137,086 used machines on RESALE, but how to find them? Machine Search
The AUTO 3 PTZ decay test instruments are equipped in full compliance with the requirements of the USP <701/2040> and EP <2.9.1/2.9.2.1> pharmacopoeias. A large 320x240 pixel LCD display and alphanumeric keypad allow product and test information to be changed, such as the decay time for each station, bath and medium temperature. The total test time for the station is displayed at the end of a run. The operator intervention to stop a run is also displayed. Print the individual decay time of each sample when you have visually detected the disintegration of the sample under test by simply pressing the corresponding character key (1-6). All this information can be printed as a test report when a PCL printer is connected to the parallel printer port of the instruments. Built-in heating system uses a quiet circulation pump and heating element to preheat the outdoor water bath over ...
Vötsch VTR 7033/S Temperature Test Chamber Manufacturer: Vötsch Type: VTR 7033/S Item No.: 60885637 Temperature cabinet Temp. range: -70°C to +180°C Mains voltage:400V Rated Current:24A Rated power: 9.5 kW Refrigerant VK: R 404 A Refrigerant TK: R 23 Year of Make: 1998 TK 09 More items - new and used - can be found in our shop! International shipping costs on request!
Vötsch VCS 4100 Climatic Test Chamber - 40 °C to + 180 °C Manufacturer: Vötsch Type: VCS 4100 Temp. range: - 40 °C to + 180 C Mains voltage: 400 V Rated current: 17 A Rated power: 11 kW Refrigerant: R404A KK-07 More items - new and used - can be found in our shop! International shipping costs on request!
Stock number: D540, In stock: Yes, Amount in stock: 1 pc., Item: Lab. spray tester
Sold without mains power supply Auction-ID: A1-51267-5244
Vötsch VTR 7033/S Temperature Test Chamber Manufacturer: Vötsch Type: VTR 7033/S Item No.: 60885637 Temperature cabinet Temp. range: -70°C to +180°C Mains voltage:400V Rated Current:24A Rated power: 9.5 kW Refrigerant VK: R 404 A Refrigerant TK: R 23 Year of Make: 1997 TK 08 More items - new and used - can be found in our shop! International shipping costs on request!
diameter:500 mm workpiece weight:30 kg test dia. min.:200 mm total power requirement:0,03 kW weight of the machine ca.:1000 kg dimensions of the machine ca.:1x0,5x1,06 m
Vötsch VTR 7033/S Temperature Test Chamber Manufacturer: Vötsch Type: VTR 7033/S Item No.: 60885637 Temperature cabinet Temp. range: -70°C to +180°C Mains voltage:400V Rated Current:24A Rated power: 9.5 kW Refrigerant VK: R 404 A Refrigerant TK: R 23 Year of Make: 1996 TK 07 More items - new and used - can be found in our shop! International shipping costs on request!
Andreas Schmid Climatic Test Chamber -40°C to +130°C Manufacturer: Andreas Schmid Type: VKT 3,000 /-40/+130 Temp. range: -40°C to +130°C Program controller: Stange SE - 502 Mains voltage: 400 V Rated current: 32 A Refrigerant: R 404 A / R 23 Year of Make: 2005 External dimensions: W 1600 x D 800 x H 2430 mm TK-16 More items - new and used - can be found in our shop! International shipping costs on request!
Hydr. Spotting press MILLUTENSIL type BV 25 PMMasch. No. 632 / 25111 Year of construction 1991Clamping force 18 ton. Opening force 15 ton. Table surface 775 x 760 mm Clamping surface of the upper table 900 x 550 mmStand width 900 mmInstallation height max. 750 mmInstallation height min. 230 mmStroke of the upper table 520 mmLifting speed stepless 0 - 1000 mm/min. Hydraulic pressure adjustable 10 - 200 barTool weight on the table max. 2500 kgTool weight on the upper table max. 800 kgTable height
max. wheel diameter: 400 mm gear width: NA mm max. module: 5 min. module: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Manual Two Flank Gear Tester The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Traction test Avery Denison T42 50 tons low price - ideal for retrofit The machine is visible in our warehouse in Gussago BS. Mimu Machine Tools
max. wheel diameter: NA mm gear width: NA mm max. module: min. module: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Manually operated 2-Flank Gear Tester The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: 500 mm Hypoid adjustment: ±70 mm axial cross angle: 90 ° Distance Y-: 150 - 350 mm Distance Z-axis: 120 - 340 mm turning speed range - stepless: 0 - 5000 U/min max. torque on the spindle: 57 Nm Cone: 99,2 mm Pull-in force Tool clamping: 23000 N Braking torque max.: 93 Nm total connected load: 20 kVA total power requirement: 15 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 2,35 x 2,24 x 2,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Test force: -- kN Dimensions (HxWxD): -- mm weight: 76 kg Condition: Used, ready for use Specification: Mitutoyo image processing and profile measuring device Type: Quick Scope QS-250Z 1J - Used The Quick Scope QS-250Z is used to measure: - Outer diameter - Inner diameter - Distance measurement - Parallelism - Angularity The device was used in quality assurance in a single-shift operation. Technical data: - Measuring range: X = 200 mm, Y = 250 mm, Z = 100 mm - Accuracy: 5 µ / resolution 0.5 µm - Image capture unit: 1/3 CCD color camera - Travel speed max.: 80 mm/s - Acceleration max.: 250 mm/s² - Table dimensions: 269 x 311 mm Lighting: - Transmitted light: 12V / 30W halogen - Coaxial incident light: 12V / 50W halogen - Fiber optic ring light: 12V / 100W halogen Software: QSPAK Version 3.1 Operating system: Win10pro Workpiece weight: max. 10 kg Weight: ...
Heraeus Weathering Tester Xenotest 1200 CPS Xenon device for testing the lightfastness and weathering resistance of materials under simulated conditions Electrical connector Voltage: 400 V Rated current: 50 A max. Connected load: 33 kVA max. Cable intake of the xenon emitters: 2.8 - 6 kW per emitter Compensation: 3 capacitor a 50 uF Hours: 3888 More items - new and used - can be found in our shop! International shipping costs on request!
EyeSys System 2000 Corneal Analysis System The EyeSys 2000 Corneal Analysis System is designed to provide unmatched performance, accuracy, ease of use, and affordability with these key features: Optimal central and peripheral corneal coverage provides complete information for the entire cornea Automatic calibration and automatic data correction ensure greater accuracy of topographic data. Automatic focusing and simple examination paths improve ease of use, speed up the examination process and virtually eliminate all focus differences between operators. Advanced software applications include primary care, co-management, corneal surgery, and contact lens fitting. The unique and patented three-camera technology provides a side-view image of your patient's cornea and enables the use of true aspherical image processing algorithms. Simultaneous positioning of the patient and opera ...
Weiss Climate Test Chamber with Seat Pulsator Manufacturer: Weiss Type: SD 1400/+20 DU Test chamber: Material: Stainless Steel Dimensions Height approx. 800 mm Width approx. 2000 mm Depth approx. 900 mm Capacity: 1440 litres Outer housing Material: double-coated zincor sheet Dimensions Height approx. 2000 mm Width approx. 2200 mm Depth approx. 2000 mm HxWxD 2000 x 2200 x 2000 mm Paintwork: light grey (RAL 9002) Door, double-leafed: hinged left and right Equipment: Feed-through in floor and ceiling: 2 pieces each, NW 100 mm, for inserting the pulsating tables Feed-through in the side walls: 1 piece each, left, right, 100 mm Refrigeration unit: air-cooled Control: Digital measurement and control system DMR Basic control panel: integrated in the main switch panel Interface: RS 232 C, for connection to a PC Software: Opera ...
max. wheel diameter: 400 mm gear width: mm max. module: Control: total power requirement: kW weight of the machine ca.: 4 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A bevel gear rolling test machine Gleason is available. Workpiece diameter: 330mm, max. center distance: 203mm, driver spindle nose distance range: 100mm-250mm, max. offset range upper/lower: 203mm/50mm, driver spindle bore: 99mm, driver spindle taper per meter: 15.5mm/m, counter spindle bore: 58mm, counter spindle taper per meter: 12.7mm/m, spindle speed: 1500rpm, test angle range: 0°-180°, driver spindle repeatability: +/-0.004mm, runout: +/-0.003mm, machine dimensions X/Y: approx. 1550mm/2050mm, weight: approx. 2400kg. An on-site inspection is possible.
Manufacturer: Rasco Model: SO1800T Year of Manufacture: 2007 Power Supply: - 400V 3 / N / PE - 208V 3 / PE - 230V 1 / N / PE - 50–60 Hz - 6 kW Air Supply: 6 to 10 bar Exterior Dimensions: - Width: 37.008 in (94.0 cm) - Depth: 43.307 in (110.0 cm) - Height: 88.583 in (225.0 cm) Weight: 871 lb (395 kg) Find more here - .ucymachines/ Contact us at - sales@ucymachines
Laboratory Furnace for Bending Test 120 kW Kiln 900 °C Chamber Furnace 2 bending chambers Ceiling height adjustment Temperature range: max. approx. 900 C Additional heating Control cabinet PC, Fabr. HP, Intel Core 2 Duo Voltage: 400 volts Power: 120 kW Year of Make: 2015 Antechamber Width: 900 mm Height: 300 mm Depth: 580 mm Bending chamber Width: 520 mm Height: 115 mm Depth: 550 mm More items - new and used - can be found in our shop! International shipping costs on request!
General SKU429T1358 MakeBrabender OHG Duisburg TypePlasti-Corder PL2000, Eurotherm Type 808 No.814 300 LocationBarneveld Main Features Inlet diameter15 mm L/D25 Specified Features - Viscosity test machine Single screw extruder(and with double) Screw diameter± dia.15 mm L/D± 25 Number of heating zones:1 With jacketcheck Air coolingcheck Inlet± Ø 15 mm Feeding with hoppercheck Max. temperature500 °C With jacketcheck Viscosity test machines MaterialStainless steel General Floorspace1,45x0,55 m Total height0,8 m Weight280 kg Extra information Extra Specificationswith two diffirent extruders heads Viscosity test machinesBrabenderPlastic machinery > Viscosity test machinesBrand > Brabender What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome ...
max. wheel diameter: 1400 mm gear width: 400 mm max. module: 25 min. module: 1 total power requirement: - kW weight of the machine ca.: 7,0 t dimensions of the machine ca.: 3,0 x 1,2 x 3,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
evopro Test Bench Printing AmbientLight P585 Manufacturer: evopro systems engineering AG Description: Test bench printing AmbientLight Project No.: P585 Serial number: 0001 Year of Make: 2017 Feed-in: 230 V / 50 Hz / 13 A (L+N+PE) Design: Closed test bench for printed AmbientLight modules Structure: Aluminum Profile Rack With Complete Test Cabin Application: Optical and functional testing of lighting or AmbientLight components
Two three phase Spitzenberger grid simulation systems for line conducted EMC tests and grid simulation are available. Output power: 30kW, voltage range: 135V-270V, max. frequency: 5kHz, power stages: PAS 4 quadrant voltage amplifier, signal source: SyCore arbitrary generator, analyzer: ARS reference analyzer, network impedance: AIP. Documentation available. An on site inspection is possible.
Alpha Alpha RPPA Production Rubber Process Analyzer Model 86042 Serial number V62AAA0095 With a production outer shell which protects operators With 5 sample auto loader with the option of using 4 rolls of film or 2 interchangeably 230 VAC 7.5 AMPS 50/60 HZ 1725 VA Max 120, Min 80 CE marked Year 2011
Prescott Rheo-Line Moving Die Rheometer (MDR) With Cutter
Key data: 450
The Klingelnberg PEK 300 H bevel gear testing machine is designed for universal single-flank rolling testing of bevel gears and crown gears. Here, gears can be measured and graphically evaluated by means of single-flank rolling testing. These test methods are particularly suitable for determining defects in the gear geometry such as concentricity and axial running properties, rolling deviations or pitch errors. Here, a practical installation situation of a gear outside the gearbox is simulated under real load conditions and then evaluated. Deviations in the gear geometry, machining errors due to defective tools and damage to the gears can thus be detected and eliminated even before assembly. The following parameters can be measured here: » Single-flank deviations Fi', fi', fl', fk' » Crossing, Runout Roundness (Option) » Carrying diagram with digital camera » Pit ...
Key data: 540
The Klingelnberg GKP 90 bevel gear testing machine was designed as a universal machine and is used by manufacturers of gears and transmission technologies, for the process of noise and contact pattern tests on bevel gears and hypoid gears. Technical data Diameter: 540 (400) mm Hypoid: ±50 mm mm Pinion spindle Dm: 90 mm mm Dimensions: 1,800 x 1,800 x 1,600 m Machine weight: approx. 2,800 kg Information and data are non-binding, subject to prior sale Special features: The machine is intended for noise and contact pattern tests on bevel and hypoid gears of all gears. By simulating operating conditions, applying different speeds and changing the load states for drive and outlet, the optimal installation distance for standstill can be determined. Digital actual value display for 2 axes Stepless speed adjustment via frequency converter Electrically fused and acceptable ...
Lens magnification: 20x, aperture: 0.35, total magnification: 200x, measuring accuracy: +/-4kp/mm², average hardness value D: 144kp/mm², average thickness of reference plate: 5.9mm, max. test height: 300mm, throat depth: 135mm, machine dimensions X/Y/Z: approx. 450mm/450mm/600mm, weight: approx. 60kg. Including various lenses, clamping device for round specimens, hardness comparison plates and more. Documentation available. On-site inspection is possible.
The Oxipack SLT is a state-of-the-art, non-destructive leak tester specifically designed for packaging inspection. It enables precise and fast leak detection without damaging the object being tested. This device is ideal for use in quality control and helps to ensure the integrity of packaging. With its user-friendly interface, the SLT offers straightforward handling and reliable results. The modern technology ensures high sensitivity and repeatability in leak testing, allowing even the smallest leaks to be effectively detected., This used unit, serviced by Oxipack as recently as November 2025, meets all required standards and is both durable and low-maintenance, making it a cost-effective solution for companies that need to conduct regular testing. The SLT is an excellent choice for any industry where tightness is critical, including the food, pharmaceutical, and packaging sectors., pow ...
Alpha PRPA Production Rubber Process Analyzer Model 86042 Serial number V62AAA0095 With a production outer shell which protects operators With 5 sample auto loader with the option of using 4 rolls of film or 2 interchangeably 230 VAC 7.5 AMPS 50/60 HZ 1725 VA Max 120, Min 80 CE marked Year 2011
A test station for steering wheel testing is available. Workpiece: steering wheels, operating pressure: 6bar, test processes: ALDW/heating mat resistance/horn contact force measurement/horn contact travel measurement. Machine dimensions X/Y/Z: approx. 1600mm/1800mm/2200mm, weight: approx. 600kg. Documentation available. An on-site inspection is possible.
Contour measuring device, contour measuring device, contourograph, contourograph, roughness measuring device, roughness measurement, roundness measurement, roughness probe -Manufacturer: Hommel, probe holder for roughness measuring device -Type: KVA type P2/115 -Tactile path: s= 12 mm -Dimensions box: 345/130/H85 mm -Weight: 1.7 kg
hardness tester, hardness measuring machine, hardness tester, hardness tester, universal hardness testing machine -Manufacturer: Reicherter, hardness tester according to Brinell/Vickers and Rockwell on solid base -Type: Briviskop BVR 187.5 H -Projection: 250 mm -Test height: 280 mm -Accessories: see photos -Total dimensions: 1200/700/H1730 mm -Weight: 256 kg
Capacity for the LTM120 is 4600 to 4800 pieces / hour. PIC: SABRINA (0177418071) F30
LEAK TEST MACHINE LTM72 FACTORY: M2 & M9 QUANTITY: 2 UNIT CONDITION: LEAKING & NOT FUNCTIONING, CAN TAKE THE PART AS SPARE PART CONTACT NUMBER: ZULAIKA 0129037331
1.Model : GTM-29 2.Maximum Capacity : Approx. 4600pcs/Hour 3.Dimensions Approx. 2.0m O/D x 1.5m O/H 4. Designed for operate 24 hours 5. c/w UPS for Computer TG Medical Sdn Bhd, F3 If interested, kindly contact : DAMIA, n.damia@topglove.com.my ARINA arina@topglove.com.my
1.Model : GTM-29 2.Maximum Capacity : Approx. 4600pcs/Hour 3.Dimensions Approx. 2.0m O/D x 1.5m O/H 4. Designed for operate 24 hours 5. c/w UPS for Computer TG MEDICAL SDN BHD, F3 If interested, kindly contact : DAMIA, n.damia@topglove.com.my ARINA arina@topglove.com.my
Optima/alpha pack complete production and packaging line for ELISA test kits, comprising Optima ImmuCoat coating system for the manufacture of 96-well microtitre plates for ELISA tests, B&R machine control with touchscreen control panel. Operation and process steps: 1. Feeding and preparation: Microtiter plates are automatically removed from destackers and transferred to the transport system. 2. Deionisation: To eliminate static charges, the plates are deionised, which is crucial for uniform coating. 3. Coding: Each plate is assigned a unique serial number, which is recorded in the system control for quality control purposes. Keyence printer. 4. Coating: The system precisely dispenses the biological components (such as antibodies or proteins) into the wells of the 96-well plate. The system can coat up to 1.200 plates per hour. 5. Product selection: The system allows the use of up to 12 b ...
A Frenco workshop gear testing device is available. Bed length: 590mm, min. center distance: 45mm, max. center distance with fine adjustment/without fine adjustment/without intermediate plate: 105mm/155mm/320mm, repeatability: 1.5µm, intermediate plate length: 210mm, max. worm diameter: 78mm, center distance (worm lengths): 0mm-220mm, measuring table dimensions X/Y/Z: 800mm/700mm/940mm. Machine dimensions X/Y/Z: approx. 1200mm/800mm/1750mm, weight: approx. 330kg. Documentation available. An on-site inspection is possible.
The testing device can measure even the smallest leaks in packaging (helium detection)., The device is little used and in good condition., Information from the manufacturer’s brochure:, The detection limit of < 10-8 mbar l/s of the CONTURA Z can only be determined by mass spectrometric, Analysis can be achieved with a test gas., However, when sensitive flexible packaging is exposed to such a pressure difference,, the sealing seams could be subjected to such severe stress that the package could even burst., Such stress is eliminated by the patented membrane chamber principle of the CONTURA Z²., Function:, The product to be tested is placed manually or automatically on the bottom membrane. When the lid, is closed, the test procedure is initiated automatically., During the evacuation, the pressure of the atmosphere pushes the highly elastic membranes against the, packaging, and the conto ...
maximum number of results exceeded
please refine your search
50 € 
