127,861 used machines on RESALE, but how to find them? Machine Search
capacity 90 degrees: round: 255 mm capacity 90 degrees: square: 240 mm : 300 x 180 saw band length: 2.765 x 27 x 0,9 mm mm table height: 950 mm band speed: 18 - 110 m/min total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,42 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 255 mm capacity 90 degrees: square: 240 mm : 300 x 180 saw band length: 2.765 x 27 x 0,9 mm mm table height: 950 mm band speed: 35 + 70 m/min total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,42 t dimensions of the machine ca.: 1,23 x 1,7 x 1,75 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Reducer Concentric AGRU/TRACEABILITY 250/160 SDR 1
Pressure booster system, dry rotor pump heating pump centrifugal pump, water pump, inline pump used 2 pumps Manufacturer: Grundfos Type TP 150-250/4 A-F-A-BQQE Q 2x 295 m³/h at 20.4 m 16 bar 120°C 22 kW with pump control 96754726 Dimensions approx. 2500 x 1300 x 1600 mm All articles are checked for function before delivery, if technically possible! Changes and errors in the technical data, information and prices as well as prior sale reserved.
Key data: 1000 , 89 , 30
In our stock in Wellingborough, Northamptonshire is this fully refurbished Arburg 420C 1000 – 250 VU injection moulding machine with vertical clamp and injection. Ideal for insert moulding as an operator can easily and ergonomically load inserts. The vertical clamp means inserts are more likely to stay in place. This machine has a 30mm plasticising unit which gives a maximum shot weight of 89 (PS) (g). As you’d expect from us, this machine has been fully refurbished and is now completely fault & leak free. With low lifetime hours of only 23k, it really is in excellent condition throughout. The plasticising unit is holding max pressure throughout the range, the pump is quiet, the platens are in great order and we’ve done great work with the general cosmetics. Machine is now available for a full demonstration as and when required. Refurbished machines from STV Machinery undergo a ...
Warehouse number: 3691 CNC ROTARY TABLE Manufacturer: Hydex, Type: AT-250 - 5 Axis Year of construction: 2022 Specifications: Table size 250 mm Center Height 320 Spindle hole 75H7 mm CNC control 2 ashes revolutions 50 per min Control Fanuc-Mitsubishi-Siemens-Heidenhain
Inv. Num. : 5698 Type: LKT 250 Producer: METALPRESS Created: 1974, GO 2002 Parameters: Compressive force: 250 t Table length: 1150 mm Top table width: 1580 mm Maximum stroke rate top table: 7-25 1/min Ram stroke: 250 mm Adjusting the plunger: 100 mm Machine weight: 22950 kg GO 2002: converted to hydraulic clutch electronic control
Main features : Manufacturer - Spain; The machine is made of 18/8 stainless steel with an anodized aluminum casing; Hardened and chrome-plated cutting disc made in Germany; Automatic sharpening device; Motor cooling fan; Guard for the cutting disc; Cutting thickness: 0÷16mm.; Maximum dimensions of the product for cutting – 270×140mm.; Maximum thickness of the product for cutting – Ø170mm.; Diameter of the cutting disc – Ø250mm.; Power: 0.33 hp; Dimensions: 590/700/425mm.; Weight: 28 kg.;
Key data: 200 KW, 250 kVA, 400 V
Generator Set Specifications: Model: EQ-I250200 Primary power: 250 kVA / 200 kW Standby power: 275 kVA / 220 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm (revolutions per minute) Engine Specifications: Engine brand: Iveco Engine Model: NEF67TE8P Bore x Stroke (mm): 104 x 132 Displacement (L): 6.7 Compression ratio: 17:1 Induction: Turbocharged & Intercooler (or Aftercooler) Fuel System: Inline (Series) Regulator Type: Mechanical Dimensions of the generator set (closed): Length: 3770 mm Width: 1350 mm Height: 2370 mm Weight Open: 2790 kg (Note: Here it says "Weight Open" despite the heading "Dimensions of the generator set (Closed)". I left it as it is in the original.) Standard features: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford alternator ABB Circuit Breakers Manual operation protection system Flexible oil l ...
DURMA MS 2504 mechanical guillotine shears were built in 2014 in Turkey by DURMAZLAR MAKİNA SANAYİ ve TİCARET A.Ş. The machine, designed for precision cutting of workpieces with a maximum thickness of 4 mm, offers high reliability, precision and efficiency. Sheets made of among others stainless steel, copper or aluminium, are machined using high-quality cutting knives with adjustable gap between blades. Daily operation of the machine, on the other hand, is facilitated by the convenient foot switch and intuitive NC control. The DURMA guillotine shears weight 3230 kg. Technical specifications of the DURMA MS 2504 guillotine shears - NC control - maximum sheet metal length: 2550 mm - maximum sheet metal thickness: 4 mm - cutting angle: 1°30′ - number of strokes: 42/min - back stop stroke: 1000 mm - foot switch control - motor power: 7.5 kW - power supply: 3x 400 V; 50 Hz ...
Corundum stone mill + excenter screw pump + vessel Corundum stone mill Manufacturer: Fryma Type: MK-250 Year of construction: 1995 No.: M16732 Pressure working space: 4 bar Pressure double jacket: 6 bar Power: 18.5 kW with double jacket & double-acting mechanical seal with switchgear with outlet chute with grinding gap adjustment with pressure gauge with sight glass Excenter screw pump Manufacturer: Netzsch Type: NL 30 A Year of construction: 1995 Power: 1.1 kW Vessel LBH volume: 750 x 750 x 650 mm System on movable stainless steel frame LWH: 1500 x 700 x 1650 mm
I sell a double end cutting and milling machine FRIULMAC IDRAMAT, built in 2007. Working width up to 2500mm Configuration left side / fix: 1 + 1 pcs. cutting units top + bottom / 3.0 + 3.0 KW 1 + 1 pcs. groove saw units front + rear with jump Configuration right side / movable: 1 + 1 pcs. cutting units top + bottom / 3.0 + 3.0 KW 1 pcs. special milling unit on top / 5.5 KW Material pressure band with support from above. Special design, also suitable for side dimensioning. Continuous machine. Siemens Simantic control panel. Condition Very good. Available the same.
diameter: 250 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Machine type MIG/MAG welding system equipped for steel wire in 1.0 mm Rehm brand Type RD 250 Connection voltage 3 x 400 Volt Setting range 35 – 250 amps Duty cycle 40 % ED at 250 Ampere 60% ED at 210 amps 100% ED at 170 amps Current setting 10 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed gearbox 4-roller drive Fuse 16 amps Dimensions L x W x H 900 x 465 x 855 mm Weight 81 kg Age approx. 15 years Condition workshop tested, good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll welding wire D 300, 5 kg 1 piece hand shield 1 piece attachment glass 90 x 110 mm white 1 piece of protective glass 90 x 11 ...
Marble plate STOLLE Length: 3500 mm Width: 2500 mm Thickness: 305 mm Height on feet: 900 mm Delivered with 12 levelling feet Weight: 6,3 T
Schaudt ZX11 - Premium Overhauled [RETROFIT] - CNC grinding machine for individual requirements - Tip height: 180 / 250 mm - Grinding length: 2,500 mm - Control: Siemens Sinumerik ONE or Fanuc - Workpiece weight: approx. 600kg - Workpiece headstock: MK5 - Tailstock: MK5 - Installation dimensions: approx. 7,200x2,600 mm Options: (other options also possible) - Balancing & grinding sensors - In-process measuring device for length & Ø - Dressing spindle for diaform roller - B-axis for swivelling grinding headstock - Internal loop device - Upgrade to non-circular & thread grinding - Automatic door drive - suitable automation - Peak increase - u.v.m. on request / customer request
Water pump Sludge pump / excavator pump Manufacturer : Habermann Model : KB 250 S III The pump is revised and in perfect condition for more information see pictures. Internal number: 601 979
For sale renewd shredder made by HOMBACK with 250kw. Used for shredding wood in long till chipwood.
Machine Details Warehouse number 1105-03719 Machine type CNC lathe - inclined bed machine Brand KITAMURA Type KNC 250 YS Year of construction 1999 Control type CNC Control Fanuc 18 IT Storage location FRANCE Country of origin JAPAN Delivery time IMMEDIATELY Freight base from stock HAGUENAU FRANCE Technical details Turning diameter 280 mm Turning length 270 mm Control Fanuc 18 IT Rod passage: 42 mm Speed range - spindle 5000 rpm Feed range - turret / infinitely variable 1 - 12000 mm/min Rapid traverses 20 / 24 m/min Number of tool turrets: 1 piece Tool turret - seats: 12 stations Tool holder direct holder Total power requirement 20 kW Machine weight approx. 4.5 t Space requirement approx. 2900x2100x1800 mm Accessories 3 - Baking - Food YES Complete machine documentation YES Chip conveyor YES Parts catcher YES Collet device YES Electronic handwheel YES Co ...
Key data: 250 , 4 , 45
Electr. Power: 250 KW Motor speed:1492 rpm Voltage: 400 V Weight: 5630 kg The compressors have been taken over in operational condition and are complete.
NAKAMURA WT 250 CNC Fanuc, Series 16i-T Main spindle, counter spindle 1 tool turret with driven tool stations + 1x Y-axis 1 tool turret with driven tool stations 2x C-axis Conveyor Bar loading magazine IEMCA TS560P The machine is energized in our warehouse in Gussago BS.
Main spindle control, RAC 2.3-250-380-A-00-W1, Indramat Bosch Rexroth, used Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used! The high quality part comes from a spare parts stock of a mechanical processing of a large automotive manufacturer. The main spindle control was repaired by Bosch Rexroth. Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.
; Gross weight [kg]: 5230; Engine: Perkins 2506A-E15TAG1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 775
STROJARNE PIESOK NTC 2500/4 guillotine shears were built in 1985 in Czechoslovakia. The machine, distinguished by its extremely sturdy design, is used for cutting sheet metal with a maximum thickness of 4 mm. The machining process is performed by high-quality cutting blades with an electrically adjustable gap between the blades. The NTC 2500/4 guillotine shears weighs approximately 3800 kg. Technical specifications of the STROJARNE PIESOK NTC 2500/4 guillotine shears - maximum sheet metal thickness (Rm=450 MPa): 4 mm - minimum sheet metal thickness: 0.6 mm - maximum sheet metal length: 2500 mm - cutting angle: 1°33′ - reach: 200 mm - back stop stroke: 4-750 mm - back stop drive: electric - back stop motor power: 0,25 kW - main motor power: 4 kW - installed power: 6.5 kVA - power supply: 3x 380 V; 50 Hz - dimensions (L x W x H): 3100 x 1600 x 1500 mm - weight of the mac ...
; Gross weight [kg]: 5395; Engine: Perkins 2506C-E1STAG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 775
Machine Details Stock number 1105-03758 Machine type CNC lathe - inclined bed machine Brand MORI SEIKI Model SL 250 BMC Year of construction 1999 Control type CNC Control FANUC MSC 503 Storage location FRANCE Country of origin Japan Delivery time immediately Freight base EXW (Incoterms 2000) free Technical details Turning diameter 356 mm Turning length 500 mm Control FANUC MSC 503 Turning diameter over bed 520 mm Turning diameter above the paddling carriage 275 mm Center width 525 mm Travel - x 260 mm Travel - z 550 mm Spindle speeds 42 - 4000 rpm Spindle bore 85 mm Turret head (x-fold) 12-fold Shank cross-section 25 Shank diameter 50 mm Rapid traverse longitudinal 15000 mm/min Rapid traverse plan 12000 m/min tailstock stroke 491 mm Motor power 15 / 11 kW Total power requirement 30 kW Machine weight ca. 5.5 t Information VERY well maintained machine wit ...
Graule AKF 6/250 - Year of construction 1999 - Engine brake - very good condition - technically tested and fully functional
Here, you will find no hidden costs. The advertisement concerns the basic version of the machine. All optional extras and their prices can be seen on the received sales quote or by contacting our specialist. We always present the final amount to be paid on sales quotes if the contract is signed within the quote valid period. We always evaluate transport costs from our warehouse in Poland. QC12Y 6x2500 SMO-2506-N Hydraulic press brake Specifications - Maximum thickness mild steel (PN-EN S235): up to 6.0 mm - Maximum working length: 2500 mm - Cutting angle: 0.5 - 2.5° - Strokes/minute: 18 - Backgauge retract distance: 600 mm - Motor power: 7.5 kW - Length: 3200 mm - Width: 1700 mm - Height: 1850 mm - Total mass: 3800.0 kg Equipment - Backgauge powered by an electric motor (on ball screws) - Hydraulic sheet metal clamping over the entire working length - Blade cl ...
LS8 2500 knotted mesh production machine was built in 2016 in Poland by Maszyny S.C. The machine is used in the efficient production of durable and damage-resistant L-, M-, S- and SL-type mesh. The entire production process, from wire feeding to net braiding, is performed fully automatically. The fixed knot fence production line weighs 2600 kg. Technical specifications of the LS8 2500 knotted mesh production machine - type of produced net : L, M, S, SL - maximum height of the produced net: 225 cm - horizontal wires spacing: 15 or 30 cm - number of horizontal wires: 26 pcs. - edge wires diameter range: 1.8-3 mm - inner wires diameter range: 1.5-2.5 mm - edge wires maximum stress: Rm=1200 MPa - horizontal wires maximum stress: Rm=450 or 1150-1200 MPa - vertical wires maximum stress: Rm=450-500 MPa - power: 11 kW - pneumatic pressure: 0.6 MPa - power supply: 3x 400 V; 50 Hz ...
Sell Vacuum pump used Type: Busch 250-138, Vacuum: 20 mbar, Motor Oil: Type SAE30, Engine: Delfin, Year of manuf.: 2012, Power 3,45 kW, 230 volts, 15 A,
Key data: 600 , 172 , 40
Manufacturer: Arburg Type: 370 C 600 - 250 Year of production: 2004 Control: Selogica Closing type: Hydraulic Closing force: 600 kN Tie bar spacing: 370 mm x 370 mm Plate size: 570 mm x 570 mm Tool height: min 250 mm Opening distance: 500 mm Max distance between plates: 750 mm Screw: 40 mm Stroke volume: 188 ccm / 172 gram PS Injection pressure: 1390 bar General Motor: 11 kW Heating: 5,5 kW Dimensions: 4,2 m x 1,5 m x 1,7 Weight: 3400 kg Screen text: German
Key data: 500 , 132 , 35
Manufacturer: Arburg Type: 320 C 500 - 250 Year of production: 2002 Control: Selogica Closing type: Hydraulic Closing force: 500 kN Tie bar spacing: 320 mm x 320 mm Plate size: 446 mm x 446 mm Tool height: min 200 mm Opening distance: 350 mm Max distance between plates: 550 mm Screw: 35 mm Stroke volume: 144 ccm / 132 gram PS Injection pressure: 1820 bar General Motor: 15 kW Heating: 6,5 kW Dimensions: 3,4 m x 1,4 m x 1,7 m Weight: 2830 kg Screen text: German Additional equipment Robot interface Core pull hydraulic: x1
Technical data for the shelf connector: Shelving system: Dexion Type: P 90 The scope of delivery includes: 01x Shelf connector, used for shelf spacing: 250 mm Cross-section: U 50x25 mm Material color: sendz. galvanized Weight: 0,29 kg | Pcs.
The scope of delivery includes: 01x Shelf connector, used for shelf spacing: approx. 250 mm Total length: approx. 330 mm Cross-section: U 30 x 52 mm Material color: blue Weight: 0,46 kg | Pcs.
CNC controller: SIEMENS SINUMERIK 840D-ERGOLINE Capacity X-axis travel mm: 725 Y-axis travel mm: ± 50 Z-axis travel mm: 300 Turning length mm: 160 Max. turning diameter mm: ø: 250 Swing over bed mm: ø: 320 Tool magazine Magazine places: 16 Tool holder: VDI-30 Tool length max. mm: 390 Tool diameter max. mm: 140 Lower turret Number of tool slots St .: 12 Speed driven tools RPM: 4.000 Drive power driven tools kW: 11,7 Milling function: Yes Main spindle Speed spindle rpm: 5.000 Drive power spindle kW: 11,7 (40% ED) Maximun torque Nm: 280 / 360 (100% / 40% ED) Coolant system Tank capacity liter: 980 L High-pressure bar: 8 / 20 Equipment Chip conveyor CE conformity Coolant gun Air blast / coolant switch-over Internal coolant supply Paper band filter Automatic workpiece magazine loader - 16 positions x ø 220 Working time hours ...
Engine serial nr.: NYJ00480, Generator set serial nr.: K7F00641, Generator serial nr.: 74B0080; Gross weight [kg]: 16080; Engine: Caterpillar 3516B; Accessories: Control Panel
Turbulent mixer / paddle dryer Manufacturer : Drais Volume : 2500 ltr. Material : wetted areas in stainless steel Drive : 57 / 40 KW Operating pressure : 5 bar Electr. Power supply : 380 V / 50 Hz; --> Machine with extendable mixing unit.
The scope of delivery includes: 01x Shelf connector, used ( for lateral attachment to the shelf stand ) Manufacturer: Jung Heinrich Type: Esmena Material color: sendz. galvanized for shelf spacing: approx. 250 mm L – Profile: 85 x 40 mm Weight: 0,68 kg | Pcs.
Double Z kneader / Sigma kneader Topos Used Double Z Kneader Topos 250 L – Sigma Kneader – - Kettle Kneader – Dough Kneader - Industrial Kneading Machine – Stainless Steel – Overhauled and Function Tested Robust stainless steel construction, powerful drive, ready for immediate use. The Topos double Z-mixer with a usable volume of 250 litres is a robust and powerful industrial machine for highly viscous mixing and kneading processes. Thanks to its solid kneading arms, it ensures even mixing of viscous media and doughs. Industrial materials such as doughs, sealants, paints, adhesives, raw ceramics or chemical mixes. The machine was designed for continuous industrial use and impresses with its stable design, durable design and easy-to-clean stainless steel design. - Make Topos, built around 1965 - Completely overhauled in 2018. Function-tested. - Easy ope ...
Spiral kneader Kemper SP 250 A for max 400kg dough Spiral kneader Kemper SP 250 A with 2 stainless steel boilers, functionally tested and cleaned immediately available for sale in stock. The machine is equipped with 2 speeds and automatic timer. The boiler and the mixing tool are made of stainless steel. Optionally available with up to 8 boilers. -Kemper spiral kneader extendable -2 automatic timers -2 speeds -for max. 250kg flour / max. 400kg dough -with flour dust cover -with 2 boilers (optional with more boiler) -Stainless steel boiler, spiral and guide rod -380 volts 50Hz
Max diam 250 , max lenght 2000, 3 x heads , change gears
Reference ID PP-53278 Category Flatbed Die Cutter Manufacturer Wook Model WTNS-2500 SF Year Built 2008 Color- Impression- Working Hours - Speed 1600 sheets/h Max. size 2500 x 1500 mm Min. Size - Condition Good Location Europe Availability Immediately Machine Description Maximum die-cutting pressure: 600 tons Power supply: 400V, 50Hz Prefeeder, fully automatic Brand: HF technology Model: MFS 2500 HBL, Model 2516 Maximum sheet size: 2500 x 1650 mm Minimum sheet size: 600 x 450 mm Maximum speed: 13,200 sheets/hour Maximum stack height: 2400 mm (minimum 500 mm) Maximum stack weight: 2000 kg Power supply: 400V, 50Hz Year of manufacture: 2011
maximum number of results exceeded
please refine your search
