tetra pak 200 used for sale

Brembana Helixchanger Heat Exchanger Notified body AIB VINCOTTE Pressure 4/10 bar Capacity 6600/3800L Hydr.press 7,5/14,3 bar

VALOREL Stainless Steel Vessel 620 Ltr. with propeller stirrer, allowed pressure 2,5/-1bar, max. temp 150C , on top there is a inlet 50mm for clamp connection, down outlet valve diameter 2"

A two stage tea and spice mixer Gebrüder Kerner with renewed control circuitry and wiring is available. Volume: 2000l, Material: steel, Drive power: 3.1kW, Control: Siemens. Without stand and feet. An on site inspection is possible.

9 assen: Y1 / Y2 / X / R / Z / V / X1 / X2 / X3 3 CNC-gestuurde frontplaatsteunen Capacity: 2000 ton x 14 meter Backgauge: CNC Control: 2D Touch Passage between uprights: 12470 mm Max stroke: 900 mm Max distance between table -- ram: 1600 mm Depth of throat: 1255 mm Table width: 800 mm Locking speed: 77 mm/sec Working speed: 9 mm/sec Returning speed: 85 mm/sec Electric motor (power): 2x 90 kW Length: 16835 mm Depth: 5695 mm Height: 6750 mm (above floorlevel) Weight: 370 ton Capacity: 2000 ton Bending length: 14 000 mm

The Velati M 2000 twin shaft paddle mixer is a robust and reliable industrial device, specially designed for food processing in commercial kitchens or production facilities. This type of used mixer is characterized by its high capacity and efficiency in mixing a wide variety of ingredients. Thanks to the twin shaft technology, the M 2000 ensures even mixing of the materials while minimizing mixing time. The paddles are designed to ensure optimal mixing without excessive friction, which maintains product quality. The stable construction of the device offers long-lasting performance and lower maintenance requirements. Ideal for use in food processing, this mixer is a valuable addition to any company that requires high-quality and consistent mixes., power: approx.: 1,600 kg mixing volume, Dimensions / weight: Mixer: L x W x H: 4,650 x 1,500 x 1,950 mm, auger: L x W: approx. 5,100 x 2,000 mm ...

High-performance, completely stainless steel automatic grinder for industrial applications., Ideal for meat processing, pet food, and other protein-based products. Available immediately., Used machine from Seydelmann, overhauled in 2025 and not in use since., Largely rust-free, 2-turn working auger, 3-turn feed screw, - With 200 mm diameter perforated discs, - Control cabinet installed, - Dual-stage thermal overload control, 1. Impulse reduces feeder speed, 2. Pulse switches off main motor, - Approx. 400 liter funnel, - Conical feed screw made of stainless steel, Special casting, perpendicular to the working screw, - Solid stainless steel worm housing with hardened running surfaces, - Stainless steel bayonet fitting, - Electrically locked spillage hand guard, - Rocker switch on the top edge of the funnel, - Machine stand closed at the bottom with ventilation system, Three-phase motor IP  ...

Single beam X-ray inspection device,, was used for cylindrical jars and cans,, Capacity: approx. 150 glasses / min,, with ejection of contaminated containers,, with conveyor belt,, in use until 04/2024.

In this case, the containers to be labelled are fed in by hand. The system was used for cylindrical jars with a low height. They are first given a base label from below, turned by 180° using a turning basket, and then given a security seal label from above. The labelled jars then run onto a storage table, offset by 90°.

AUTOMATIC DOUBLE END TENONERS machine model CELASCHI 200 L second hand machine 380/50 volts opening mm. 3000 composed of 3+3 units : 1+1 scoring unit 1+1 hogging unit 1+1 spindle moulder unit electronic opening positioner HF converter separate electrical panel

A four-roll plate bending machine Kramer is available. Working width: 2000mm, max. plate thickness: 3mm, power: 3kW. An on-site inspection is possible.

Used standard trolleys 200 litres Tared 40 kg

turning diameter: 400 mm turning length: 1000 mm control: FAGOR control: CNC 8055/B-T centre height: 200 mm centre distance: 1000 mm turning dia. over face-slide: 210 mm bed width: 300 mm spindle bore: 65 mm spindle turning speed range: 0 - 3000 U/min transmission ratio: 2 feeds - longitudinal: 0 - 10.000 mm/min feeds - cross: 0 - 10.000 mm/min rapid travel - longitudinal/face: 15 m/min tailstock quill diameter: 68 mm tailstock quill stroke: 155 mm tailstock taper MT: 4 total power requirement: 8 kW weight of the machine ca.: t dimensions: 3,1 x 1,9 x 1,78 m Accessories: 3-jaw chuck 200 mmø, MULTIFIX-tool post with various inserts, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC Turning and Milling Center Okuma LT 2000 EX -MY 2pcs Control: OSP-P300L Year of Make: 2013 Turning diameter over bed: 400 mm Center spacing: 960 mm Turning diameter: 210 mm Speed: 50 – 6,000 rpm Sub-spindle speed 50 – 6,000 rpm Travels: W-axis 730 mm X-axis 205 mm C-axis: 360 degrees (0.001) 2 tool turrets with 16 places each (all places driven) Equipment: - Chip conveyors - Paper belt filter system with high-pressure pump - 2x 3-jaw chuck Kitagawa - OGL gantry loader with approx. 5 kg load capacity - Stacking magazine 20 places - Touchsetter - Renishaw touch probe - Extraction system - Various accessories

Manufacturer: Engel Model: ES 200/90 HL Year of Manufacture: 1999 Type of Machine : Injection Moulding Machine Machine Weight: 5,900 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines

Hydropneumatic mode of operation Profile height: 180 mm under hold-down Max. Punch Height: 145 mm Wither height: 150 mm Weight: approx. 400 kg

Hydropneumatic mode of operation Profile height: 180 mm under hold-down Max. Punch Height: 145 mm Wither height: 150 mm Weight: approx. 400 kg

Hydropneumatic mode of operation Profile height: 210 mm under hold-down Max. punching height with 2-way adjustable punching heads: 145 mm Wither height: 150 mm Weight: approx. 400 kg

The Scanima SFM-200 is a simple mixing solution with a compact design at a lower cost for higher capacity production. The powder dissolver secure efficient mixing of liquids, including emulsification. It is also ideal for mixing concentrates and minerals into base concentrates and slurries, for example oils into non fat milk concentrates. The mixers can handle products up to 300 cP. The main product is pumped through the mixer. Additives are pumped into the main stream by the inlet pipe. Mixing then takes place and the blended product passes through the turbo unit for final mixing before it goes to the outfeed. Motor power: 15 kW. Input pressure: - 0,8 / + 1,0 Bar. Input temperature: 0 / + 120 °C. Output pressure: -0 / + 2,0 Bar. Output temperature: 0 / + 120 °C., Additional features:, Excluding:, - Hopper, Type of Machine: Powder dissolver, Capacity: up to 25.000 ltr/h depending on pr ...

Cream separator (Skimmer). Self cleaning. Machine comes with the bowl, motor (37 kW), motor cover, base plate and feet, desludge tank, control panel (original Westfalia), water valves, all inlet/outlet pipes with manometer / flowindicator and service tools for maintenance., Type of Machine: Cream Separator / Skimmer, Capacity: 20.000 liter per hour, Bowl speed: 4.700 rpm, Motor power: 37 kW - 380 V - 72 A - 1.475 rpm - 50 Hz - 3 Ph, Weight: 2.200 kg, Dimensions: 190 x 130 x 225 cm

The Alfa Laval MR-200 Sanitary Self Priming Liquid-ring Pump is a pump specially designed for food, chemical, pharmaceutical and other industries where acid-resistant steel is resistant to the products to be pumped. All products wetted parts, i.e. pump casing, casing cover and impeller are made of acid-resistant steel AlSl 316. Clamp screws and legs are made of stainless steel AlSl 304. lntermediate part is in cast iron which is zinc coated and laquered making it highly corrosion resistant. Motor: 7,5 kW - 380/420 V - 50 Hz - 1.450 rpm - 15,3 A. Impeller diameter: 199 mm. Connections on the inlet / outlet: SMS 76 mm (3). Current maximum capacity (based on the available Alfa Laval performance curves and the current motor): 48.000 ltr/h @ 0 Bar., Type of Machine: Sanitary Self Priming Liquid-ring Pump, Stock Number: 1511, Diameter of the impellor: 199 mm, Motor: 7,5 kW - 380/420 V - 50 Hz  ...

Gear shpping machine LIEBHERR LS 200F.

Gear shapping machine LIEBHERR LFS 200

table length: 2000 mm table width: 1000 mm table height: 900 mm table load: 3000 Kg weight of the machine ca.: 0,45 t dimensions: 2,0 x 1,0 x 0,9 m Welding table / perforated table including accessory set WMT Basic-Set 2.0 The table is made of 25mm high-alloy, plasma-nitrided steel S355J2+N (St 52/3) Surface hardness 850 Vickers Surfaces that have been ground down and planed smooth. Hole diameter: 28mm, countersunk by 3mm 100 x 100mm grid Side panels 200mm Hole spacing in the side panels 50mm, diagonal grid Height adjustable from approx. 830 - 890mm Substructure reinforced with 140 x 15mm flat steel Including base bearings, 110mm diameter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data: - Max. cutting width 2080 mm - Max. cutting capacity at 45 Kp/mm² 6 mm - Column projection 150 mm - Automatic cutting angle adjustment 0.3 - 2 ° - automatic. Cutting gap adjustment - Number of hold-downs 10 pcs - Stroke rate up to 22 1/min - Front angle stop approx. - 2 pcs. front support arms approx. - mot. Back gauge with positioning control up to 1000 mm - Rear space protection with light barrier - Cut line illumination - Working height 860 mm - E - Footswitch - Drive 400 V / 11 kW - Space requirement approx. W 3150 x H 2150 x D 2300 mm - Weight approx. 4.8 t

Key data: 2000 mm, 6 mm, 10 mm

4 ROLL HYDRAULIC PLATE BENDING MACHINE MODEL M2006P _NC EASY COMMAND 15” -MATR. C072/25 MACHINE NEW PLATE BENDING ROLL PLANETARY DESIGN DOUBLE PINCH PRE-BEND BRAND MG SRL ITALY CNC_PROGRAMMABLE AUTOMATIC PLATE ROLLING Capacity: -Width of plate: 2000 mm -Thickness of plate rolling 6 mm -Thickness of plate pre-bending 4 mm Rolls dimensions: -Surface length mm. 2050 -Top roll  mm. 160 - Lower roll  mm. 140 Configuration installed: • Surface hardening of the four rolls, smooth finishing suitable for stainless plates rolling • Dual pre-pinch, plate edges pre-bend automatic programmable • Conical bending hydraulic attachment - hardened contrast pad. • Power driven rolls rotation top/bottom gearbox axial direct drive hydraulic each roll. • Calibration system f ...

New stem radiator for large engines Dimensions : 180 x 900 x 2000 mm Weight : 500 Kg. With fan wheel

Puller for 200cm deep pullers NEUWagen profile 40x40mm screwedExternal dimensions: W: 213cm D: 64cm H: 180/190cmInterior dimensions: W: 203cm D: 64cmSee pictureDo we have various large pullers and pullers in stockDetails see pictures

Spiral mixer extendable Kemper SPA 200Manufacturer : KemperType : SPA 200200 kg flour 320 kg dough2 watchesstainless steel kettle and spiral with 3 extendable kettle 1 kettle has cracksDetails see picture 

Diosna Lifting Kneader D 200 / 2G usedThe Diosna D 200/2G is a powerful kneading machine that is designed for use in bakeries and pastry shops. Â With a boiler volume of 200 liters and a capacity of 2 speeds, the lifting kneader is suitable for the production of dough in large quantities. The robust construction and high-quality materials ensure a reliable and durable machine. With a lifting kneading machine such as the Diosna D 200/2G, high-quality doughs can be kneaded efficiently and evenly. DescriptionLifting kneader Diosna D

used lifting mixer Diosna D 200 / 2GBdescriptionLifting mixer Diosna D 200 / 2G with fixed kettleManufacturer: Diosna Dierks &, Söhne GmbHTyp: D 200 / 2GMit stainless steel kettle and lifting armKettle for max. 200 kg dough or for max. 125 kg flour2 speeds slow and fastMoving on castorsWith 1 timer380 Volt 7.1A 50HzThe Diosna D 200/2G is a powerful kneading machine designed for use in bakeries and confectioneries. With a boiler volume of 200 liters and a capacity of 2 speeds, the lifting kneader is suitable for the production of

Flour mills Rotormat Bio-200Manufacturer : HommelType : Bio-200GRINDING TURBINE ROTORMATTtype:BIO 200Grinding capacity approx. kg/hour fine80 - 100Grinding capacity approx. kg/hour medium120 - 150Grinding capacity approx. kg/hour coarse150 - 200Natural stone:highly wear-resistant200 mm DiameterPower:3 KW 4 PSconnected load:400 VTrichter capacity:approx. 40 kg GrainWeight:approx. 80 kgDimensions cm:100 x 60 x 135Â For details see pictures.

Lifting tipper Kemper HK 200 RD Manufacturer : Kemper Type : HK 200 RD Year of construction : 2011 Tipping height approx. 250cm Dimensions approx. W: 195cm D: 150cm H: 360cm for WP DK 250 Baker's condition Details see picture

ALU Puller with Cloth for 200 cm Deep Stoves NewProduct DescriptionCondition: NewMaterial Puller: AluminumSuitable for 200 cm Deep StovesWith Side FasteningDimensions Puller: Width 58 cm, Length 240 cm, Height 5.6 cmDimensions Cloth: Width 56 cm, Total Length 470 cmDetails see pictures.

Jelly spraying machine - is used - Manufacturer: Bakon - Model: Jelly 2000 M (G) - Year of construction 2004 - Exterior Dimensions W.: 48 cm, D.: 48 cm, H.: approx. 110 cm For details see pictures.

Lifting kneader Diosna D 200 Plus Description Lifting kneader Diosna D 200 Plus with fixed boiler Manufacturer: Diosna Dierks &, Söhne GmbH Type: D 200 Plus Condition: revised and repainted With stainless steel kettle Kettle for max. 200 kg dough or for max. 125 kg flour 2 speeds slow and fast With flour dust cover Mobile on casters Machine completely repainted With stainless steel control box With 1 timer NEW Many parts renewed Boiler polished 380 Volt 

Rego SM 2000 Automatic Stop Machine / Stirring Machine Product description: âœ" Condition: used, tested, baker's condition âœ" Manufacturer: RMT - Rego GmbH âœ" Type: SM 2000 âœ" Year of construction: 1996 âœ" Power (kW): 1.68 âœ" Volt: 400 âœ" Amp.: 8.13 âœ" incl. 1 stainless steel kettle and 1 whisk âœ" electrically driven height-adjustable kettle Details see pictures

Baking gloves 2Â pair up to 200ËšC- max. 350ËšCProfessional gloves for the bakerBaking gloves made of plush handlesOperating temperature 200ËšC -max. 350ËšC (short-term)Weight 348g325x150mm, short cuffDetails see picture

Baking gloves 2Â pairs (4 pieces)Professional gloves for bakerOperating temperature 100ËšC -max. 200ËšC (short-term)Weight 300g450x150mm, with stiles made of linen fabricSpecial cotton fabric MittensDetails see picture

(2 pairs) Oven gloves Baker's gloves Heat-resistant +200 Âcf glove with cuff made of linen fabric grey, heat-resistant up to +200 Âcnot machine washable, approx. 36 cm long, 1 pair We have a larger number in stockDetails see picture

Pullers ALU for 200cm deep furnace NEWAductors made of ALUApullers for 200cm deep furnacePullers dimensions: W: 240cm D: 58cmDo we have various large pullers in stockDetails see picture 

Pullers with puller carriage for 200cm deep furnace NEWThe puller trolley stainless steel with 10 ALU pullerson rollersTrolley profile 40x40mm screwedOuter dimensions: W: 251cm D: 64cm H: 184cmInternal dimensions: W: 243cm D: 64cm10 pieces Pullers made of ALUAductors for 200cm deep furnacePuller dimensions: B: 240cm T: 58cmSee pictureDo we have various large pullers in stockDetails see picture 

Cake ring made of aluminium à ̃ x H: 200 x 60 mm NEW ( 10 pieces )Dimensions: à ̃ x H: 200 x 60 mmMaterial thickness: 2.0 mmDetails see picture

pressure: 200 t nominal power: 2000 kN stroke length max.: 1700 mm working feed: 50 mm/sec weight of tools max.: 50000 kg voltage: 400 V table-size: 4.800 x 2.400 mm total power requirement: 99 kW weight of the machine ca.: 113 t dimensions of the machine ca.: m passage width: mm stroke: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A manual screen printing machine Eickmeyer is available. Material thickness range: 2mm-25mm, max. printing dimensions X/Y: 1700mm/700mm, machine dimensions X/Y/Z: approx. 2650mm/2100mm/1500mm. An on-site inspection is possible.

Key data: 200 t, 80 mm

Inv. Num. : 9036 Type: 200 T Producer: ROSS Created: 2003 Parameters: Control system: DIMECO MCU 24 Compressive force: 200 t Table length: 2100 mm Table width: 1000 mm Stroke: 80 mm Adjusting the ram: 150 mm Machine weight: 36700 kg

An almost like-new and high-precision CNC centerless grinding machine Monzesi is available. Grinding wheel outer diameter min./max.: 406mm/280mm, inner diameter: 152mm, max. width: 200mm, speed: 2100rpm, power: 11kW. Regulating wheel outer diameter min./max.: 160mm/254mm, inner diameter: 115mm, max. width: 200mm, speed: 285rpm. Workpiece diameter: 100mm, workpiece length: 200mm, regulating wheel axial adjustment: +/-10mm, taper setting: -2°/6°, tilt adjustment: +/-5°, accuracy: 0.0001mm. Machine dimensions X/Y/Z: approx. 3800mm/2000mm/21500mm, weight: approx. 4500kg, control: CNC Fanuc 35i-B Digital, operating hours April/2026: 481h. Documentation available. An on-site inspection is possible. Expected to be available from end of July/August 2026.