test used for sale

Machine Type Electrode Inverter Welding Rectifier Ep Systems brand Plant No.: 99J33202 Type W 150 E Connection voltage 1 x 230 Volt Setting range 5 – 150 amps Duty cycle 35 % ED at 150 Ampere 60% ED at 120 amps 100% ED at 100 amps Current adjustment infinitely variable weldable electrode 4 mm Cooling inverter by built-in fan Version portable mounting system Fuse 16 amps Dimensions L x W x H 120 x 300 x 270 mm Weight 4 kg Age approx. 10 years Condition workshop tested good incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece electrode cable 16 qmm, 4 mtr. long 1 piece ground cable 16 qmm, 4 mtr. long 1 piece hand shield 1 piece attachment glass 90 x 110 mm white 1 piece of protective glass 90 x 110 mm 10 DIN 25 pieces rod electrodes Böhler 2.5 x 350 mm 25 pieces rod electrode ...

Machine Type Electrode Inverter Welding Rectifier with PFC control STEL brand Type MAX 191 PFC Connection voltage 1 x 230 Volt Setting range 5 – 160 amps Duty cycle 30 % ED at 160 Ampere 60% ED at 115 amps 100% ED at 100 amps Current adjustment infinitely variable weldable electrode 4 mm Cooling inverter by built-in fan Version portable mounting system Fuse 16 amps Dimensions L x W x H 420 x 160 x 280 mm Weight 9 kg Age 6 months Special accessories PFC control Condition workshop tested, new incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece electrode cable 16 qmm, 4 mtr. long 1 piece ground cable 16 qmm, 4 mtr. long 1 pair of welder gloves with cuff 1 piece slag hammer, heavy version 1 piece steel wire brush 2-row 20 pieces rod electrodes Böhler 2.5 x 350 mm 20 pieces rod ...

Machine type MIG/MAG welding system Brand Rehm Type Magnum 182 Supply voltage 230/400 volts Setting range 30 – 180 amperes Duty cycle 25 % ED at 180 amps 60% ED at 140 amps 100% ED at 100 amps Current setting 6 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 2-roller drive Fuse 16 Ampere Special device 2-stroke/4-stroke Points/Interval Dimensions L x W x H 760 x 320 x 580 mm Weight 53 kg Age approx. 20 years Condition workshop tested, very good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll of welding wire D-300 coil, 5 kg, 8.0 mm Ø 1 can non-stick spray 1 piece hand shield 1 piece protect ...

Machine type electrode inverter welding rectifier Brand Böhler Type Terra 220 RC Supply voltage 3 x 400 volts, ± 15 % Setting range 3 – 220 amperes Duty cycle 30 % ED at 220 amps 60% ED at 170 amps 100% ED at 150 amps Current adjustment infinitely variable weldable material thickness 6 mm Cooling inverter by built-in fan Portable assembly system version Fuse 16 Ampere Dimensions L x W x H 410 x 150 x 330 mm Weight 11 kg Age 6 months Condition workshop tested, as new incl. UVV test protocol Scope of delivery welding system with the following accessories 1 piece ground cable 1 piece electrode cable 1 piece hand shield 1 piece of glass 90 x 110 mm, white 1 piece protective glass 90 x 110 mm, 10 DIN 20 rod electrodes in 2.0 x 250 mm 20 rod electrodes in 2.5 x 350 mm 1 piece instruction manual Warranty 24 months fro ...

Machine type plasma inverter cutting machine Make Jess Type JETARC Plasma 30 i Supply voltage 1 x 230 volts Setting range 10 – 30 amps Duty cycle 35 % ED at 30 amps 60% ED at 25 amps 100% ED at 21 amps Current adjustment infinitely variable separation cut 10 mm quality cut 8 mm Cooling inverter by built-in fan Cooling burner compressed air-cooled, 50 ltr/min at 4.5 bar Portable assembly system version Fuse 16 Ampere Dimensions L x W x H 480 x 165 x 290 mm Weight with burner 11 kg Age 6 months Condition workshop tested, as new incl. UVV test protocol Scope of delivery plasma cutting system with the following accessories: 1 hand cutting torch FHT-EX 30 H, 4 mtr. long 1 piece ground cable, 6 mtr. long 1 piece carrying case impact-resistant, waterproof 1 piece instruction manual Warranty 24 months from date of delivery List ...

Machine type plasma inverter cutting machine Make Jess Type JETARC Plasma 45 i Supply voltage 3 x 400 volts Adjustment range 10 – 45 amperes Duty cycle 80 % ED at 45 amps 100% ED at 40 amps Current adjustment infinitely variable separation cut 25 mm quality cut 12 mm Cooling inverter by built-in fan Cooling burner compressed air cooled at 90 ltr/min at 4.5 bar Portable assembly system version Fuse 16 Ampere Dimensions L x W x H 470 x 180 x 230 mm Weight with burner 13 kg Age 6 months Condition workshop tested, as new incl. UVV test protocol Scope of delivery plasma cutting system with the following accessories: 1 hand cutting torch FHT-EX 45 TT, 4 mtr. long 1 piece ground cable, 6 mtr. long 1 piece carrying case impact-resistant, waterproof 1 piece instruction manual Warranty 24 months from date of delivery List price dire ...

Machine type plasma inverter cutting machine Make Jess Type JETARC Plasma 100 i Supply voltage 3 x 400 volts Adjustment range 30 – 100 amperes Duty cycle 50 % ED at 100 amps 100% ED at 80 amps Current adjustment infinitely variable separation cut 50 mm quality cut 35 mm Cooling inverter by built-in fan Cooling burner compressed air cooled Portable assembly system version Fuse 32 Ampere Dimensions L x W x H 560 x 265 x 400 mm Weight with burner 24 kg Age 6 months Condition workshop tested, as new incl. UVV test protocol Scope of delivery plasma cutting system with the following accessories: 1 hand cutting torch FHT-EX 105 RTX, 4 mtr. long 1 piece ground cable, 6 mtr. long 1 piece instruction manual Warranty 24 months from date of delivery List price directly ex works 3.020,00 € + VAT Price kpl. with above accessories 2.5 ...

Machine type plasma inverter cutting machine Make Hypertherm Type Powermax 105 SYNC Serial No. 059.650 Supply voltage 3 x 400 volts Setting range 30 – 105 amps Duty cycle 80 % ED at 105 amps 100% ED at 94 amps Current adjustment infinitely variable separation cut 50 mm at 125 mm/min quality cut 32 mm at 500 mm/min Cooling inverter by built-in fan Cooling burner compressed air cooled Portable compact system version Fuse 32 Ampere Dimensions L x W x H 590 x 275 x 510 mm Weight with burner 45 kg Age 6 months Condition workshop tested, as new incl. UVV test protocol Scope of delivery plasma cutting system with the following accessories: 1 piece plasma hand cutting torch 75°, 7.6 mtr. long 1 piece ground cable 1 piece instruction manual Warranty 24 months from date of delivery List price directly ex works 8.600,00 € + VAT  ...

Machine type MIG/MAG inverter welding system Brand Mahe Type Eco MIG 300 Digital Supply voltage 3 x 400 volts Setting range 10 – 300 amperes Duty cycle 40 % ED at 300 amps 60% ED at 240 amps Current adjustment infinitely variable incl. wire automatic Cooling inverter by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feed gearbox 4-roller gearbox Fuse 16 Ampere Dimensions L x W x H 880 x 400 x 635 mm Special accessories wire switch without power for threading TIG DC, without RF Rod electrodes weldable Weight 34 kg Age as good as new Condition workshop tested, as new, incl. UVV workshop test report Scope of delivery welding system with the following accessories 1 piece welding torch 3 mtr. long 1 piece ground cable 4 mtr. long 1 piece pressure reducer argon with 2 pressure gauges 1 roll of weldin ...

Machine type MIG/MAG inverter welding system Brand Mahe Type Eco MIG 300 Analog Supply voltage 3 x 400 volts Setting range 10 – 300 amperes Duty cycle 30 % ED at 300 amps 60% ED at 240 amps Current setting 12 switching stages Cooling inverter by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 4-roller drive Fuse 16 Ampere Dimensions L x W x H 880 x 400 x 635 mm Special accessories wire switch without power for threading Rod electrodes weldable Weight 34 kg Age as good as new Condition workshop tested, like new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll welding wire D-300 coil, 5 kg 1 can non-stick spray 1 piece spare parts box, k ...

Machine type electrode inverter welding rectifier Brand Alphaweld Type Alphaforce E-160 Supply voltage 1 x 230 volts Adjustment range 5 – 160 amperes Duty cycle 25 % ED at 160 amps 60% ED at 100 amps 100% ED at 80 amps Current adjustment infinitely variable weldable material thickness 4 mm Cooling inverter by built-in fan Portable assembly system version Fuse 16 Ampere Dimensions L x W x H 320 x 130 x 200 mm Weight 6 kg Age 24 months Condition workshop tested, like new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece electrode cable 1 piece ground cable 1 piece hand shield 1 piece of glass 90 x 110 mm white 1 piece protective glass 90 x 110 mm 10 DIN 1 pair of welding gloves with cuff 1 piece slag hammer heavy version 1 piece steel wire brush 2-row 25 rod electrodes  ...

Machine type electrode inverter welding rectifier Brand Alphaweld Type Alphaforce E-200 Supply voltage 1 x 230 volts Setting range 15 – 160 amperes Duty cycle 25 % ED at 200 amps 60% ED at 110 amps 100% ED at 100 amps Current adjustment infinitely variable weldable material thickness 5 mm Cooling inverter by built-in fan Portable assembly system version Fuse 16 Ampere Dimensions L x W x H 280 x 130 x 210 mm Weight 8 kg Age 24 months Condition workshop tested, like new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece electrode cable 1 piece ground cable 1 piece hand shield 1 piece of glass 90 x 110 mm white 1 piece protective glass 90 x 110 mm 10 DIN 1 pair of welding gloves with cuff 1 piece slag hammer heavy version 1 piece steel wire brush 2-row 25 rod electrodes  ...

Machine type Pulse-Arc inverter welding system Brand EWM Type Phoenix 300 Expert Supply voltage 3 x 400 volts Adjustment range 5 – 300 amperes Duty cycle 30 % ED at 300 amps 60% ED at 220 amps 100% ED at 170 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Portable industrial plant design Wire feeder 4-roller drive Fuse 16 Ampere Dimensions L x W x H 1,000 x 480 x 1,100 mm Weight 65 kg Age approx. 10 years Condition workshop-tested very good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 pressure reducer with 2 pressure gauges 1 pair of welding gloves with cuff 1 piece spare parts box kpl. Equipped 1 can non-stick spray ME 4000 1 piece instruction manual Warranty 6 mont ...

built 2009 - last recurring examination 10/21 - complete with test book, declaration of conformity, acceptance test, etc. - Boom 6 m, up to 400 kg - Chain hoist Star Liftket BF 021/51 500/2 - 4/1 - complete with wall brackets, cable drag, etc.

Net price (excl. VAT) = 33.500,- € gross price (incl. VAT) = 39.865,- € - - - - - Perkins generator set 600 / 650 kVA kVA only 70 operating hours - with control cabinet - - - - - - Manufacturer: Heinkel, Berlin - - - - - Engine: - Perkins (England) - Model: 3012-TAG2 - 12 cylinders -Turbo -Diesel -Water-cooled - 1500 rpm - - - - - Generator: - Manufacturer: VEB Elektromotorenwerk Dessau (Germany) - Power: 600 / 650 kVA - 230 / 400 volts - 50 Hertz - - - - - Switchboard: - Start button to start - Automatic start (device starts automatically in case of power failure) - Generator monitoring: volts, amps, hertz, kW, kVA - Engine monitoring: oil pressure, engine temperature, battery voltage, lack of fuel, speed, etc. - Operating hours counter: 66 operating hours - - - - - Other data: - Length: 380 cm - Width: 135 cm - Height: 215  ...

The Cabero heat exchanger model AC/VC099EB/IN is a powerful heat exchanger designed for use in industrial applications. With a test pressure of 32 bar and an operating overpressure of 28 bar, it is able to withstand even high loads. The heat exchanger consists of a robust housing made of high-quality stainless steel to ensure high resistance to corrosion and wear. Inside, there are numerous close-fitting stainless steel tubes that ensure effective heat transfer. The AC/VC099EB/IN is a plate-shaped heat exchanger capable of achieving high heat output with low pressure drop. It can be used for a variety of applications, including air conditioning of buildings, cooling of machinery and heat recovery in industrial processes. The heat exchanger is easy to install and maintain as it has a robust and accessible frame that allows easy handling and cleaning. With its high reliability and ...

Machine type MIG/MAG welding system Brand MERKLE Type M 3000 K Appendix No. 34.663 Supply voltage 3 x 400 volts Setting range 25 – 280 amperes Duty cycle 50 % ED at 280 amps 60% ED at 250 amps 100% ED at 200 amps Current setting 14 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 2-roller drive DV 20 Fuse 16 Ampere Dimensions L x W x H 910 x 460 x 760 mm Weight 120 kg Age approx. 15 years Condition workshop-tested good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 4 mtr. long, 25 sq m 1 piece pressure reducer argon with 2 pressure gauges 1 roll welding wire D-300 coil, 5 kg 1 can non-stick spray 1 piece hand shield 1 piece protective glass 10 DIN  ...

Machine type MIG/MAG welding system Brand Merkle Type SpeedMIG touch 450 KW Appendix No. 120.420 Supply voltage 3 x 400 volts Adjustment range 20 – 450 Ampere Duty cycle 60 % ED at 450 amps 100% ED at 360 amps Current adjustment infinitely variable Cooling transformer by built-in fan Cooling burner water-cooled Design of mobile industrial plant Wire feeder 4-roller drive DV 26 Fuse 32 Ampere Special accessories touchpad DeepARC ColdMIG HighUP Dimensions L x W x H 1,050 x 450 x 890 mm Weight 180 kg Age 4 years Condition workshop tested, very good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 4 mtr. long, 70 qmm 1 piece pressure reducer argon with 2 pressure gauges 1 piece spare parts box, kpl. Equipped 1 pair of welding  ...

Machine type: MIG/MAG welding system Make MERKLE Type ME 283 LK Attachment no. 13.539 Connection voltage 3 x 400 volts Setting range 35 – 280 amps Duty cycle 20 % d.c. at 280 amps 60% d.c. at 200 amps Current adjustment 14 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Portable compact system design Wire feed gearbox 2-roller drive Fuse 16 amps Dimensions L x W x H 855 x 375 x 590 mm Weight 79 kg Optional accessories for point and interval equipment Age: approx. 25 years Condition workshop-tested, good incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll of welding wire D 300, 5 kg 1 pair of welding gloves with cuff 1 piece spare parts  ...

For sale refreshed and after oil service, proven electrics mounted new box. The generator is fully operational and ready for use. It produces up to 400V. Silent 80 kVA power generator Manufacturer: SDMO NS 60 IV M Model: 80 kVA Year: 2005 Serial number: 163257/2 Odometer reading: 35435 mt/h Weight (kg): 1000kg Power: 80kVA Dimensions: Length (m): 2.4 m Width (m): 1 m Height (m): 1.5 m Possibility of transport to the indicated address. Remark The price given is in Net value and is valid for Export and for companies. For an individual customer, a large discount is possible - Feel free to contact us directly by phone to get your best price :) — After price negotiations, we are able to record a film in detail for a determined customer or perform a computer test or a varnish meter test to calmly buy equipment at a distance. — Of course, we encourage you t ...

Key data: 300 , 49 , 28

Now fully refurbished is this four tie-bar BOY 30 tonne clamp machine with Dipronic controller . The Dipronic controller fitted to this machine and other ‘D’ series has stood the test of time and is now even demanding a premium. The controller and setup of the machine is straightforward, easy to problem solve and great for learning. Without expensive computer controlled systems, the cost of any repairs are often very low and easily carried out. The machine offers excellent platen dimensions and tie-bar clearance for the footprint, these machines are some of the most popular in the market for their niche. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machi ...

Injection pump diesel pump JCB Stanadyne A3 DB4429-6101 Condition: as good as new (test run ex works) Manafacture: Stanadyne Part Number: A3 DB4429-6101 JCB number: 320/0674 On sale are 40 injection pumps from 2012 to 2020. The pumps were subjected to a test run at the factory. When we arrived at our premises, they were staked out, dismantled and stored.

Machine type: Pulse arc inverter welding machine with touch display Make MERKLE Type HighPULSE touch 280 K Serial No. 130.233 Connection voltage 3 x 400 volts Setting range 25 – 280 amps Duty cycle 35 % d.c. at 280 amps 100% d.c. at 200 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Portable industrial plant design with a connection for water cooling Wire feeder 4-roller drive DV 26 Fuse 16 amps Dimensions L x W x H 600 x 300 x 565 mm Weight 33 kg Age: 2 years Condition workshop-tested, like new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 307, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll of welding wire 0.8 mm, D-300, 5 kg 1 pair of welding gloves wi ...

Machine type: Pulse arc inverter welding machine with touch display Make MERKLE Type HighPULSE touch 280 K Connection voltage 3 x 400 volts Setting range 25 – 280 amps Duty cycle 35 % d.c. at 280 amps 100% d.c. at 200 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Portable industrial plant design with a connection for water cooling Wire feeder 4-roller drive DV 26 Fuse 16 amps Dimensions L x W x H 600 x 300 x 565 mm Weight 33 kg Age: 6 months Condition workshop-tested, like new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 307, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll of welding wire 0.8 mm, D-300, 5 kg 1 pair of welding gloves with cuff 1 piece sp ...

Machine type: Pulse arc inverter welding machine Make: Rehm Type Megapuls 500 Attachment no. 228.434 Connection voltage 3 x 400 volts Setting range 10 – 500 amps Duty cycle 45 % d.c. at 500 amps 60% d.c. at 450 amps 100% d.c. at 350 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case and 1.6 mtr. long VB cable Wire feeder 4-roller drive Fuse 32 amps Dimensions L x W x H 1,030 x 600 x 1,300 mm Weight 175 kg Special accessories for filter attachment and wheels on the DV box Age approx. 10 years Condition: workshop-tested, good incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauge ...

Electronic module GEBRÜDER BOEHRINGER 4022 226 0790 4022 226 1836.1 4022 100 0790 with test tape ( punched tape ) DP6600/TT3, 9499 180 09299 Test tape ) DP6600/TT1, 9499 186 00199 and connection cable New dimensions ( board ): 215 x 225 x 35 mm Dimensions ( packaging ): 335 x 285 x 70 mm

Machine type: MIG/MAG welding system Make MERKLE Type M 254 K Appendix No.: 22.538 Connection voltage 3 x 400 volts Setting range 25 – 250 amps Duty cycle 60 % d.c. at 250 amps 100% d.c. at 200 amps Current adjustment infinitely variable Cooling transformer by built-in fan Cooling burner gas-cooled Portable compact system design Wire feed gearbox 4-roller drive DV 25 Fuse 16 amps Dimensions L x W x H 955 x 460 x 760 mm Weight 110 kg Age: approx. 25 years Condition workshop-tested, good incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 307 G, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll of welding wire D 300, 5 kg 1 pair of welding gloves with cuff 1 piece spare parts cheese cpl. Equipped 1 can of non-stick spray  ...

Enigines stopped end Overhauled never run after again. Rated power 1,2 MW MAX ALTITUDE OF INSTALLATION : 500 M MAXIMUM AMBIENT TEMP : 25 C RATED FREQUENCY : 50 HZ RATED VOLTAGE : 400 V RATED CURRENT : 1,732 A MASS : 12,025 KG 2. GENERATOR DETAILS: MAKE : LEROY SOMER ALTERNATORS PARTNER LSA : C 50.2VL10B C 6S/4 DATE : 2013/21 FREQUENCY : 50 HZ SPEED : 1500 RPM PROTECTION : IP23/4 POWER FACTOR : 1.0 INSULATION CLASS: H/F A.V.R : R450 EXCITATION : AREP ALTITUDE : < 1000 M MASS WEIGHT : 3300 KG HEAT EXCHANGER DETAILS: MAKE : ARRA (A.S.T.R.A. REFRIGERANTI) DATE : 07/09/2012 DESIGN PRESSURE (TUBE SIDE) : 5 BAR DESIGN PRESSURE (SHEEL SIDE) : 4.5 BAR TEST PRESSURE (TUBE SIDE) : 7.5 BAR TEST PRESSURE (SHEEL SIDE)  ...

Machine type: MIG/MAG welding system Make MERKLE Type RedMIG 2000 K Serial No. 81.838 Connection voltage 3 x 400 volts Setting range 25 – 200 amps Duty cycle 30 % d.c. at 200 amps 60% d.c. at 140 amps Current setting 7 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Portable compact system design Wire feeder 4-roller drive DV 26 Fuse 16 amps Dimensions L x W x H 800 x 460 x 655 mm Weight 70 kg Age approx. 12 years Condition workshop-tested, good, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece of pressure reducer argon with 2 pressure gauges 1 roll of welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece protective glass 10 DIN 1 piece facing glass white 1 piece  ...

Machine type: Electrode welding rectifier Make EWS Attachment no.: 290.623 Type EW 130 Connection voltage 1 x 230 volts Setting range 3 – 130 amps Duty cycle 35 % d.c. at 130 amps 60% d.c. at 100 amps 100% d.c. at 90 amps Current adjustment infinitely variable max. weldable electrode 3.2 mm Ø Cooling by built-in fan Portable assembly line design Fuse 16 amps Dimensions L x W x H 340 x 170 x 220 mm Weight 6 kg Age approx. 15 years Condition: workshop-tested, good incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece electrode cable 1 piece ground cable 1 piece hand shield 1 piece facing glass 90 x 110 mm white 1 piece protective glass 90 x 110 mm 10 DIN 25 rod electrodes Böhler 2.5 x 350 mm 25 rod electrodes Böhler 3.2 x 350 mm Warranty 6 months from the date of delivery  ...

Machine Type: Electrode Inverter Welding Rectifier Make EP-Systems Type genera 200 Connection voltage 1 x 230 volts Setting range 8 – 200 amps Duty cycle 40 % d.c. at 180 amps 60% d.c. at 150 amps 100% d.c. at 120 amps Current adjustment infinitely variable max. weldable rod electrode 4 mm Ø Cooling inverter by built-in fan Design: portable assembly system, fuse 16 amps, dimensions: L x W x H: 310 x 120 x 220 mm, weight: 4 kg Age approx. 5 years Condition workshop-tested, like new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece electrode cable 1 piece ground cable 1 pair of welding gloves with cuff 1 piece slag hammer heavy design 1 piece steel wire brush 2-row 25 rod electrodes 25 rod electrodes Warranty 12 months from the date of delivery Original price €750.00 + VAT :: Price cp ...

Reference ID: PP-35200 Category Flatbed Die Cutter Manufacturer: Heidelberg Model Promatrix 106 CS Year Built 2021 Speed 8000 sheets/h Max. Size 760×1,060 mm Min. Size 300×350 mm Condition Very Good Location Europe Availability December 2023 Machine Description Processing of cardboard up to 2,000 g/m² Stripping Station 1. Register system 2. Integrated quick release systems for everyone ools (top, middle, bottom) 3. Fine adjustment of the tools Position indicators 4. Test sheet removal 5. Electronic sheet monitoring 6. Preparation table (option) Tray (CS only) 1. Non-stop roll cloth 2. Pneumatic flap for 3. Test sheet removal 4. Sheet format setting with 5. Position indicators 6. Motorized brake brush 7. Braking force adjustment 8. Strip insertion device (option) 9. Gripper edge separation (option) Non-stop investor 1. Suction head for paper, cardboard  ...

Machine type: MIG/MAG welding system Make: Werner Type Wemag 300 K-1 Connection voltage 3 x 400 volts Setting range 40 - 300 amps Duty cycle 60 % d.c. at 300 amps 100% d.c. at 230 amps Current setting 21 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile industrial plant Wire feed gearbox toothed 4-roller gearbox Fuse 32 amps Dimensions L x W x H 1100 x 420 x 720 mm Weight 135 kg Age: 32 Years Optional accessories 2-stroke / 4-stroke Condition workshop-tested, good, incl. UVV workshop test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece of pressure reducer argon with 2 pressure gauges 1 piece welding wire D-300, 5 kg 1 piece of welding gloves with cuff 1 piece spare parts box cpl. Equipped 1 piec ...

Machine Type: Pulse-Arc Welding Machine Brand: Merkle Type HighPULSE 454 DW Special Edition: Light Grey, RAL 7035 Connection voltage 3 x 400 Volt Adjustment range 20 – 450 amps Duty cycle 50% ED at 450 amps 60% ED at 400 amps 100% ED at 330 amps Infinitely variable current adjustment Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Optional equipment ✔ Connection cable to the DV device, 5 mtr. ✔ Slewing ring to the DV device ✔ Mobile wire feeder ✔ Standard control panel in DV box ✔ Lockable cover flap for control panel in DV box ✔ Filter attachment Wire feeder 4-roller drive DV 31 Fuse protection 32 amps Dimensions L x W x H 1,100 x 490 mm x 1,200 mm Weight 140 kg Age 7 years Condition workshop-tested, very good, incl. UVV test report Scope ...

Machine Type: Pulse-Arc Welding Machine Brand: Merkle Type HighPULSE 454 DW Special Edition: Light Grey, RAL 7035 Connection voltage 3 x 400 Volt Adjustment range 20 – 450 amps Duty cycle 50% ED at 450 amps 60% ED at 400 amps 100% ED at 330 amps Infinitely variable current adjustment Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Optional equipment ✔ Connection cable to the DV device, 5 mtr. ✔ Slewing ring to the DV device ✔ Mobile wire feeder ✔ Standard control panel in DV box ✔ Lockable cover flap for control panel in DV box ✔ Filter attachment Wire feeder 4-roller drive DV 26 Fuse protection 32 amps Dimensions L x W x H 1,100 x 490 mm x 1,200 mm Weight 140 kg Age 7 years Condition workshop-tested, very good, incl. UVV test report Scope ...

Machine type: MIG/MAG welding system Make Oerlikon Type Minicito 304 Connection voltage 3 x 400 Volt Adjustment range 35 – 300 amps Duty cycle 35% ED at 300 amps 60% ED at 230 amps 100% ED at 180 amps Current setting: 14 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder toothed 4-roller gearbox Fuse protection 16 amps Dimensions L x W x H 950 x 400 x 820 mm Weight 80 kg Age approx. 15 years Condition workshop-tested, good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece of ground cable 1 piece pressure reducer 1 roll of welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece of hand shield 1 piece of protective glass 10 DIN 1 piece of glass attachment white 1 spare  ...

Inv. Num. : 6978 Type: P4-2220 Producer: Salvagnini Created: 2003 Parameters: Switch-on hours: 66,600 h Compressive force: 220 t Maximum bending length: 2250 mm Max. bending height: 203 mm Maximum sheet thickness (mild steel): 2 mm Maximum sheet thickness (stainless steel): 1.2 mm Maximum sheet thickness (aluminum): 3 mm Equipment: Tools 2023 New hydraulic motor on ADP New valves on ADP New temperature sensor ADP Customization RIP Customization Adjusting the stop on the X and Z axes 2020 Replacement of the lower bending knife on P4 2220 Pressure test and replacement of 3 x oscillating cylinders Pressure test Upper bending of oscillating cylinders Regulation of the upper bending blade Adjustment of the lower bending blade Replacement of the cables on the left side of the valves and on the right side 3A1-AH 6 2019 Rotator Adjustment Replace ...

Machine type: MIG/MAG welding system Make MERKLE Type OptiMIG 351 DW Plant no.: 129.187 Connection voltage 3 x 400 Volt Adjustment range 25 - 350 amps Duty cycle 60% ED at 350 amps 100% ED at 300 amps Current Adjustment 28 Switching Levels Cooling transformer by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Wire Feed Gearbox 4-Roller Gearbox DV 26 Fuse protection 32 amps Dimensions L x W x H 990 x 510 x 1,135 mm Weight 210 kg Optional Accessories Volt and Ampere Digital Display Automatic wiring Age 24 months Condition workshop-tested, like new, incl. UVV workshop test report Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece of ground cable 4 mtr. long, 70 sq mm 1 piece of pressure reducer argon with 2 pressure gauges 1  ...

Machine type: MIG/MAG welding system Make MERKLE Type OptiMIG 351 DW Plant no.: 123.585 Connection voltage 3 x 400 Volt Adjustment range 25 - 350 amps Duty cycle 60% ED at 350 amps 100% ED at 300 amps Current Adjustment 28 Switching Levels Cooling transformer by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Wire Feed Gearbox 4-Roller Gearbox DV 26 Fuse protection 32 amps Dimensions L x W x H 990 x 510 x 1,135 mm Weight 210 kg Optional Accessories Volt and Ampere Digital Display Automatic wiring Age 4 years Condition workshop-tested, very good, incl. UVV workshop test report Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece of ground cable 4 mtr. long, 70 sq mm 1 piece of pressure reducer argon with 2 pressure gauges 1 p ...

Machine Type: Pulse-Arc Inverter Welding Machine Make MERKLE Type HighPULSE touch 450 DW Plant no.: 125.127 Connection voltage 3 x 400 Volt Adjustment range 20 – 450 amps Duty cycle 60% ED at 450 amps 100% ED at 360 amps Infinitely variable current adjustment Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case and 1.6 mtr. long VB cable Wire feeder 4-roller drive DV 31, speedometer motor Fuse protection 32 amps Dimensions L x W x H 1,210 x 430 x 1,100 mm Weight 123 kg Age 3 years Condition workshop-tested, like new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 504 W, 3 mtr. long 1 piece of ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll of welding wire 0.8 mm, D-300, 5 ...

Hardness tester, hardness measuring machine, hardness tester, hardness tester, impact hardness tester, hardness comparison plate, test block, calibration and adjustment plate -Manufacturer: SiB, hardness reference block test block -Type: 199HBW 5/750 -Dimension box: 180/170/H35 mm -Weight: 1.4 kg

Tool holder, milling holder, milling tool, test mandrel -Test pin: Ø 50 mm, with tip -Adjustment: SK50 -Dimensions: Ø 97 x 350 mm -Weight: 5.3 kg

SPIRAL KEADER Dough Machine Dough Kneader Spiral Kneader by BOKU SK 120 AK SPIRAL KNEADER from BOKU SK 120, boilers is made of STAINLESS STEEL, used condition see photos ,as returned by the customer. Inspection test run is possible. Condition: see original pictures Decorative items are not included in the scope of services. The device is fully functional. Viewing and test run is possible at any time in Gochsheim. Dispatch: Within Germany 2-4 working days Within the EU(European Union) 2-8 business days Pick-up: Gochsheim warehouse. Opening hours: Monday to Saturday from 8am to 6pm Contacts for personal arrangements: Mr. Avanesyan +49 176 56358605, Mr. Oswald +49 176 31598402

pressure: 060 t throat: 280 mm stroke: 140 mm table-size: 750 x 520 mm Strole of rum/minute: 100 ram adjustable: 55 mm stroke adjustable from - to: 10 - 140 mm mould space: 340 mm hole in the table: 230 x 175 mm table adjustable: 220 mm tool hole in ram: 40 mm total power requirement: 2,95 kW weight of the machine ca.: 2,8 t dimensions of the machine ca.: 1,5 x 1,2 x 2,4 m Condition: ready for operation: Video(s) available on our website.: Electric 380 Volt: Foot switch: adjustable table: Single column eccentric press with rotary wedge coupling, adjustable table, stroke + ram and flywheel drive. Approved only for safe tools and solid ones shields! Last test according to the test report July 2022: Everything is OK. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fully mechanical overhauled skimmer / cream separator for milk. Self cleaning. Designed for continuous operation and CIP. Separator comes with a frame with hood, bowl, motor (25 kW) and motor cover., Separator has been be fully stripped down. All steel parts are sandblasted and repainted. All stainless steel parts are cleaned/polished. All gaskets and bearings are renewed with original Alfa Laval service kit parts. Axles and tooth wheels are checked and if needed replaced. Bowl is checked and not needed to balance because it was within the limits on vibration level. Motor is reconditioned., Test run and balance check done at the test station. Video for proof can be sent on request., Excluding:, - Service tools for maintenance., - Control panel / controls / cabling., - Base frame., - Water valves., - Water control box., Type of Machine: Cream Separator / Skimmer, Capacity: 15.000 liter pe ...

Used Automatic Microfilter Innotec 1997 INTEC MICROFILTER NOW INNOTEC Automatic Microfilter year 1997 CE marked INNOTEC on SKID dimensions 3 7m x 1 5m Process speed at 10 000 bottles h controlled with litre counter 3 Housings of microfiltration 12 candles 30 and one of 40 Connection code 7 2 Housings for water filtration for rinsers and washes with 5 candles 30 connection code 7 Siemens S7 PLC with network card for remote control with VPN expandable because it was replaced with a more powerful one because it was full new operator panel Bubble test with automatic drains and TEST OK report in order to have the machine ready to start in the morning Steam inlet to sterilize the filler with automatic valve and inserted in the cycles that can be modified Weekly programming of washing starts production cycles sanitization sterilization membrane washing all modifiable Automatic DOSATRON pumps fo ...

Spiral mixer Memak Otto 100 Robust, powerful and quiet dough mixer. Made of steel. The precise and simple mechanical construction ensures maximum durability and minimum maintenance of this spiral dough mixer. The power transmission system with BELT makes this device the quietest of its type. The special shape of the spiral and the rotation speed of the spiral synchronized with the rotation speed of the bowl brings the dough together in a few minutes and gives a larger volume and an airy structure to the dough. Thanks to the solid body, these spiral mixers are suitable for use in small bakeries and for well-hydrated dough mixtures. These machines provide an excellent test result and practically do not require maintenance. Standard features: • Spiral mixer with fixed bowl with two motors, one for the bowl and one for the spiral hook • Two speeds, two electronics • Two-way  ...

General SKU251U329 LocationGermany MakeSterling Fluid Systems Sihi TypePLG 55316 Y 42 Mach.No.40000613-20-01 Pressure Working pressure0.04 Bar Vacuum possiblecheck Main Features MaterialMild steel/Stainless steel Volume180000 Ltr. Motor15 KW Specified Features - Vacuum pump MaterialMild steel, Stainless steel Pumpcheckthis vacuum pump comes with TÜV Number of pumps:1 Capacity180m³/h With motor15 kW, 1455 rpm, 400/600 volt, (Ex) InletDN50 OutletDN100 Information Year of construction1999 Mounted on framecheck Total height2,0 m Floorspace2,9x1,7 m Weight1530 kg ATEX compatiblecheck Extra Specificationsthis vacuum pump contains: GSD tube condensor, serial 475/1998, year of construction 1999, tube heating surface 2,3 m2, design pressure 6 bar, test pressure 7,6 bar, volume 6 ltr, temp. 90ºC, Shell volume 23 ltr, design pressure 6 bar, test pressure 7,6 bar, tem ...

General SKU354T1003 LocationBarneveld MakeChemtech International Ltd Type212W and WH 35F No. CC9816-01 and CC 9816-07 Year of construction1998 Pressure Working pressure40 Bar Working pressure jacket13.8 Bar Main Features MaterialStainless steel Motor7.5 KW Surface1 m2 Specified Features - Scraped surface heat exchanger MaterialStainless steel 1.4306 (304L), Stainless steel 1.4401 (316) Scraped surface heat exchangercheck Number of stages:2 Heating surface1,03m² Heating surface shell±0,28 Heating surface rotor±0,25m² Capacity 200kg/h Cylinder sizesDia: 152x600mm Max. temperature0-195°C With jacketcheck Rotor can be cooled/heatedcheck Max. temperature0-195°C InletDia: 50mm, 38mm OutletDia: 50mm, 38mm Motor1.1kW, 400/690volt, 1465rpm With post treatment cylindercheck Heating surface±0,5m² Cylinder sizesDia: 280x570mm Motor7,5kW, 400/690Volt, 1430rpm ...

General SKU338T908 LocationBarneveld MakeBarriquand TypeDIJMASC 2X7/1X15X210X2000 No.28746 E-Pos.W555 Year of construction2010 Pressure Working pressure25 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface11.8 m2 Size length2950 mm Sizes width850 mm Specified Features - Plate heat exchanger MaterialStainless steel 1.4404 (316L), Stainless steel 1.4571 (316Ti) Plate heat exchangerscheck Heating surface11,8 m2 Capacity140 Ltr. Number of platens14 Plate sizes1980 mm ConnectionsDN 25, DN 50 (2x), DN 80 (2x) Max. temperature120 °C. Information Mounted on framecheck Total height2,95 m Weight900 kg CEcheck Floorspace0,71x0,85 m Extra SpecificationsSeite A, volume 37 Ltr., pressure -1/10 bar, test pressure 17,5 bar, temp 120 Degr. C., Seite B, volume 140 Ltr., pressure -1/25 bar, test pressure 39,6 bar, temp 120 Degr. C., :Plate heat exchanger ...