terra used for sale

Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: TER Tecno Elettrica Ravasi, Crane remote control with cable / Portable control panel for crane -Cable length: 25 m -Dimensions: 700/560/H380 mm -Weight: 18 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws -Interchangeable jaws: 3-piece soft top jaw set -Width: 30 mm -Dimensions total: 125/90/H55 mm -Total weight: 3.7 kg

Teraoka Seiko Co., LTD semi automatic weigh, wrap and labelling machine, model: AW-4600CP, serial number: 14172045, year of construction: 2014, 220-240 V, 1 Ph, 50/60 Hz, 5 A, 1.0 kW, maximum weight: 3/6 kg, minimum weight: 20 gram, e=1/2 gram, T=-2.999 kg, dimensions: 1100 mm x 1050 mm x 1500 mm.

General SKU272W407 MakeTerlet Terletherm TypeT2-6M MS No.97.0908.4 Year of construction1998 LocationBarneveld Pressure Working pressure10 Bar Working pressure jacket4 Bar Main Features MaterialStainless steel Motor11 KW Surface4.4 m2 Specified Features - Scraped surface heat exchanger MaterialStainless steel 1.4401 (316) Scraped surface heat exchangercheck Heating surface4.4m² Capacity132 l. Cylinder sizesDia. 725x1350 mm Max. temperature150°C With jacketcheck Max. temperature150°C InletDN80 OutletDN80 Motor11 kW, 415 volt Speed66 rpm Information Floorspace1,3x0,9 m Total height2,5 m Weight1400 kg CEcheck Extra SpecificationsCool-/heatings medium: water, glycol or steam. Material scrapers type: PTFE Technical specs Extra informationVolume 14/18 l., allowable temperature 150°C, pressure -1/4 bar, cooling/heating medium inlet DN50, Scraped surface hea ...

General SKU227Y123 LocationBarneveld MakeTerlet Type190 l. No.89-063 1 Pressure Working pressure3.5 Bar Vacuum possiblecheck Main Features MaterialStainless steel Motor7.5 KW Specified Features - Scraped surface heat exchanger MaterialStainless steel 1.4301 (304), Stainless steel 1.4404 (316L) Scraped surface heat exchangercheck Capacity190 l. Cylinder sizesø 570 x 1230 mm Max. temperature100 °C With jacketcheck 34 l. & 2,6 l. InletDN50 OutletDN50 Motor7,5 kW, 380—415 V Speed± 66 rpm Information Year of construction1989 Mounted on framecheck legs Floorspace1,20 x 0,90 m Total height2,40 m Weight1000 kg Extra Specifications6-arms scraperScraped surface heat exchangersNew arrivalsTerletHeat exchangers > Scraped surface heat exchangersNew arrivalsBrand > Terlet What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compare ...

Terlet Terlotherm T0-4 Scraped Surface Heat Exchangers (SSHE) for inline heating and / or cooling of liquid, viscous and high viscous products with or without whole parts (up to 25 mm), like starch preparations, soups, sauces, dairy products etc. Scrapers can be easily replaced. CIP Cleanable. Inspection without removing seal. Lid can be opened with clamps. Large heating area on limited floor area. Tangetiale inlet. Accelaration and deceleration area. No damage to the product. Maintenance friendly, only one seal and one drive. Product volume: 32 liter. Number of scraper rows: 4. Inner vessel: 0 / 10 Bar - 0 / 150 °C - 32 liter. Jacket #1: -1 / 4 Bar - 0 / 150 °C - 2,6 liter. Jacket #2: -1 / 4 Bar - 0 / 150 °C - 4,6 liter. Motor: 3 kW - n1: 1.456 rpm - i: 43,33 - n2: 34 rpm - 380/400 V - 50 Hz - 6,60 / 3,85 A. Product inlet: 50 mm. Product outlet: 50 mm. Ground clearance: ± 556 mm. Cy ...

TERMETAL T6MX2-8-750 induction furnace was built in 2004 in Poland. It is an extremely versatile machine designed for the heat treatment of metals. The machine is specially designed for the continuous, crosswise heating of S49 and S60 steel rails. It also enables the heating of metal charges of various shapes and the execution of other processes that require high power. Charges are heated by means of high-frequency current. The AC current flowing through the primary coil creates an alternating magnetic field around the charge. This field in turn induces electromagnetic forces in the secondary circuit, causing the charge to heat up. This solution makes the TERMETAL T6MX2-8-750 much more efficient and economical than other furnaces available on the market. The TERMETAL industrial furnace is distinguished by a number of high-quality components with high thermal and electrical resistance. ...

The UCC 548 is a productive and flexible high-speed model. This machine is characterized by its ability to produce a wide variety of fabric weights and designs – perfect for smaller, ever-changing markets. Thanks to its outstanding efficiency and quality, the Terrot UCC 548 has gained international recognition and is established on the market worldwide. Features: - Made in Germany: Maximum efficiency and precision for reliable production. - Flexible application options: With 1.6 feed points per inch and a speed factor of 800, production is extremely efficient and adaptable. - High-quality inserts: Integrated guides enable safe processing even with long thread runs. - Versatile technology: The machine is available with a choice of 2-way or 3-way technology in the cylinder control rail, allowing for a wide range of applications. - Great design flexibility: Two needle marks i ...

Used Blow Molding Machine Terekas up to 5L 1000 bph This used blow molding machine from Terekas, model FlexBlow 1, is designed for demanding PET bottle production, offering advanced flexibility and efficiency. With a maximum bottle capacity of up to 5 liters and a throughput of up to 1,000 bottles per hour, the system is engineered for operations that require consistent product quality across multiple neck finishes and formats. The FlexBlow 1 utilizes a linear blow molding architecture, equipped with a single cavity, making it ideal for short production runs, frequent changeovers, or pilot lines. It integrates seamlessly into existing filling and packaging lines, thanks to its modular design and compatibility with multiple container types. The preform feed system includes a tipper, unscrambler, and loader, all designed to ensure reliable, jam-free supply of preforms into the production c ...

Hello, We hereby offer you a used articulated telescopic work platform on wheels (telescopic aerial platform) from the manufacturer TEREX AERIALS, type TA30N Boom Lift. The following technical data have been taken from the manufacturer's operating instructions and brochures, for which we cannot assume any liability for accuracy and completeness. Manufacturer: TEREX AERIALS Type TA30N Boom Lift Built in 1999 Operating hours 887 hours Transport dimensions retracted 4.20 x 1.22 x 2.12 m (L x W x H) Curb weight 4800 kg Max. height of the floor of the working cage 9.14 m Max. working height 11.14 m Max. working width 5.20 m Outer turning circle 3.50 m Max. climbing ability 20 % Max. travel speed, boom retracted 4 Km/h Max. travel speed, boom extended 0.75 Km/h Safe load capacity (2 persons) 225 kg Max. noise level 70 dbs at 3m Operating Temperature Range -5°C to 40 ...

FINLAY / TEREX 390 HydraScreen, screen / screening, Deutz engine, including additional belts, German Machine, 5.150 h, year 1996

Screening machine large, Terra St used, overhauled

BRAND: TERRACUBED YEAR: 2022 MODEL: T1000 PRODUCTION HOURS: 250 APPLICATION TYPE: 3D PRINTING LOCATION: LITHUANIA MACHINE TYPE: 3D PRINTER AVAILABILITY: IMMEDIATELY CONTROL UNIT BRAND: DUET3 Technical Information CONTROL UNIT BRAND: DUET3 MODEL: MB6HC Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - BUILD VOLUME: 1X1X1M - PRINT SPEED: UP TO 1M/S - EXTRUDER FLOW: UP TO 3KG/H - LAYER HEIGHT: 0. 5-2MM - NOZZLE: 1MM, 3MM, 5MM (CURRENTLY EQUIPED WITH 3MM ) - CALIBRATION: 3 POINT TRUE BED LEVELING + 100 POINT MESH BED LEVELING - MOTION: TECNIC SERVO MOTORS AND CONTROLLERS EQUIPPED WITH WEB CAMERA FOR REMOTE INSPECTION CONTROLLER WIRELESSLY - ACCURACY: 0,05MM - ANDROID TABLET IS INCLUDED WITH THE PRINTER QUALITATIVE MACHINE BENEFITS: - MAINBOARD IS DUET3 BOARD. IT'S DETAILS ARE AS FOLLOWS: REPRAPFIRMWARE FOR DUET 3 MB6HC FIRMWARE_VERSION: ...

sell well serviced screen bucket Terra ST

AUTOMATIC COLOUR INKING MIXING KITCHEN 31 colors; for TEXTILE INDUSTRY : MAKE : TERMOCOLOR TYPE : ROT YOC : 2003 , refurbished 2012 VALVES : 6 THICKENER & 31 COLOUR, NO. OF VESSELS : 6 COMPUTERISED COLOUR DISPENSING SYSTEM & WEIGHING WITH DRUM TRANSPORTATION & STORAGE

Builder: TERRA SELECT Model: T5 Motor: PERKINS 55 kW (75 HP) Transp. Data: L. 11.150 mm x L. 2.550 mm x A. 4.050 mm Operat. Data: L. 14.100 mm x L. 6.800 mm x A. 3.900 mm Year: 2005 Working Hours: 3.200 h Hourly Production: 120 m³/h Screening: TROMMEL L. 4.500 mm x D. 2.000 mm Hopper Height: 2.820 mm Hopper Capacity: 4.40 m³ Discharge Belts: L. 4.900 mm x L. 900 mm Fuel Tank: 300 L Weight: 15.400 Kg

Pos. 9749.13 - 1 MAYER type Relanit 3.2 II, gauge 28, diameter 30, jersey open knit, 2640 needles, 96 feeders, lycra, 3+1 tracks Pos. 9750.11 - 1 MAYER type Relanit 4, gauge 28, diameter 30, jersey tubular knit, 2640 needles, 96 feeders, 3+1 tracks Pos. 9751.18 - 1 MAYER type Relanit 4, gauge 24 installed and spare cylinder gauge 28, diameter 30, jersey tubular knit, 2268 needles, 96 feeders, 3+1 tracks Pos. 9752.1 - 1 MAYER type MV4 II, gauge 20 installed and spare cylinders gauge 24 and 28, diameter 30, jersey tubular knit, 1872 needles, 96 feeders, 4 tracks Pos. 9753.8 - 1 MAYER type FLF, gauge 14, diameter 30, rib tubular knit, 2 x 1320 needles, 44 feeders, lycra, 1/1 tracks Pos. 9754.5 - 1 MAYER type MLBF, gauge 22, diameter 30, plush tubular knit, 2068 needles, 96 feeders, 4 tracks Pos. 9755.17 - 1 SANTONI type Zenit SV, gauge 28, diameter 34, jersey open knit, 29 ...

Description Brand: Terpack Model: Transport DN 450 Power supply: 400 V Installed power: 10 Kw Max reel size: 570 mm Oven dimensions: 495 x 340 x 730 mm Worktop height: 900 mm

Terex / Fermec / MF quick coupler, suitable for 700 / 800 / 900 models

General SKU381T1144 LocationBarneveld MakeTerlet No.91.0304 1 Year of construction1991 Pressure Working pressure jacket4 Bar Main Features MaterialStainless steel Volume4000 Ltr. Motor2.2 KW Specified Features - Stirring vessel MaterialStainless steel 1.4301 (304) Closed stirring vesselcheck Capacity4000 Ltr. Vessel sizesø 1700x2080 mm Manholeø 500 mm Outletø 150 mm With jacket52 Ltr. Max. temperature100 °C With paddle stirrercheck Motor2,2 kW 380-420/660-725 Volt Speed mixing shaft52 rpm Information Mounted on legscheck Floorspace1,8x1,8 m Total height2,9 m Weight1080 kgStirring vesselsTerletStirring vessels > Stirring vesselsBrand > Terlet What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The N ...

General SKU001Z004 LocationBarneveld MakeTerlet No.81 122 Year of construction1981 Main Features MaterialStainless steel Volume150 Ltr. Motor1.3 KW Specified Features - Stirring vessel MaterialStainless steel Closed stirring vessel(1x) Capacity150 Ltr Vessel sizesdia. 640x590mm, Flat bottom Dished top sidecheck With covercheck Outletdia. 25mm Max. temperature100 Degr. C. Motor0,88/1,3 KW, 380 Volt Information Mounted on legsMounted on wheels With switchcheck Floorspace1,2x0,8 M Total height1,5 M Extra Specifications- Stirrer equipped with scrapers (bottom drive) Technical specs Extra informationFlat bottomStirring vesselsTerletStirring vessels > Stirring vesselsBrand > Terlet What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect t ...

General SKU225U167 MakeTerlet No.80 645 Year of construction1980 Mounted on legscheck Pressure Working pressure0 Bar Working pressure jacket3 Bar Main Features MaterialStainless steel Volume500 Ltr. Motor2.2 KW Specified Features - Stirring vessel MaterialStainless steel 1.4401 (316), Stainless steel 1.4404 Open stirring vesselcheck Capacity500 Ltr. Vessel sizesdia. 980x900 mm Dished top sidecheck With covercheck Manholedia. 980 mm Outletdia. 47 mm With jacket27 Ltr. Max. temperature143 °C With gate type stirrercheck With paddle stirrercheck Motor1,5/2,2 kW 380 Volt Information LocationBarneveld Floorspace1,35x1,7 m Total height2,4 m Weight830 kgStirring vesselsTerletStirring vessels > Stirring vesselsBrand > Terlet What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destina ...

Lid Mold Manufactured by TERMOSTAMPI to fit Drinking Cups Ø98 mm, Age 2022, Forming mold 24 cavities (6 x 4 arrangement), 2 sets of inserts for:, Dome Lid For Cup Ø9 8mm ., Flat Lid For Cup Ø 98mm, Hole Punch Mold - Punch and Die., 24 cavities to Punch 24 holes diam.25 mm on Dome Lid., 24 cavities to Punch 24 cross cut., Steel Rule Pucning Mold :, with 24 cavities for both Dome and Flat Lid., Stacking Device:, for Domes and Flat Lids

PP-Drinking Cup Mold for ILLIG RDM75Kc, manufactured by TERMOSTAMPI, age 2022 with Inmold Forming and Trimmimg, for PP-Cups Ø98 mm dia. for the ILLIG RDM 75Kc, consists of:, 24 cavities (6 x 4 arrangement), complete with Trimming Knives, Cavity Inserts, Ejectors, Down Holders., and 4 series of inserts for the following PP drinking cups:-, 24 oz, 20 oz, 16 oz, 12/ 14 oz, Complete with Stacker Parts for the ILLIG PH75 counter/ stacker

General SKU315T1252 LocationBarneveld Main Features MaterialStainless steel Volume300 Ltr. Motor1.5 KW Specified Features - Stirring vessel MaterialStainless steel Capacity± 300 Ltr. Vessel sizesdia. 750x690 mm With covercheck Top connectionsdia. 34 mm Outletdia. 46 mm With jacketcheck With paddle stirrercheck Motorcheck 1,5 kW 380-500 Volt Speed mixing shaft10-280 rpm Stirring vessels With paddle stirrercheck Information MakeTerlet Type(unknown: missing typeplate) Mounted on legscheck With switch(as is) Floorspace1,4x1,4 m Total height1,5 m Weight570 kgStirring vesselsTerletStirring vessels > Stirring vesselsBrand > Terlet What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please vis ...

General SKU358S865 LocationBarneveld MakeTerlet (NL) Type80 ltr. No.75084 Pressure Working pressure jacket4.4 Bar Main Features MaterialStainless steel Volume65 Ltr. Motor0.66 KW Specified Features - Stirring vessel MaterialStainless steel Open stirring vesselcheck Capacity80 ltr. (nett 65 ltr) Vessel sizesdia. 395x650mm Dished bottomcheck Flat top sidecheck Manhole395x185mm Top connectionsDN25 (1x) OutletDN25 With jacket(2,88 ltr.) Max. temperature90 degr. C. With propellor stirrerTyphoon Motor0.66 kW 220/380 volt Information Year of construction1975 Floorspace1,5x0,8 M Total height2,4 M Weight240 KgStirring vesselsTerletStirring vessels > Stirring vesselsBrand > Terlet What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the ...

General SKU001Z007 MakeTerlet No.84 065 Year of construction1984 Mounted on legsVerrijdbaar Main Features MaterialStainless steel Volume150 Ltr. Motor1.5 KW Specified Features - Stirring vessel MaterialStainless steel Closed stirring vessel(1x) Capacity150 Ltr Vessel sizesdia. 640x590mm, Vlakke bodem Dished top sidecheck With covercheck Outletdia. 25mm Max. temperature100 Degr. C. Motor0,9/1,5 KW, 380 Volt Information LocationBarneveld With switchcheck Floorspace1,2x0,8 M Total height1,5 M Extra Specifications- Scraper stirrer (bottom drive) Technical specs Extra informationFlat bottomStirring vesselsTerletStirring vessels > Stirring vesselsBrand > Terlet What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneve ...

Manufacturer: Terex Finlay Model: 883 Year of Manufacture: 2010 Machine Type : Mobile heavy duty screener Operating hours: 8867 h Find more here - / Contact us at -

Dosing device for liquid nitrogen, manufacturer Terboven, type LIN-Master-SCT, year 2018, to increase the pressure of bottles / cans filled with non-carbonated beverages,, for displacement of oxygen in the headspace of filled bottles / cans, glasses., electr. operation of the valve to release the dosage,, up to 28,000 containers / h are possible (depending on the dosing time), The device is installed in such a way that the liquid nitrogen outlet of the dosing device is centered over the container. This ensures that the full cross-section of the opening can be used., Different signal detections determine the exact position of each individual container and give a corresponding release signal to the dosing head., In order to keep the outlet area dry and free of ice, there is a continuous flushing with gaseous nitrogen.

Overview  This filler and capper for products such as hand sanitizers, liquids, lotions and creams was built in 2019 by the Chinese manufacturer Terry. The machine is in its original, unused condition and is still in its original packaging. The machine has never been put into operation and is immediately available.   Technical details  Filling volume range: 20-300 ml  Bottle shape adaptation range: ø25-70 mm (For diameters of 10-25 mm, an inverse shape can be used if required. Products with a diameter over ø70 mm can use customized moulds for automated production)  Filling accuracy: 20-100 ml, ±0.5 g; 101-300 ml, ±0.5 %  Production speeds:   Products with 300 ml content ≥15 bottles/minute,   Products with 200 ml content ≥20 bottles/minute,   Products with 100 ml content ≥35 bottles/minute,   Products containing 50 ml ≥40 bottles/minute. (All figures are based o ...

General SKU010A060 MakeTerlet Zutphen No.89542 Year of construction1989 Mounted on legscheck (Mounted on wheels) Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure jacket3 Bar Main Features MaterialStainless steel Volume30 Ltr. Motor0.75 KW Specified Features - Stirring vessel Closed stirring vesselcheck Capacity30 Ltr. Vessel sizesø 400x350 mm With covercheck With jacketcheck (2 Ltr) Max. temperature143 °C With paddle stirrercheck and ribbon stirrer (exchangable mixing tool) Motor0,75 kW 380 V 1450 rpm Speed mixing shaftvariable (frequency converter) MaterialStainless steel 1.4401 (316) Information LocationBarneveld With switchgearcheck Floorspace1,4 x 1,0 m Total height1,3 m Weight200 kgDiscountStirring vesselsTerletDiscountStirring vessels > Stirring vesselsBrand > Terlet What you can expect from Foeth: -- Machine is in working condit ...

General SKU053A266 MakeTerlet Zutphen No.81 101 Year of constructionunknown Mounted on legsMounted on wheels Main Features MaterialStainless steel Volume1250 Ltr. Motor1.8 KW Specified Features - Stirring vessel Closed stirring vessel(1x) Capacity1250 Ltr Vessel sizesdia. 1200x1100mm Slope bottomConical top side Manholedia. 495mm Outletdia. 45mm With paddle stirrercheck Motor1,1/1,8 KW, 380 Volt MaterialStainless steel 1.4401 (316) Information LocationBarneveld With switchcheck Floorspace1,2x1,4 M Total height2,1 MDiscountStirring vesselsTerletDiscountStirring vessels > Stirring vesselsBrand > Terlet What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many  ...

Valve matrixes, completely mounted with switchboards, IFM proximity switches, wiring, etc.in very good condition, was in operation until March this year. Island 1 consisting of 25 pieces A-L SMP-SC spillage free mixproof valve, DN65, double seatlift and flush on lower seal, in 5x5 configuration. 37 pieces A-L SRC valves, different types, DN65 and DN50. 4 pieces A-L LKAP valves Island 2 consisting of 24 pieces A-L SMP-SC spillage free mixproof valve, DN65, double seatlift and flush on lower seal, in 6x4 configuration. 24 pieces A-L SRC valves, different types, DN65 and DN50. 5 pieces A-L LKAP valves

Press force max.:: 1.000 kN heating plates:: 500 x 500 mm electrically heated:: °C heating power:: kW piston stroke:: ca. 500 mm no. of stages:: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

20-15- Timber drying kiln (new) Type CSD-HT-BR 70 Internal dimensions (width x depth x height) 7500 x 7160 x 4100 mm External dimensions (width x depth x height) 8080 x 7760 x 5500 mm The section of the structural columns of the chamber is 160 x 70 mm Snow load for the roof is 80 Kg/m2 Wind resistance of walls 27.8 m/sec Warming with glass wool Walls ǂ100mm Roof ǂ100mm Door ǂ100mm Door: sliding type, hung on a rail Wood for drying: various Loading the drying chamber with a forklift The heating system is gas Fuel - GPL gas Maximum thermal energy (300 kW) Maximum chamber temperature 75 °C The number of fans in the chamber is 5x3kw The total capacity of the fans is 162,500 m3/hour Number of probes: 4 HT/ 8 AWM/ 2 EMC/ 2 Temperature Voltage 400 V 50 Hz Total power 17kw)

filling amount: 180 l injection pressure: 1,3 bar : 700 l/min diameter: 800 mm voltage: 400 V frequency: 50 Hz dimensions: ca. 1200x1300x1100 mm weight of the machine ca.: 300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

• Year of manufacture: 2020, • Operating hours: about 2,200 h, • Rotor: Diameter 860 mm, Width 830 mm, • Drive: Direct drive via coupling, • Crusher box: 4 impact bars, 2 impact plates, • Rear leg unit (in RS): 2.44 m × 1.2 m (8 × 4) with oversize backfeed, • Task opening: 860 mm × 720 mm, • Transport weight: approx. 30 t, • Application: concrete, asphalt, construction debris and natural stone, Task funnel, • Hopper capacity: 2.6 m³, • Task height: 3.0 m, • Width at the back: 2.0 m, • Sieve area: 1,080 × 810 mm, • Year of construction: 2020, • Operating hours: approx. 2,200 h, • Drive: Direct drive via clutch, • Crusher box: 4 strike bars, 2 impact plates, • Transport weight: approx. 30 t, • Funnel capacity: 2,6 m³, • Task height: 3,0 m, • sieve surface: 1.080 × 810 mm

PLC controller, connection module for digital electronic modules, terminal module -Manufacturer: Fanuc, Terminal I/O Basic Dual Module -Type: A03B-0823-C001 A03B-0823-C003 -Price/Sale: complete -Dimensions each: 140/130/H150 mm -Weight: 0.9 kg

NEW, Genie / Terex adapter with Euro mount, 140 kg dead weight

BIG Genie Terex adapter suitable for Manitou mount, - New product, - Year of manufacture: 2025, - Weight: ~ 150 kg, Many other adapters available for a wide variety of mounts !

Rail power supply, power supply terminal, digital input terminal, digital output terminal, bus end terminal, end terminal, potential injection terminal, supply module, power supply, injection terminal -Manufacturer: Beckhoff, end terminal -Type: KL9010 -Quantity: 1 piece available -Dimensions: 100/15/H65 mm -Weight: 0.1 kg

PTC relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter, DIN rail power supply, rail power supply, power supply terminal, digital input terminal, digital output terminal, potential feed terminal, supply module, power supply, feed terminal, bus terminal -Manufacturer: Beckhoff, 4-channel digital output terminal -Type: KL2404 -Number: 2 available -Price per piece -Dimensions: 15/70/H100 mm -Weight: 0.1kg/pcs

PTC relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter, DIN rail power supply, rail power supply, power supply terminal, digital input terminal, digital output terminal, potential feed terminal, supply module, power supply, feed terminal, bus terminal -Manufacturer: Beckhoff, 8-channel digital output terminal -Type: KL2408 -Number: 5 pieces available -Price per piece -Dimensions: 15/70/H100 mm -Weight: 0.1 kg/pc.

PTC relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter, DIN rail power supply, rail power supply, power supply terminal, digital input terminal, digital output terminal, potential feed terminal, supply module, power supply, feed terminal, bus terminal -Manufacturer: Beckhoff, 4-channel digital output terminal -Type: KL2424 -Number: 4 available -Price per piece -Dimensions: 15/67/H100 mm -Weight: 0.1kg/pcs

PTC relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter, DIN rail power supply, rail power supply, power supply terminal, digital input terminal, digital output terminal, potential feed terminal, supply module, power supply, feed terminal, bus terminal -Manufacturer: Wago, 8-channel digital output terminal -Type: 750-530 -Number: 2 available -Price per piece -Dimensions: 15/67/H100 mm -Weight: 0.1kg/pcs

PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter, DIN rail power supply, rail power supply, power supply terminal, digital input terminal, digital output terminal, potential feed terminal, supply module, power supply, feed terminal, bus terminal -Manufacturer: Wago, 4-channel digital output terminal 3 pieces -Type: 750-504 -Shipping/Price: complete -Dimensions: 70/40/H100 mm -Total weight: 0.2 kg

PTC relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter, DIN rail power supply, rail power supply, power supply terminal, digital input terminal, digital output terminal, potential injection terminal, supply module, power supply, injection terminal -Manufacturer: Beckhoff, Digital Input Terminal -Type: KL1104 -Quantity: 4 pieces available -Price: per piece -Dimensions: 15/70/H100 mm -Weight: 0.1 kg/piece

PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter, DIN rail power supply, rail power supply, power supply terminal, digital input terminal, digital output terminal, potential feed terminal, supply module, power supply, feed terminal -Manufacturer: Beckhoff, 8-channel digital input terminal -Type: KL1408 -Number: 7 pieces available -Price per piece -Dimensions: 15/70/H100 mm -Weight: 0.1kg/pcs

PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter, DIN rail power supply, rail power supply, power supply terminal, digital input terminal, digital output terminal, potential feed terminal, supply module, power supply, feed terminal -Manufacturer: Beckhoff, 8-channel digital input terminal -Type: EL1018 -Number: 7 pieces available -Price per piece -Dimensions: 15/70/H100 mm -Weight: 0.1kg/pcs

PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter, DIN rail power supply, rail power supply, power supply terminal, digital input terminal, digital output terminal, potential feed terminal, supply module, power supply, feed terminal -Manufacturer: Beckhoff, 8-channel digital input terminal -Type: KL1418 -Number: 7 pieces available -Price: per piece -Dimensions: 15/67/H100 mm -Weight: 0.1 kg/pcs