therma used for sale

50mm x 4mm Oto Mills HF Tube Mill Make: Oto Mills Year New: 2003 Tube Diameter, 12.7mm – 51mm Wall Thickness: 0.8mm – 4mm Speed: 160 mpm Direction: L-R Coil Weight: 5 ton Entry Coil Car Double Mandrel Uncoiler Automatic End Joiner Vertical Accumulator Coil Straightener Forming Mill with 70Kw Motor & Drive Finn Passes with 45Kw Motor and Drive 300Kw Thermatool HF Welder Cooling Section Sizing Mill with 70Kw Motor & Drive Turk Head Stands Flying Cut-Off Saw Run Out Conveyor and End Table Tooling for Round and Profiles Electrics, Hydraulics, Controls

63mm x 2mm AEF / Thermatool ERW Tube Mill Make: AEF (American Electric Fusion) Tube Diameter: 15mm – 63.5mm Material Thickness: 0.5mm – 2mm Tube Length: 6 meters Double Mandrel Uncoiler Entry Shear & End Welder TIG Power Supply Vertical Accumulator Make: Kent Driven Entry and Exit Pinch Rolls Strip Guiding Unit Forming Mill Individual Gear Boxes Universal 50HP DC Motor Six (6) Forming Stand Five (5) Side Stands Welding Section Make: Thermatool Type: Vacuum ERW Design Power: 200Kw Mechanical Welding Head Beat Removing Head with Winder Cooling Tank & Pump

63mm x 3mm Oto Mills HF Tube Mill Make: Oto Mills, Model: 552, Tube Diameter: 10mm – 63.5mm, Material Thickness: 0.8mm – 3.2mm, Line Direction: Left to Right. 10,000Lb Double End Uncoiler & Coil Car, Automatic Coil Joiner, Vertical Accumulator, Coil Straightener, Forming, Fins, Sizing Sections, 70mm Shaft Diameter, Three (3) 100HP Motors and Drives, Coolant Section, 30Kw Thermatool HF Welder, Three (3) Turk Heads, Spare Rafted Stands, Run Out and End Tables, Tooling

Fiorini storage tank 1000 liters VKB 2.0 - 1000L 4" Storage tank 1000 litres, type VKB 2.0 - 1000L 4" • Cold water tank It is made of painted carbon steel sheet and insulated by closed-cell elastomer foam. This thermal insulation offers optimal resistance to condensation. • Charge valve As a result, the hydraulic circuit can be filled both during peak demand and during normal operation. •Safety valve The valve is set to 6 bar. By means of a channelled drain, it protects the module from overpressure. • Automatic air separator It is located on the upper part of the module and vents the air present in the module. • Drainage valve This drains the water from the deepest point of the reservoir to allow it to be emptied. •Case The base is made of thick lacquered sheet steel. The external panels are made of galvanized and painted sheet steel and are highly weather-resist ...

Number of labeling stations: 3 (label, back label, second back label/sticker/collar) N° 1 thermal capping head Hourly productivity: 800-1600 b/h Label reel diameter: 280 mm max Capsule autonomy: 300-600 pieces Pressure and air consumption: 4-6 bar, 50-170 l/min Dimensions: 2400x1170xh.2180 mm Weight: 680 kg

76mm x 6mm Oto Mills HF Tube Mill Year New: 2005, Tube Diameter, 12mm – 76mm, Wall Thickness: 1mm – 6mm, Speed: 140 mpm , Direction: L-R, Coil Weight: 10 ton. Entry Coil Car, Double Mandrel Uncoiler, Automatic End Joiner, Vertical Accumulator, Coil Straightener, Forming Mill with 110Kw Motor & Drive, Finn Passes with 70Kw Motor and Drive, 300Kw Thermatool HF Welder, Cooling Section, Sizing Mill with 110Kw Motor & Drive, Turk Head Stands, Flying Cut-Off Saw, Run Out Conveyor and End Table, Tooling for Round and Profiles, Electrics, Hydraulics, Controls

CHP Power Plant 800 kWe with 2xMWM TCG 2016V08 Gas Gensets Good condition and low operating hour 800 kWe / 400 V / 50 Hz combined heat and power (CHP) plant running on natural gas or biogas. The plant was delivered by MWM in 2011 and it operation was closed in 2021. Thermal energy is in form of hot water at 90°C and currently used for district heating purpose. Due to the low amount of biogas, cogeneration plant worked at low capacity (30-40%), and not around the clock. It has a complete gas treatment and mixing system to utilize biogas from landfilling which has 40 – 55 % of CH4. Power generators are installed in two soundproof containers, TEAM Evo WMW power plant control system and all electric switches and control cabinets are installed in separate control room. Heat recovery system is built next to genset containers. Both units have separate cooling radiators for engine cooling ...

Portal straightening press with 300 T capacity a) No-load and pressing speed up to 17 mm/sec b) Opening speed up to 55 mm/sec c) Table size 2500x1600mm d) Open height 700 mm e) Total size approx. LBH 4500 x 2300 x 3700 mm f) OIL temperature display on the tank g) Lubrication via lubrication nipples h) Table in grid construction, with T grooves according to customer requirements, otherwise 22mm i) Operation on swivel arm, mounted on the bridge j) Pressure setting from 50 T to 300 Tvia MONITOR k) Bridge moves through two geared motors, over racks l) Cylinder moves to the left and right over racks m) Machine body double painted n) Cylinder induction hardened Design Press type PORTALPRESSE Thermally neutral 80 – 120 °C Number of operating pages 3 pages Forces Pressing force max. 3,000 kN Free tearing force max. 500 kN Pressure build-up time Closed tool St ...

1230pcs LOKITEC Oil Radiator Electric Heater  This batch of high-quality electric oil radiators from LOKITEC provides an efficient and comfortable heating solution for various living and working areas. With an impressive wattage and a host of smart features, these radiators provide pleasant warmth and maximum comfort. Certifications: All oil radiators are CE, ROHS and CB certified, which ensures their safety and quality in accordance with international standards. Offering an outstanding combination of performance, efficiency and comfort, these oil radiators are ideal for use in a variety of environments. With their robust construction and numerous features, they are a reliable heating solution for cold winter days. Quantity: 1230 pieces  New RRP total € 190,510 Unit price 18,00 € net Transportation can be arranged by us.  Specifications and features: 1. LOKITE ...

Tag.64-n.1 iron structure for loading the product in Big Bags on load, n.2 steel augers of 130 lt each, winch with control flush, electrical panel, year 2004 volt 380, Olivari brand, mod. CTI 130, serial number 332, touch screen control panel for loading product located on the lower floor (masonry works are required to - Tag.65-n.1 Aspirator for medicine departmentTag.70-n.1 clock scale brand Alfa Bilici, max capacity kg 50Tag.76-n.1 iron structure with wire lifting winch, capacity 2000 kg, measures approx. 4000x h 4000 mm, IPE 120 beamsTag.77-n.1 saw circular countertop, Stayer brand, mod. TV507, year 1999, s/n 020741, 2100 watts, 3500 RPM, 355 mm disc diameter Tag.90-n.1 watch scale brand Futura weighed max kg 150, n.1 watch scale brand Odeca, max weight kg 300Tag.97-n.2 scales with thermal printer and load cell brand Dini Argeo, Mod. DFWO6, s/n 12788622, dig ...

Type: 300 liter Machine include intermediate stainless steel thermal oil chamber, internal expansion chamber, high-performance thermal fluid, and internal drainage tap Cover: Insulated, with springs and hinges of stainless steel, opening 90° Two internal safety thermostats Capacity: 300 liter Machine dimensions in cm: Length: 100 Width: 94 Height: 122 Electric power: 18kW Delivery time: 15 working days after advanced payment

1 MÜLLER air jet label loom MÜJET 2S type MBJL 2S 115, specification SPE5 1536/1152 T, year 10-2001, commissioned in 2002, tafeta machine, 8 colours, 740 rpm, MÜDATA 300, machine delivered with 3 weft feeders, 1 warp beam, 1 cloth roller, 20 thermal cutters

Dresan 11 hot plate hydraulic press. Four pistons and 6 kg/cm2, automatic opening with timer or manual opening using a lever. Includes thermal and hydraulic oil. Circulation pump and thermometer. It works perfectly and can be viewed at any time.

Single-chamber spray cleaning system FRANKE SRF-1000 l-RRS - Year of construction 09/2001 - 3 tanks -Stainless steel - Thermal insulation of the system - Spraying system arranged on all sides - Spray pipes with nozzle loading - Thermostatic heating control - Overheating protection for heaters - Level monitoring - Steam extraction fan - Removable filter basket - Lifting door with electromechanical drive - PLC control - SRF with special usable height and sliding door as well as transverse transfer carriage - Cleaning medium: water-soluble, non-flammable cleaners - Usable dimensions 1450x1450x1000 mm – 1000 kg - Electrical connection 3x 400 V 50 Hz + PE + N - Compressed air connection 6 bar - Fresh water connection 1/2" - Transport data System 3050x2200x3000 mm – 3000 kg Cart 1100x1150x300 mm – 45 kg Transverse sliding device 3800x1200x930 mm – 60 k ...

Pellet oven Häussler Habomat 20 wood pellet Häussler Habomat 20 - Voltage: 230 Volt - Frequency: 20 Hz - Electricity: - Ignition phase: 7.3 A - Operation: 0.81A - Rated thermal input: 35 kW - Fuel: Wood pellets HP5 - Year of construction 2011

On offer are three Biomek systems by Beckman Coulter; two i5 and one i7 system. We also have a Class II enclosure (BioMAT2 Robotic by Contained Air Solutions) for housing one of the i5 machines. The machine's configurations are as follows: BIOMEK i7: Hybrid configuration with one 96-channel 1-300μL pipetting head and one span8 pipetting head that can be operated in either 5-1000μL pipetting mode or in continuous dispense mode. This unit also includes a roof-mounted HEPA unit. first BIOMEK i5 comes with a 96-channel 5-1200μL pipetting head, a side cabinet and an integrated thermal microplate sealer (PlateLoc by Agilent Technologies) and various deck-position units such as a positive positioner, an orbital shaker, and a peltier element. The second BIOMEK i5 has one Span8 pipetting head, which can be operated in either 5-1000μL pipetting mode or in continuous dispense mod ...

Electric power - voltage 220 V, Frequency 50 Hz Current 1.7 A. Label dimensions: 100x100. Distance between labels: from 2 to 20 mm. Thermal print head - resolution 7.0 p Weight from 1g to 6000g. Maximum labeling capacity - 60 packages/minute

NATURAL GAS THERMAL POWER PLANT CONSISTING OF 3 CUMMINS 1750GQPB GENERATOR SETS (QSV91-G ENGINE) Fully equipped natural gas thermal power plant. 01 CUMMINS manufactured generator set, Gas, model 1750GQPB (E02K251030), comprising Cummins QSV91-G Engine (66300362) and PCS; with 7695 operating hours. 01 CUMMINS manufactured generator set, Gas, model 1750GQPB (E02K251410), comprising Cummins QSV91-G Engine (66300363) and PCS; with 8746 operating hours. 01 CUMMINS manufactured generator set, Gas, model 1750GQPB (E02K251420), comprising Cummins QSV91-G Engine (66300359) and PCS; with 8061 operating hours. Electrical panels and controls for the respective equipment; DMC 300 (paralleling equipment); QTA (Automatic Transfer Switch); Noise attenuators; 02 Water towers, pumps, and associated cooling system pipes; 01 small transformer, switches, and cable trays; Maintenance switches and ...

20-15- Timber drying kiln (new) Type CSD-HT-BR 70 Internal dimensions (width x depth x height) 7500 x 7160 x 4100 mm External dimensions (width x depth x height) 8080 x 7760 x 5500 mm The section of the structural columns of the chamber is 160 x 70 mm Snow load for the roof is 80 Kg/m2 Wind resistance of walls 27.8 m/sec Warming with glass wool Walls ǂ100mm Roof ǂ100mm Door ǂ100mm Door: sliding type, hung on a rail Wood for drying: various Loading the drying chamber with a forklift The heating system is gas Fuel - GPL gas Maximum thermal energy (300 kW) Maximum chamber temperature 75 °C The number of fans in the chamber is 5x3kw The total capacity of the fans is 162,500 m3/hour Number of probes: 4 HT/ 8 AWM/ 2 EMC/ 2 Temperature Voltage 400 V 50 Hz Total power 17kw)

The iCombi Pro is the latest combi steamer from RATIONAL. The iCombi Pro 10-1/1 Electric model with 10 shelves GN 1/1 is easy to use, even for unskilled personnel, as you can achieve outstanding food quality without the need for supervision. The device has been tested in our in-house specialist workshop and is fully functional. The undercarriage shown is not part of the offer, but can be purchased for an additional charge. The RRP. amounts to 15.090 € net The price quoted is net plus 19% VAT. Service: We would be happy to put you in touch with a certified Rational customer service throughout Germany. Our equipment service for you: •6 months warranty on all electrical parts • High-quality branded appliances at fair prices • Professional and competent advice - before and after the purchase •Free shipping within Germany (excl. islands/mountain stations) • Pr ...

Offered here is a vacuum evaporator for wastewater from Korrotherm, model K750. Suitable for chloride-containing and aggressive wastewater Completely technically overhauled and not put into operation since then - like new The Korrodest evaporator system provides a fully automatic low-temperature evaporator system, which is largely autonomous, i.e. without permanent monitoring. by operating personnel. The plant is designed for the processing of diluted, even chloride- and sulphur-containing rinsing water from surface technology. The incurred Rinsing water is thermal, in a vacuum of about 50 mBar, corresponding to about +35°C evaporated and separated into two components. On the one hand, in the distillate, which can be produced up to 98% of the volume flow rate, and on the other hand into the concentrate, which can be concentrated to a density of approximately 1.3 – 1.35  ...

Tool holder shaft type: BT 40 Tool holder shaft type:Futter / Chuck Tool holder shaft type:Thermoschrumpfung /Thermal shrinking Big selection of BT 40 Tool holders for sale. All kinds of Weldon, Collet, Chucker, thermal shrinking etc. available.

discharge pressure: 100 tons; power: 36 Kw; Equipped with thermally oil-heated ceramic plates

The gravure printing machine was used for wallpaper and other substrates. Number of printing units: 7, track width: 59mm, max. printing width: 53mm, max. roll diameter: 1000mm. King shaft drive / DW 1 + 7, single drive possible. Unwinding with lifting platform aid. Intermediate dryer operated with thermal oil. Paper and non-woven printing substrate, register control.

Electrical output: 5.5kW, thermal output: 14.8kW, power consumption: 20.5kW. Max. Flow temperature: 95°C, max. return temperature: 70°C, operating pressure: 5bar. Dimensions X/Y/Z without controller: approx. 1000mm/720mm/1070mm, weight: 530kg, operating hours: 66773, fuel: natural gas. Including condenser and MSR 2 control. Documentation available.

Size: 580 x 740 mm Equipments: Automatic thermal film laminating machine min sheet size 210 x 210 mm Material weight 105-500 gsm Max sheet size 580 x 740 mm Dimensions 3660 x 1278 x 1780 mm

Double column press with 200 T output, Idle speed 45 mm/sec Opening speed 60 mm/sec Starting press speed 9 mm/sec Table size 2000x600mm Plunger size 2000x600mm OIL temperature monitoring Manual lubrication Free positioning of the plunger ( adjustable via adjustable sensors ) PILZ photoelectric sensors 14.1 mm on front and back Circulatory oil cooling Pressure retaining valve 0 to 600 sec. Mechanical plunger protection at the upper breakpoint T-grooves according to DIN, and according to customer requirements Pressure adjustment from 40 T to 200 T (adjustable via rotary knob) Travel limitation optionally via pressure or position Set-up operation, single stroke ( adjustable via key switch ) Two-hand operation Construction, commissioning, instruction against separate calculation Design Press design double column press Therma ...

The machine is used for Vacuum Thermo sealing with optional inert gas injection for PVC trays and has a Buch vacuum pump. In the kit with the machine we also have a die and a thermal sealing head, set with r/r: 325mm×265mm. The machine also has plate forms for plates: 150×150mm and 145mm×240mm of each ×2 pcs. And 150mm×220mm 2 pcs. The machine comes with 1 year warranty, delivery, installation, samples and training

Main characteristics: Stainless steel construction, solid construction; Capacity – 35 l.; Maximum capacity – 30 kg; 400 V, 3Ph, 50 Hz, 1.1 kW; 3 filling funnels for it are offered in the price: 12 mm., 20 mm., 30 mm.; Automatic process - starting and stopping the motor from a contactor when the knee lever is pressed; High working pressure, suitable for dense and cold mixtures; Easy speed adjustment; Automatic piston decompression; Automatic lid locking; Automatic knee lever until it reaches a lower position; Hydraulic oil tank with oil level indicator Motor thermal protection Easy disassembly, allows quick access to all parts and their cleaning. The round shape of the cauldron is precisely made with the corresponding diameter for an easier work process High pressure for thick and cool mixtures; Plates and rings with long wear life;  ...

Manufacturer: Gietart Type: GW 1530-425 Year of construction: 1979 Location: Papenburg Operating hours: approx. 7,150 blasting hours (from 2001 onwards) Components: 1. Support crane 2x3,2 to. with Truninger profile magnet system (optional) 2. 5 transverse transports approx. 10.50 m 3. 13 m inlet roller table 4. Preheating furnace with 4x80 kW thermal power Bottom/Top 5. Gietart blasting system GW 1530-425, YOC 1979, (W:1,5mxH0,4m), 4 x 18,5kW centrifugal units 6. Gietart Lackiercenter BJ 2000 7. Drying tunnel approx. 10 m 8. Chain conveyor approx. 13 m 9. Color filter Donaldson Torit DFT 3-12 BJ 2000 incl. Precoater 10. Jet filter Donaldson Torit TD 6120 - 0 incl. afterfilter (police filter) for indoor installation 11. 13 m roller conveyor 12. 5 transverse transports approx. 6 m 13. Crane system 2x3,2 to. with Demag magnet system (optional) The complete plant was ...

installation consisting of the following components: - glue station for 2-component glue - Input table with motorized rollers and 90 ? rotation - Composition table and loading in the press - Press model FAST / 130 - Horizontal pressure installation mounted on adjusted beam - Outfeed roller conveyor, not motorised technical data: dimensions of strips: length: 900 to 8,000 mm width: 20 to 45 mm height: 50 to 200 mm plates to be produced: length 8000 mm, 2 x 4000 mm, 4 x 2000 mm or 4 x 900 mm Bonding press: Dimensions: 1300 x 8500 mm press opening: 250 mm. Total pressure: approx. 200 tons 12 x overhead hydraulic pressure cylinders 2 rows of cylinders can be switched off 17 x lateral cylinders, individually switchable horizontal pressure 7 kg / cm? Attached electric boiler for thermal oil

Hydraulic 20 T single-stand production press for the production of lightweight concrete parts Here are the technical data of the offered machine: If the press does not exactly meet your requirements profile, please request an individual offer exactly according to your wishes with one click: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your wishes at surprisingly low prices! Technical data + information: a) Closing speed up to 10 mm/sec b) Opening speed up to 20 mm/sec c) Open maximum height 300 mm d) Pressing speed 4 – 10 mm/sec. ( adjustable via rotary knob ) e) Mould size 600x800 mm f) Plunger size950x600 mm g) Manual lubrication( via lubrication nipples ) h) Pressure setting from 5 T to 20 ( adjustable via rotary knob ) i) Travel 300 mm j) Construction, commissioning, instruction against separate calculation  ...

Vial labelling & packing line for vaccines, etc. in 2R vials (diameter of 16 +/- 0.25 mm x height of 35 +/- 0.5 mm) and 3 ml. vials (diameter of 16.25 +/- 0.15 mm x height of 35 +/- 0.5 mm) comprising Herma132M HC wrap-around labeller (400/min.), with infeed rotary table suitable for PP-trays with inner dimensions of 428 x 244 x 42 mm (LxWxH), Videojet DataFlex 6530 thermal transfer printer (up to 3 lines each of max. 18 variable alphanumeric characters) for printing the variable data on the labels (expiry date, batch no., etc.) with camera print and code checking, luminescence sensors for checking the presence of the labels with reject system, Siemens IPC 277E 12 color touchscreen, Siemens S7-1500 PLC, vials are leaving the labeller at 90° feeding directly into Uhlmann carton tray opener & closer (15-150 trays/min., tray size min: 30 x10 x 60 mm (WxHxL), max. 100 x 95 x 165 mm (WxHxL)) ...

SAF OPTITOME 15 CNC plasma cutting machine was built in France in 2003. The machine is used to cut shapes in workpieces made of stainless steel, mild steel or aluminium. Depending on the previously choiceed nozzle, workpieces can have a thickness from 2 or 3 mm up to 18 mm. The high cutting quality is achieved thanks to the use of a lightweight and rigid transverse beam with efficient drive, mounted on an extremely rigid and robust machine frame. The installed working table with dimensions (L x W) of 3000 x 1500 mm allows the reduction of mechanical stresses arising during thermal cutting or sheet loading/unloading. The plasma cutting machine is supplied with equipment consisting of among others: a NERTAJET HP 125 plasma source with a power of 125 A and a DIGISAF 100 CNC control. Technical data of the SAF OPTITOME 15 plasma - materials to be cut: stainless steel, mild steel, alumi ...

automatic case erector + case sealer T-100 BDE, case sealer T-10 year 1999, pallet loader PD-120, Thermal ink jet system Diagraph IJ 3000 ES autmatic erecting station + carton seamer T-100 BDE, carton sealer T-10 year of construction 1999, Layer palletizer PD-120, Thermal ink jet system Diagraph IJ 3000 ES

- Thread cutting device - Control panel with OLED display - LED lighting - Quickly adjustable and ergonomic drilling depth stop - Infinitely variable speed control via central rotary knob - Thermal overload protection - Spindle stop - Drilling protection with electr. Hedge - Connection cable with Schuko plug SPECIFICATIONS - Spindle: B16 - Drilling depth: 60 mm - Projection: 220 mm - Column Ø: 70 mm - Spindle/work surface: 140 – 315 mm - Drill head height adjustment: by hand - Speed display: Digital - Drilling depth display: Digital - Feed (mm/revolution): by hand - Spindle speeds infinitely variable: 60 – 6,000 1/min - Continuous/normal drilling capacity: 10/12 mm - Thread cutting performance (depending on slope): M6 - FACTORY WARRANTY: 3 years (single shift) - OPTION Drilling package (No. 296570) Machine vice Flott [felix] 80 and quick-release drill c ...

Rip Software Kodak Prinergy Evo 8.1 Total 26292 Plates 830 nm thermal imaging platesetter Multi-cassette unit (MCU) S speed: 17 plates per hour Resolution Continuous variable 2032 to 3048 dpi (80 to 120 dpmm) 250 lpi max linescreen plate size: 685 x 762 mm (26.96 x 30 in.) Min. plate size: 300 x 228 mm (12 x 9 in.) image area size: 673 x 762 mm (26.5 x 30 in.)

Standard equipment: robust, high-quality and inclined rotary hood for easy reading of the speed LED lighting quickly adjustable and ergonomic drilling depth stop infinitely variable speed control Connection cable with SCHUCO plug (1.2 m) Undervoltage outlets Drilling protection with electr. Hedge thermal overload protection Emergency Stop Impact Button Weight in kg: 44 Motor kW: 0,45 AC 230 V Speed 1/min: 250-3000 Drilling capacity mm: - Steel Ø 12 mm - Aluminium Ø 20 mm - Softwood Ø 40 mm - Drilling depth 60 mm - Projection 220 mm - Saeulen diameter 70 mm - usable table area (W x L) 300 x 250 mm - T-groove size number 2, distance 100 mm Dimensions width 14/26 mm - Spindle B 16 - Speed display digital - Drilling depth display: scale - Drill depth stop: quickly adjustable stop ring - Feed: by hand - FACTORY WARRANTY: 3 years - free domicile incl. packa ...

Process tank -crystallizer. Capacity: 8 m3 Cooling / heating jacket thermal insulation stirrer

Robust stainless steel construction Barrel bottom and cylinder ram in stainless steel Round, mechanized barrel, internally grinded Perfect internal diameter and sealing High pressure for dens and cold removable mixtures Thermally protected motor Electric power: 1.5kW Length: 50cm Width: 70cm Height: 110cm Delivery time: 10 working days after advanced payment

FANUC M-710iC/50 robotic welding machine is used to perform the pad welding process – coating the surface of molten workpieces with a layer of powder, in order to complete defects in the workpiece or to give it new features. The robotic welding machine includes: – FANUC M-710iC/50 robot – COHERENT HighLight D-Series 10kW laser head – COHERENT HightLight 10000D laser head controller – THERMACH INC. AT-1200 POWDER FEEDER powder feeder unit – RIEDEL chiller PC 321.2H6LE.I – rotary table, consisting of TAKOMAT RT400 turntable and FANUC motors The FANUC M-710iC welding robot is distinguished by its robust, completely water- and dust-resistant body and its compact dimensions, which allow it to be installed in any position on a limited amount of space. All this, combined with high axial speeds and a reach of 2050 mm, makes the FANUC M-710iC/50 robot perform perfectly w ...

CAPSULING MACHINE AMS FERRARI FOR PVC Year : 2015 Single thermal heads with double ventilations Distribution capsules by plateau Speed: 2500 bph Equiped with nr.1 round bottle (diam. 98-100mm)

Capsuling machine ROBINO&GALANDRINO for PVC Year: 1994. Speed: 3.500 BPH. Direction: clockwise. Single thermal head for PVC capsules. Safety protections.

Capsuling machine NORTAN for PVC and Champagne Year 1992 Clockwise direction 6 thermal heads for PVC capsules 6 heads for champagne capsules (These heads don’t make the folds, but just iron the capsule on the bottle) Capsules’ storage by plateau Many bottles equipment included Safety Protections

Capsuling machine NORTAN 8.8 Speed: 12.000 bph on pvc 8.000 bph on champagne 8heads for champagne. No capsule distributor 8 thermal heads. Safety protections.

BATES Fully automatic valve bag filling, Thermal valve welding, 140 – 180 bags / hour (25 kg, 50 kg), food/non-food, refurbished, like new Description SPECIFICATIONS Valve bag filling, manufacturer Bates, year of construction 1992. The system is designed for the bagging of dry, fine powder in valve bags, whose valve width V = 135 mm (clear width). Since all parts in contact with the product are made of stainless steel, this system is suitable for both the food and non-food sectors. (From a purely technical point of view, ATEX is also fulfilled – but there is NO longer any guarantee for this.) Depending on the product and its characteristics, the production capacity of 25.0 kg bags is approx. 140 – 180 bags/hour. Of course, the system can also process 50.0 kg bags. The offered installation consists of several components: 1. 60FFED fully automatic filling machine  ...

Capsuling machine NORTAN mod. PRISMA 8+8+8 Speed: 12.000 bph on pvc capsules 8.000 bph on champagne capsules 7.000 bph on polylaminate capsules Year: 2003 Direction: Clockwise Model: PRISMA 8-8-8 8 ruller heads for polylaminate capsules. 8 thermal heads for pvc capsules. 8 heads for champagne heads. Long autonomy capsule distribution. Safety protections.

Capsuling machine NORTAN – UNICAP 35 Year: 1993. Speed: 2.500 bph. Direction: Clockwise. Capsules distribution with plateau system. Single thermal head for PVC capsules. Safety protections.

capsuling machine ROBINO&GALANDRINO | Z 9T Year: 2002 Speed: 16.000 bph Senso di marcia: Orario Model: MONOSTADIO Z 9T 9 thermal heads | Pvc capsules Long autonomy storage capsules Safety protections

Capsuling machine ROBINO&GALANDRINO – VULCAN 3000 Year: 1997 Speed: 2.500 bph Direction: Clockwise Plateau capsules distribution. Single thermal head – pvc capsules An additional interchangeable pvc head for XXL cpasules Model: VULCAN 3000 Safety protections.