tetra pak 300 used for sale

Neat lemken solitaire 300/24 9. Fully working condition. Some surface rusts but other than that barely used machine. Air tubes are currently not in the picture, these have been ordered new and will be included after purchase. Auction-ID: A3-43520-17119

The Lora Pergola is ideal for luxury villas, hotel terraces and restaurants looking for a year-round outdoor solution Key features and benefits Remote control: The slats are opened and closed by simply pressing a button via the remote control. Precise adjustment: You can precisely determine the angle of inclination of the slats to dose the amount of sun or completely close the roof in case of rain. Reinforced construction: Uses 150 x 150 mm square posts and wider double-layer slats that ensure exceptional strength. Wind: Certified resistance to winds of up to 35 m/s (approximately 120 km/h). Innovative drainage and electricity system: The posts are designed so that the water and electrical channels are separate. This allows cables to be hidden inside the post for a cleaner aesthetic and greater safety. Adjustable ventilation and light: The upper slats are adjustable, allowing precise c ...

Machine engineered to sharpen circular blades made in carbide and steel. With accurate setting it can sharpen teeth automatically with adjustable speed. The motor can rotate in 2 directions so as to sharpen both angles of the blade. Sharpening diameters: from 60 to 300 mm, up to 45 teeth per minute. Power 550 W. Item dimensions 650 x 650 x 1050 mm. Item weight 103 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 650 x 630 x 1130 mm; Approx. Weight: 103kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-250

Neat lemken solitaire 300/24 9. Fully working condition. Some surface rusts but other than that barely used machine. Air tubes are currently not in the picture, these have been ordered new and will be included after purchase. Auction-ID: A3-43520-17017

Pneumatic tool for manual chamfering with a range up to 2-3 millimetres. Chamfering capacity C0.1-C1.5; radius R1.5. No-load rotation speed 3000 rpm, bore 0.1 - 0.9 mm, pneumatic supply 0.4 m³/min, operating pressure 0.6 - 0.8 mpa. Item weight 0.44 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 155 x 100 x 60 mm; Approx. Weight: 1kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-108

Measuring range: 0 - 300 mm Measuring resolution: 0.01 mm Digital height gauge with zeroing system for comparative measurements (relative zero and negative positions) Machine condition: unchecked. Approx. Transport dimension: LxWxH 520 x 260 x 110 mm; Approx. Weight: 5kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-111

3 UNITS/SETS OF ATT0037 PACKED TOGETHER. A SINGLE ATT0037 CORRESPONDS TO: Magnetic force 40 KGF - permanent. Dense polarity for machining small and thin pieces. High-strength magnet system. Activation and deactivation by hand lever. In the OFF position, a weak reverse shot takes care of facilitating the removal of parts. With longitudinal and transverse stop. Machine condition: unchecked. Approx. Transport dimension: LxWxH 550 x 350 x 110 mm; Approx. Weight: 70kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 3x ATT0037 PACKED TOGETHER: 550 x 1050 x h110 mm - 210 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-115

Measuring range: 0 - 300 mm Measuring resolution: 0.01 mm Digital height gauge with zeroing system for comparative measurements (relative zero and negative positions) Machine condition: unchecked. Approx. Transport dimension: LxWxH 520 x 260 x 110 mm; Approx. Weight: 5kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-261

Set composed of 12 centesimal micrometers for measurements from 0 to 300 mm. Measurements: 0-25mm; 25-50mm; 50-75mm; 75-100mm; 100-125mm; 125-150mm; 150-175mm; 175-200mm; 200-225mm; 225-250mm; 250-275mm; 275-300mm. Certificate included Machine condition: unchecked. Approx. Transport dimension: LxWxH 530 x 380 x 340 mm; Approx. Weight: 15kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-66

Precision bore gauge with two contact points, with elastic elements for centering. Lightweight and robust construction with CFRP elements for less thermal expansion and greater corrosion protection. Handle on the holder for less thermal influences. Smooth and precise transmission of the contact tip stroke via a curved segment. The different contact points with fixed hardened steel ball allow you to compose the different ⌀ to be measured. Application: For precision measurement of ⌀, roundness and cylindricity of internal bores and profiles. In wooden box. Range: 100-300 mm, Depth: 350mm Machine condition: unchecked. Approx. Transport dimension: LxWxH 570 x 170 x 55 mm; Approx. Weight: 3kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-302

10 UNITS/SETS OF LON0018 PACKED TOGETHER. A SINGLE LON0018 CORRESPONDS TO: Pneumatic tool for manual chamfering with a range up to 2-3 millimetres. Chamfering capacity C0.1-C1.5; radius R1.5. No-load rotation speed 3000 rpm, bore 0.1 - 0.9 mm, pneumatic supply 0.4 m³/min, operating pressure 0.6 - 0.8 mpa. Item weight 0.44 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 155 x 100 x 60 mm; Approx. Weight: 1kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 10x LON0018 PACKED TOGETHER: 155 x 1000 x h60 mm - 10 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-216

2 UNITS/SETS OF LON0020 PACKED TOGETHER. A SINGLE LON0020 CORRESPONDS TO: Machine engineered to sharpen circular blades made in carbide and steel. With accurate setting it can sharpen teeth automatically with adjustable speed. The motor can rotate in 2 directions so as to sharpen both angles of the blade. Sharpening diameters: from 60 to 300 mm, up to 45 teeth per minute. Power 550 W. Item dimensions 650 x 650 x 1050 mm. Item weight 103 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 650 x 630 x 1130 mm; Approx. Weight: 103kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 2x LON0020 PACKED TOGETHER: 650 x 1260 x h1130 mm - 206 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-336

4 UNITS/SETS OF SDM0073 PACKED TOGETHER. A SINGLE SDM0073 CORRESPONDS TO: Measuring range: 0 - 300 mm Measuring resolution: 0.01 mm Digital height gauge with zeroing system for comparative measurements (relative zero and negative positions) Machine condition: unchecked. Approx. Transport dimension: LxWxH 520 x 260 x 110 mm; Approx. Weight: 5kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 4x SDM0073 PACKED TOGETHER: 520 x 1040 x h110 mm - 20 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-23

Set composed of 12 centesimal micrometers for measurements from 0 to 300 mm. Measurements: 0-25mm; 25-50mm; 50-75mm; 75-100mm; 100-125mm; 125-150mm; 150-175mm; 175-200mm; 200-225mm; 225-250mm; 250-275mm; 275-300mm. Certificate included Machine condition: unchecked. Approx. Transport dimension: LxWxH 530 x 380 x 340 mm; Approx. Weight: 15kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-337

measuring stand / measuring column with digital readout LD 300. The unit is equipped with an LCD display and a measuring system based on a GIVI MISURE scale / encoder (marking visible). Suitable for height / displacement checks, part setting and general measuring work at the workstation. Key features: • Model: LD 300 • Digital readout with LCD display mounted on the column • Measuring system: GIVI MISURE scale / encoder • Design: stable base and column, manual adjustment by control knobs • Visible equipment: holder / arm for dial indicator and locating element / mounting socket on the base Application: • quick height and displacement measurements • part / tool setting • inspection work in toolroom, quality Auction-ID: A7-46285-16

Benchtop machinery for sharpening multiple types of tools (turning tools, knives, boring tools, etc.). Work surface with single guide, 360° rotating motor, double-direction rotation wheel. Maximum workable diameter: 300 mm Stroke: 150 mm Working area approx.: 130 x 550 mm Grinding wheel size: Ø 125 x 50 x Ø 32 mm Speed: 2800 rpm Engine: 3/4 hp - 220/380 V Item size: 700 x 630 x 630 mm Item weight: 160-170kg Machine condition: unchecked. Approx. Transport dimension: LxWxH 660 x 660 x 760 mm; Approx. Weight: 170kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-134

4 UNITS/SETS OF SDM0073 PACKED TOGETHER. A SINGLE SDM0073 CORRESPONDS TO: Measuring range: 0 - 300 mm Measuring resolution: 0.01 mm Digital height gauge with zeroing system for comparative measurements (relative zero and negative positions) Machine condition: unchecked. Approx. Transport dimension: LxWxH 520 x 260 x 110 mm; Approx. Weight: 5kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 4x SDM0073 PACKED TOGETHER: 520 x 1040 x h110 mm - 20 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-184

2 UNITS/SETS OF LON0020 PACKED TOGETHER. A SINGLE LON0020 CORRESPONDS TO: Machine engineered to sharpen circular blades made in carbide and steel. With accurate setting it can sharpen teeth automatically with adjustable speed. The motor can rotate in 2 directions so as to sharpen both angles of the blade. Sharpening diameters: from 60 to 300 mm, up to 45 teeth per minute. Power 550 W. Item dimensions 650 x 650 x 1050 mm. Item weight 103 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 650 x 630 x 1130 mm; Approx. Weight: 103kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 2x LON0020 PACKED TOGETHER: 650 x 1260 x h1130 mm - 206 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-276

The Lora Pergola is ideal for luxury villas, hotel terraces and restaurants looking for a year-round outdoor solution, this model offers motorized blinds on two sides controlled by remote control. Key features and benefits Remote control: The slats are opened and closed by simply pressing a button via the remote control. Precise adjustment: You can precisely determine the angle of inclination of the slats to dose the amount of sun or completely close the roof in case of rain. Reinforced construction: Uses 150 x 150 mm square posts and wider double-layer slats that ensure exceptional strength. Wind: Certified resistance to winds of up to 35 m/s (approximately 120 km/h). Innovative drainage and electricity system: The posts are designed so that the water and electrical channels are separate. This allows cables to be hidden inside the post for a cleaner aesthetic and greater safety. Adjus ...

2 UNITS/SETS OF LON0016 PACKED TOGETHER. A SINGLE LON0016 CORRESPONDS TO: Benchtop machinery for sharpening multiple types of tools (turning tools, knives, boring tools, etc.). Work surface with single guide, 360° rotating motor, double-direction rotation wheel. Maximum workable diameter: 300 mm Stroke: 150 mm Working area approx.: 130 x 550 mm Grinding wheel size: Ø 125 x 50 x Ø 32 mm Speed: 2800 rpm Engine: 3/4 hp - 220/380 V Item size: 700 x 630 x 630 mm Item weight: 160-170kg Machine condition: unchecked. Approx. Transport dimension: LxWxH 660 x 660 x 760 mm; Approx. Weight: 170kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 2x LON0016 PACKED TOGETHER: 660 x 1320 x h760 mm - 340 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: ...

Machine engineered to sharpen circular blades made in carbide and steel. With accurate setting it can sharpen teeth automatically with adjustable speed. The motor can rotate in 2 directions so as to sharpen both angles of the blade. Sharpening diameters: from 60 to 300 mm, up to 45 teeth per minute. Power 550 W. Item dimensions 650 x 650 x 1050 mm. Item weight 103 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 650 x 630 x 1130 mm; Approx. Weight: 103kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-350

Magnetic force 300 Kg - permanent. Dense polarity for machining small and thin pieces. High-strength magnet system. Activation and deactivation by hand lever. In the OFF position, a weak reverse shot takes care of facilitating the removal of parts. With longitudinal and transverse stop. Machine condition: unchecked. Approx. Transport dimension: LxWxH 220 x 250 x 130 mm; Approx. Weight: 9kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-173

Toilet brush set with silicone head – black - Branding Black Marketplace Quantity approx. 1940 pcs. Toilet Brush Set with Silicone Head – Black and White for Wall Mounting - Branding Black Marketplace Quantity approx. 1130 pcs. Replacement Silicone Brush Head – Round Head with Rubber Bristles Grey and Black Quantity: approx. 8950 pcs. Grab handles black - partly with branding Black Marketplace Number approx. 2050 pcs. Packed in boxes in different units e.g.: Brush Set - 1 box of 48 pcs. Brushes - 1 box of 350 pcs. Handles - 1 box á 432 pcs. Auction-ID: A1-46296-903

Machine engineered to sharpen circular blades made in carbide and steel. With accurate setting it can sharpen teeth automatically with adjustable speed. The motor can rotate in 2 directions so as to sharpen both angles of the blade. Sharpening diameters: from 60 to 300 mm, up to 45 teeth per minute. Power 550 W. Item dimensions 650 x 650 x 1050 mm. Item weight 103 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 650 x 630 x 1130 mm; Approx. Weight: 103kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-290

3 UNITS/SETS OF ATT0009 PACKED TOGETHER. A SINGLE ATT0009 CORRESPONDS TO: Pressure 3000 Kg (100x100 mm), Material: cast iron, Jaw width: 100 mm, Jaw height: 30 mm, Maximum opening: 100 mm Machine condition: unchecked. Approx. Transport dimension: LxWxH 330 x 150 x 160 mm; Approx. Weight: 15kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 3x ATT0009 PACKED TOGETHER: 330 x 450 x h160 mm - 45 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-2

Magnetic force 300 Kg - permanent. Dense polarity for machining small and thin pieces. High-strength magnet system. Activation and deactivation by hand lever. In the OFF position, a weak reverse shot takes care of facilitating the removal of parts. With longitudinal and transverse stop. Machine condition: unchecked. Approx. Transport dimension: LxWxH 220 x 250 x 130 mm; Approx. Weight: 9kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-266

Magnetic force 40 KGF - permanent. Dense polarity for machining small and thin pieces. High-strength magnet system. Activation and deactivation by hand lever. In the OFF position, a weak reverse shot takes care of facilitating the removal of parts. With longitudinal and transverse stop. Machine condition: unchecked. Approx. Transport dimension: LxWxH 550 x 350 x 110 mm; Approx. Weight: 70kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-344

2 UNITS/SETS OF LON0020 PACKED TOGETHER. A SINGLE LON0020 CORRESPONDS TO: Machine engineered to sharpen circular blades made in carbide and steel. With accurate setting it can sharpen teeth automatically with adjustable speed. The motor can rotate in 2 directions so as to sharpen both angles of the blade. Sharpening diameters: from 60 to 300 mm, up to 45 teeth per minute. Power 550 W. Item dimensions 650 x 650 x 1050 mm. Item weight 103 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 650 x 630 x 1130 mm; Approx. Weight: 103kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 2x LON0020 PACKED TOGETHER: 650 x 1260 x h1130 mm - 206 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-22

Set composed of 12 centesimal micrometers for measurements from 0 to 300 mm. Measurements: 0-25mm; 25-50mm; 50-75mm; 75-100mm; 100-125mm; 125-150mm; 150-175mm; 175-200mm; 200-225mm; 225-250mm; 250-275mm; 275-300mm. Certificate included Machine condition: unchecked. Approx. Transport dimension: LxWxH 530 x 380 x 340 mm; Approx. Weight: 15kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-212

2 UNITS/SETS OF LON0016 PACKED TOGETHER. A SINGLE LON0016 CORRESPONDS TO: Benchtop machinery for sharpening multiple types of tools (turning tools, knives, boring tools, etc.). Work surface with single guide, 360° rotating motor, double-direction rotation wheel. Maximum workable diameter: 300 mm Stroke: 150 mm Working area approx.: 130 x 550 mm Grinding wheel size: Ø 125 x 50 x Ø 32 mm Speed: 2800 rpm Engine: 3/4 hp - 220/380 V Item size: 700 x 630 x 630 mm Item weight: 160-170kg Machine condition: unchecked. Approx. Transport dimension: LxWxH 660 x 660 x 760 mm; Approx. Weight: 170kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 2x LON0016 PACKED TOGETHER: 660 x 1320 x h760 mm - 340 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: ...

10 UNITS/SETS OF LON0018 PACKED TOGETHER. A SINGLE LON0018 CORRESPONDS TO: Pneumatic tool for manual chamfering with a range up to 2-3 millimetres. Chamfering capacity C0.1-C1.5; radius R1.5. No-load rotation speed 3000 rpm, bore 0.1 - 0.9 mm, pneumatic supply 0.4 m³/min, operating pressure 0.6 - 0.8 mpa. Item weight 0.44 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 155 x 100 x 60 mm; Approx. Weight: 1kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 10x LON0018 PACKED TOGETHER: 155 x 1000 x h60 mm - 10 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-14

Benchtop machinery for sharpening multiple types of tools (turning tools, knives, boring tools, etc.). Work surface with single guide, 360° rotating motor, double-direction rotation wheel. Maximum workable diameter: 300 mm Stroke: 150 mm Working area approx.: 130 x 550 mm Grinding wheel size: Ø 125 x 50 x Ø 32 mm Speed: 2800 rpm Engine: 3/4 hp - 220/380 V Item size: 700 x 630 x 630 mm Item weight: 160-170kg Machine condition: unchecked. Approx. Transport dimension: LxWxH 660 x 660 x 760 mm; Approx. Weight: 170kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-322

consisting of 1x cooling water pump unit, cooling capacity 260 Kw, equipped with 3x 2000 ltr cooling water tanks, Bitzer cooling compressor, 4x circulation pump, control box, floor area 4400x2500 mm, height approximately 4100 mm, 1x Güntner condenser on the roof, equipped with 8x fan, condenser size (LxWxH) 7500x2400x2700 mm, Please note! pick up by appointment, piping not included, refrigerant has already been drained, Auction-ID: A1-43992-26

To be controlled via Wifi, Heating capacity (kW) 2.2, Power connection (kW) 0.53, COP value 4.15, Energy label A+, Maximum current connection (W) 3000, Nominal current (A) 2.9, Maximum current (A) 15, Power supply 220V ~ 50 Hz, Backup electric heating (W) 2000, Refrigerant R134a/1050g, Compressor Rotary/Panasonic, Net dimension (mm) Φ 620×2038, Package dimension (mm) 700 x 700 x 2090, Net weight (Kg) 130, Gross weight (Kg) 140, Noise (dB) 48, Water tank capacity (L) 300, Working temperature range (°C) -7 ~ 43 Auction-ID: A1-40106-103

New and unused Auction-ID: A7-46327-113

Extra options : Clamp and Rotator , work lighting , operation unknown Viewing by appointment Auction-ID: A1-43890-50

3000 ANSI lumens, 1,920x1,080 Full HD, DLP; Video signal input: HDMI, VGA; electrical connection: 100-240 V - 50/60 Hz; Color: Black; Dimensions of the transport box: 54x31x20 cm (L/W/H), total weight: 11 kg Auction-ID: A7-46311-33

Unaudited Auction-ID: A7-46327-150

Unchecked from practice Closure Auction-ID: A7-46327-64

0-200 mm Auction-ID: A1-43992-174

• Make an appointment for the viewing day via hollandshoeve@solcon.nl • April 3, 2026 from 09:00 to 12:00 Auction-ID: A1-42015-250

Engine and turbo overhaul, Equipped with new brake pads, 3.0 turbo diesel. Auction-ID: A1-42015-5

76 pieces Oak Composite Slats / Composite Room Divider 300 cm long, 10 cm wide, 5 cm thick. Includes black aluminum cover caps for bottom and top and aluminum reinforcement bar. Unused on pallet. Auction-ID: A1-40136-366

Approx. 300 Mickey Mouse comic booklets, special issue, poster Auction-ID: A7-46327-73

76 pieces Black Composite Slats / Composite Room Divider 300 cm long, 10 cm wide, 5 cm thick. Includes black aluminum cover caps for bottom and top and aluminum reinforcement bar. Unused on pallet. Auction-ID: A1-40136-368

Stamp size 4x 120x150cm. Press height 88cm. Includes scissor lift table movable with rails dimensions lxw approximately 141x103.5cm extendable to 300cm, height adjustable rear output roller conveyor dimensions lxw approximately 480x180cm, 2 parts 2-way pneumatic roller conveyor dimensions total lxbxh 500x103x92cm. The required surface area is approximately 600x570cm. Includes air and power reel. Auction-ID: A1-41994-5

76 pieces Teak Composite Blinds / Composite Room Divider 300 cm long, 10 cm wide, 5 cm thick. Includes black aluminum cover caps for bottom and top and aluminum reinforcement bar. Unused on pallet. Auction-ID: A1-40136-367

EWM PICO 300 CEL PWS TIG welding machine; TIG version; without torch and ground cable Auction-ID: A1-45170-46