th fleischereimaschinen used for sale

A Theisen & Bonitz with 10 stations and HFS is offered. Format 35 X50 cm, 30 cm stacking height Pictures and further information on request.

fabric-no.: 920064 voltage: 380 V table turning speeds: 0-1,2 U/min weight of the machine ca.: 1 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Semi automatic Band Saw EISELE THOMAS HTB 350 AO CN Cutting capacity in the round: Ø 260 mm Square cutting capacity: 240 x 240 mm Maxi jaws opening: 310 mm Jaws height: 140 mm Angular cutting Auto clamping of the second vise Auto descent by hydraulic variator Automatic non-functional (machine only work in semi automatic) Voltage: 380 V Length: 2200 mm Depth: 2200 mm Total height in height position: 2000 mm Weight: approx 800 kg

It is a thermally insulated lightweight hall (built in 2008), whose hot-dip galvanized supporting structure and sandwich cladding together with various equipment can be reused. DIMENSIONS according to construction documents: Covered area: 375.00 square meters; Width of the hall: 25.00 m AK wall; Length of the hall: 15.00 m AK wall; Frame spacing: 5.00 m MM frame supports; Eaves height: 5.24 m at the intersection of roof and wall; Ridge height: 7.30 m building height; Purlin spacing: 2.50 m floor area / 2.54 m roof pitch; Wall beam spacing: 2.50 m; Roof pitch: 10 degrees, symmetrical gable roof; LOAD ASSUMPTIONS: Wind load: 0.59 kN/m2 (DIN 1055-4 March 2005). Snow load: 1.25 kN/m2 (DIN 1055-5 July 2005). Seismic zone: 3 (DIN 4149-4 April 2005). STRUCTURE: The primary structure consists of hot-rolled and hot-dip galvanized IPE solid profiles. Main f ...

From an operational resolution: Victor Thermal Dynamics Cutmaster 40mm 30-120 amps of power 120Amps at 40% ED 80Amps at 100% ED 40mm quality cut 50mm separating cut Air consumption 190l/min Serial No.MX1928048535 Hose package 6meter Torch SL 100 extra toggle switch for 4-stroke (continuous operation) installed Weight 28kg 380Volt Bn2u828m with trolley

Description: Serial no. 1.1.001811 Including: Hydraulic unit, belt filter Working range: Tip width: 1500 mm Center height: 200 mm Largest workpiece diameter: 350 mm Headstock: Speed: 25 - 500 rpm (infinitely variable) Feed rate: 0 - 3 m/min Rapid traverse: 0 - 6 m/min Cone: MK5 Oscillation frequency: 165 - 1000 DH/min Oscillation path: 1 - 6 mm Stone pressure: 0 - 100 kP Tailstock: Stroke (hydr.): 55 mm Contact pressure: 0 - 200 kP Cone: MK5 Timer pre-finishing time: 0 - 60 min Total finishing time: 0 - 60 min Compressed air required: 5 - 6 atü Approx. Onsite Dimension. (l x w x h): 4,200 x 2,600 x 2,000 mm, weight approx.: 4,500 kg

Description: Contains various milling cutters, drills and reamers Approx. Onsite Dimension. (l x w x h): 1,000 x 700 x 1,000 mm, weight approx.: 200 kg

Key data: 3000 KW, 400 V

Thermofin TDD.2-091 V-cooler, dry-cooler, dry cooler, glycol cooler., as good as new only one year in operation, super quiet, high efficient, 22fans, 13.7 x 2.4x 2.7 h, 7150kg, from 500KW to 3500KW,

10 stations 30 cm Stack Height Variable - Pre-Staple System 1 manual feeding station Vibrating Offset Delivery Theisen & Bonitz TB 304 QSM Stitching-Folding-Cutting Assemblage 3 sides bleed Segregation of requirements Special device for 6-sided envelopes Tape delivery Condition - like NEW

Thermat high pressure cleaning system, type: (2x) HRG 75, year of construction: 2016, 230 V, 1 Ph, 50 Hz, capacity: 80 kW, 156 bar, dimensions: 1300 mm x 800 mm x 2250 mm.

Option to purchase a hall ensemble of approx. 6000 m2 in total (90 x 66 x 6.3 / 8.3 m) or parts thereof. 3-span steel hall in portal construction, which will soon be dismantled. It is a thermally insulated hall, whose supporting structure and most of the cladding as well as various accessories can be reused. APPROXIMATE DIMENSIONS Covered area: approx. 6000 m²; Width of the hall: approx. 66.40 m AK wall Wingspans: approx. (15 + 15) + 15 + 21 m center-center supports; Length of the hall: approx. 90.40 m AK wall; Frame spacing: approx. 5.00 m MM truss; Eaves height: approx. 6.30 m at the intersection of roof and wall; Ridge height: approx. 8.30 m building height; STRUCTURE: The primary structure consists of hot-rolled Euro profiles (IPE and HEA / HEB). The secondary structure to support the building envelope is made of galvanized strip steel and cold-form ...

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sourdough plant with cooling Thörmer 3 piecesManufacturer : ThörmerWith control and 3 pieces AggregateFlour scales a scale Kettle 1External dimensions : Diameter 125cm Height 190cmInterior dimensions: Diameter 98cm Height 120cmKettle 2External dimensions : Diameter 98cm Height 210cmInterior dimensions: Diameter 88cm Height 122cmKettle 3External dimensions : Diameter 80cm Height 145cmInterior dimensions: Diameter 76cm Height 63cmDisassembled ready for pickupIncl, flour hopper and controlBaker condition Details see picture

Sourdough plant with cooling ThörmerManufacturer : ThörmerWith control and aggregate units Scales Kettle 1External dimensions : Diameter 105cm Height 200cmInterior dimensions: Diameter 78cm Height 82cmDisassembled ready for collectionBakery condition for details see picture

Description: Double miter band saw - Semi-automatic - Miter 45° / 60° Cutting area around 270 mm Cutting area square 260 mm Cutting area rectangle 350 x 240 Belt speed 36/72 m/min Saw blade length 2925 x 27 x 0.9 mm Total power requirement 1.9 kW Machine weight approx. 0.6 kg Dimensions LxWxH 1.9 x 1.1 x 1.75 m weight approx.: 600 kg, Approx. Onsite Dimension. (l x w x h): 1,900 x 1,100 x 1,750 mm

Description: Band saw with - swivel table - Footswitch - Machine light - IDEAL welding device Roll diameter 500 mm Projection 490 mm Workpiece height 220 mm Table size 600 x 600 mm Saw band length 3350 mm Speed infinitely variable Machine weight approx. 0.4 t Space requirement approx. 1.2 x 0.8 x 1.95 m weight approx.: 400 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,950 mm

Description: Machine no. 12461 Roller diameter: 300 mm Projection: 450 mm Table height: 480 mm Total power requirement: 2.2 kW Space requirement approx.: 1000 x 700 x 1850 mm For loading machine, height with pallet: 1200 x 800 x 2005 mm Saw for car body parts made of sheet metal, plastic etc. good accessibility of the saw band, freehand guided. Cutting speed infinitely variable up to 1000 m/min Band welding device IDEAL BS00 Saw band width max.: 10 mm, Saw band length max.: 3,350 mm, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 2,005 mm, weight approx.: 520 kg

Heating shell with heating base on grated retention tray, 200L unstirred polypropylene reactor fitted with rupture disk and thermocouple well, PID control with thermocouple. Maximum operating temperature 100°C. External dimensions of reactor: H 90cm, diameter 60cm

Large-capacity calciner (approx. 150l) T max 750°C dimensions of oven section: height 60cm, width 43cm, depth 65cm. Overall dimensions: height 243cm, width 105cm and depth 105cm. This 21KW oven (400V, 50Hz ( phases)) is equipped with an air blower and a supercalciner unit to burn combustion gases. PID control.

1 new heating shell, and 2 new unstirred 200L polypropylene reactors with thermocouple well and rupture disk, PID control with thermocouple (to be fitted). Maximum operating temperature 100°C. External dimensions of reactor: H 90cm, diameter 60cm.

Production hall hbs780s and warehouse hbs645s, which are to be dismantled in the short term. These are thermally insulated halls whose supporting structure and cladding as well as various accessories can be reused. Production hall hbs780s GFA area: approx. 780 m²; Hall width: approx. 30.00 m AK façade; Hall length: approx. 26.00 m AK façade; Frame spacing: approx. 5.60 m MM truss; Eaves height: approx. 7.75 m OK purlin; STRUCTURE: The primary structure consists of hot-rolled Euro profiles. The secondary structure to accommodate the building envelope consists of cold-formed steel profiles made of galvanized strip steel. ROOFING: Sandwich panels, grey-white, on purlins made of cold-formed and galvanised lightweight profiles. WALL COVERING: Sandwich panels and thermally insulated sheet steel cassettes on wall substructure made of cold-formed and galva ...

Manufacturer: Thermo fisher scientific Model: TSX50086V Type: Ultra low temperature freezer Year: 2019 Volume: 682 L Minimum temperature : - 86?C Inside dimensions : 73 x 71,9 x 130 cm Outside dimensions : 86,4 x 95,5 x 198,1 cm Weight : 316 Kg

Manufacturer : Th?mis Technologies Model: 5173 TT Year: 2021 Type: UV laser marking station Application: The equipment is designed to laser mark different products with different types of materials. - Glass or plastic jars of different diameters - Coloured plastic bottles of different sizes - Coloured plastic tubes This equipment performs the following functions: - Receiving the product from a conveyor belt. - Detection of the product at the entrance of the machine. - Transition of the product to the laser. - When a bottle is detected, activation of the suction and laser marking. - Discharge of the marked product. A BOFA vacuum cleaner is placed on the side outside the cabin and connected to a nozzle near the marking area. Height: 2150 mm (with glasses) Width: 1250 mm (without screen) Length: 2530 mm (with conveyor) Equipment included: printer, control compute ...

Manufacturer : Mecapack Model: FS930 Year : 2009 Type : thremoforming sealing machine Previous use : food Output : 17 cycles / minute Power : 19 kW Air consumption : 80 m3/h Maximum feed pitch : 450 mm Available tools : 2 sizes Available documentation : Yes Overall dimension = 7400 x 1080 x 1200 Filling length : 1300 mm Options : Jumbo film dispenser ar1000 Product presser Vacuum and gas injection Vacuum pump sogeva 300 Edge cutter cl953 Exit conveyor belt Current format: Lower film roll width: 282 mm Format 268 mm x pitch 337 mm 2 moulds 105 mm x 300 mm

Description: 350 mm blade diameter Quick clamping vice, head rotation, inclined cuts 0 to 45 Collection on: 29/04/2024 or 30/04/2024 afternoon or 06/05/2024  ,  ,Collection times by arrangement  , IMPORTANT: Collection times may vary if separate collection times are explicitly stated in  ,in the item description weight approx.: 300 kg, Approx. Onsite Dimension. (l x w x h): 500 x 1,200 x 1,330 mm

x-travel: 340 mm y-travel: 200 mm z-travel: 340 mm total power requirement: 2,3 kW weight of the machine ca.: 980 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Thread rolling tool, threaded roller set, thread rollers, thread rollers Manufacturer: IKON Thread designation: M14, Right Roller outer diameter: 166 mm Roll width: 160 mm Bore diameter: 70 mm Suitable for spindle diameter: 69.85 mm Reground good condition We have over 100 different rolling tools from different manufacturers in stock: PROFIROLL, PEE-WEE, IKON , EMUGE, MAPAL, GROB, GEMA, HSV and others suitable for thread rolling machine, cold rolling machine, thread rolling machine, profile rolling machine manufacturer PEEWEE, Profiroll, SENY, GROB, Wanderer etc.; used

Thread gauge ring set, 4 pcs. threaded good gauge rings, left-hand thread PAGUS M 6 - M 12 M 6: Ø 32 x 7 mm M 8: Ø 30 x 8 mm M 10: Ø 32 x 10 mm M 12: Ø 38 x 13 mm used, tested ! Dimensions (set): 40 x 40 x 40 mm

480 x 320mm; 30,000 c/h; 4 x MID-WS unwinding stations; 4 X ZHF (Siguture systems); SLT station (card glue device); SHT (Gatherer Stitcher Drum); UTR delivery station; UTR-SNT gripper track; UTR SHT Delivery Station; SNT (trimming drum); UTR SNT Transfer Station; UTR-SNT gripper track carry unit UTR-SNT delivery station; missing copy delivery station (UTR); EP station; VP station; HP station ETR insert drum. Opition 2: Mid AWS (relax station); ZF SHT Feeder; UTR gripper track on 4X RAB insert feeder; 4 x VSS stations; Gripper to follow TO VP station-to ETR insert drum Still in operation: No Verf Gbar: Immediately

Brands E.W. Menn / Ingramatic / P&E / Hilgeland Diameter ranges from 1 mm - 20 mm

Makes: Hilgeland / EW Menn / Ingramatic Diameter ranges 1mm - 20mm

Thread cutting power M 2 - M8 Speed: 700 rpm, luf requirement: 750 l/min, pressure 6 - 7 bar, working range extension: 300 - 1900 mm, Afbau parallel arm: stable arm structure made of hard aluminium profile (38x29) Weight: 23 kg, adapter holder: TCS 1 B - incl. 6 safety slip couplings according to your choice year: 2009

Water cooler tower,1 MW- 1,040 kW, 2pc, make BALTIMORE, each with 2 fan units, see photo.

Column heads, various manufacturers Three-foot stand, Doka Three-foot stand, div. manufacturer Three-foot stand with chain (various manufacturer) Three-foot stand with chain (div. hesteller), without wedge C20 Suspension Z (approx. quantities) Scaly bracket Z (approx. quantities) Scaly bracket, painted (approx. quantities) galvanized lattice box DB grid box

Therapy bathtub, with hydromassage unit/device, stainless steel tub with various water jets, pump, with cold and hot water connection, patient lift, external size 1860x2500x960mm, inner dimension 1800x2340x570mm. New condition.

Thread cutting capacity: M 3 - M 12 Speed: 400 rpm Air demand: 750 l/min Pressure: 6 - 7 bar Extension: 950 mm Standard accessories: Parallel arm Air motor 6 pcs safety slip couplings of your choice guide column with mounting flange Radial boom Maintenance Pneumatic oil for initial filling

We can offer several thread rolling machines with cylindrical dies, any size.

Technical details material.: OPS, APET, PP, HIPS, ABS Forming area (VxH): 520 x 400 mms Depth of draw: 120 mms of material thickness (max.): 1.50 mms of technical details heating, moulding and cutting. This machine has the BFS system which allows to cut in place in the forming station Forming area: 520 x 400 mms of Max sheet width: 590 mms No of cycles are very much depending on the product. However we have been producing more different products with up 50 cycles by minute, but they were no deeper than 40 mms. All movements are 140 mms with a recommended max. depth/hight of 120 mms We have been producing OPS, APET, PP, HIPS and ABS on the machine. The read few years mainly HIPS and APET The thicknest material we have been producing, were 2.0 mms HIPS, but I wants recommend more than 1.5 mms HIPS.

Daub baking master 22.5 m and 178 stove is a state in TOP general and thorough outdated. functions as anew. anew steam apparatus. anew elektrik anew hearthstones incl. Daub Thermooel-boiler arrangement sales incl. cargo and assembly on inquiry I also have to sell other uberholt DAUB oven THERMO-OEL price on inquiry contact: + 48 692 345 660 anbox.pl

Due to a clearance sale this Machine is on Sale at a CLEARANCE Price Inline ILLIG RDM 63/ 15d Thermoformer with: Auto unwind stand Auto Start System Servomotor Indexing Double heating, Sheet Sag Control Auto Rail Spreading for PP Plug assist Max. form area 750 x 305 mm Max. film width 770 mm Max. index 360 mm Max. depth of draw 150 mm Encoder on the Main Drive Shaft SCHLEICHER P-SK 2/ 126F Modern PLC Controller for Control of Form Air, Blow- off etc. Pneumatic Cylinders for automatically raising the Transport Rails after Forming Cycle. aids in removal of difficult Products from the Mold Separate Control Cabinet Machine is ready for PP

Daub Backmeister 18m² Furnace is in TOP condition, General and thorough overhaul. Works like new. New steam apparatus. New electrics New cooking hobs incl. Daub thermal oil boiler system Sale incl. freight and assembly on request I also have to sell other overholt DAUB oven THERMO-OEL Price on request Contact: +48 692 345 660 anbox.pl

Function: The Bosch TFA 241 is a thermoforming machine fills liquid products in previously defined Cup sizes. First, the railway film with H2O2 is sterilized and then heated to a predetermined temperature. This temperature is reached, the slide in the next step will be deep. After the cups got their form, these are filled with product. Then, the upper rail slide with H2O2 is sterilized. Then, the filled Cup with the top track slide are welded and punched out before they are passed on a conveyor belt of the drain. Performance: 13,500 - 31,500 cups per hour Number of runs: 5-track and longitudinal runners current format: Ø 44 mm, height 15 mm maximum Cup size: Ø 44 mm height 29 mm Prefiller: Cleaning: CIP capable Mainfiller: -for liquid products -Manufacturer: Orlita -Dosing type: cold HD -Filling volume: 8-15 cm3 Disinfection: H2O2 Date of printing: Inkjet Dimens ...

410mm planing width electrical height adjustment of the Thicknesser table 3,7KW 5HP 400V 50 Hz star-triangle switch Dressing table length 2000 mm Thickness length 860 mm (890 mm) 4 Column guide in the thicknessing table Planing height 250 mm Dual hinged dressing tables Dressing Guide from 45 ° to 90 ° now only a short time in the price with 4 Tersa knife shaft Special price: NET 4990,- . Options: The comfort package NET 390,-contains Digital display of the thickness table setting 2 Advance speeds 6 and 12 m/1 Thickness Planer table extension 4,8KW 6.6 PS 400V 50 Hz star-triangle switch

Stove is in excellent condition, General and thorough overhauled. Works like new. New steam apparatus. New electrics New stove incl. daub thermal oil boiler plant Sales including freight and installation upon request I also have to sell other uberholt DAUB oven THERMO oil Price on request

2pcs. DAUB oven THERMO-ROLL type RDTO 08.12,5.10 SX02 or 10.12,5.10 SX02 A furnace for 20 sheets Oven is in very good condition, General and thorough overhauled. Works like new. A good steam. Secondary circuit for the baking Chamber. Turbo equipment. All maagnetic pump incl. daub thermal oil boiler system with magnetic pump including. 4 piece rack new Sales including freight and installation upon request I also have to sale 2pcs. DAUB oven THERMO-ROLL type RDTO 08.12,5.7 (7 Edition, high shelves)

Solid spiral drum with 4-way HM reversible plates no adjustment during tool changes necessary Planing width 310 mm Dual fold of the dressing tables Grated dressing table made of grey cast iron Engine power: 230/400V 4.7 PS 3.5 kW Clearance height: 3-225 mm Weight: 240 kg Special price net 2250,-

THIS LINE IS USING FOR ALUMINIUM PROFILES IN PRODUCTION OF WINDOWS, DOORS CURTAIN WALLS ETC. POWER: 60 KW, PLC MITSUBISHI, MAX. WORKING WIDTH: 6.5 M, ALU THICKNESS: 0.2-0.25 MM, STRIP WIDTH: 120 - 230 MM, COIL WEIGHT: 360 KG

Thermal store / buffertank with a nominal capacity of 40,000 litres on 2 steel bases. Contents: approx. 40 m³ / 40,000 litres Material: steel Diameter with insulation: 2.75 m Diameter without insulation: approx. 2,50 m Year built: approx 2007 Buffer in cylindrical shape. Insulated by mineral/glass fibres, 10cm thick. Panels are made of aluminium sheets. The container is in used state, and has been drained and cleaned professionally. The heat storage tank has a separate connection pair (forward / reverse) for the heat supply (E.g. from CHP, boiler) and heat extraction (e.g. from a heating network). Thus, a real buffering is possible, and a temporary extraction higher than the thermal power of the heat generator, eg. to deal with heat peaks. Optionally and at additional cost more pairs of connection can be installed to connect another heat generator to this buffer. Flanges  ...

<br>Collective chain &amp; investors 1 station hand feeding 6 Stehendbogenanleger Double and false sheet control Bulletin station 2 Heftk pfe Hohner Large of roller cleaning for 4 wire wheels 1 Three knife trimmer Media cutting device Band display<br><br>Still in operation: No.<br>Available: immediately