th fleischereimaschinen used for sale

CNC-Portal Cutting Machine Manufacturer: Sato Type: Satronik D5765 Built: 2016 CNC control: Satocontrol CNC 3010 Track width: 5,750 mm 6 x oxyfuel torche without a career without table without filter

We offer you here a used slip-through protection of the manufacturer Jung Heinrich for sale. Technical data for slip-through protection: Shelving system: Jung Heinrich Type: Esmena suitable for clear width: approx. 1,800 mm Protrusion: approx. 60 mm (approx. 30 mm on both sides) Included in delivery are: 01x slip-through protection, used consisting of each: 01x C-Profile, used Material color: yellow Total length: approx. 1,860 mm Profile dimensions: C 50 x 30 x 10 mm Material thickness: approx. 2.00 mm 01x Agraffenwinkel, used Version: left Material colour: RAL 1007 Daffodil yellow Distance stand - rectangular tube: approx. 75 mm Angular dimensions: approx. 135 x 125 mm 01x Agraffenwinkel, used Version: right Material colour: RAL 1007 Daffodil yellow Distance stand - rectangular tube: approx. 75 mm Angular dimensions: approx. 135 x 125 mm 02x Screws ...

SCREEN CTP PLATE RITE 4100 Manufacturer: Screen Model: PLATE RITE 4100 year 2006 with developer of plate washing device. Condition: CTP is working well. available in Jun/ July 2021 Price: on request

4 up Thermal CTP Kodak Trendsetter 400 Model: TS 8 Year: 2003 40 mW laser with Printconsole Price on request

8 UP Thermal CTP Avalon N8 50 XT year 2008 250,000 plates produced MAL 4 cassettes, 2 punches bacher 425W 780W bridge Arkana 125 online-processor ethernet to PIF interface Price: on request

complete set: DEMAG 50T ERGOTECH COMPACT 50-200 1999 (-) ENGEL 75T ES330/75 VICTORY 2001 (working hours 81694) working good tech. condition T557211 for both machines 10 000 EUR

Blow-through lock, supply, cell lock, cell wheel lock, cell wheel lock, dosing lock used AZO Ltd. Type: Z100/2P Inlet approx.: 250 mm Height approx. 450 mm Cell wheel approx. 320 mm Cell wheel width approx. 250 mm approx. 8 cells Hole circle flange approx. 335 mm with suction filter Geared motor with variable speed LENZE 11.342.13.12 0.5 kW 3.3 to 50 rpm 220/380 V Total dimensions approx.: 1500 x 600 x 450 mm The lock was used in the food industry. Probably for transport and dosage of sugar. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

Weibert ADH 410C Abrichtdickenhobel Dressing table (LxW): 1640 x 425 mm Thick table (LxW):600 x 410 mm Working height 850 mm Thickness: 5-225 mm Max. chip acceptance 3 mm Planing shaft diameter: 70 mm Planing knife 3 Speed 5200 rpm Feed 7 m/min Engine: 3 kW 400 V 50HZ Suction nozzle diameter: 120 mm Weight 260 kg G&STÜ-5904041

4 up thermal CTP AGFA Avalon N4-30X with L300 Platemanager year 2019 ONLY 200 plates produced Price: on request

M. No.: 3284 Equipment / Additional information: (min.) material thickness: 0.65 mm (max.) material thickness: 2 mm Technical Data: Width of film, max./min. 450/350 mm Forming area max. 430 x 160 mm Drawing depth max. negative/positive 6/20 mm (on request 22 mm negative) Top heater max. 10,15 kW Driving motors 3,0 kW Total connected load at 100 % duty cycle 12,7 kW Working air pressure 6 bar Air consumption (dependent on product) max. 1250 I/min Rate of water flow max. 1,0 m3/h COMPACT AND ROBUST - giving continuous high output. Easy and ergonomical operation (e.g. take- off height 1300 mm). QUICKLY CHANGEOVER - from 30° to 90° foil feed giving maximum material utilisation for both square and round lids. Heater changeover problem-free. PRECISION - The accuracy of the form table movement is guaranteed by linear guide bearings and hardened rods. The safe ...

New 250 KW 294 KVA water-cooled three-phase motors EMOD WKASYG 315L4-700 (5 pieces) for sale. 4.500 € for each generator plus VAT. FCA freely charged in D-Bergisch Gladbach. Brand: EMOD Type: WKASYG 315L4-700 Year of construction: 2018 Voltage: 400 V rpm: 1510/ min Engine number: 8359010 Weight: 2.322 kg Rated voltage: 400 D Rated current: 425 A Rated power 250 kW/ 294 KVA Operating mode: S1 Engine protection: KALTL. : 3155°C Design: B3 Wave: 80170 KLK location: 0° Protection class: IP55 Frequency (Hz): 50 Condition: Completely new

diameter range 6-12 mm shaft length under head 8-75 mm max. thread length 75 mm output pieces/min 1000

used, good condition from plant disassembly 1x ELTRA DSG10.0 three-phase transformer - Year of construction: 09/10 Power: 10 kVA at 100% ED Prime: 3x 200 V - 210 V - 240 V / 3x 29.5A Sec.: 3x 400 V / 3x 14,4 A 50/60 Hz Isol.Kl.: ta40°C/B Circuit: Dyn5 Cooling: AN Space requirement LxWxH: 670 x 490 x 660 mm (mobile with rollers) Price is plus VAT free loading Warehouse Gießen - shipping possible by arrangement and assumption of costs Changes / errors in the technical data as well as intermediate sales reserved The machine is electrically and mechanically tested before sale and receives a DIN VDE 0113 test report, which is part of our service.

vibratory feeder diameter range 4-12 mm shaft length under head 150 mm max. thread length 105 mm output pieces/min 80-260

tube feeder for studs and headless parts diameter range 6-12mm shaft length under head 95 mm max. thread length 90 mm output pieces/min 55

vibratory feeder diameter range 8-16 mm shaft length under head 150 mm max. thread length 83 mm output pieces/min 120

We offer a position new formwork supports galvanized, with external thread 1,95-3,50m according to DIN Euro standard 1065 manufactured with flat head Class B/D tested 144 pieces a 47,90EUR + 3 x stack pallets 1.43 x 0.87 x 0.69m new a 150.00EUR total 7347,60EUR net Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Office/ warehouse address: Birkenstrasse 15 89185 Humlangen- Hüttisheim, Germany Register court Ulm: HRA722943 VAT-ID-NR: DE279047055

For the joining of veneers with thicknesses 0,4 up to approx. 3 mm. The joining medium is a glue impregnated thread which is applied in zig-zag or in a wavy line accross the joints of the veneer sheets by means of a heated thread guide Throat depth: 1150 mm Feed speed, infinitely adjustable: 10 to 30 m/min Power installed: 1,5 kW

2 Thermal VLF Systems: 1 x AGFA Avalon VLF A xxt year : 2006 5000 paltes with new Laserhead AGFA VLF Platemanager with AGFA Elantrix 150 Onlineprocessorwit transit table to the oven. with Haase oven OG15FU with transit table to gum unit withGum unit RSH with explanation table Price: on request 1x AGFA Avalon VLF A xxt year : 2006 Price: on request

ILLIG STAL80 Trim Press, age 1988:- Technical data ILLIG STAL 80 :  Punching table area max. 1000 x 510 mm  Material width max. 800 mm  Infeed length 20 - 400 mm  Stroke height 200 mm  Mold height 272 mm Part height (positive and negative) max. 100 mm  Number of strokes (infinitely variable) 25 - 130 /min Trimmed Parts are stacked through the Punch Tool The Skeletal Waste is fed directly into the Grinder ILLIG RS75 Under the Trim Press Grinder, Motor 8.3 kW, age 1995

Thread rolling machine make FETTE type R 40Fabr. -No: 818 built in 1980Technical specifications:Metric thread rolling range: 12 - 39 mmThread rolling range inch: 7/16 - 1 1/2 large rollable thread length: 500 mmSpindle passage: 46 mm6 spindle speeds: 250 - 2000 rpm.Gr. clamping diameter of the vice: 70 mmClamping stroke: 40 mmInfinitely variable feed rate: 600 - 3500 mm / minRapid forward / rapid return: 9 m / minTotal power requirement: 18 kWDimensions L x W x H: 1830 x 900 x 1145 mmWeight approx: 1000 kgWith- Hydraulic unit for clamping and feeding- cooling device- separate control cabinet- Thread rolling head FETTE type FU 34/1used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your  ...

Thread cutting machine make REMS type Tornado 2000Fabr. -No: 34022697for the efficient production of pipe and bolt threads, thread cutting, cutting off, deburring, nipple cutting in the workshop and on the construction siteTechnical specifications:Pipe thread size: 3/8 - 2 Speed: 60 rpm.Power connection: 220 V, 50 HzDrive power: 1200 WExternal dimensions L x W x H (without basement): 730 x 435 x 280 mmWeight of the machine without accessories: 31 kgWith- foot switch- thread cutting head- pipe cutter- pipe support- deburrerused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Dynamic axial compression flow-through bed type Dan-Process,Ø 200 mm

thread dia.: 254 mm grinding length: 350 mm thread pitch: 51 mm Control: SIEMENS S 8 total power requirement: 12 kW weight of the machine ca.: 5000 kg dimensions of the machine ca.: m B A H M Ü L L E R Automatic Internal Thread Grinding Machine Model IPE 12 i.S. Year 1985 Serial No. 103174 _______________________________________________________ workpiece Ø, max. 300 mm workpiece length, approx. 350 mm height of centers (WP spindle/grinding spindle) 300 mm table stroke approx. 450 mm thread diameter ground max. approx. 254 mm thread diameter ground min. approx. 25,4 mm thread length ground in one setting max. 250 mm Lead range, max. 51 mm Lead angle max. 10 ° Total electrical load, approx. 12 kW - 380 V - 50 Hz Weight, approx. 5,000 kg  ...

thread dia.: 12 mm threading length: 20 mm turning speeds: 400 U/min working area: 500 - 1600 mm weight of the machine ca.: 25 Kg dimensions of the machine ca.: m • pneumatical thread cutting device, M3 - M12, • with 6 adapters of thread cuttings, Size 1, • control valve with lubrication, • order no. 31681, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine is used for the processing of pipe and pipe components, including thread cutting in terms of the single and mass production. Diameter range of processable pipes: 70-290 mm Max diameter of processable work-piece: -Over stand: 800 mm -Over support: 450 mm Diameter of spindle hole: 300 mm Max turning length: -With bevel ruler: 800 mm -W/O bevel ruler: 420 mm Amount of spindle speeds: 12 Limits of spindle rotation frequency: 8-355 turn/min Amount of longitudinal and cross support servings: 32 Limits of: -Longitudinal servings: 0,064-1,025 mm/turn -Cross servings: 0,034-0,458 mm/turn Step limits of cuttable: -Metric threads: 1-12 mm -Inch threads (amount of threads for 1): 2-24 Max turn angle of bevel ruler: +- 10 degrees Overall machine dimensions: -Length: 3600 mm -Width: 1860 mm -Height: 1525 mm Machine weight with electric equipment: 9050 kg

STANKOIMPORT 5822M thread grinding machine was manufactured in the USSR. The machine is used for the process of grinding threads to give them the correct dimensions and roughness. During this process, a grinding wheel with a diameter of 400 mm is used to remove a small allowance from the workpiece, forming the thread shape on it. The grinding machine processes threads with a maximum diameter of 200 mm, a length of 500 mm and a weight of up to 30 kg. Depending on the choiceed disc, the diameter of the workpiece can be from 3 to 150 mm (grinding with a single-coil disc) or from 10 to 120 mm (grinding with a multi-coil disc). The total weight of the grinding machine is approximately 5 tons. Technical data of the STANKOIMPORT 5822M thread grinding machine - maximum workpiece diameter: 200 mm - diameter of the workpiece grinded with single-coil disc: 3-150 mm - diameter of the workpi ...

spindle taper: 2 x 40 ISA forward bearing diameter: 110 mm milling head speed: 100 - 4500 U/min milling drive: 5,1 kW workpiece length - max.: 830 mm taper diameter: 78 g6 mm centre height: 260 mm turning speed range - stepless: max. 15 U/min distance of spindles: 135 mm spindle nose: DIN 55026 Gr. 5 : : stroke of workpiece slide: 810 mm Feed speed: max. 6 m/min. surface area: 200 x 1750 mm : tool post (Z-axis): stroke of tool slide: 120 mm Feed speed: max. 2 m/min. column movement: 200 mm : tail stock: tailstock quill stroke: 100 mm morse taper: 3 MK centre height: 260 mm axial distance of the quills: 135 mm passage of steadyrest: 40 - 80 mm control: SIEMENS SINUMERIK 810 weight of the machine ca.: 6,5 t dimensions of the machine ca.: 3,20 x 2,66 x 1,76 m with SIEMENS-control SINUMERIK 810/820 acc.: NC-dividing unit with back stop, various toolholders, steadies, running centres,  ...

thread dia.: 250 mm grinding length: 500 mm thread pitch: - mm tread diameter: 2 mm clamping length - spindle head right: 900 mm spindle bore: 66 mm clamping length - spindle head left: 1020 mm workpiece weight: 200 kg pitch: 0,8 - 288 mm pitch angle: +/- 40 ° workpiece turning speeds: 0,4 - 50 U/min grinding wheel width: 8/13/16/20/30 mm table feed: 1500 mm/min grinding spindle speed: 1900-2450 U/min no. of feed: 12 max. thread profile: 12,5 Modul number of starts: 1 - 8 dia. of hole: 160 mm grinding wheel diam. min/max.: 275 / 350 mm grinding motor: 16 kW electrics - voltage/frequency: 3 x 380 / 50 V/Hz total power requirement: ca. 20 / 45 kW / KVA weight of the machine ca.: 4,6 t dimensions of the machine ca.: 5,7 x 4,7 x 2,6 m profiling device CNC: CNC controlled Thread & Worm Grinding Machine equipped with: - CNC control Grossenbacher AG / Reishauer modell FMS 6 - CNC profiling de ...

workpiece diameter: 30 mm workpiece diameter: 30 mm threading length: 110 mm threading length: 110 mm thread pitch: 0,5-2,75 mm/GG thread pitch: 0,5-2,75 mm/GG total power requirement: 4,5 kW total power requirement: 4,5 kW weight of the machine ca.: 1,7 t weight of the machine ca.: 1,7 t dimensions of the machine ca.: m dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

New device Special offer!

sheet width: 3355 mm plate thickness: 63,5 mm roll diameter: 686 mm voltage: 400 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: 20 M turning speeds: 400 U/min thread: M 4 - M 20 M working area: 1900 Rmax. working range: 200 Rmin. Description: The AT models have a radius of up to 1900 mm and their construction a flexible workspace. For professional use. Easy to mount on a worktop. Furnishing: - including 7 thread cutting inserts • M3 20111812 DIN 371 19 • M6 20111823 DIN 371 31 • M8 20111824 DIN 371 31 • M10 20111826 DIN 371 31 • M12 20111827 DIN 376 31 • M16 20111829 DIN 376 31 • M20 20111831 DIN 376 31 - Control valve with lubrication - Including air motor - Adapter connection size 2 - The cutting head can be pivoted vertically downwards by 90 ° - The cutting head is pivoted and rotatable through 360 ° - Operating instructions in German without the perforated table as per Fig. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1050 mm plate thickness: 3,3 mm pre-bending: 3,0 mm roll length: 1050 mm roll diameter: 90,0 mm min. dia.: 130,0 mm engine output: 1,1 kW weight: 570 kg range L-W-H: 1.800 x 800 x 1.130 mm Furnishing: - Asymmetrical 3-roll bending machine with motor drive - hardened rollers - Motorized rear roller adjustment - Upper roller can be swiveled out - Conical bending device - self-braking main engine - digital display - foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1250 mm plate thickness: 5,5 mm pre-bending: 5,0 mm roll diam. toproll: 140 mm min. dia.: 210 mm engine output: 2,2 kW turning speeds: 5,7 U/min weight: 1365 kg range L-W-H: 2.020 x 900 x 1.200 mm Furnishing: - 2 central rollers driven by an electric motor - Upper beam can be swiveled out - Conical bending device - foot switch - self-braking main engine - CE mark / declaration of conformity including special equipment: - Motorized rear roller adjustment - hardened rollers - digital display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2050 mm plate thickness: 4,5 mm max. plate thickness: 4,0 mm anbiegen roll length: 2050 mm min. dia.: 210 mm roll diam. toproll: 140 mm weight: 1530 kg range L-W-H: 3220 x 1200 x 900 mm Furnishing: - Upper and lower roller electr. driven - Upper roller can be swiveled out - Conical bending device - Asymmetrical roller arrangement - self-braking main engine - separate control and operating panel - Safety line - foot switch - Operating instructions in German - CE mark / declaration of conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment - digital display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: 12 M max. turning speeds: 400 U/min thread: M 3 - M 12 M working area: 1600 R max. working range: 500 Rmin. weight: 16 kg Description: The AT II models have a radius of up to 1600 mm and thanks to their construction a flexible workspace. For professional use. Easy to mount on a worktop. Furnishing: - Tool holder with 6 cutter holders • M3 20111812 DIN 371 19 • M4 20111814 DIN 371 19 • M6 20111816 DIN 371 19 • M8 20111817 DIN 371 19 • M10 20111818 DIN 376 19 • M12 20111820 DIN 376 19 - with slip clutch - Control valve with lubrication - Including compressed air motor / maintenance unit - Adapter connection size 1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1290 mm plate thickness: 5 mm pre-bending: ja roll diameter: 120 mm roll speed: 1 - 6 m/min total power requirement: 1,1 kW weight of the machine ca.: 825 kg Asymmetry roll arrangement, pre-bending ist possible. This new machine is in the following sizes obtainable: working length from 1040 until 2540 mm, max. plate thickness ( 400 N/mm² ) from 1 until 6,5 mm. We are distributor only for Germany. Machine dealer with own stock of 2500 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece diameter: 50 mm threading length: 100 mm thread pitch: mm total power requirement: 1 kW weight of the machine ca.: 1500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece diameter: 320 mm threading length: 300 mm thread pitch: mm total power requirement: 90 kW weight of the machine ca.: 12000 kg dimensions of the machine ca.: m Thread and worm grinder for steering worms The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: 1/16 - 2 threading length: 165 mm thread pitch: mm turning speed range: 40 - 53 U/min voltage: 230 V total power requirement: 1,7 kW weight of the machine ca.: 50 kg dimensions of the machine ca.: 1,10 x 1,10 x 1,10 m - Serial-No.: 34024750 - foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: M3 - M16 mm turning speeds: 300 U/min throat: 100 - 950 mm weight: 25 kg Pneumatic tapping machine up to M16, with a large radius. Supplied with various adapters, e.g. for drilling and a 90° adapter for tapping in all directions. Accessories: M3-M16 supplied with reducer/lubrication set including tapping adapters (6 pcs) including air motor size 1 adapter connection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning speeds: 400 U/min : M3 - M12 throat: 100 - 950 mm weight: 16 kg The AQ 950 series pneumatic tapping machines have a radius of up to 950 mm. The construction of the machines enables you to get to the work piece quickly. For professional use. Easily mounted on a work surface. Accessoiries: M2-M12 supplied with reducer/lubrication set including tapping adapters including air motor size 1 adapter connection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning speeds: 700 U/min : M2-M8 throat: 100 - 900 mm weight: 16 kg The AQ 950 series pneumatic tapping machines have a radius of up to 950 mm. The construction of the machines enables you to get to the work piece quickly. For professional use. Easily mounted on a work surface. Accessories: M2-M8 supplied with reducer/lubrication set including tapping adapters including air motor size 1 adapter connection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning speeds: 400 U/min working range: 500 - 1600 mm thread: M3 - M 12 collets: 6 weight of the machine ca.: 20 kg The AT II series pneumatic tapping machines have a radius of up to 1600 mm. The construction of the machines enables you to reach the workpiece quickly. Easily mounted on a work surface. For professional use. Accessories: M3-M12 supplied with reducer/lubrication set including tapping adapters (6 pcs) including air motor size 1 adapter connection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: M2 - M 12 mm : 9,5 mm turning speed range - thread cutting: 250 U/min collet holder: 6 / M2 - M12 Air consumption: 0,4 l/min. turning speeds: 250 U/min weight: 4 kg Pneumatic driven tapping pistol for quick operation on spot. Professional excecution. Standard collets do fit. Features: pneumatic drive system wrench The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 630 mm; Planing height: 300 mm; Planing shaft: Tersa; Number of knives: 4; Height adjustment: electric; Display planing thickness: mech. Counter; Feed speed: 5 / 8 / 12 / 18; Feed roller: steel; Pressure beams: articulated; Pull-out roller: rubber; Table rollers: no; Motor power: 9 kW; Suction port: 150mm; Machine length: 1200mm; Machine width: 1200 mm; Weight: 810 kg; Motorized thicknessing table stroke with two speeds Numerical display for working height Thickness table made of cast iron The thicknessing table is mounted on four large trapezoidal threaded spindles for maximum stability and precision Four feed speeds Optionally with two rollers in the thickness table Standard with noise protection and chip protection curtain on the workpiece inlet and outlet roller contact pressure adjustable Front feed roller with helical gear Pull-out roller with rubber ...

Key data: 520 , 7

Holzkraft SCM thickness planer S 52ES Product name: Thickness planer Model: S 52ES Type: SP-03 Manufacturer: SCM (SCM Industria S.p.A.) Machine number: KK00019806 Year of construction: 2021 Condition: as good as new technical details: - Work table size: 850 x 520 mm - Useful width: 520 mm - max. chip removal per operation: 5 mm - Knife shaft diameter: 120 mm - Number of knives: 30x3x520 / 4 pieces - Knife shaft speed: 5,200 rpm - Holding time knife shaft: less than 10 sec - Feed speed during thickness planing: 5 - 8 - 12 - 18 m/min - Diameter of the extraction hood (plastic): 120 mm - required speed of the extraction air: dry chips = 20 m/sec, wet chips = 28 m/sec - Consumption of extraction air [diameter 120 mm]: 814 m³/h dry chips, 1,140 m³/h wet chips workpiece height: 240 mm workpiece width: 520 mm - min. workpiece height: 3.0 mm - min. workpiece length:  ...