tetra pak 200 used for sale

An electric plate vacuum lifting frame Framatech with tilting function is available, load capacity: 2000kg, suction frame dimensions X/Y: approx. 1200mm/2400mm, suction pads: 16, suction pad diameter: 290mm, dead weight: approx. 400kg, documentation available, an on site inspection is possible.

I am selling a vertical continuous CNC milling and drilling machine HOMAG Weeke Drillteq V-200 (formerly BHX 055), built in 2023. Configuration: 1 pc. milling unit with tool change 4-positions HSK63 13 + 4 + 2 pcs Drilling Spindles 1 pc grooved saw Feed back, which slices the elements back to operator or rear as the conveyor machine. Condition as good as new. With full documentation and CE Available the same.

: neu : ca. 4 Monate ab Auftragse : Italien : 132500 € : 2504.25 € : 200 to : 500 mm : 1250x1000 mm : 600 mm : 25 mm/s : 3,5 mm/s : 7.5 kW : 1550 mm : 1300 mm : 2700 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual OPTIONS: Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request The data for this ad was created with ...

The machine is in good technical condition, after prior agreement it is possible to test it. ideal machine for complete machining in one clamping (turning + milling). Equipment and parameters: - main spindle + counter spindle (complete machining from both sides) milling spindle with B axis Mazatrol SmoothG control 36-position tool magazine Capto C6 / PSC63 internal cooling large number of accessories (jaws, clamps, holders, etc.) a functional postprocessor for SolidCAM is included in the sale significant time and cost savings when introducing the machine into production

The machine is in good technical condition, after prior agreement it is possible to test it. Head Precitech - Germany, Source IPG. Dior plates changed this year. Automatic change - 2 tables. Table 3x1.5 m.

Code: 0366 Brand: HIRZT - ITALY Model: B 200 - CE Standard Automatic edge bander for pre-glued tapes, for furniture, custom-made furnishings, woodworking shops, panels, doors, kitchens, bathroom furniture, and various - CE Standard Features: Feed track and pressing unit with rubber rollers 70 mm and elipsoidal groovings to ensure a perfect panel feeding Powerful blower equipped with air filter End trimmer by automatic guillotine with free unloading of the exceeding pieces of tape Infeed fence adjustable according to the tape fitness through a four-face stop thickness adjustment Technical data: Panel height 10-40 mm Max edge thickness 0,5-2 mm Trimming motor speed 9000 rpm Trimming cutters diameter 70 mm Adjustable front support Suction inlet diameter 100 mm Installed power 3,2 Kw Compressed air 6 bar Overall dimensions mm 1850 x 900 x 1350 h Weight kg 420  ...

: neu : 2025 : 050141 : prompt, Zwischenverkauf v : Polen : 2821.24 € : 1 : 200 x 32 x 32 mm : 1 kW : 2800 1/min : 42 mm : 470 mm : 250 mm : 1050 mm : 60 kg Quiet running, maintenance-free motor Laterally closed protective hoods Stable, adjustable workpiece supports High safety comfort due to adjustable spark deflectors Suitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc. Motor circuit breaker and undervoltage release Spark/eye protection on both sides Connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine ALTERNATIVES: Version without suction (Art. 317.762) Version without stand, suction and brake/emergancy push button (Art. 317.774) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: ca. 250 mm grinding length: 200 mm centre height: 85 mm total power requirement: kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting hight at 90°: 200 mm; cutting width: 410 mm; miter square horizontal: 45° - 90° - 25°; miter square vertical: 60° - 90° -30°; roller convoyer/ supporting table: no; saw blade diameter: 520 mm; speed: 2800U/min; motor power: 5 kW; motor brake: yes; suction connection: 100mm; machine length: machine width: Gewicht: 300kg; crosscut and miter saw Typ ZS 200 N  compact and clear saw to cut large-format cross section this machine is characterized by following properties: †clarity by cutting process because saw blade arranged above †extremely large cutting area  with a compact and stable structure â€Â powerful 5 kw three-phase motor with automatic star delta start †fast miter adjustment  - horizontal meter range of 45° †90° †25° - vertical meter range of ca. 60° †90° †30° - acu ...

Depth of cut at 90°: 200 mm; Depth of cut at 45°: 140 mm; Cutting width at 90°: 420 mm; Cutting width at 45°: 295 mm; Miter range horizontal: 45° -90° -25°; Miter range vertically: 60° -90° -30°; Sawblade diameter: 520 mm; rpm: 2800 U/min; Motor: 5 kW; motor brake: yes; suction plant diameter: 100 mm; weight: 490 kg; suitable for: wood, PVC, alu cross-cut and mitre saw with maximum cutting height of 200mm stable grey cast iron construction precise ball bearing guide of the tool slide on hardened and ground steel shafts manual saw feed fast mitre adjustment up to 25° horizontal and 30° vertical readjustable fixed stops at 90° and 45° lower saw blade protection can be connected to extraction system machine mounted on mobile machine base with 1.5 m long roller conveyors left and right left side with scale and stop slide

Bread roll system Year of construction 2010 consisting of: Head machine MINI REX Futura Proofer G 2000 with Stüpfler for Kaiser, with long-rolling station

Suction nozzle diameter: 200mm; maximum volume flow: 3200 m³/h; Nominal volume flow: 2262 m³/h; Volume flow monitoring: pressure differential indicator; Negative pressure: 2250 pa; Filter area: 16 m²; Residual dust content: less than 0.1 mg/m³; Sound pressure level: 65 db; Späh bag volume: 320 l; Filter cleaning: pneumatic, jet cleaning; Motor power: 4 kW; Machine length: 2340 mm; Machine width: 880 mm; Machine height: 2190 mm; Weight: 385 kg; The Riedex vacuum dust extractors have been developed for the extraction of wood chips, wood dust and related substances

Suction nozzle diameter: 200mm; maximum volume flow: 3200 m³/h; Nominal volume flow: 2262 m³/h; Volume flow monitoring: pressure differential indicator; Negative pressure: 2250 pa; Filter area: 16 m²; Residual dust content: less than 0.1 mg/m³; Sound pressure level: 65 db; Späh bag volume: 320 l; Filter cleaning: mororic; Motor power: 4 kW; Machine length: 2340 mm; Machine width: 880 mm; Machine height: 2190 mm; Weight: 385 kg; The Riedex vacuum dust collectors have been developed for the extraction of wood chips, wood dust and related substances, but also for

turning diameter: 490 mm turning length: 2000 mm control: Heidenhain MANUALplus 4110 swing diameter over slide rest: 280 mm spindle turning speed range: 1 - 3000 U/min spindle bore: 93 mm rapid power traverse in X-and Z direction: 7 / 10 m/min power capacity: (100/60 % ED) 15/20 kW tailstock quill diameter: 70 mm tailstock quill stroke: 160 mm tailstock quill taper MT: 5 max. workpiece weight between centres: 1000 kg max. workpiece weight -without tailstock: 500 kg weight of the machine ca.: 3,6 t dimensions of the machine ca.: m Features: Control Heidenhain MANUALplus 4110 2 steady rests Manual chuck with jaws Tool holder with inserts The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Türkei : 29990 € : 572.81 € : 0.4 - 3.5 mm : 200 mm : 700 mm² : 80 mm : 75 m/min : 10 m/s² : 10 Nm helical gear boxWATTDRIVE (Made in Austria) FESTO pneumatic equipment servo drive and control SIEMENS 7", colour touchscreen SIEMENS 2 driven rolls OPTIONAL EQUIPMENT Handrwheel and Simlinx remote control € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 340 mm turning length: 575 mm swing dia.: 500 mm X-Axis movement: 215 mm Y-Axis movement: 100 mm Z-Axis movement: 605 mm Minimum indexing C-Axis main Spindle: 0,0001 ° Number of tools on turret: 12 Number of driven tools: 12 x Spindle speed driven tools: 4500 1/min Spindle motor driven tools: 5,5 / 3,7 kW Tool type: Mazak VDI control: Mazatrol Smooth G Main Spindle:: Spindle Speed: 5000 1/min spindle motor: 15/11 kW spindle bore diameter: 76 mm bar capacity: 65 mm 2nd Spindle:: spindle turning speed range: 6000 U/min spindle motor: 7,5 kW spindle bore: 53 mm spindle distance: 575 mm total power requirement: 26,9 kVA Weight: 4,8 t dimensions of the machine ca.: 2,7 x 1,7 x 1,75 m - Mazatrol SmoothG CNC control - Main and counter spindle - 12-station tool turret with driven tools and Y-axis -- Turning Speed: 4500 U/min, 5,5kW - 3-jaw chuck -- Main: 8 -- Counter: 6 - Ch ...

Key data: 200 t

DURENDUS 200 T Workshop Press – Single Column Press – 1,500 mm Clear Width, 400 mm Stroke The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic workshop press for press-fitting, straightening and assembly work in the workshop and industrial sector. Base price: 10.750 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. Table top with X-shaped T-slot 800 × 1,200 × 120 mm Pressure adjustment Lateral displacement of the ...

Table dimensions ( x-y/mm) 5000 x 2500 Slide Dimensions X-Y (mm) 5000 x 2500 Stroke (mm) 1500 Light at T.D.C.(mm) 2000 Shut Height (mm) 500 Accessories shock absorber Cushion number 2 Cushion Area (x-y/mm) 4000 x 1800

Fluid bed manufactured by INOJETT in 2004. Model IEV800-001-2004 Peripherals included: DFO 4-32-R baghouse Air heater Technical characteristics Model IEV800-001-2004 Year of manufacture 2004

Tumbler Henneken -Capacity: 2000L -Dimensions: 2400 x 1500 x 2100 mm -Busch vacuum pump -Made of stainless steel -Condition: Used in very good condition, overhauled, ready to work

Weinig Hydromat 2000 planing line with in and outfeed system, Manufacture year 2008, Consisting of:, - Weinig automatic infeed system High Mech E1, - Weinig moulder Hydromat 2000, - 6 spindles: B-R-L-T-T-B, - feed speed max. 60 m/min, - straight and profile jointers, - Weinig automatic outfeed system High Mech A1

Spiral mixer, Fabr. Diosna, SPV 200 AF/T

A CNC vertical machining center Emco is available. Travel X/Y/Z: 420mm/330mm/400mm, table dimensions X/Y: 650mm/320mm, max. table load: 150kg, tool positions: 12, tool holder: SK40, speed: 4500rpm, rapid traverse: 12m/min. Machine dimensions X/Y/Z: approx. 2400mm/2300mm/2450mm, weight: approx. 2750kg, control: Emcotronic TM02. An on-site inspection is possible.

An Alpha rubber process analyzer for testing the rheological and dynamic properties of elastomers and rubber compounds is available. Frequency range: 0.1-3000cpm, max. temperature: 230°C, max. heating rate: 1°C/s, max. cooling rate: 0.5°C/s, max. strain: +/-90°, test standards: ASTM D5289/D6048/D6204/D6601/D7050/D7605/D8059. Machine dimensions X/Y/Z: approx. 800mm/700mm/1350mm, weight: approx. 200kg. Including PC with Eclipse software and spare parts. Documentation available. On-site inspection possible.

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 130600 € : 2468.34 € : 200 to : 1200 mm : 740 mm : 220 mm : 24 - 140 mm : 50 1/min : 950x600 mm : 100 mm : 390 mm : 15 kW : 2350 mm : 1700 mm : 3435 mm : 14900 kg 8-fold ram guide light guard mot. ram adjustment hyd. overload safety device automatic lubrication according to CE rules user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU309X465 MakeHaagen & Rinau TypeUnimix No.300975/2290 Year of construction1996 Mounted on legscheck Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket4 Bar Main Features MaterialStainless steel Volume2000 Ltr. Motor30 KW Specified Features - Processing vessel Closed stirring vessel3x Capacity3320 l.(2000 l.)/ 2885 l.(1600 l.) /1445 l. (1200 l.) Dished bottomcheck Slope bottomcheck Dished top sidecheck Flat top sidecheck With covercheck ManholeDN400 Top connectionscheck With jacket2x volume 400 l., 165 l. and 95 l. Max. temperature151°C With anchor stirrercheck With paddle stirrercheck With dissolver stirrercheck Motor18kW, 1450 rpm (EX) With homogenisercheck Motor30kW, 2950rpm (EX) MaterialStainless steel 1.4541 (321) Information LocationBarneveld With switchgearcheck ( as is) Floorspace7x2,5 m Total height± 3.8m ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 16100 € : 309.12 € : 2050 mm : 3 mm : 35 1/min : 1.5 ° : 750 mm : 3 kW : 800 mm : 520 mm : 2720 mm : 1575 mm : 1230 mm : 1900 kg The machines feature a robust, welded steel frame for maximum cutting precision Motorized back gauge 750 mm, ball screw spindles, NC control 2 cutting edges on the upper blade and 2 cutting edges on the lower blade 800 mm squaring arm with scale 2 support arms Mechanical downholder Manual cutting gap adjustment on the front Cutting line illumination Foot pedal Emergency stop button Operating manual with EC declaration of conformity. INCLUDES THE FOLLOWING OPTIONAL EQUIPMENT: Blades suitable for cutting stainless steel Rear light barrier protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

used spiral mixer Boku SK 200 A extendable, overhauled, 200 kg dough per kettle, 2 timers, with 1 stainless steel kettle, if required with additional kettles for an additional 4,100€ each, stainless steel spiral, newly painted, clocks renewed, 13.3 kW, 29.8 A, 380 V

Overview  This isobaric maturation tank was manufactured in 2019 by Spadoni. It is designed for the isobaric and isothermal maturation of beverages under pressure, with a working capacity of 1,200L (12 hL) and a total volume of 1,300L (13 hL). The tank is certified up to 3 bar (PED) and equipped with high-quality fittings and insulation. Further information on request. Technical data  Capacity: Working: 1,200 L / 12 hL Total volume: 1,300 L / 13 hL Pressure: Working pressure: 2 bar Shell: 0.49 bar Factory hydraulic test: 2 bar Certified (PED): 3 bar Material: AISI 304 stainless steel Insulation: 80 mm polyurethane foam on cylinder and bottom head, stainless steel covered Finish: Interior: 2B with polished welds Exterior: brushed grain 120 with polished welds Heads: Klopper type (top and bottom) Cooling: Cooling jacket on the cylinder Manway: Isobaric Ø400 mm, pressure-resistant up to  ...

diameter: 200 mm height: 90 mm Pole pitch: Radial Polteilung 4-teili mm total power requirement: 0,048 kW Shipping weight: 30 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 92000 € : 1738.8 € : 200 to : 500 mm : 2.500 x 2.050 mm : 800 mm : 20 mm/s : 2 mm/s : 2950 mm : 2500 mm : 2600 mm : 6500 kg : horizontal verschiebbar : 2050 mm : 1450 mm : 1600 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve The data for this ad was created with ModulMWS - the software sol ...

: neu : ca. 4 Monate ab Auftragse : Italien : 107000 € : 2022.3 € : 200 to : 500 mm : 3.000 x 2.550 mm : 800 mm : 20 mm/s : 2 mm/s : 3550 mm : 3000 mm : 2600 mm : 8500 kg : horizontal verschiebbar : 2550 mm : 1900 mm : 2000 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve The data for this ad was created with ModulMWS - the software so ...

Groninger plastic bottle filling & capping line comprising ZSB 2000 empty bottle unscrambler, DFV 10005Q in-line filling machine with 10 filling stations with cross-feed function, dosing range of 5 to 1000 ml, bottle height from 30 to 250 mm, transport cup dimensions (pucks) 108 x 80 mm and KVK 106 rotary capping machine with 6 capping stations with ZSK 1500 cap sorter and a lift-off conveyor for the transport cups (pucks), capacity up to 150 bottles per minute

Sinmag SM-200S stop machine, new, with boiler and 3 tools, 0.37 kW, 220 V, 50 Hz, year of construction 2021, weight 90 kg, serial no. VDB2102007

Sizing saw Brand Panhans Type: 680 / 200 New machine Basic construction - Solid German machine construction - approx. 1150 kg - Machine body manufactured as a stable welded frame construction from strong-walled steel profiles. - The torsion-resistant and finely planed cast iron table top is mounted on the machine body. - The robust and powerful sawing unit built into the machine body is the guarantor for precise saw cuts. - The complete saw shaft unit is dynamically balanced, double-guided swivel segments made of gray cast iron with double column guide for height adjustment as well as the circular saw shaft with 2 ball bearings ensure absolutely smooth running. Supports and stops - The ball bearing-mounted double roller carriage is smooth-running and maintenance-free. Precise and clearance-free running over the full length, guided with hardened and ground prismatic guides ...

Swivel spindle milling machine Brand: Panhans type: 245/200 New machine Solid 880 kg machine with smart control system - Infinitely variable speed regulation 1500 - 10,000 rpm, - 7.5 kW motor with 11 kW frequency converter - Pushbutton with electronic soft start 7 touch control, optional use, top and bottom - Cutter zero point selectable in program, 3 reference points - Simple operating menu through innovative touch control (max. 2 levels) - Operating hours counter - Warning messages in case of operating errors - Remote maintenance via Internet (VPN tunnel) - USB interface for data backup and import of tools, programs and users - Tool database for 5 tools (20 programs are possible per tool) - 2-axis positioning control for height and swivel adjustment - Electronic position and speed displays Double-sided swiveling, fixed milling spindle for the swiveling range  ...

Turntable diameter: 1650mm, turntable height: 65mm, mast height: 2560mm, max. load capacity: 2000kg, max. pallet dimensions X/Y/Z: approx. 1200mm/1100mm/2400mm. Machine dimensions X/Y/Z: approx. 2600mm/1650mm/2600mm, weight: approx. 550kg. Documentation available. An on-site inspection is possible.

DMG DMC 200 U duoBLOCKYear of manuf. : 2007 Control : Heidenhain iTNC 530 Speed : 12000 rpmMovement X/Y/Z : 1800/2000/1100 mmTool holder : HSK 100 ____________Description:In General:Year of manufacture:2007Control system:Heidenhain iTNC 530Travel distances X/Y/Z:1,800/2,000/1,100 mmRotational speed:12,000 rpmMedia feed-through:Blast air + cooling lubricantSpindle:Technology:Motor spindleSpeed:12,000 rpmPower:44 kWTorque:288 NmTool holder:HSK 100NC swivel head:Technology:Universal milling headB-axis:0°-180°NC rotary table:Technology:Rotary table with pallet carrierC-axis:360°Clamping surface:1,600 x 1,400 mmMax. table load:4,000 kgHolding torque:approx. 17,000 NmTool magazin:Technology:Chain magazineNumber of stations:120Tool changer:Double gripperEquipment:Position sensors:Direct scales in all axesChip disposal:Chip conveyorCoolant supply:Internal c oolant system, 40 barAutomati ...

Auerbach AX TBE 200.1Year of manuf. : 2013 ____________Description:In general:Drilling-ø (max.):3,5 mmDrilling depth (max.):200 mmDeep drilling module:Technology:DrillingspindleSpeed (max.):10.000 rpmPower:3,5 kWTaper:HSK-A40Equipment/Accessory:Chipmanagement:Chip trayCoolingmanagement:Internal cooling unit with Filter and High-pressure, 140 barWorkpiececlamping:Collet chuck, SMW Autoblok KSZ-MB-040-Z140Oilmistseparation:Electrostatic extraction, LTA AC 500Further Accessory:Misc. Single lip driller

SMEC SL 2000 MYear of manuf. : 2023 Control : Siemens 828D - ShopTurn Turning diam. : 360 mmTurning length : 520 mm____________Description:Main spindle:Speed:6,000 rpmPower (max.):18.5 kWBar capacity:52 mmWorkpiece clamping:3-jaw chuck, Samchully MH-206 V1Tool holder:Technology:12-station turretTool holder:BMT55Tool drive:5,000 rpmFeatures/Accessories:Chip management:Chip conveyorCoolant management:IKZ pump with oil skimmer and high pressure, 10 barTool measurement:Automatic measuring armAutomation:PreparedFinished part removal:Parts catcher with collection boxSetup operation:Electronic handwheel

SMEC SL 2000 MYear of manuf. : 2023 Control : Siemens 828D - ShopTurn Turning diam. : 360 mmTurning length : 520 mm____________Description:Main spindle:Speed:6,000 rpmPower (max.):18.5 kWBar capacity:52 mmWorkpiece clamping:3-jaw chuck, Samchully MH-206 V1Tool holder:Technology:12-station turretTool holder:BMT55Tool drive:5,000 rpmFeatures/Accessories:Chip management:Chip conveyorCoolant management:IKZ pump with oil skimmer and high pressure, 10 barTool measurement:Automatic measuring armAutomation:PreparedFinished part removal:Parts catcher with collection boxSetup operation:Electronic handwheel

Index R 200Year of manuf. : 2009 Control : Siemens C200-4D SL ____________Description:In General:Year of construction:2009Control system:Siemens 840 Dsl (C200-4D SL)Bar capacity:65 mmMilling spindles:18,000 rpmMain spindle:Technology:Motorised spindleSpeed:5,000 rpmMax. power:35.5 kWTorque max.:170 NmC-axis:0.001°Z-axis:390 mmBar capacity:65 mmClamping cylinder:Hollow clamping cylinderChuck:3-jaw chuckSub spindle:Technology:Motorised spindleSpeed:5,000 rpmMax. power:35.5 kWTorque max.:170 NmC-axis:0.001°X-axis:600 mmZ-axis:390 mmBar capacity:65 mmChuck:3-jaw chuckTool carrier I:Technology:Milling spindle on cross slideSpeed:18,000 rpmTool holder:HSK 40X-axis:350 mmY-axis:160 mm (+/- 80 mm)B-axis:230°Tool carrier II:Technology:Milling spindle on cross slideSpeed:18,000 rpmTool holder:HSK 40Y-axis:160 mm(+/- 80 mm)B-axis:230°Tool magazin:Technology:Chain magazineNumber of station ...

Size: A3 Equipments: Maximum mechanical speed: 35 cycles/min. Dimensions: 700 x 260 x 30 mm Power specifications: Frequenz: 50 Hz Spannung: 230 V Stromstaerke: 2,5 A

SMEC NS 2000 MYear of manuf. : 2022 Control : Siemens SINUMERIK 828D Turning diam. : 288 mmTurning length : 243 mm____________Description:Work areamax. turning diameter:288mmmax. machining length:243mmX-axis:175mmZ-axis:350mmMain spindleChuck diameter:210mmMax. bar diameter:67mmSpindle bore diameter:76mmDrive power:10.5/20 kWmax. torque:213 NMmax. speed:4,500 rpmTailstockQuill diameter:65mmQuill stroke:80mmAxial force:4,312 NCenter point adapter:MT4Tool turretNumber of tool stations:12Tool holder:BMT45Powered tools:YesMax. speed:5,000 rpm

: gebraucht : 2010 : 080065 : prompt, Zwischenverkauf v : Deutschland : 29800 € : 1 : 2040 mm : 3 mm : 2 mm : 4.5 mm : Motorisch : 1.5 kW : 1.1 kW : 3060 mm : 1650 mm : 1500 mm : 2730 kg : 750 mm : 140 mm : 50 °/sek CNC control ECT (Schneider Magelis) - Input of bending angle, depth stop dimension, lifting height, folding, precut - max. 36 bending angles can be saved per set - max. 510 sets can be saved - comfortable 7.5", color touch TFT monitor - Power mode for material-friendly operation - Soft start of the bending beam and the depth stop - Visual user guidance in the event of faults (diagnosis center) - Selection of different languages such as German, English ... CNC back gauge - Back gauge range 6 - 750 mm - Drive via belt - 6 stop fingers - support plates with brushes Sectioned goose neck rail height 75 mm Additional 10 mm rail on the bening beam Flat rail R 1 mm Flat rail R ...

: neu : ca. 4 Monate ab Auftragse : Italien : 82000 € : 1549.8 € : 200 to : 500 mm : 870x500 mm : 1000x600 mm : 500 mm : 300 mm : 21 mm/s : 3 mm/s : 7.5 kW : 2300 mm : 1500 mm : 3000 mm : 8200 kg 2-fold round guidance table and ram with T-slots 2 hand operation Siemens PLC manometer users manual OPTIONS: Light barrier € on Request Siemens control for programming of stroke and press time € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Deompression valve € on Request Oil cooler with decompreission  ...

We are selling the stock of the soap factory Riesa here In the last picture you will find an overview picture of the production hall with the machine inventory. Here we offer you: 1 palletizing robot 6-axis robot, for payloads up to 165 g, set to Euro pallet dimensions, robot reach 2655 mm, The robot is energized due to programming, installation dimensions 771 x 610 mm, average power 2.5 kW, electrical voltage 380 - 575 V, mechanical protection IP54, wrist and arm protection IP67 The plant was shut down in 2024. Roller conveyor and feed conveyor belt can be purchased for an extra charge

Henkovac TPS 2000 Automatic Traysealer – Excellent Condition – In Stock (Netherlands), We offer a very clean and well-maintained Henkovac TPS 2000 traysealer, equipped with a powerful, 160 m³/h Busch vacuum pump, now available directly from stock at STC Food Solutions in Emmeloord, The Netherlands., This machine has been taken straight out of production, is in excellent working condition, and ready for immediate use., With 1/2 Gastro tooling; 325 x 265 (2x), ---------------------------------------------------------------, Key Features, - High-capacity automatic traysealer for MAP and vacuum packaging, - Equipped with integrated Busch vacuum pump (160 m³/h), - Dual mould system – seal two trays simultaneously for high throughput, - Suitable for a wide range of food products (meat, ready meals, vegetables, etc.), - Quick and easy mould change system, - Transparent cover for excelle ...