terex used for sale

Chassis with friction wheel drive for light crane system DEMAG / TEREX suitable for crane rails made of system profiles type KBK 2 and KBK II L Type: DRF 200-B14-1-43 Fabr. No: 45602019 Travel speed: approx. 40 m/min = 0.67 m/sec Motor power: 0.75 kW Mains connection: 400 volts, 50 Hz. - Drive motor DEMAG / TEREX, type ZBA 80 A2 B007 KBK 2 / KBK2L Carriage for hanging in the crane rail Roller diameter: 82 mm Track roller width: 21 mm Carriage width: 78 mm Space requirement L x W x H: 470 x 320 x 490 mm Weight: 34 kg good condition; used

FINLAY / TEREX 390 HydraScreen, screen / screening, Deutz engine, including additional belts, German Machine, 5.150 h, year 1996

ID2825 Terex-Pegson cone crusher year/Year of construction 2005 approx. 4600 hours/hours Crawler mobile cone crusher, crusher type AX868 1000 SR, with 2-deck secondary screen, oversize grain return, magnetic belt, hydr. cone adjustment Chain-mobile cone crusher, crusher type AX868 1000 SR, with 2-deck secondary screen, oversize recirculation, magnetic tape, hydr. Cone adjustment

Mobile excavator TEREX / Atlas Type TW160 Y.O.M. 2010 approx. 6,300 hrs - Hydraulic adjusting boom - Quick-change system for shovel - Gripper piping - Rear-view camera - Clearing sign (unused) available. - With Rototilt (shovel can be rotated and tilted 360 degrees. Additional grippers e.g. for setting telephone poles or lanterns. (last picture) Video can be submitted on request. The clearing sign was dismantled because the excavator was used as a two-way excavator with a rail handle (without DB approval). Mechanically very little stressed excavators. The enclosed clearing shield must be adjusted to the recording. Visually and technically good condition. Bdxbjqofbb Tires bad (can be renewed on request at an extra cost)

Wheeled excavator / material handler, Manufacturer: TEREX, Type: TM230, Year of manufacture: 2008, Fuel: Diesel, KW: 114,0, Gross vehicle weight (kg): 23,000, Read operating hours (h): 7,228, Serial no.: 230M301348, Condition: lower cab window defective, Replacement windshield supplied, Operating hours Hydraulics: 1,762 h, operating hours Driving: 4,992 h, Engine type: OSB6.7/114, Liftable driver's cab, with front and rear outriggers, all inspections/UVV/oil change last carried out by ATLAS in November 2023, with peel grab/spider ATLAS, serial no.: 555E, with electrical connection for lifting magnet, steering column/rain roof window/silencer/floor plates new

Manufacturer PPM (Made in France) Year 1991 Engine CUMMINS-LT10-C250(216PS/2100RPM) 6 Cylinder Condition Very Good Dimensions 11200x6056x4610mm/62,700 Kgs Max.Height Stackerable 14m(5th stackable) Price 58000 EUR FCA Klaipeda,Lithuania

with adjustable lower link catch hook and removable trailer coupling, hook CAT 3

Screening drums suitable for all common screening machines such as Doppstadt SM 314 / SM414 / SM518 / SM618 / SM620 / SM720 / SM 725 Terra Select T4-T7, Komptech Maxx, Mustang, Nemus , Cribus , Pronar , Terex Neuenhauser and others - Manufactured according to your specifications: - Perforation (also variable within the drum) - Square or round perforation - offset or straight - smallest webs - welded-in spiral - in various material thicknesses - Perforated plates sharp-edged in the highest quality - Perforated plates made of special steel We deliver our drums free of charge. Many models in stock without waiting.

CROCODILE SHOVEL with 2 rear hyd. Cylinders, strong double-stiffened hold-down, available in different working widths and with different mounts, Other mounts such as Atlas, Avant, Cat, Claas, Deutz Fahr, Dieci, Faucheux, Genie, Giant, Hercules/Everun, JCB, John Deere, Kramer, Liebherr, Mailleux, Manitou, Merlo, Mustang, New Holland, Paus, Schäffer, SMS, Terex, Volvo, Weidemann, Zettelmeyer also available!

NEW, opening width 1350 mm, 8 teeth, 385 kg, suitable for Kramer mounting (86.5 cm mounting width), with standard hydraulic couplings, surcharge for plug-in connectors & socket flat sealing: € 60, - net, with various mountings suitable for e.g. Euro, Bobcat , Merlo, JCB, Terex, Manitou, Schäfer, Weidemann etc. available

NEW, width 200 cm, 250 kg net weight, 0.70 m³ capacity, with Genie/Terex mount

NEW, 219 kg dead weight, 2 cylinders, with Euro mount, Also other mounts like Atlas, Avant, Bobcat, Cat, Claas, Deutz Fahr, Faucheux, Genie, Giant, Hercules/Everun, JCB, John Deere, Kramer, Liebherr, Mailleux, Manitou, Merlo, Mustang, New Holland, Paus, Schäffer, SMS, Terex, Volvo, Weidemann, Zettelmeyer available!

with Genie / Terex recording

NEW, 180 cm width, 284 kg net weight, with Euro mount, Also other recordings like Atlas, Avant, Bobcat, Cat, Claas, Deutz Fahr, Faucheux, Genie, Giant, Hercules/Everun, JCB, John Deere, Kramer, Liebherr, Mailleux, Manitou, Merlo, Mustang, New Holland, Paus, Schäffer, SMS, Terex, Volvo, Weidemann, Zettelmeyer available!

0.50 m³ capacity, 141 kg net weight, with Euro mount, also other recordings such as Atlas, Avant, Cat, Claas, Deutz Fahr, Dieci, Faucheux, Genie, Giant, Hercules/Everun, JCB, John Deere, Kramer, Liebherr, Mailleux, Manitou, Merlo, Mustang, New Holland, Paus, Schäffer, SMS, Terex, Volvo, Weidemann, Zettelmeyer available!

Heavy lift bucket 200 cm with Euro mount, Also other shots like Atlas, Avant, Bobcat, Cat, Claas, Deutz Fahr, Dieci, Faucheux, Genie, Giant, Hercules/Everun, JCB, John Deere, Kramer, Liebherr, Mailleux, Manitou, Merlo, Mustang, New Holland, Paus, Schäffer, SMS, Terex, Volvo, Weidemann, Zettelmeyer available!

NEW, 2.15 m³ capacity, 585 kg net weight, with Euro mount, Also other recordings such as Atlas, Avant, Bobcat, Cat, Claas, Deutz Fahr, Dieci, Faucheux, Genie, Giant, Hercules/Everun, JCB, John Deere, Kramer, Liebherr, Mailleux, Manitou, Merlo, Mustang, New Holland, Paus, Schäffer, SMS, Terex, Volvo, Weidemann, Zettelmeyer available!