250 - 600˚C 2. Brennkammer: 800 - 1.100˚C Durchmesser  ...

36,000 m3 thermal oil supply system/exhaust air purification plant (special plant construction) WK, Year of construction: 2012, with heat recovery and cooling supply, The system is currently designed for two printing systems. Depending on the Machine equipment for 3 - 4 printing systems. The system consists of the following components: - 1 roof-mounted thermal post-combustion system / exhaust air purification WK Thermal Engineering Plant, boiler and apparatus construction WKTNV, year of construction: 2012, exhaust air volume at the inlet 36,000 m³/h, maximum permissible combustion chamber temperature max. 730 °C, burner type WK/H1 gas cone, Burner power 6,600 kW, fan power 200 kW, maximum permissible inlet temperature 210 °C, Maximum permissible solvent throughput 500 kg/h, natural gas heating medium, calorific value of the heating medium 32693 kJ/m³, max. heating fuel con ...

Nema NCG 4390 S Thermal Shock Chamber -40°C to +180°C Manufacturer: Nema Type: NCG 4390 S Temp. range: -40°C to +180°C Dew point range: +5 °C to +89 °C Mains voltage: 400 V Rated current: 32 A Nominal power: 15 kW Refrigerant: R 404 A Year of Make: 1999 Weight: 2720 kg External dimensions: W 3950 x D 1700 x H 2280 mm Chamber: W 3000 x D 1300 x H 1170 mm WLG DAMPF-O-MAT Electro-automatic steam humidifier and producer of mineral and odour-free steam Manufacturer: WLG DAMPF-O-MAT Type: EDB 8 Heating voltage: 400 V Power: 6 kW Steam volume: 8 kg/h Water-cooled condenser Manufacturer: Bitzer Water-cooled Mains voltage: 400 V Rated current: 13 A Nominal power: 4 kW Refrigerant: R 404 A Weight: 145 kg KK-08 More items - new and used - can be found in our shop! International shipping costs on request!

Vötsch VT 7030 S2 Thermal Shock Test Chamber -80 °C to +220 °C The Vötsch VT 7030 S2 Environmental Test Chamber is designed for laboratory applications that require testing of materials and components in a familiar environment. With its versatile capabilities and easy-to-use controls, this programmable unit can be used to simulate a wide range of environmental conditions for scientific studies, product testing, and process controls. Data for temperature tests in single-chamber operation Hot Chamber: Thermal shock test chamber Test chamber 300 l Temperature range +50 °C to +220 °C Temperature deviation in time in the middle of the usable space ± 1 K Temperature deviation spatially ± 2 K Temperature gradient (according to IEC 60068-3-5) 4 K Temperature change rate (according to IEC 60068-3-5, measured in supply air) Heating 11 K/min Cold chamber: Thermal shock te ...

Working width 400mm

Wire rod: 0.1 - 1.3 mm section area: 5 - 70 mm power: max. 400 rpm complete with cooling unit and driven wire reel; good

Thermal motor contactor relays, relays, heating current monitoring, preheating for generators, contactors, semiconductor contactors, contactors -60-100 A Class 10 -Weight: 0.8 kg

Fully automatic Thermal CTP exposure Heidelberg Suprasetter A 52; good condition; suitable for thermal printing plates; Meter reading 107.00 plates; Workflow Meta RIP and ZIP 3 output; integrated Auto Top Loader; Punch 425mm Autoplate; Suction for ablative printing plates; Transfer bridge; Washout G+J C 85; Printing plate forklift Grafoteam PST 26. Full automatic thermal plate setter Heidelberg Suprasetter A 52; good condition; used for thermal printing plates; counter only 107,000 plates; workflow Meta RIP with ZIP 3; auto plate loading system; punch 425mm autoplate; debris removal system; bridge; washing unit G+J C 85; plate stacker Grafoteam PST 26.

Thermal switch, circuit breaker, electrical circuit breaker -Imax: 10A/500 VAC 2A-24 VDC -Temperature: -30 °C/ 80 °C -Protection class: IP 65 -Weight: 0.4 kg

CNC-Portal Cutting Machine Manufacturer: Sato Type: Satronik D5765 Built: 2016 CNC control: Satocontrol CNC 3010 Track width: 5,750 mm 6 x oxyfuel torche without a career without table without filter

Welding iron -Welding bar: for welding plastics, from mask manufacturing machine -Thermal panels/air nozzles: 2 each -Dimensions: see photos -Number: 3x hangers available Price: per piece -Dimensions: 240/100/H55 mm -Weight: 0.7 kg/pc.

CNC portal flame cutting machine Manufacturer: MGM Type: Cortina DS3100 Retrofit 2022 CNC control: MS300 Track width: 3,100 mm 1 oxy-fuel burner gas type as desired Track length: 5 or 6 m without table

Agilent AriaDx Real Time PCR Thermal Cycler K8930AA Year of manufacture: 2021 Model: K8930AA With computer (ARIADX software installed) Without cables Excitation source: 8 dye-specific LEDs per optical module Detectors: 8 photodiodes Reaction volume: 10 to 30 μl Compatible chemistries: SYBR and TaqMan Thermal system: 6 Peltier modules (25.0 to 99.9 °C) Heating speed: 6.0 °C/s Cooling rate: 2.5 to 3.0 °C/s Thermal accuracy: ± 0.2 °C Thermal uniformity: ± 0.4 °C Data acquisition time: < 3 seconds for all channels Power supply: 100-240 V AC, 50/60 Hz Frequency: 1100 Hz Dimensions: 50 cm (W) x 46 cm (D) x 42 cm (H) Weight: 23 kg Sample Containers: 96-well plates, strip tubes, 0.2 mL tubes Operating conditions: 20 – 30 °C, relative humidity: 20 – 80 % (non-condensing) The device is fully functional, but the intervention of an AGILENT technician is necessa ...

Agilent AriaDx Real Time PCR Thermal Cycler K8930AA Year of manufacture: 2021 Model: K8930AA Without a computer Without cables Excitation source: 8 dye-specific LEDs per optical module Detectors: 8 photodiodes Reaction volume: 10 to 30 μl Compatible chemistries: SYBR and TaqMan Thermal system: 6 Peltier modules (25.0 to 99.9 °C) Heating speed: 6.0 °C/s Cooling rate: 2.5 to 3.0 °C/s Thermal accuracy: ± 0.2 °C Thermal uniformity: ± 0.4 °C Data acquisition time: < 3 seconds for all channels Power supply: 100-240 V AC, 50/60 Hz Frequency: 1100 Hz Dimensions: 50 cm (W) x 46 cm (D) x 42 cm (H) Weight: 23 kg Sample Containers: 96-well plates, strip tubes, 0.2 mL tubes Operating conditions: 20 – 30 °C, relative humidity: 20 – 80 % (non-condensing)

Applied Biosystems Thermo Fisher Scientific SimpliAmp IS VERIFLOW Thermal Cycler Year of manufacture: 2021 The SimpliAmp Thermal Cycler™ is a small-sized, easy-to-use, and accurate thermal cycler that meets the needs of any laboratory for everyday PCR activities. Thermal accuracy: ± 0.25°C (35°C to 99.9°C) For use with (equipment): GeneAmp 2700, GeneAmp 9700, Veriti Thermal Cycler, 2720 Thermal Cycler Dimensions: 46 x 24 x 21 cm (18.1 x 9.5 x 8.3 in) Voltage: 100 to 240 V Product Type: Thermal Cycler Temperature range: 0°C to 100°C Power: 600 W Number of programs: >1,000 protocols Weight: 8.3 kg (18.3 lbs) High-speed compatibility: Not compatible with broadband (manual) Thermal uniformity: < 0.5°C (20 s after reaching 95°C) Capacity: 96-well Display Type: 8-inch color TFT LCD touch screen User interface: USB, Wi-Fi, Ethernet Max. temperature rise: 4°C/s  ...

Flame separating machine Manufacturer: Kjellberg

Thermo Relief Machine, 15 ́

T63290IO - Armor INKANTO thermal transfer ribbon, AWR 470 wax, 90mm, black INKANTO thermal transfer ribbon, AWR 470 wax, roll width: 90mm, core: 25,4mm, length: 450m, color: black Features:

Exhaust air purification system Manufacturer: Langbein Engelbracht Type: DV2-92 Plant number: No.20245 Year of construction:2004 Exhaust air volume: min. 1000 - max. 3500 Nm³/h Pressure drop: 60 mbar Burner: Gas Burner Inlet temperature: 20°C Power: Heat exchanger 600 kW Heating capacity: 230 kW Reaction temperature: 820 - 950°C Included: documentation, chimney, PC for control with software, EURO-FID, piping (if desired), control cabinet Location: Neu-Ulm

Thermal imaging camera Infrared camera Brand: Infratec Type: PIR uc With suitcase

CNC Portal Flame Cutting Machine Manufacturer: Microstep Type: MasterCut-AM 9001.20 Year of Make: 2011 CNC control: iMSNC with integrated network card Working area: 2,000 x 9,000 mm Extraction table 1 oxy-fuel burner Cutting thickness up to 150 mm 1 plasma marking unit Kjellberg Laser pointer Technical data in detail: 1x oxy-fuel burner (1 x fully automatic) 1x plasma marking unit (fully automatic) Kjellberg Finsterwalde MicroStep® CNC machine control iMSNC with integrated network card LCD operator units on the gantry Laser pointer with automatic offset transmission Parameter database iMSNC control / Windows® "AsperWin-Basic" programming system, for programming directly on the machine control system Module Macro Library "AsperWin Select" Module NC Simulator "AsperWin NC-Sim" Module "Plasma Marking" (for graining) via plasma source Module "THC" / Automati ...

Maximum plate format 1422 x 1804 mm, incl. Automatic Pallet Loader APL 1 segment, inline punch, online processor Glunz & Jensen 165 HDX Immediately available, price ex location on request, delivery worldwide

Thermal transport container rollable MBB Conveyor and lifting systems FIXOTHERMER TYPE 6 volume 570 l Inside Dimensions: 600 x 650 x 1430 mm Outside Dimensions: 730 x 810 x 1730 mm Weight: 113 kg

(printing, laminating, punching) Equipment / Additional information: Car inspection stickers were last produced

A complete LTG Mailänder (now Koenig & Bauer) thermal exhaust air incineration plant is available. Exhaust air volume: 20000Nm³/h, max. solvent volume: 1.5g/m³, max. combustion chamber temperature: 850°C, fuel: natural gas, calorific value: 10kWh/m³, connected load: 45kW, solvent filter capacity: 30kg/h. Documentation available. On-site inspection is possible.

a used thermal laminating machine Billhöfer EK TL 4/70

Billhofer Ek 76 50 Year of manufacture 2001

Resolution: 2400 dpi Manual plate feed line Speed 21 pl/hr. Max. plate size max. 838 x 990 mm mm plate size min. 267 x 215 mm mm

Screen PTR 8600 E Built: 2010 Included one XMF for TIFF with PC. Developer G&J 125 – ZAC Available immediately.

CNC Portal Flame Cutting Machine Manufacturer: Bach Type: ACK-2D Year of Make: 2006 CNC Control: NBS300 Work table: 1.5 x 6 m 2 oxy-fuel burners

Width 35 cm Year of manufacture 1987 Thermal relief printing IR Dryer Mobile substructure Delivery date: short-term Price on request. We supply and install worldwide.

Gastronorm, HACCP, 600/400, large quantities

Manufacturer: CeraCon Model: CeraTHERM stack M Year of Manufacture: 2024 Condition : Excellent Find more here - / Contact us at -

new motherboard with Part Number 503-00286A or Visible Number 637-00173A-A

CNC gantry flame cutting machine Manufacturer: Messer Type: Omnimat P 7000 Year of Make: 1995 CNC Control: Global Control Plus Track width: 7,000 mm 8 x oxy-fuel burner type ALFA 8 x Omnilift 200 Without a running track Without table Without filter Reference Number: R2137

Fully automatic machine with automatic plate feeder consisting of 5 cassettes, identical to AGFA Avalon N8-60 XT, available at short notice, price on request

Melag Melatherm 10 DT Thermal Disinfector The Melag MelaTherm 10 DT is a cleaning and disinfection device (RDG) that has been specially developed for the mechanical reprocessing of instruments in medical and dental departments. It integrates important functions such as active drying and media collection directly into the device to save space in the practice. Dimensions: The device measures approx. 59.8 x 81.8 x 67.8 cm (W x H x D) and thus fits under a standard 60 cm worktop Capacity: The optimized reprocessing chamber can accommodate instrument sets of up to 45 patients per batch Active drying: Reliably protects instruments from corrosion and recontamination through integrated external and internal drying Integrated process media: Cleaner, neutralizer and rinse aid are stored in a drawer directly in the device to save space Manufacturer: Melag Type: Melatherm 10 DT Vo ...

The SBM 190 H Stick - Pack is a used flow wrapper that is ideal for the efficient and reliable packaging of small quantities of products. This machine is particularly adaptable and can package a wide variety of products with high speed and accuracy. Thanks to its robust construction and high-quality materials, the SBM 190 H guarantees a long service life and stable performance in continuous use. It is characterized by its easy operation and maintenance, which optimizes production times and reduces operating costs. This machine is perfect for use in various industrial sectors, including food, pharmaceuticals and cosmetics. If you are looking for a reliable and versatile packaging solution, the SBM 190 H Stick - Pack is probably the right choice for you., power: 10 - 20 bags / minute, Dimensions / weight: D x W x H: approx.: 1,250 x 800 x 1,800 mm (without product hopper above the machine) ...

Refrigeration compressor, refrigeration machine, refrigeration compressor, refrigeration unit, cooling compressor, compressor, filter dryer housing, shut-off valve, ball shut-off valve, temperature switch, thermostat, expansion valve, thermal expansion valve -Manufacturer: Alco, thermal expansion valve, unused in original packaging -Type: TIE-MW 55/PCN 802456 -Price per piece -Number: 2 piece -Dimension package: 105/80/H70 mm -Weight: 0.4 kg/piece

thermal switch, circuit breaker, electric circuit breaker, thermal switch, temperature switch, thermostat controller -Manufacturer: AEG, thermal switch thermostat controller unused original packaging -Type: EGO II K 662 980 599 -Voltage: 16(4)A/380V -Number: 2x controller available -Price per piece -Dimensions cardboard: 140/85/H40 mm -Weight: 0.1 kg/pc.

thermal exhaust air combustion system, exhaust gas filter system, exhaust gas filter system, exhaust gas filter, hot filter, industrial exhaust gas filter -Thermal exhaust air combustion plant: Manufacturer LTG Type 20000 Nm³/h -Protocols: regarding maintenance and emissions are available Documentation: complete -Combustion chamber temperature: 850° C -Heating fuel: Natural gas -Calorific value: 10 kWh/m³ -Connected load: 45 kW -Exhaust air volume: 20,000 Nm³/h -Max. solvent quantity: 1.5 g/m³ -Individual components: see photos

Eppendorf Mastercycler Ep Gradient s Realplex 2 Thermal Cycler Thermal cycler model 5345 + 6300 EPgradient S Weight: 20 kg Voltage: 220V Dimensions 60×30×50 cm Without software