therma used for sale

- Manufacturer: CFS – GEA - Machine number: Cook Star 1000/12/75 – 382 - Year built: 2006 - Type: thermal - Heating capacity: 1200 kW - Total power: 102 kW - Current: 175 A - Supply voltage: 460 – 3 – 60 Hz - Number of turns: 2 x 6 - Treadmill: Omnigrill small department - Max. belt load: 15 Kg / m - Cooking length (Net): 160 m - Retention time (min-max): 6.5 – 195 min - Product speed: (max-min): 24.6 – 0.82 m /min - Entrance height: 1150 mm - Output height: 1150 mm - Weight: 40000 Kg (40 t) THERMAL OIL SPIRAL - Thermal oil spiral capacity: 1200 kW - Max. air temperature: 200 °C - Thermal oil inlet temperature: 300 °C - Volumestream thermal oil: 2 x 42 m3/h - Thermal oil spiral resistance and temperature regulation: 2.24 bar - Thermal oil spiral with max. permissible suppression: 8 bar - Oil volume incl. temperature regulation: 1000 L - Connection ...

Key data: 500 mm, 200 mm

JANUS HTC2050 CNC lathe was built in Poland in 2010. The machine, characterised by high stability and operational reliability, uses the necessary equipment for high-speed and finishing machining, allowing for precise machining of internal holes, columns, cones, arches and all types of screw threads. The machine uses a high-speed spindle with infinitely variable rotation speed from 40 to 4000 rpm and a bed inclined by 45°, which facilitates chip removal and increases the cutting force transmitted by the horizontal bed and its head. Rear and front spindle angular contact bearings simultaneously transfer radial and axial loads, ensuring low spindle temperature rise and less thermal deformation during high-speed finishing. The JANUS lathe equipment includes a state-of-the-art FANUC Series 0i Mate-TC CNC controller, a chip conveyor and the tools shown in the photos. The total weight of th ...

High-speed labeling train from the manufacturer BIZERBA, model GLM-i. Composed of 3 labeler heads: 2 upper and 1 lower. Weighing range: up to 15kg. Printing mode: direct thermal. Print resolution: 8 dots. Print speed: maximum 300 mm/s. Label size: minimum 30mm / 30mm, up to maximum 100mm / 100mm. Core diameter: 76 mm. Label roll diameter: outer 300 mm. Labeling technology: air applicator. Interfaces: ethernet and RS232 standard. RS 485, TTY. Packet recognition: Working temperature: from 0º to +40º Electrical power 230V, 50Hz, 24A. Pneumatic pressure. 6 bar. External measurements: 3050 mm long x 1000 mm wide x 1700 mm high.

NOXMAN thermal oil boiler.

LIQUIDATION of labeling and automatic weighing train of the German manufacturer BIZERBA model GV1260.  Automatic labeling and weighing system for packaged products in the food area, cardboard boxes, large containers. Industrial equipment. Electrical power: Voltage 220 V, Frequency 50 Hz Current 1.7 A. Dimensions of ribbon width 650 mm long x 600 mm wide. Minimum and maximum dimensions of the package: length 100 mm-600 mm, width 50 mm-600 mm, height 20 mm-350mm. External dimensions of the machine: (mm) 2150 long x 1000 wide x 1880 high. Thermal print head - 8.0 point resolution. Weighing from 5gr to 30.000gr. Maximum labeling capacity 32 packs/minute. The equipment reviewed, rebuilt and guaranteed with the following maintenance performed: change of conveyor belts, thermal print head and motor belts.  High quality equipment and great performance in terms of speed and ...

Labelling machine Manufacturer SES Type SES-107 TTF Year of manufacture 2003 2-sided carton labeling machine including thermal transfer printer (1x top, 1x side) 2x SES 107TTF installed on the left side label width 116 mm min. label width Label width 25 mm min. label height Label height 15 mm Print width 106.6 mm, max. print height 1,500 mm Print speed 300 mm/sec, labelling speed 0-18 m/min

Automatic labeling and weighing train from the German manufacturer BIZERBA model GV. Automatic labeling and weighing system for packaged products in the food area. Superior double labeling. Industrial equipment. Electrical power: Voltage 220 V, Frequency 50 Hz Current 2.4 A. Maximum package dimensions: 300 mm wide x 540 mm long x 240 mm high External dimensions of the machine: (mm) 3100 long x 720 wide x 1700 high. Thermal printhead - 8, 0 dot resolution Memory: 2 MB Weighing from 1gr to 6000gr. Maximum labeling capacity 60 packs/minute. The equipment reviewed, rebuilt and guaranteed with the following maintenance performed: change of conveyor belts, thermal print head and motor belts.  High quality equipment and great performance in terms of speed and reliability.

cutting diameter: 360 mm saw band length: 4800 mm cutting width: 510 mm : 360 x 360 mm Capacity 90° rectangular: 510 x 360 mm : 360 mm : 360 x 360 mm Capacity 45° rectangular: 390 x 360 mm : 360 mm : 360 x 360 mm : 510 x 360 mm capacity 60 degrees: round: 200 mm capacity 60 degrees: square: 200 x 200 mm capacity 60 degrees: flat: 200 x 360 mm speed: 20 -100 stufenlos m/min main drive: 3,4 kW dimensions of saw-band: 4800 x 34 x 1,1 mm weight of the machine ca.: 1,45 t dimensions of the machine ca.: 2,65 x 1,2 x 1,87 m Machine description : • semi-automatic double miter for cutting profiles and Solid material in steel and non-ferrous material and excellentprice-performance ratio • robust constructed monoblock saw frame • manually swiveling saw frame with hydraulic clamping for optimal Miter (not BMSY 270 DGH ) • miter on mobile control panel digitally readable (no ...

Automatic labeller and weigher from the German manufacturer BIZERBA model GV. Automatic labeling and weighing system for packaged products in the food area. Industrial equipment. Equipment ready for PC connection, Bizerba software allows the realization and design of labels adapted to your needs. Ability to print all types of barcodes, customer logos, etc. The equipment reviewed, rebuilt and guaranteed with the following maintenance performed: change of conveyor belts, thermal print head and motor belts. High quality equipment and great performance in terms of speed and reliability. Electrical power: Voltage 220 V, Frequency 50 Hz Current 1.7 A. Dimensions of tape width 300 mm. External dimensions of the machine: (mm) 1860 long x 720 wide x 1300 high. Blower labeling compressed air feed: air pressure: 6 bar, air flow: min. 100 l/min, compressed air. oil-free ...

Automatic labeling train from the manufacturer BIZERBA, GLE model, Automatic equipment with static weighing for weight labeling and fixed prices (WITHOUT SCALE) High quality equipment and great performance in terms of speed and reliability. Allows you to label products with weight information and fixed prices. Ideal for top labeling. OUTSTANDING FEATURES   Possibility to label fixed weight-amount. Order Management Tagging totals Generic traceability on label Adapted to comply with EU regulation 1169/2011 regarding food information. Barcodes: EAN-8, EAN-13, EAN-128, CODE 128, ITF-14, GS1 Datamatrix and GS1 Databar (up to 4 codes per label). WEIGHING TYPE Static, with tape width 300 x length 430 mm. LABELLING SYSTEM TYPE OF PRINTING Direct thermal.- PRINT HEAD. Long-lasting head and resolution 8 dots/mm APPLICATION OF LABELS Applica ...

Automatic labeling train manufactured by Dibal, model LS 3130, Automatic equipment with Static weighing to label weight and fixed prices. Allows you to label products with weight information and fixed prices. Ideal for top labeling. LS-3130 SERIES MODEL WEIGHING TYPE Dynamic and static. 6 kg / 2 g with L270 x A430 mm trolley. LABELLING SYSTEM TYPE OF PRINTING Direct thermal and ribon. PRINT HEAD. 3 ́ ́ long life and resolution 8 dots / mm APPLICATION OF LABELS Pneumatic piston applicator, in upper labeller also possibility by air blowing "Air-jet ®" (AA LABEL Top label, from A30 x L35 mm, up to A80 x L100 (3") STRUCTURE – CONSTRUCTION AISI 304 stainless steel and anodized aluminum FEED. Electrical: 230 V and 50 Hz; 115 V and 60 Hz. Air: max. 150 l/min (at 5-8 bar) MACHINE MEASUREMENTS Tape height 800 x 950 adjustable legs. Maximum height 1450-1860  ...

FOD ovens main advantage lies on its particle contamination class assurance. Fedegari guarantees the contamination level to remain under the established standards values for 100 class. This accuracy is verified also during the most critical phases such as heating and cooling, when the thermal expansion of the filters may release a great amount of particles. Particulate contamination control originates from complex fluid dynamic studies and a close collaboration with Camfil, the world's most respected filter manufacturer, with whom Fedegari works at the development of high-temperature filters. FOD ovens, such as autoclaves, run batch processes and are the ideal solution for the sterilization of all those production lines in which the variability of products, batches and formats do not allow the use of continuous sterilizers such as tunnels. • Single-leaf flush door on both sides ...

Thermal oil boiler Heuft HK 80 -with burner -Heating capacity : 80 kW -zul. Operating overpressure : 4 bar -zul. Operating temperature : 300 C -Content : 38,5 / 400 L -Minimum volume flow : 6 -Operating voltage : 400 Volt -Control voltage : 230 Volt -Connected load : 4.6 kW -Rated current 8.5 A -Year of construction 2002

DYNAJET 500me/30 basic - 400V/50Hz pressure washer INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! Welcome to the compact me-Class with a particularly high flow rate! In contrast to its smaller colleague DYNAJET 500me, the more powerful DYNAJET 500me 30 basic with up to 500 bar working pressure achieves a flow rate of 30 l/min (1800 l/h) for particularly demanding tasks. Of course, the DYNAJET 500me 30 basic convinces not only with its high performance, but above all with its compact dimensions and high mobility. Construction - Robust, powder-coated steel frame for optimum machine protection and long service life - High durability due to screw connections made of stainless material - Crane eyelet for easy transport and handling - Splash w ...

- Designed to make any type of dough or sauce that requires quick or even cooking, or to work without temperature. - Manufacturer: INHOSPAN - Year: 02/2023 - Capacity: 100 L - Total power: 13.5 kW - Engine power: 1.5 kW - Voltage: 380 / 400 V three-phase - Frequency: 50 Hz - Dimensions (L x W x H): 740 x 1020 x 1730 mm - Variable speed drive - Digital Viewer Description:  - Designed and manufactured for various uses such as the preparation of croquettes, béchamel, sauces, custard, jams, syrups, etc. - Double-bodied stainless steel cauldron, cooking and heating. - Heating by stainless steel shielded electric resistors immersed in thermal oil, allowing uniform and homogeneous cooking. - 3 working positions: preparing-cooking (with the use of shovels), filling or cleaning and emptying (with removal of the shovels). - Stripping scoop with Teflon scrapers, preventing the p ...

LABELED PERFORMANCE PACKAGE MEASURES 25/100 packages per minute (depending on package size). Length: 60mm minimum, up to 540mm Width: 40mm minimum – up to 290mm maximum. Height: 1mm minimum – up to 250mm maximum PACKAGE WEIGHT THERMAL PRINT HEAD PRINTER TICKET STICKING HEAD COMPRESSED AIR SUPPLY UNITS 20g up to 6000gr. RESOLUTION 7.5 POINTS Thermal Printer By vacuum blowing Kg, g, lb, pieces. 6 bar, minimum 230 l/minute free of oil and water. OPERATING TEMPERATURE ROLL DIMENSIONS LABEL DIMENSIONS DEGREE OF PROTECTION 0ºC to 40ºC standby up to -10ºC Core diameter (joint): 76mm. Outer diameter: 300mm. Roll width: 22.50mm – up to 122.5mm maximum. WIDTH MIN:30MM- MAX 100MM HEIGHT MIN: 30MM -MAX 100MM DISTANCE BETWEEN LABELS: MIN 2MM-20MM DIN 40050, IP65 (Display and keyboard) CONTROL CABINET AND LABELLING SCALE MANUFACTURE OF THE MACHINE EXTERNAL DIMENSIONS IP54 LOCATION. IP20 Full  ...

CNC - Sheet Metal Parts - Roll Straightening Machine for plane straightening and relaxing of thermally cut sheet metal parts, for stamped parts, for sheet metal parts that have been cut to size with the sheet shear. Our roller straightening machine is a purely electric machine, not hydraulics, the electronically controlled servo motors enable automatic CNC – controlled face straightening in the continuous process. CNC – controlled precision sheet metal parts roll straightening machine for sheets from 0.7 mm to a maximum of 14 mm sheet thickness at 500 mm sheet width Largest sheet width 1,500 mm Guideline power over the full width - - Steel sheet quality SR235 from 0.7 mm to 10 mm - Stainless steel sheet from 1 mm to 6 mm Planning by - 19 piece straightening rollers with Ø 50 mm 21 pieces of intermediate rollers with Ø 30 mm 13 pieces of support roller sets with ...

CNC - Sheet Metal Parts - Roll Straightening Machine for plane straightening and relaxing of thermally cut sheet metal parts, for stamped parts, for sheet metal parts that have been cut to size with the sheet shear. Our roller straightening machine is a purely electric machine, not hydraulics, the electronically controlled servo motors enable automatic CNC – controlled face straightening in the continuous process. CNC – controlled precision sheet metal parts roll straightening machine for sheets from 0.7 mm to a maximum of 14 mm sheet thickness at 500 mm sheet width Largest sheet width 1,500 mm Guideline power over the full width - - Steel sheet quality SR235 from 0.7 mm to 10 mm - Stainless steel sheet from 1 mm to 6 mm Planning by - 19 piece straightening rollers with Ø 50 mm 21 pieces of intermediate rollers with Ø 30 mm 13 pieces of support roller sets with ...

4 up Thermal CTP Agfa CTP (Thermal) Model: Acento-S Built: 2006 size 660 x 830 mm Min. size 324 x 370 mm Autoloader Inline punch Stacker Chemical free Include Rip (Apogee 8) + Software Price: on request

Operating hours: 1,265 h 20 packs/min Standard basic equipment - KV 600 HP online Direction of movement of the packaging line from left to right; Right-hand side Inlet and outlet belt belt, built-in: - for the automatic transfer of goods in line - Equipped with separately switched drive motors - If required, with laterally adjustable guides Film roll holder for top and bottom film: - Motor-driven support bearing block - Max. film roll diameter: 250 mm - Controlled film take-off - Centrally adjustable side guides of the film rolls Permanently heated transverse welding system: - working pneumatically; Air consumption approx. 140 NL/min. at 6 bar, dry and oil-free Machine: - Siemens S7; Simatic Touch Panel - Display of operator information, machine status and error messages - 2-fold piece counter; Hour meter Control panel - Control console for convenient set-up - Co ...

1. HEAT CLEANING OVEN Cycle time : 2 - 4 hours Loading : Trolley, manual loading from the door side INTERNAL USEFUL DIMENSIONS Length : 1.870 mm Width : 1.460 mm Height : 1.500 mm (gross) 1.000 mm (net) Interior volume : 4,1 m³ Insulation : Ceramic wool + Rock wool Insulation thickness : 175 mm Maximum temperature : 1.260˚C Heating type : Direct heated Heating source : Natural Gas, LPG or Diesel Combustion chambers : 2 sets Burner capacity : 2 x 350.000 kcal/h Burner : RIELLO (Italy) Overheating control : Stainless steel water spray nozzles – 2 pc Safety control : Stainless steel water spray nozzles –4 pc Oven safety door : 1 set Electrical panel : PLC controlled, Schneider Electric branded switchgear components Control system : Touch screened panel and software system MATERIAL Oven body : Structural steel and sheet metal, spray pa ...

Dishwasher, thermal disinfector, disinfector, laboratory dishwasher, 130 kg, comes from a school, price ex works

CITIZEN CINCOM A20 VIPL CNC lathe built in 2006 ensures the highest precision and efficiency in the production process. During machining, the specially designed bed with its rigid structure and high thermal stability effectively reduces the heat impact, resulting in increased machine life and reliability. All of this, combined with a modular design with a reduced number of parts, makes the CINCOM A20 VIPL CNC lathe ideal for various types of production. Workpieces with a maximum diameter of 20 mm and a length of 135 mm are machined in 7 axes by a powerful main spindle which is synchronised with an AC motor, forming an electrospindle. A bushing driven by a separate AC motor is also synchronised with the machine’s main spindle. The operator’s panel consists of an intuitive FANUC 32i CNC controller, a memory card slot and an electronic wheel located next to the monitor designed to ch ...

Complete MTU E3042Z6 Combined Heat and Power Natural Gas Generating Set CHP With Acoustic Canopy. Ready to run, turnkey low-hour CHP generating set with acoustic canopy. New exchange block was installed 10,000 hours ago (total hours for set 30,000). Engine is in great condition and available for immediate delivery. Make and Model: MTU E3042Z6 Hours: 10,000 Year: 2017 Capacity: Electric Power 390 kW Thermal Power 490 kW Heating water inlet / outlet 70 / 90 C Fuel: Natural Gas Voltage: 400 HZ: 50 Scope of supply: Engine, Alternator (Leroy Somer), Base Frame, Control Panel, Gas line, Piping, Pumps, Exhaust, Intercooler, Cabling from control panel to alternator, Acoustic Canopy, Documentation.

Dishwasher, thermal disinfector, disinfector, laboratory dishwasher, comes from a school company, price ex works

TECHNICAL DATA SHEET CNC – Travelling column milling machine Make PARPAS Type SHARK One Control HEIDENHAIN iTNC 530 HSCI Year of construction 2016 Travel Longitudinal movement (X-axis) 3,500 mm Transverse movement (Y-axis) 1,083 mm Vertical movement (Z-axis) 1,074 mm Clamping table Clamping surface 4,000 x 1,000 mm Threaded holes with fitting seat Feeds X-, Y- and Z-axis, infinitely variable 2 - 30,000 mm/min. Rapid traverses in X / Y / Z 30 m/min feed force of the axes 10,000 N 2-axis milling head 2-axis milling head TUB-E92 with drive viaTorque motors for 5-axis simultaneous machining Power at 100 % ED 29 kW Speed range, infinitely variable 0-18,000 min-1 torque 92 Nm Rotational speed axis A/C 60 min-1 Tool holder HSK 63A – DIN 69893 Clamping force A-, C-axis 2,300/4,000 Nm Automatic tool changer ATC Tool stations 30 places  ...

Due to project abandonment, I offer here my Twin Heat wood chip heater, it is built in 2010 I bought the heater myself 3 years ago, disassembled, cleaned and replaced and reassembled defective parts It is mounted on a sturdy steel plate and can be moved with a forklift Originally, I wanted to use it as a hall heating system and install it in a shipping container There are a lot of new parts installed, such as valves, expansion vessels, bearings, rotary wheel blades, thermal drainage protection and a lot of small stuff You can either burn solid fuel or wood chips, but it has a huge combustion chamber The rotary valve is completely re-lined with sheet metal and welded and re-mounted The wood chip burner has been cleaned and resealed, extinguishing system has been provided with new hoses I had the system briefly test runs with water to test it, everything worked You can remove the  ...

New industry-standard hotbox for up to 400 bar and up to 28 litres per minute. EQUIPMENT - Epoxy coated steel frame with stainless steel cover - 4-wheel chassis with solid rubber tyres - Connection hose 1,5m - Water inlet temperature max. 60° - Heating capacity approx. 90 kW - Water outlet temperature in the steam range up to max. 140°C - With thermal switch and flow monitor Diesel tank: 20L Power supply: 1x 230V Dimensions: (L x W x H): 700mm x 570mm x 800mm Weight: 65kg Shipping possible. Errors and prior sale excepted. We refer to our terms and conditions.

Used twin-screw, parallel, counter-rotating extruder by Amut model BA92 NOMAX. New 2011. Output: 270 - 370 kg/h Hours of operation: 53638 h Other details: - Diameter of augers 92 mm - L/D ratio 28:1 - Drive power 60 kW (400V, 50 Hz, 3 ph) AC - Two sets of screws -for ABS processing -for PVC processing - Number of cylinder heating zones 7 - Number of cylinder cooling zones (air) 4 - Number of heating zones for head and adaptor 5 + 1 - Built-in pressure and temperature measurement system for plastic mass - Thermal oil unit for thermostating the worms for PVC - Drive power of vacuum degassing pump 11 kW - Drive power of screw feeder 1.5 kW - Without control (subassemblies available according to the list)

New industry-standard hotbox for up to 300 bar and up to 28 litres per minute. EQUIPMENT - Epoxy coated steel frame with stainless steel cover - 4-wheel chassis with solid rubber tyres - Connection hose 1,5m - Water inlet temperature max. 60° - Heating capacity approx. 90 kW - Water outlet temperature in the steam range up to max. 140°C - With thermal switch and flow monitor Diesel tank: 20L Power supply: 1x 230V Dimensions: (L x W x H): 700mm x 570mm x 800mm Weight: 65kg Shipping possible. Errors and prior sale excepted. We refer to our terms and conditions.

plasma cutting 3000x1500 mm - steel thickness max 2 mm with 1 new Thermal Dynamics generator of 6 months

New hotbox in the industry standard for max. 200 bar and up to 28 liters per minute. EQUIPMENT - Epoxy coated steel frame with stainless steel cover - 4-wheel chassis with solid rubber tyres - Connection hose 1,5m - Water inlet temperature max. 60° - Heating capacity approx. 90 kW - Water outlet temperature in the steam range up to max. 140°C - With thermal switch and flow monitor Diesel tank: 20L Power supply: 1x 230V Dimensions: (L x W x H): 700mm x 570mm x 800mm Weight: 65kg Shipping possible. Errors and prior sale excepted. We refer to our terms and conditions.

Thermal/thermal transfer printer for printing labels Print speed (max): 305 mm/s (12ips) Mounted on a stand Possibility of attaching to the production line with adjustable height and angle of inclination. The label is applied by blowing the label onto the packaging after triggering with a photocell.

pressure: 200 t chamfer lenght: 3100 mm distance between columns: 2780 mm Control: Addcobend Infinitron total power requirement: kW weight of the machine ca.: 18 t dimensions of the machine ca.: m CNC control: Addcobend Infinitron Press force: 2000 KN Bending length: 3100 mm Distance between columns 2780 mm Clear distance between columns 2780 mm Projection of the stands 300 mm Back gauge - adjustable 1600 mm Stroke max. 400 mm Space required length 4300 mm Space requirement width 2650 mm Total height 3800mm Total weight about 18000 kg Machine hours 2011: 21226 h Machine hours today: approx. 23000-25000h Retrofit: 2011: approx. CHF 86,000 • Basic remodeling • Exchange Axodyn controller units (X & M axis) • Replacement of control relays and Telemecanique PLCs with safety PLCs • Replacement of power relays and thermal overcurrent trips • Double foot switch with additional functi ...

I offer a mercury analyzer for sample analysis: - liquid (tin chloride reduction method), - solids (thermal method). Detection method: non-dispersive, double-beam atomic absorption system with generation of cold mercury vapor. Detection limit: 0.002ng Measuring range: 0 - 1000ng.

GeneralTurning Center; Control: Control M730UM CharacteristicsMax machining diameter366 mmDimensions (L x W x H)3,84 x 2,36 x 1,80 mDrive power tool spindle7,5/5,3/3,7 kWDrive power main spindle22/11 kWRapid feed X / Z30/30 m/minInput precision of C-axis on Mainspindle0,001 degreeMovements X / Z250/1143 mmRotary tool spindle speed6000 rpmNumber of tool stations12 Speed max.4500 rpmBar diameter max.65 mmSpindle bore73 mmSwing- Ø, max.760 mmMax. Turning Length1085 mmWeight approx.6500 KgSLIMlineSLIMline DMG MORI operating system equipped with MAPPS. The large 15-inch display can reduce the number of switching of the screen as it provides the four-way split screen and allows user to see more information at once. It is also possible to customi(Spindle 1) 22/15/11 kW,4,500 min-1 (Standard)(Spindle 1) Standard Spindle 22/15/11 kW (30/20/15 HP), 4,500 min-1 The ALX2000 adopts a highly reliable ...

GeneralMilling Specification; Control: Control M730UM with CELOS CharacteristicsMax machining diameter278 mmDimensions (L x W x H)2,82 x 2,09 x 2,15 mDrive power tool spindle5,5/5,5/3,7 kWDrive power main spindle11/15/15 kWRapid feed X / Z30/30 m/minInput precision of C-axis on Mainspindle0,001 degreeMovements X / Z260/590 mmRotary tool spindle speed10000 rpmNumber of tool stations12 Speed max.6000 rpmBar diameter max.52 mmSwing- Ø, max.755 mmMax. Turning Length192 mmWeight approx.4900 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and pHigh-output spindle (Left Spindle) 15/ 11 kW, 6,000 min-1(Left Spindle) High-Output Spindle 15/11 kW (20/15 HP), 6,000 min-1 The NLX ...

Rack trolley for Heuft Daub thermal oil furnaces for 100cm sheets -Stainless steel rack trolley stove trolley for Daub RDTO Heuft VTR -10 Etagig -for sheets 58x98cm and 60x100cm -2 pieces available in stock -External dimensions: 106.5 x 65cm and 192cm high -Internal width: 101,5x 60cm

GeneralCNC Turning Centre with C axis and tool drive; Control: Control M730UM with CELOS CharacteristicsMax machining diameter356 mmDimensions (L x W x H)2,82 x 2,09 x 2,15 mDrive power tool spindle5,5/5,5/3,7 kWDrive power main spindle15/22/22 kWRapid feed X / Z30/30 m/minInput precision of C-axis on Mainspindle0,001 degreeMovements X / Z260/590 mmRotary tool spindle speed10000 rpmNumber of tool stations12 Speed max.-5000 rpmBar diameter max.65 mmSwing- Ø, max.755 mmMax. Turning Length510 mmWeight approx.5000 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and pHigh-output spindle (spindle 1) 22/ 15 kW, 5,000 min-1The NLX 2000 adopts a highly reliable main spindle de ...

Portal straightening press with 400 T capacity Oil-hydraulic double column press a) No-load and pressing speed up to 17 mm/sec b) Opening speed up to 60 mm/sec c) Table size 6000x3000mm d) Open height 1500 mm e) Total size approx. LBH 6000 x 5000 x 4500 mm f) OIL temperature display on the tank g) Lubrication via lubrication nipples h) table in grid construction, i) Operation on swivel arm, mounted on the bridge j) Pressure setting from 60 T to 400 T via MONITOR k) Bridge moves through two geared motors, over racks l) Cylinder moves to the left and right over racks m) Machine body powder-coated, or double-painted n) T-grooves according to customer requirements o) Cylinder induction hardened PORTAL PRESS Thermally neutral 80 – 120 °C Number of operating pages 3 pages Forces Pressing force max. 4000 kN Free tearing force ...

Thermo oil boiler Heuft HK 140 Year: 2009 Thermal oil boiler Heuft HK 140 - with oil burner - Heating capacity 140 kW - zul. Operating overpressure 10 bar - zul. Operating temperature -10 / 300 C - Content volume 74 L - Minimum volume flow 6 - Operating voltage 400 V 50 Hz - Control voltage 230 V 24V - Connected load 5 kW -Year of construction 2009 Rated current 11 A

Hazar Makina HM624 Transfer Printer Year of construction 2021 Model 600 Print width: 1800 mm Calender cylinder diameter: 625 mm Electrical power: 40 kW. Electrical power in one hour: 18 kW Heating system: Fuel oil (surface heat distribution is even.) Machine control panel: 7 inch LCD PLC system Cooling System: Automatic Resistance power: 30 kW Engine power: 2.2 kW Heat-up time: 70 minutes Sealing clamping and guiding system: Automatic (Pneumatically controlled linear slide) Thermal control of the cylinder: Outer and inner surface checked twice automatically. Print speed: 3-7 meters in minutes Felt: Nomex Condition : Exhibit You can find more printers in other sizes - new and used - in our shop! International shipping costs on request!

Floor oven Heuft BTO 21623 Thermal oil - Heuft shared oven - Model BTO 21623 - with 5 floors - of which 2 pull-out stoves - Floor width 120cm - Floor depth: 160cm - with exhaust hood including fan - Total baking area approx. 10sqm

PLC – controlled (touch screen) multifunctional press with multiple functions Firstly, our multi-function press is a vacuum press, three-dimensional film deformation with or without membrane. Vacuum chamber size 2,340 x 1,340 mm Maximum workpiece height 60 mm Equipped with a vacuum diaphragm at the top and bottom. The press is equipped with a powerful vacuum system and a vacuum tank, which guarantees a constant and uniform supply of vacuum to the working chamber. Drive power vacuum pump 4.5 kW Vacuum tank volume 500 liters Vacuum pump flow rate 100 m³/hour Two pieces of air heat exchanger, each with a heating capacity of 3 kW. Secondly, our multi-function press is a hydraulic plate press with ten pieces of press cylinder and 200 tons pressing force – Suitable for different applications - - Cold and hot pressing - Single-sided and double-sided veneer pressing ...

Publisher's Description The machines of the new UC series (Meisterstück) from Winterhalter are state-of-the-art and set standards in terms of washing results. The one-button operation is equipped with color coding that informs the user of the condition. A progress indicator is also integrated into the display. The smart Winterhalter touch display offers three washing programs to choose from (cutlery washer has only one washing program). These can be customized. The programs are displayed in a language-neutral manner, thanks to self-explanatory images of the washware. This guarantees intuitive, error-free operation. Furthermore, additional programs such as short, energy-saving, whisper and intensive programs are available in all machine models and are easy to activate. Thanks to a large number of technical innovations, Winterhalter has succeeded in achieving washing results of u ...

The iCombi Pro is the latest combi steamer from RATIONAL. The iCombi Pro 20-1/1 Electric model with 20 shelves GN 1/1 New is easy to use, even for unskilled personnel, as you can achieve outstanding food quality without the need for supervision. The super-fast intermediate and self-cleaning keep your device squeaky clean. It is a young used combi steamer from 01/2023. The RRP is € 25,520 net Availability: available directly from stock in week 09/2024 The indicated price is gross incl. 19% VAT. Service: We would be happy to provide you with a certified Rational customer service from master craftsmen, within a radius of approx. 100 kilometres from our location (postal code: 35418) Are you looking for a specific type of Rational device? Ask us, we have access to an extensive range of used and new goods. We will be happy to advise you on all types of devices, whether S ...

CharacteristicsSwing- Ø, max.450 mmWeight approx.10000 KgDrive power milling spindle9,5/5,5 kWDrive power main spindle15/11 kWDrive power second spindle15/11 kWNumber of Toolmagazine positions38 Speed max.12000 rpmSlewability of B-Axis+/-120 degreeMovements X / Z / Y455/800/+-105 mmMilling spindle upper side1 Input precision of C-axis on Counterspindle0,001 degreeSpindle speed 2nd Spindle max.6000 rpmInput precision of C-axis on Mainspindle0,001 degreeBar diametre52 mmSpeed max.6000 rpmMax. Turning Length800 mmMax machining diameter430 mmDimensions (L x W x H)4,17 x 2,5 x 2,5 (4,55 x 2,5 x 2,5) mGeneralTurning-milling centre SZM: Tool spindle, Spindle 1, Spindle 2 and Turret 2 (Milling); Control: CELOS - ERGOline Spindle 1 hobbing functionSpindle 1 hobbing function Gear machining or spline machining is possible by synchronizing the rotary tool spindle rotation on turret 1 with the spind ...

Fiorini storage tank 1000 liters VKB 2.0 - 1000L 4" Storage tank 1000 litres, type VKB 2.0 - 1000L 4" • Cold water tank It is made of painted carbon steel sheet and insulated by closed-cell elastomer foam. This thermal insulation offers optimal resistance to condensation. • Charge valve As a result, the hydraulic circuit can be filled both during peak demand and during normal operation. •Safety valve The valve is set to 6 bar. By means of a channelled drain, it protects the module from overpressure. • Automatic air separator It is located on the upper part of the module and vents the air present in the module. • Drainage valve This drains the water from the deepest point of the reservoir to allow it to be emptied. •Case The base is made of thick lacquered sheet steel. The external panels are made of galvanized and painted sheet steel and are highly weather-resist ...

Standard equipment - Thread cutting device - Control panel with OLED display - robust, high-quality drill head hood - LED lighting - quickly adjustable and ergonomic drilling depth stop - infinitely variable speed control via rotary knob - thermal overload protection - Spindle stop - Drilling protection with electr. Hedge - Connection cable with CEE plug - mechanical feed of the Z-axis - incl. electromagnetic coupling for 3 feed speeds - Drill cross with push button - in thread cutting mode: right-left SPECIFICATIONS Continuous/normal drilling performance (mm) R1 - 27/32 (in E335/ST60) (100) R2 - 25/30 (in E335/ST60) (70) R3 - 30/35 (in E335/ST60) (200) Thread cutting capacity max.: R1= M24x3, R2= M20x2.5, R3= M30x3.5 Spindle MK III Drilling depth: 125 mm Projection: 300 mm Column diameter: 125 mm Usable table surface (W x D): 590 x 450 mm Speed display digit ...

32mm x 2mm Oto Mills HF Tube Mill Make: Oto Mills Year New: 2002 Tube Diameter 10mm – 32mm Wall Thickness: 0.7mm – 2mm Speed: 180 mpm Direction: R-L Coil Weight: 3 ton Entry Coil Car Mandrel Uncoiler Automatic End Joiner Vertical Accumulator Coil Straightener Forming Mill with 50Kw Motor & Drive Finn Passes with 35Kw Motor and Drive 300Kw Thermatool HF Welder Cooling Section Sizing Mill with 50Kw Motor & Drive Turk Head Stands Flying Cut-Off Saw Run Out Conveyor and End Table Tooling for Round and Profiles Electrics, Hydraulics, Controls