the full tetra used for sale

3x Full HD 27 inch Monitor TERRA 2756W, 1x DVI, 1x HDMI, 1x Displayport, without cable, Attention: The goods are issued/handed over ON the loading ramp! A vehicle with a lifting platform or a vehicle with a pallet truck is required for collection (trucks with max. 7.5t - larger / longer trucks may touch down!). For all other vehicles, you need enough strong people or appropriate ramps to lift / transport / load the goods from the loading ramp!

3x Full HD 27 inch Monitor TERRA 2756W, 1x DVI, 1x HDMI, 1x Displayport, without cable, Attention: The goods are issued/handed over ON the loading ramp! A vehicle with a lifting platform or a vehicle with a pallet truck is required for collection (trucks with max. 7.5t - larger / longer trucks may touch down!). For all other vehicles, you need enough strong people or appropriate ramps to lift / transport / load the goods from the loading ramp!

3x Full HD 27 inch Monitor TERRA 2756W, 1x DVI, 1x HDMI, 1x Displayport, without cable, Attention: The goods are issued/handed over ON the loading ramp! A vehicle with a lifting platform or a vehicle with a pallet truck is required for collection (trucks with max. 7.5t - larger / longer trucks may touch down!). For all other vehicles, you need enough strong people or appropriate ramps to lift / transport / load the goods from the loading ramp!

3x Full HD 27 inch Monitor TERRA 2756W, 1x DVI, 1x HDMI, 1x Displayport, without cable, Attention: The goods are issued/handed over ON the loading ramp! A vehicle with a lifting platform or a vehicle with a pallet truck is required for collection (trucks with max. 7.5t - larger / longer trucks may touch down!). For all other vehicles, you need enough strong people or appropriate ramps to lift / transport / load the goods from the loading ramp!

Full HD 24 inch Monitor FUJITSU B24-8 TS Pro, 1 x DVI, 1x VGA, 1x HDMI, without cable, Attention: The goods are issued/handed over ON the loading ramp! A vehicle with a lifting platform or a vehicle with a pallet truck is required for collection (trucks with max. 7.5t - larger / longer trucks may touch down!). For all other vehicles, you need enough strong people or appropriate ramps to lift / transport / load the goods from the loading ramp!

Full HD 24 inch Monitor FUJITSU B24-8 TS Pro, 1 x DVI, 1x VGA, 1x HDMI, without cable, Attention: The goods are issued/handed over ON the loading ramp! A vehicle with a lifting platform or a vehicle with a pallet truck is required for collection (trucks with max. 7.5t - larger / longer trucks may touch down!). For all other vehicles, you need enough strong people or appropriate ramps to lift / transport / load the goods from the loading ramp!

Full HD 24 inch Monitor FUJITSU B24-8 TS Pro, 1 x DVI, 1x VGA, 1x HDMI, without cable, Attention: The goods are issued/handed over ON the loading ramp! A vehicle with a lifting platform or a vehicle with a pallet truck is required for collection (trucks with max. 7.5t - larger / longer trucks may touch down!). For all other vehicles, you need enough strong people or appropriate ramps to lift / transport / load the goods from the loading ramp!

Full HD 24 inch Monitor FUJITSU B24-8 TS Pro, 1 x DVI, 1x VGA, 1x HDMI, without cable, Attention: The goods are issued/handed over ON the loading ramp! A vehicle with a lifting platform or a vehicle with a pallet truck is required for collection (trucks with max. 7.5t - larger / longer trucks may touch down!). For all other vehicles, you need enough strong people or appropriate ramps to lift / transport / load the goods from the loading ramp!

Full HD 24 inch Monitor FUJITSU B24-8 TS Pro, 1 x DVI, 1x VGA, 1x HDMI, without cable, Attention: The goods are issued/handed over ON the loading ramp! A vehicle with a lifting platform or a vehicle with a pallet truck is required for collection (trucks with max. 7.5t - larger / longer trucks may touch down!). For all other vehicles, you need enough strong people or appropriate ramps to lift / transport / load the goods from the loading ramp!

Full HD 24 inch Monitor FUJITSU B24-8 TS Pro, 1 x DVI, 1x VGA, 1x HDMI, without cable, Attention: The goods are issued/handed over ON the loading ramp! A vehicle with a lifting platform or a vehicle with a pallet truck is required for collection (trucks with max. 7.5t - larger / longer trucks may touch down!). For all other vehicles, you need enough strong people or appropriate ramps to lift / transport / load the goods from the loading ramp!

Full HD 24 inch Monitor FUJITSU B24-8 TS Pro, 1 x DVI, 1x VGA, 1x HDMI, without cable, Attention: The goods are issued/handed over ON the loading ramp! A vehicle with a lifting platform or a vehicle with a pallet truck is required for collection (trucks with max. 7.5t - larger / longer trucks may touch down!). For all other vehicles, you need enough strong people or appropriate ramps to lift / transport / load the goods from the loading ramp!

Full HD 24 inch Monitor FUJITSU B24-8 TS Pro, 1 x DVI, 1x VGA, 1x HDMI, without cable, Attention: The goods are issued/handed over ON the loading ramp! A vehicle with a lifting platform or a vehicle with a pallet truck is required for collection (trucks with max. 7.5t - larger / longer trucks may touch down!). For all other vehicles, you need enough strong people or appropriate ramps to lift / transport / load the goods from the loading ramp!

Full HD 24 inch Monitor FUJITSU B24-8 TS Pro, 1 x DVI, 1x VGA, 1x HDMI, without cable, Attention: The goods are issued/handed over ON the loading ramp! A vehicle with a lifting platform or a vehicle with a pallet truck is required for collection (trucks with max. 7.5t - larger / longer trucks may touch down!). For all other vehicles, you need enough strong people or appropriate ramps to lift / transport / load the goods from the loading ramp!

Full HD 24 inch Monitor FUJITSU B24-8 TS Pro, 1 x DVI, 1x VGA, 1x HDMI, without cable, Attention: The goods are issued/handed over ON the loading ramp! A vehicle with a lifting platform or a vehicle with a pallet truck is required for collection (trucks with max. 7.5t - larger / longer trucks may touch down!). For all other vehicles, you need enough strong people or appropriate ramps to lift / transport / load the goods from the loading ramp!

Full HD 24 inch Monitor FUJITSU B24-8 TS Pro, 1 x DVI, 1x VGA, 1x HDMI, without cable, Attention: The goods are issued/handed over ON the loading ramp! A vehicle with a lifting platform or a vehicle with a pallet truck is required for collection (trucks with max. 7.5t - larger / longer trucks may touch down!). For all other vehicles, you need enough strong people or appropriate ramps to lift / transport / load the goods from the loading ramp!

Full HD 24 inch Monitor FUJITSU B24-8 TS Pro, 1 x DVI, 1x VGA, 1x HDMI, without cable, Attention: The goods are issued/handed over ON the loading ramp! A vehicle with a lifting platform or a vehicle with a pallet truck is required for collection (trucks with max. 7.5t - larger / longer trucks may touch down!). For all other vehicles, you need enough strong people or appropriate ramps to lift / transport / load the goods from the loading ramp!

Machine dimensions: approx. 2700 x 1800 x 2100 mm Maximum packing height: approx. 1800 mm Base diameter: approx. 1650 mm Warning: the information reported has been taken on board the machine using measuring instruments and may not correspond to the actual performance. For further information, on-site inspection is suggested. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-45448-707

Vehicle data Manufacturer: Manitou Type: MLA 5-50 H P ST5 S1 Type: Farm loader Drive type: Diesel Year of manufacture: 2023 Hours: 34 Length: 4490 mm Overall width: 1330 mm Net weight: 3650 kg Mast data Overall height: 2290 mm Engine < Drive: PERKINS 403J-E17T Description & Optional Equipment Front Tyre: Air Front Tire Size: 31 x 15.5 - 15 Front Tire Condition: 80 - 100% Rear Tires: Air Rear Tire Size: 31 x 15.5 - 15 Rear Tire Condition: 80 - 100% Tech. Condition: New Optical Condition: New Facilities Attachments: - Bulk material bucket Attachments: MANITOU Ground Shovel 1500 mm, 0.51 cbm, 4-point hook, BJ 2023 MANITOU Fork carriage with forks, CAT920/1200, 4-point hook, BJ 2023 Special equipment: - Rear work lights - Front work lights - Heating - Full cabin - CE certificate Auction-ID: 04F-SAW-2

Offered is a WrapAroundPacker 420 / Combiline. Application area: Packaging of individual containers, Cycle rate max: 50cycles/minute, Format flexibility: 0.33l, 0.5l, Preserving jars, Adhesive system: Spot or line hot melt application system, Inspection by appointment possible.

High-quality soft leather with high density, SL-track design where the massage rollers treat neck, back, waist and hips, 16 automatic modes + 4 manual modes, manual options for full-body massage / partial massage / point massage, full-body airbag massage with 1–3 intensity levels, massage intensity adjustable (1–3 levels), waist heating, foot-roller massage, timer setting (10–30 minutes), child lock function, LCD screen, shoulder position detection, Bluetooth, zero-gravity adjustment (2 levels), Calf massage + calf roller, phone holder, quick buttons on the armrest, phone wireless charging, packaging size 12876117CM, weight including packaging 87KG, New in box. Auction-ID: A1-40104-157

Vehicle data Manufacturer: Toyota Type: 8FBMT25 Type: Electric 4 Wheel Forklift Drive type: Electric Load capacity: 2500 kg Year of Make: 2017 Hours: 8732 Length: 2429 mm Overall width: 1195 mm Net weight: 4809 kg ISO class: ISO class 2 = 1,000 - 2,500 kg Mast data Mast Type: Duplex Lifting height: 4500 mm Overall height: 3085 mm Free lift: 120 mm Fork length: 1200 mm Fork width: 100 mm Fork thickness: 40 mm Fork carriage: 1070 mm Motor, Battery & Charger Battery: Hawker, 2022, 80V, 700Ah, 40 - 60% Description & Optional Equipment Front tyres: Superelastic Front Tire Size: 23x9-10 Front Tire Condition: 80 - 100% Rear tires: Superelastic Rear tire size: 18x7-8 Rear Tire Condition: 80 - 100% Tech. Condition: good Optical condition: good Facilities Attachments: - Sideshift Special equipment: - 3rd valve - 4th valve - Rear work lights - Front work li ...

John Deere X948 Municipal Tractor • Year of construction 2022 • Only 18 hours of operation • Yanmar 3TNM74F 3-cyl. Diesel • 17.6 kW / 24 hp • All-wheel drive (4WD) • Hydrostatic transmission • Liquid-cooled industrial motor Special features: • Front linkage (power center) • Front PTO • 2 double-acting front hydraulic valves • Quick-Hitch quick-change system • Professional municipal design • High-quality front mounting plate • Robust frame construction • Very neat overall condition Attachments included: • John Deere 52\" Quick-Hitch Broom • Front snow blade • Hydraulic rear tipper • Heba Type 2518 HA • Year of construction 2023 • Permissible total weight 1,000 kg • Stand-alone hydraulic unit Highlights: • Complete year-round municipal package • Winter service and cleaning operation poss ...

Daub baking master 22.5 m and 178 stove is a state in TOP general and thorough outdated. functions as anew. anew steam apparatus. anew elektrik anew hearthstones incl. Daub Thermooel-boiler arrangement sales incl. cargo and assembly on inquiry I also have to sell other uberholt DAUB oven THERMO-OEL price on inquiry contact: + 48 692 345 660 anbox.pl

Daub Backmeister 18m² Furnace is in TOP condition, General and thorough overhaul. Works like new. New steam apparatus. New electrics New cooking hobs incl. Daub thermal oil boiler system Sale incl. freight and assembly on request I also have to sell other overholt DAUB oven THERMO-OEL Price on request Contact: +48 692 345 660 anbox.pl

Stove is in excellent condition, General and thorough overhauled. Works like new. New steam apparatus. New electrics New stove incl. daub thermal oil boiler plant Sales including freight and installation upon request I also have to sell other uberholt DAUB oven THERMO oil Price on request

Thermal store / buffertank with a nominal capacity of 40,000 litres on 2 steel bases. Contents: approx. 40 m³ / 40,000 litres Material: steel Diameter with insulation: 2.75 m Diameter without insulation: approx. 2,50 m Year built: approx 2007 Buffer in cylindrical shape. Insulated by mineral/glass fibres, 10cm thick. Panels are made of aluminium sheets. The container is in used state, and has been drained and cleaned professionally. The heat storage tank has a separate connection pair (forward / reverse) for the heat supply (E.g. from CHP, boiler) and heat extraction (e.g. from a heating network). Thus, a real buffering is possible, and a temporary extraction higher than the thermal power of the heat generator, eg. to deal with heat peaks. Optionally and at additional cost more pairs of connection can be installed to connect another heat generator to this buffer. Flanges  ...

Function: The Bosch TFA 241 is a thermoforming machine fills liquid products in previously defined Cup sizes. First, the railway film with H2O2 is sterilized and then heated to a predetermined temperature. This temperature is reached, the slide in the next step will be deep. After the cups got their form, these are filled with product. Then, the upper rail slide with H2O2 is sterilized. Then, the filled Cup with the top track slide are welded and punched out before they are passed on a conveyor belt of the drain. Performance: 13,500 - 31,500 cups per hour Number of runs: 5-track and longitudinal runners current format: Ø 44 mm, height 15 mm maximum Cup size: Ø 44 mm height 29 mm Prefiller: Cleaning: CIP capable Mainfiller: -for liquid products -Manufacturer: Orlita -Dosing type: cold HD -Filling volume: 8-15 cm3 Disinfection: H2O2 Date of printing: Inkjet Dimens ...

Thermostat housing MWM 2016 RECON Part number: 1227-6862 12 cylinder Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

Daub baking master 27 m² Stove is in excellent condition, General and thorough overhauled. Works like new. New steam apparatus. New electrics New stove incl. daub thermal oil boiler plant Sales including freight and installation upon request I also have to sell other uberholt DAUB oven THERMO oil Price on request Contact: + 48 692 345 660 anbox.pl

THERMISCHE REINIGUNG PYROLYSE-OFEN Zykluszeit : 2 - 4 Stunden Beschickung : Wagen, manuelle Beschickung Isolierung : Keramikwolle + Steinwolle Dicke der Isolierung : 175 mm Höchsttemperatur : 1.260˚C Heizungsart : Direkt beheizt Heizquelle: Erdgas, Flüssiggas oder Diesel Brennkammern : 2 Sätze Überhitzungskontrolle : Wassersprühdüsen - 2 Stück Sicherheitskontrolle : Wassersprühdüsen - 2 Stück Backofen-Sicherheitstür : 1 Satz Schaltschrank : PLC-gesteuert, Schaltgeräte der Marke Schneider Electric Steuerungssystem : Bedienfeld mit Touchscreen und Softwaresystem MATERIAL Ofengehäuse : Stahlkonstruktion und Blech, spritzlackiert 1. Brennkammer: Schamottestein und feuerfester Zement, 1.400˚C 2. Brennkammer: Schamottestein und feuerfester Zement, 1.260˚C BETRIEBSTEMPERATUR 1. Brennkammer: 250 - 600˚C 2. Brennkammer: 800 - 1.100˚C Durchmesser  ...

Used thermoforming roll line by Tepro, model LPP 420-30/3618. New: 2014. Machine serviced, very good condition. Technical data: Machine stroke mm 300 Forming chamber mm 282x356 Pressing depth mm max. 130 Filling field length mm 900 Distance between tools mm 1800 Efficiency cycle/min 4-12 Vacuum pump m3/h 100 Power supply V/Hz 3x230/50 Power kW ~ 13.5 Compressed air pressure bar min. 6 Cooling water consumption l/min 8-15 Compressed air consumption Nl/cycle 100-150 Width of the upper foil mm 420±1 Bottom foil width mm 420+2 Max. bottom foil thickness (soft / hard) mm 0.3 / 0.6 Max. bottom foil diameter mm 400, sleeve 76 Max. top foil diameter mm 400, sleeve 76 Weight kg ~1300

Thermostat housing MWM 2016 RECON Part number: 1227-6863 12 cylinder Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

Used thermopacking machine from Ulma, model TF-SUPRA. Year of production 2006. The machine uses two types of foil. The lower foil is plastic and, passing through the forming station under the influence of heat and stretching, takes the shape of the mold, creating a package. Once the foil has cooled, it moves to the loading area where the products are placed into the package, this function can be performed manually or automatically using special assistive devices. After filling the molds, the upper foil is placed above the mold and welded to it, it is possible to simultaneously create a vacuum in the package and fill it with protective gas. Ultimately, the cutting station separates the packages into individual or groups that leave the machine in exactly the condition in which the recipient is to receive them.

Housing Thermostat

36,000 m3 thermal oil supply system/exhaust air purification plant (special plant construction) WK, Year of construction: 2012, with heat recovery and cooling supply, The system is currently designed for two printing systems. Depending on the Machine equipment for 3 - 4 printing systems. The system consists of the following components: - 1 roof-mounted thermal post-combustion system / exhaust air purification WK Thermal Engineering Plant, boiler and apparatus construction WKTNV, year of construction: 2012, exhaust air volume at the inlet 36,000 m³/h, maximum permissible combustion chamber temperature max. 730 °C, burner type WK/H1 gas cone, Burner power 6,600 kW, fan power 200 kW, maximum permissible inlet temperature 210 °C, Maximum permissible solvent throughput 500 kg/h, natural gas heating medium, calorific value of the heating medium 32693 kJ/m³, max. heating fuel con ...

Nema NCG 4390 S Thermal Shock Chamber -40°C to +180°C Manufacturer: Nema Type: NCG 4390 S Temp. range: -40°C to +180°C Dew point range: +5 °C to +89 °C Mains voltage: 400 V Rated current: 32 A Nominal power: 15 kW Refrigerant: R 404 A Year of Make: 1999 Weight: 2720 kg External dimensions: W 3950 x D 1700 x H 2280 mm Chamber: W 3000 x D 1300 x H 1170 mm WLG DAMPF-O-MAT Electro-automatic steam humidifier and producer of mineral and odour-free steam Manufacturer: WLG DAMPF-O-MAT Type: EDB 8 Heating voltage: 400 V Power: 6 kW Steam volume: 8 kg/h Water-cooled condenser Manufacturer: Bitzer Water-cooled Mains voltage: 400 V Rated current: 13 A Nominal power: 4 kW Refrigerant: R 404 A Weight: 145 kg KK-08 More items - new and used - can be found in our shop! International shipping costs on request!

Mathis THN 10988 Laboratory Thermosal Plant Use This foulard-dryer combination has proven itself excellently in practice. It is used in this way for a wide variety of hot air treatment processes such as drying, fixing, condensing, thermo-isolating, etc This system is used wherever a certain sample size is already required, for example to produce sample collections or the like. Dryer THA If the foulard and dryer are to be used separately in addition to continuous operation, the THA type dryer should be chosen. Attached to this device are a unwinding unit at the dryer entrance and a pull-out unit at its exit. This element determines the speed of goods in individual operations. This offers the advantage of using the foulard and dryer independently and at the same time. For drying, fixing, condensing, etc., the goods are then put on the dryer. If all the previously listed ap ...

Wire rod: 0.1 - 1.3 mm section area: 5 - 70 mm power: max. 400 rpm complete with cooling unit and driven wire reel; good

Vötsch VT 7030 S2 Thermal Shock Test Chamber -80 °C to +220 °C The Vötsch VT 7030 S2 Environmental Test Chamber is designed for laboratory applications that require testing of materials and components in a familiar environment. With its versatile capabilities and easy-to-use controls, this programmable unit can be used to simulate a wide range of environmental conditions for scientific studies, product testing, and process controls. Data for temperature tests in single-chamber operation Hot Chamber: Thermal shock test chamber Test chamber 300 l Temperature range +50 °C to +220 °C Temperature deviation in time in the middle of the usable space ± 1 K Temperature deviation spatially ± 2 K Temperature gradient (according to IEC 60068-3-5) 4 K Temperature change rate (according to IEC 60068-3-5, measured in supply air) Heating 11 K/min Cold chamber: Thermal shock te ...

Working width 400mm

R1304Injection moulding machine ARBURG 270-350-90 Multronica thermoset the previous owner sold the Multronica controller for 2,500€ I wanted to convert the machine to thermoplastic. I also found a Multronica controller. There are the following options ---------------------------------------------------------------------- ----------- without control, without funnel, without thermoset device as Spare parts carrier (engine, pump, valves, cylinders, electrics, etc.) €800,-- ---------------------------------------------------------------------- ------------------- with thermoset module + replacement Multronica for assembly €1000.-- ---------------------------------------------------------------------- --------------------- with additional thermoplastic module €1200.-- ---------------------------------------------------------------------- --------------------- all prices +VA ...

Thank you for your interest on our machines, we like this may offer you: Sweet production accessories Fat / sugar thermometer in the wire frame, temperature range: + 80° C - + 220° C from stock Hess. Lichtenau

Technical data according to Muller Martini

Unwind Stand Preheater ILLIG VHW 72/ 2 ILLIG RDM 70K Thermoformer with auto-start facility Indramat Servomotor Indexing Top & Lower heaters Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Pneumatic Plug Assist, Max. Part height 125 mm Control Cabinet with Optimised Schleicher (PLC) Controls Auto Lubrication Pump. Inline ILLIG ÜG70B Counter/ Stacker, with delivery conveyor Inline Grinder

Used ILLIG RDK 54 Thermoforming Line, Age 1995 Unwind Stand Indramat Servomotor Indexing Max. Film width 610 mm max. Thickness range 0.18 to 2.5 mm. Hardened Transport Rails, Double Heating, Heating Load 41.0 kW. Heaters move forwards automatically with pneumatic control Sheet Sag Control Form Area 550 x 400 mm Forming & Punching in Mold with integrated Steel Rule Die. Positive Draw 20 mm, Negative Draw 20 to 40 mm Trimming Force 50kN. Top and Lower Platens Moved by separate Indramat Servomotors Heavy duty Toggles on both upper & Lower Platen Stacking/ Counting Station Waste Material Winder Inline ILLIG RS75b Grinder with Sound Proof Housing & Controls. Suitable for PS, OPS, PP, PE, PVC etc.

Unwind Stand Preheater ILLIG VHW 72/ 2 ILLIG RDM 70K, age 1989 Thermoformer with auto-start facility SEW Eurodrive Servomotor Indexing Max. material width 730 mm Max. Indexing length 300 mm Top & Lower heaters, total connected load top & bottom heaters 74.2 kW Drive Motor 6.93 kW Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Hydraulic Plug Assist, Max. Part height 125 mm Hydraulic Power Pack Control Cabinet with Optimised Schleicher (PLC) Controls Encoder on Main Shaft Auto Lubrication Pump. Inline ILLIG UG70b Counter/ Stacker Delivery Conveyor for Counted/ Stacked Cups with Ejector Table

Temperature sensors, resistance thermometers, thermometers, thermocouples -Thermocouple: LC-05, unused Ovp -Type: LC-05/NI-100 D DM -Number: 6x available -Price: per piece -Dimension packaging: 150/20/H20 mm -Weight: 0.1 kg/piece

Gas injection technology Bauer – 11 pcs. 2001 – 2007 year prod. Price - 1.500 Euro/pcs.

Thermal motor contactor relays, relays, heating current monitoring, preheating for generators, contactors, semiconductor contactors, contactors -60-100 A Class 10 -Weight: 0.8 kg

Thermostat, sensor -Adjustment range: -10...+12 -Weight: 0.7 kg