test used for sale

Stirrer/pressure boiler with agitator GOAVEC 77BX02 in good used condition, as returned by the customer. Completely made of stainless steel, double-walled, heatable (steam), 6000 litres capacity, working pressure up to 3.5 bar, test pressure 2.5 bar, pneumatically operated filling lid. Dimensions W/D/H 250/320/325 cm. Operating voltage 380 volts. More on request.

Kaeser pressure tank 1000 L 16 bar Year of build 1980, accompanying Kaeser rotary compressor 1050-2 - G see my other ads Fully functional, with pressure switch. Including valid test book â?¬590 Site 76829 Landau Shipping via forwarding only possible and pick-up preferred, forklifts to load up there.

Many thanks for your interest in our machinery, please find below our offer: Combined heat and power plant (CHPU)with up to 500KW A total of 3 independent cogenerators with combined heat and power; Electricity & hot water With only max 13280 operation hours! Operation is done with heating oil ! Permission available Total power approx. 500kw, cascade connection, in depending on power requirements, the various energy producers gradually switch on and regulate themselves on the performance. At peak load, all 3 systems work in parallel with full output Ideal for power supply in remote areas without public supply or as emergency power supply with simultaneous heat recovery if desired. Each engine has a heat exchanger. If heat is not needed, it can also be removed. The plant is constructed and ready, accordingly control etc. Top maintained. Spare parts for maintenance etc. av ...

Used rolls plant KEMPER, type: Quadro - In the bakery State - head machine with 5 series - SIEMENS Simatic OP7 control - number series: 5 units -Weight range: approx. 40-150 g -Capacity: approx. 2,000 11,000 / h -Working width: 600 mm Inspection and test run are possible by arrangement like.

Eurolux Beer Tanks / Fermentation Tanks in AISI 304 test pressure: 1,5 bar, operating pressure: 0,99 bar with Cooling Jacket with Isolation - Capacity: 1000 Litres NEW Material: V2A (AISI 304) 1.4301 Upper bottom: with Manhole with 6 Screws incl. thread connection DN 50 according to DIN 11851 with over- and underpressure valve Tank Body: with Cooling Jacket 600 mm wide with inlet 1” external thread with Isolation Lower bottom: With Conical Bottom and rest outlet underneath with a forklift and pallet truck Measurements and weight: WxH: 1150 x 1950 mm Zyl. height: 850 mm weight: 170 kg Surcharges/unit (price upon request): Fermentation Connector DN 50 Fermentation Lock Butterfly valve DN 40, DN 50 Sample Valve CIP Cleaning System Blind Cap DN 50 Immersion socket for temperature control Temperatur ...

Used Spiralkneter PIETRO BERTO, type: easy120 - for 120kg of dough - 2 speeds - 1 boiler speed -Schüsselvolumen-203 litres -Bowl diameter: 800 mm -Course mixing arm: 101 / 202 RPM. -Boiler speed: 11 RPM. -El. Connection: 3 x 400 V, 50 Hz, 6.8 kW, 16A -Weight: 568 kg The dough tool is located in a very good condition of the bakery. Inspection and test run are possible by arrangement like. Last machine in stock!

New lift elevator motor because a insolvency to a special price - Manufacturer: LOGOS Innovationen GmbH - Type LDS-320 - Asynchronous motor 15KW Manufacturer EMOD - Belt drive 4 belts - Speed 1m / s - Suspension 2: 1 - Payload 1250 Kg - 2 magnetic brakes from Mayr 2x550Nm braking force - including test protocol

Storage Tank / Beer Tank/ Pressure Tank in AISI 304 Operating pressure: 0,99 bar , Test pressure: 1,7 bar Material: V2A - AISI 304, 1.4301 Surface: inside and outside 2B=IIIC Top Bottom: with pressure lid 390 mm with 1 x thread connection DN 50 with 1 x overpressure valve with 1 x CO² connection with 6 x screws with 10 x reinforcing rings for better pressure resistance Lower Bottom: with outlet DN 50 with butterfly valve on 4 stable feets can be moved from all sides with a forklift / truck pallet Diameter: 1000 Total height: 1740 Zyl. Height: 900 Weight: 135

MAZAK laser cutting system STX510 MKII 2, 5kW very well preserved, fully reconditioned MAZAK laser machines with 2500W Panel sizes: 3000 mm x 1500 mm minimal footprint by 2, 9 m x 7, 3 m Small part conveyor Ball roller table completely encapsulated engine cover casting bed, no foundation necessary FE: up to 20mm VA: up to 10mm ALMG: up to 8mm Plastic can including CAD / CAM software 2018 version including warranty incl. commissioning + training To test power ready to delivery ready to use = optional with automatic loading and unloading MAZAK CELL =.

Kemper SPL75 Spiral Kneading Machine Spiral, dough crusher and stainless steel boiler incl. dust protection cover 2 clocks, 2 gears, clock for second speed runs with the first watch, so must be adjusted plus the first watch Feed and return of the boiler + pulse button for boiler rotation Machine in bakery condition, must be thoroughly cleaned before use Video about test run and other pictures available

25 x 850 ltr. VA2 transport tank, used, some standing, stackable, DOM above 400 mm, rest outlet with valve NW 50, operating pressure 1 bar, test pressure 1,5 bar, pressure relief valve in the lid, waterproof Druckbeständig for E.g. overlay with CO2 or CO2, weight/PCs.: 130 kg, inside cleaned, very stable design, diameter: 1 m, H:/1.52 m, price: â?¬850 plus VAT from stock Dolgesheim

Temperature test Chamber Manufacturer: Noske Kaeser Type: Tea 68 / 40 X Year of construction: 1997 Refrigerant: R404A Refrigerant type: HFC mixture Cooling range: - 40° to 160° C. chemical formula: R32/143a/134a(44%52%/4%) Capacity: 3 kg GWP value: 3922 CO2 equivalent 17.6 tons - co2 equivalent Mains voltage: 400 V Nominal listing of the compressor: 5 kW Outer dimensions: H = 1670 x 910 x = B T = 1535mm Weight: 430 kg All information without guarantee

Double door autoclave De Lama model DLOV year of manufacturing 1998. Useful capacity 4990 liters. Supply voltage 380 V - 50 Hz Tri - phase. Installed power 6 kW. Maximum working pressure 2.5 bar. Maximum working temperature 138.2 C °. Installed cycles: A sterilization + drying B for vials C For closed containers I test cold vacuum machine J sterilization air filter in situ

Cable Extension Sensors, WDS-40000-P200-M-S0, Miro Epsilon, new, Manufacturer: Micro Epsilon Type: WDS-40000-P200-M-S0 Measure length: 40000mm including test report Attention! We have set the lowest price for the new part on the market. We have other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Function guarantee! For second hand parts, we can not accept any conventional guarantee and warranty. Since we know that the device works, we give you a functional guarantee when you buy it. If the device does not work within 6 months after purchase you can return the goods and we will refund the purchase price.

UVV maintenance according to BG guideline BGR 500 Pradler Maschinen Service & Electrical Engineering Recognised maintenance technician On-site inspection , Test report Creation , Sealing Occupational safety (trailing measurement safety distance ) Operational safety according to DGUV regulation 3

V10 - used approx. 32 m³ / 32,000 litres stainless V4A steel tank, transportation tank, insulated, with 3 internal walls, on a steel frame. technical details: capacity: approx. 32 m³ / 32,000 litres material: stainless V4A steel tank, Inox, AISI 316L: WNr. 1.4404 (X2CrNiMo17-12-2), (V4A, A4L) Austenitic, stainless steel, L stands for low carbon content. use: for mechanical components with increased corrosion resistance requirements, especially in chloride-containing media and for hydrogen. AISI 316L is used in a wide range of fields, in the pharmaceutical industry (manufacture of cleaning, disinfection and drying machines), in medical and dental technology, as well as in swimming pool construction. weight: approx. 4 t without frame test pressure: 4 bar dimensions: approx. 2.00 m x 9.00 m; total height incl. frame approx. 2.70 m Other: Used tank in good condition,  ...

DOMA-T Cheese Divider KT 2 BOX Knife for 20 parts Machine for loaves with a diameter of up to 40cm Loaves are pushed upwards through the knife and pieces can then be easily taken away from the machine surface Two-hand operation, change direction by letting go and pressing both buttons again Machine must be thoroughly cleaned before use Table-table with approx. 60x70x45H Messer has been reworked before, but does not affect the function. Video about test run and other pictures available

Used spiral mixer / kneader KEMPER, type: SP 50 L -fully refurbished- - for 50 kg flour or approx. 80 kg of dough - Technical condition: Very good - External condition: Good - Refurbished - incl. 6 months warranty The kneader is in very good condition and ready for immediate use. Inspection and test run are possible on request.

Used rotary ovens W&P, Type: Rototherm REC 1280 -In bakery condition- Built in 1997 or 1994 - for trolleys 80 x 100 cm - Petrolium heater - incl. 1 pcs. trolley per oven - used in the bakery until the end - Condition: Good, well maintained El. Connection: 380 / 220 V, 50 Hz, 104 kW Baking space: 12.6 m2 Petrolium throughput: 9.0 kg/h There are 2 pieces available. Delivery costs on request. Inspection and test run are possible on request.

Separator WESTFALIA Type SB60-06-076 for beer, fruit juices, wine, vegetable juices, tea, coffee, citrus and tropical fruits for Pectin Capacity: 300-13.000l per hour with 4.800 rotations/min Measurements and Weight: Height: 2500 mm Length: 2000 mm Width: 1800 mm Weight: 2350 kg Technical specifications: Manufacturer: Westfalia Type: SB60-06-076 Year of construction: 1973 Serial number: 1668 021 Ø dl. 568 mm Drum speed: 4800 rpm Permissible density of the material to be centrifuged: Heavy liquid: 1.0 kg / dm3 Solid: 1.45 kg / dm Test books, tools, drawings available!

Floor oven W&P, type: Matador MD 125 -In bakery condition- - 5 floors - Baking area: 12m2 - Stove size: 1.2 x 2.0m - Analog control - new gas burner from ELCO - in bakery condition Sightseeing and test run are possible on request.

Ziehm Exposcop 7000 Compact Specifications: 23 cm BV, digital CCD memory LIH, video printer , with single monitor, resolution 1.2 lpmm. Sending images via the BNC video output. 6 months warranty. Monitor test according to DIN 6868 Part 57 until 2025. Very space-saving only 1.48 m2! With integrated second monitor. KV / mA range: 0.1 mA / 40 kV to 5 mA / 120 kV, Dimensions L: 180cm, H: 180cm, W: 100cm.

Used oven MIWE, type: Electric 5.1820 DS -In bakery condition- - DS control - Haze hood with fan - Condition: Good, ready to use - Delivery costs: on request - Number of flocks: 5 pieces Baking area per stove: 1.80 x 2.00 m Total baking area: 18m2 Electrical power: 112 kW The oven is in good condition and ready to use. Visit and test run on request. A dismantling is necessary and can be taken over by us.

Used cake cutting machine KRUMBEIN, type: KSSM V0,1-D -In bakery condition- - incl. 3 knife holders - Knife can be easily adjusted to cutting width - Quick removal of the individual knives - For sheets 60 x 40 cm - 8 knives should be exchanged to achieve a perfect cut - El. Connection: 400 V, 3 N+Pe, 50 Hz, 1.8 A Sightseeing and test run are possible at any time.

Machining center vertical S - plus 10 Manufacturer: Hartford BJ: 2016 Control Heidenhain ... TNC 640 Clamping table area ... 1150x520mm Axis X ... 1020mm Axis Y ... 520mm Axis Z ... 550mm Spindle speed ... 12000-_/min. controlled axes... 3 cooling ... 20bar ISO 40 Magazine places... 24 chip Conveyor Workpiece probe The machine is in good condition, possible to test under power.

Machining center vertical Speed 1110 Manufacturer: TRIMILL BJ: 2010 Control Heidenhain ... TNC 530 Clamping table area... 1300x1200mm Axis X ... 1100mm Axis Y ... 1000mm Axis Z ... 700mm Spindle speed ... 30-14000 rpm. controlled axes... 3 HSK A80 Total power demand ... 56kVA Machine Weight... 14500kg Rush.. 20m/min L x W x H ... 4400x5500x3810mm Workpiece probe Heidenhain TS740 Magazine places 10 Spindle cooling only with air new spindle 2017 The machine is in good condition, possible to test under power.

Table drilling unit W 100 A Manufacturer: TOS Varnsdorf overhauled: 2019 Spindle diameter ... 100mm Axis X ... 1600mm Axis Y ... 1120mm Spindle speed ... 7-1120 rpm. Axis W ... 900mm Axis Z ... 1250mm ISO 50 Max table load ... 3000kg L x W x H ... 6710 x 3450 x 3000mm Machine weight ... 14000kg Main Engine Power... 11kW Total power demand ... 17kVA Clamping table area ... 1250 x 1250mm Flat disc diameter... 600mm Max circulation diameter ... 900mm The machine is possible to test under electricity, with one-year warranty.

Electric motor Kuenle KAMHE 250 55 kw at 2955 rpm NV IE 2 400/690 V 50 Hz Iso F IP 55 Thermistor Very good condition Test run done successfully.

GEA Plate heat exchanger NT50T CDS-10 with 10 plates in very good condition Material: 1.4405 Min./Max. permissible pressure: 0 bar / 6 bar (both sides) Min./Max. permissible temperature: 0.0 °C / 100 °C Test pressure: 7.8 bar Volume: 0.82 / 1.03 L Kerb weight: 83 kg Width: 320 mm Height: 670 mm Depth: 600 mm Connections: 2x Flange DN50 2x Flange DIN 11851 (milk pipe thread) Number of plates: 10 Last refrigeration/heat medium: water-glycol mixture Seals: EPDM

GEA Plate heat exchanger NT50T CDS-10 with 10 plates in very good condition Material: 1.4405 Built: 2007 Min./Max. permissible pressure: 0 bar / 6 bar (both sides) Min./Max. permissible temperature: 0.0 °C / 150 °C Test pressure: 7.8 bar Volume: 0.82 / 1.03 L Kerb weight: 88 kg Width: 320 mm Height: 670 mm Depth: 600 mm Connections: 2x Flange DN50 2x DIN 11851 (milk pipe thread) Last heat medium: steam Seals: EPDM

GEA plate heat exchanger VT10 CDS-16 with 10 plates in very good condition Built: 03/2006 Min/Max permissible pressure: 0 bar / 10 bar (both sides) Min./Max. permissible temperature: -10 °C / 100 °C Test pressure: 13 bar Volume: 3.0 / 3.3 L Kerb weight: 133 kg Width: 290 mm Height: 920 mm Depth: 570 mm Refrigeration/heat medium: propylene glycol Connections: 4x Pipe nipple DN 50 Device can be inspected at any time in 76694 Forest upon request.

Lister generator set 15 kVA with starter unit - - - - - Engine: - Lister (English manufacturer of industrial engines) - 4 cylinders -Diesel -Water-cooled - 1500 rpm - - - - - Generator: - Manufacturer: Stamford (England) - 15 kVA - 230 / 400 volts - 50 Hertz - AVR - - - - - Control box / starter unit: - Ignition lock for starting - Volt display - Hertz display - Ampere display - Battery voltage indicator - Operating hours counter: 5600 hours - - - - - Condition: -Used - The device was used for emergency protection and for occasional use - A test run with load reduction was made - The engine runs well - The generator generates 400 volts and 50 hertz - - - - - Scope of delivery: - Lister generator set 15 kVA - with starter unit - - - - - Transport: - A Germany-wide transport incl. unloading is possible for an extra charge - To ...

Used fluid bed dryer made by Glatt, model WSG-60 - New: 1978. - All documents for the WSG are still available and filed in a folder. - The fluidized bed dryer works perfectly and has been upgraded with a modern frequency converter. - WSG is easy to regulate, which allows processing/drying of different products. - There are two boilers, each 240 liters. This allows one batch to be processed while preparing the next batch. - Nine filter bags, so it can be used for different products or when some filters need to be cleaned. - The machine is currently still connected. - Test of new user product possible. - The machine is being sold due to a company liquidation.

Capacity: 8.4 m3/h Operating pressure test 13 bar Engine: 3.5 kW - With connectors: DN 65, DN 50, DN 65 - With chassis mobile 2 steering and 2 buck wheels - With cable and CE plug 16A Dimensions and weight: Length: 2200 mm Width: 500 mm Height: 1080 mm Note: Pump 100% tested, with functional guarantee On request, it can be infinitely adjusted with frequency inverter for additional costs. Connections can be changed at an additional cost.

GeneralHorizontal universal machining center; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal650 mmCross700 mmVertical950 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minCabineFull protection cabinMotor spindle 20,000 rpmMotor spindle speedMASTER® HSK-A 63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)Taper cleaning brushesTaper cleaning unit with rotating brushes for spindle taper HSKNC swivel rotary table DirectDriveNC swivel rotary table direct drive Table plate: d 650 mm / 25.6 in 1 x T-slot 14 H7 / 0.55 H7 (alignment groove, table centre) 8 x T-slot 14 H12 / 0.55 H7 (clamping grooves) Permissible load: 600 kg / 1,323 lbs Rotary-axis: 80 min-1 direct drive Swivel-aKinematics a ...

Type: FPE 3522 Capacity: 200 l/min Operating pressure test 4.5 bar Engine: 4 kW - With connectors: suction side DN 50 and print side: DN 65 - With chassis mobile 2 steering and 2 buck wheels - With cable and CE plug 16A Dimensions and weight: Length: 500 mm Width: 480 mm Height: 1000 mm Note: Pump 100% tested, with functional guarantee On request, it can be infinitely adjusted with frequency inverter for additional costs. Connections can be changed at an additional cost.

Single column - hydraulic press MAE type S63SZ SO Masch.Nr. 551277 Year of construction approx. 1977 Compressive force 63 ton. Projection 320 mm Table surface 850 x 630 mm Ram surface 1050 x 500 mm Ram stroke 500 mm Installation height max. approx. 730 mm Table height above corridor 970 mm Tank capacity Hydraulic 600 litres Drive power 15 kW Mains connection 380 Volt, 50 Hz - Hydraulic die cushion under the table with holes through the table top - 2-hand operation - Electric control cabinet damaged Space requirement L x W x H 2000 x 1200 x 3420 mm Weight approx. 5 ton. The machine is working, the control cabinet is mechanically damaged. During the test run, the machine reaches a pressing force of 50 tons, presumably a pressure relief valve flows off.; used

Recon - Part number 0405 2465 - Completely polished - Standard size 119/98 - Flange diameter 160mm - Incl. counterweights & gears - With old GL-test stamping ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

We sell a large batch of used Konica Minolta and OKI copiers and printers. All equipment comes from lease return or insolvency. The equipment was included in the maintenance contract during the lease. The devices are functional and on all devices there is a test printout with all meter information. Mixed lot: 3x Konica Minolta Bizhub C3100p, 12x Oki ES 4132, 3x Oki ES 5112, 2x Oki ES 7131, 3x Oki ES 4192MFP, 6x Oki ES 5462MFP, 4x Oki ES 5431, 7x Oki ES 8473MFP. We are happy to send meter readings and photos. The sale takes place from our warehouse in Dachau near Munich. Prices are EXW. Please understand that we only sell the entire lot or mixed packages of at least 10x pieces. Invoicing with VAT statement.

Hach DR 3800 VIS Spectrophotometer The DR 3800 is a VIS spectrophotometer with a wavelength range of 320 to 1100 nm. The device comes with a complete set of application programs and supports multiple languages. The DR 3800 spectrophotometer contains the following Programs and operating modes: Saved programs (pre-installed tests), barcode programs, user programs, favorites, single wavelength, multi-wavelength, wavelength scan and time scan. The DR 3800 spectrophotometer performs digital measurements in concentration, absorbance or % transmission. When selecting a user-generated or programmed method, a structured menu control and prompts guide the user through the test. This menu system can also generate reports, statistical evaluations of generated calibration curves and reports on instrument diagnostic checks Display mode: transmission (%), absorbance, and concentration Light ...

DIASORIN Liaison Type 2229 Immunodiagnostic Analyzer The LIAISON analyzer combines a flexible operating module with a wide assay menu and results in high efficiency due to its long walk-away time. The ability to perform up to 15 different assays simultaneously ensures a streamlined testing routine even with a small number of samples. The LIAISON analyzer is designed for immunoassay testing and uses "flash" chemiluminescence technology (CLIA) with a paramagnetic microparticle solid phase (MP). The LIAISON analyzer is efficient from the start, allowing continuous loading of samples, reagents and the workload can be processed in direct access or batch mode. All test methods are based on an internal master curve with 2-point calibration. Autodilution, repeat and reflex tests are performed at the operator's request and performed automatically by the system. The LIAISON system also ha ...

Servo controlled horizontal flowrap machine with bottom reel that produces pillow packs with three air tight seals, from a reel of heat sealable wrapping material. The machine is designed to pack products of variable size and shape. The machine is designed for M.A.P. (Modified Atmosphere Packaging). This version of Shamal machine is left-handed (flow of wrapped products right-to-left). Main Features: Flexibility: the format can be changed in just a few minutes. The Shamal includes the LVA function which is the automatic adjustment of bag length according to the length of the product, as well as a print registration facility. The ERS (Extended Rotary Sealing) concept allows the products to be wrapped with a max. height of 120 mm. Ergonomics: The new design of the main guard, shuttle conveyors, crimper assembly and crimper height adjustment have improved the user friendliness of th ...

Deutz emergency generator set 300 kVA Emergency system - - - - - Engine - Deutz (Germany) - 12 cylinder V12 -Diesel -Water-cooled - 1500 rpm - - - - - Generator - Manufacturer: AvK A. van Kaick (Germany) - 300 / 330 KVA - 230 / 400 volts - 50 Hertz - - - - - Condition: - The generator set is purely an emergency system - The device was used for emergency power protection in a hospital - Regular maintenance and test runs were made - The motor runs well and the generator generates 400 volts and 50 hertz - - - - - Scope of delivery: - Deutz generator set 300 / 330 kVA - Consisting of the Deutz engine and the AvK generator - - - - - Dispatch: - A Germany-wide transport is possible for an extra charge - In order to be able to give an exact freight price please send me a request with your postal code - - - - - Price: - 12.750,- € + 19 ...

Ford generator set 35 kVA only 20 operating hours - - - - - Engine: -Ford - 3 cylinders -Diesel -Water-cooled - 1500 rpm - - - - - Generator: - 35 kVA - 230 / 400 volts - 50 Hertz - AVR ESC - - - - - Starter Unit: - Ignition lock for starting - Engine temperature display - Oil pressure indicator - Generator monitoring: volts, amps, hertz - Operating hours counter: 19 operating hours - - - - - Condition: - The generator set is an emergency system - It has only run 20 hours of operation - A test run with load reduction was made - The engine starts and runs well - The generator generates 400 volts and 50 hertz - A new AVR controller has been installed - - - - - Scope of delivery: - Ford generator set 35 kVA - with starter unit -Tank -Exhaust - - - - - Transport: - A Germany-wide transport is possible for an extra charge - In ord ...

Stephan UM25 Universal Machine three speeds 720/1430/2880 rpm Mixed insert blunt Stainless steel boiler with double jacket Machine tiltable for removing the processed medium Machine in very good condition Video about test run and other pictures available

VM generator set 80 kVA with control cabinet - - - - - Engine: - VM (Italian manufacturer of industrial diesel engines) - 8 cylinders -Diesel -Air-cooled - 1500 rpm - - - - - Generator: - Manufacturer: Leroy & Somer (France) - 80 kVA - 230 / 400 volts - 50 Hertz - AVR ESC - - - - - Switchboard: - Digital control with display - Start button to start - Automatic start function - Motor monitoring - Generator monitoring - - - - - Condition: - The generator set is an emergency system - The device has only run for 1300 hours - Regular maintenance and test runs were made - - - - - Scope of delivery: - VM generator set 80 kVA - with control cabinet - incl. automatic start function - - - - - Transport: - A Germany-wide transport is possible for an extra charge - In order to be able to quote an exact freight price, please send us an inq ...

Grease separator sether boiler, Type: Easy Clean Standard NS 4B completely cleaned and rinsed, grease-free and odourless. leakage test. A spout pump is included in the scope of delivery. New price was 8000,00â?¬ net. Deutschaland-wide shipping in German-speaking countries possible at an additional cost. Delivery: - Boiler grease separator Easy Clean Standard NS 4B - Sampling device DN100/150 horizontal - Spühl pump for grease separators

Cummins generator set 200 kVA only 400 operating hours - - - - - Engine: -Cummins - Model: NT855-G - 6 cylinders -Turbo -Diesel -Water-cooled - 1500 rpm - - - - - Generator: - Manufacturer: Stamford (England) - 200 kVA - 230 / 400 volts - 50 Hertz - AVR ESC - - - - - Condition: - The generator set is an emergency system - It has only run 400 operating hours - Regular maintenance and test runs were made - - - - - Scope of delivery: - Cummins generator set 200 KVA - incl. large silencer - - - - - Transport: - A Germany-wide transport is possible for an extra charge - In order to be able to quote an exact freight price, please send us an inquiry with your postal code - - - - - Price and payment: - Price: 8000,- € + 19 % VAT = 9520,- € - Payment: Prepayment - An invoice with VAT is issued - - - - - Other: - Sale of used  ...

20x 800 ltr. VA2 transport tank, used, round standing, stackable, dome top 400 mm, residual outlet with disc valve NW 80, operating pressure 2 bar, test overpressure 3.4 bar, overpressure valve in the lid, pressure resistant for e.g. overlay with CO2 or CO2 impregnation, weight/h: 130 kg, cleaned inside, pressure-tested, very stable design, diameter: 1 m, H: 1.60 m, Price/pc: 940,- â?¬ plus VAT from dolgesheim warehouse

Note - please read ! --> The motor runs well, the generator does not generate voltage --> A used replacement generator can be purchased for an extra charge (see picture 5) - - - - - Lister generator set 20 kVA - - - - - Engine: - Lister (English manufacturer of industrial diesel engines) - 3 cylinders -Diesel -Air-cooled - 1500 rpm - - - - - Generator: - 20 kVA - 230 / 400 volts - 50 Hertz - - - - - Condition: -Used - A test run was made - The engine starts and runs well - The generator does not generate voltage - - - - - Scope of delivery: - Lister generator set 20 kVA - consisting of motor and generator - installed on a metal base frame - For an extra charge a used 20 kVA generator can be purchased (see picture 5) - - - - - Transport: - A Germany-wide transport is possible for an extra charge - In order to be able to quote an exac ...