We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,220 used machines on RESALE, but how to find them? Machine Search
used
Carpentry tenon cutting machine Schneider SK A 4 S Swivel Automatic swivel readable via a scale 90 degrees - 30 degrees ( 60 degrees ) Power current Cutting height 450 mm Cutting width 240 mm Cutting depth 360 mm Motor power 3 KW Laser Cutting Display Chassis Top Condition Functionally tested Shipping available at an additional cost
used
Tenoning machine, tenon cutting machine, tenon hunter, slot rotor, tenon cutting and slotting machine, slot and tenon milling machine -Manufacturer: Festo, tenoning and slotting machine -Type: ZA 101/S -techn. Data: see nameplates/photos -Dimensions: 1675/1545/H1330 mm -Weight: 546 kg
used
AUTOMATIC TENONER machine model BACCI TSG2T working conditions : Excellent second hand machine for production of chairs , sofa' , bedroomes , etc . volt. 380/50 with tool : Yes spindle speed rpm 6000 max. tenon width mm. 115 +2R tenon depth mm. 15 / 50 tenon thickness mm. 0 / 42 tables inclination : Yes cutter rotation motor power Hp 4 cutter revolution motor power Hp 1 net weight kgs. 1050
used
Round End tenoner Manufacturer: Pade Model: TSU Tenon width: 4-100 mm / + pin thickness Tenon thickness: 4-30 mm Tenon depth: 10-50 mm Support tables 2 pieces for reciprocal work Support tables Tiltable
used
min and max tenon width: 4-100 mm + thickness min and max tenon thickness: 4-30 mm min and max tenon depth: 6-80 mm Table adjustments: vertical: 120 mm horizontal: 60 mm front tilting: 20? scale fence on table for miter positioning: 45? cutter spindle motor: 3kw motor for drum rotation: 0,75kW rotation speed of drum adjustable
used
Max tenon width: 100 mm + thickness Max tenon thickness: 30 mm Max tenon depth: 50 mm Table adjustments: vertical: 100 mm tilt on both sides: 15?/0?/-15? front tilting: +5?/-20? guide on table for mitre positioning cutter spindle motor: 3,7 kW motor for drum rotation: 0,4 kW dust extraction: 2 x 100 mm
used
max tenon width: 115 mm + thickness min and max tenon thickness: 0-42 mm min and max tenon depth: 10-45 mm Table adjustments: vertical: 80 mm tilting upwards: 0? - 15? tilting downwards: 0? - 30? side tilting: 0? - 20? fence on table for mitre positioning cutter spindle motor: 3 kW motor for drum rotation: 0,75 kW
used
Machines for double-sided workpiece machining, especially for profiling the edges of the workpiece (postforming profiles, tongue-and-groove connections) for floor laminates and parquet) as well as for milling with large chip removal (slotted tenon connection on door and window profiles). Double-end tenon for longitudinal profiling Fabr. A. Costa 1. Vorritzer 1+1 2. Chipper (SAEGE) 1+1 3. Milling unit 1+1
used
ROUND END TENONER WITH 2 BENCHES BALESTRINI MOD. PICO CN – CE RULES - max. horizontal tenon length 160 mm - max. vertical tenon length 100 mm - max. bench inclination 20° - inclination of workpiece support guides: 45° - production: 600/700 tenons per hour - spindle Ø 25 mm - benchs: dimensions 315x360 mm longitudinal axis inclination 0° ÷ -20° piece support guide adjustment 0° ÷ 45° - Numerical Control piece support guide adjustment 0° ÷ 45° axis movements 2 DC motors brushless” X axis stroke 600 mm Y axis stroke 200 mm X, Y axis speed 15 m/min. execution of programs in quick tasks program memory 1000 pcs. programming using macros - 9000 / 12000 rpm. - cutter motor power 4 hp - volts. 380/50 - year 2012 - CE Standards
used
Double sided round end tenoner Balestrini mod. TTSA Description: Double sided round end tenoner Balestrini mod. TTSA complete with loader 1. Automatic loader 2. Control panel 3. min / max working length 240/1200 mm 4. maximum tenon size 100x30 mm 5. Capacity: 1200 tenons/hour (600 pieces/hour) 6. Tool rotation 9,000 rpm 7. Total power 6,5 kW
used
SECOND-HAND DOUBLE SIDED ROUND END TENONER BALESTRINI MOD. PRO 15 CNC - CE RULES - Working length mm. 170 – 2000 mm - Max tenon length 80 mm - Production: 1800 tenons/hour (900-1350 pieces/hour) - Tool rotation 11,000 rpm - Tenoning units motors (n.2) 8 hp (4hp each) - With loader RBF 2 -Volt. 380/50 - S/N AO.118.88 - Year 2002
used
SECOND-HAND CNC DOUBLE SIDED ROUND END TENONER BACCI TSD-E-NC14 - Working length mm. 1200 - Max tenon length 100 mm - Production: 2400 tenons/hour (1200 pieces/hour) - Tool rotation 9,000 rpm - Tenoning units motors (n.2) 8 hp (4hp each) - Touch screen NC control - With CSF loader - Safety net - S/N 800 - CE rules (year 2004)
used
SECOND-HAND ROUND END TENONER WITH 2 BENCHES BALESTRINI MOD. PICO - CE RULES - Max tenon dimensions 100x30 mm - Table tilt: max 20° - Workpiece fence max inclination 45° - Production: 600-700 tenons/hour - Tool rotation 9.000 rpm - Tenoning unit motor4hp -Volt. 380/50 - S/N F356M16 - Year 1995
used
Gebr. Tenon cutter Carpentry Abundmaschine KRÜSI ZA-66/95 YOC 1995 CE version with protective cabin Crosscut saws: Motor power: 4.0 kW 65° swivel Lateral adjustment by handwheel travel: 250 mm max. saw blade diameter: 750 mm max. cutting height: 290 mm Cutting saw – slitting unit: Motor power: 7.5 kW 45° swivel Saw blade diameter: 2 x 450 mm max. cutting depth: 175 mm Settling saws: Motor power: top 2.2 kW / bottom 2.2 kW Complete sawing unit can be swivelled forward up to 45° Additional swivel heads: swivel by +/- 45° possible max. saw blade diameter: 350 mm max. cutting depth: 125 mm Sliding table: swivel +/- 60° on both sides Laser for cutting position indication for the swivel cross-cut saws Chassis Moving trestle Extraction connection: 2 x 120 mm and 2 x 80 mm Machine dimensions measured without sliding carriage: L: 470 cm W: 135 ...
used
Tenon cutting and slitting machine Olma ZVA Counterclockwise rotation Finger pressure pneum. Fence Baumann 3500 mm Available from the end of November 2023
used
Tenoning machine, tenoning machine, tenon hammer, slot rotor, finger jointing system -Recovering rotor: 2.2 kW 5650 rpm -Socket: Ø 30 mm -Saw motor: 3.5 kW 2870 rpm -Bore heads: 0.8 kW 2820 rpm -Adjustable drilling distance: 230-560 mm -Frequency converter Perske type: 7.5DW10/2 100 Hz 7.5 kVA -Length stop -Workpiece clamping: pneumatic -pneumatic feed -Dimensions: 1520/1800/H1400 mm -Weight: 1600 kg
used
Gebr. Slotted cutter for tenon cutters Carpentry joinery machine such as KRÜSI ZA-66 or REX ZA 800 SATURN 5.109 Tool diameter: 450 Tool height: 31-60 mm Aluminum From location. No shipping!
used
SECOND-HAND DOUBLE SIDED ROUND END TENONER BACCI TYPE TSD-E - CE RULES - working length mm. 1200 - max tenon length 100 mm - production: 2400 tenons/hour (1200 pieces/hour) - tool rotation 9,000 rpm - tenoning units motors (n.2) 8 hp (4hp cad.) - with loader CSF - volt. 380/50 - sn 772 - year 2003
used
SECOND-HAND DOUBLE SIDED ROUND END TENONER BACCI TYPE TSD-E – CE RULES - working length mm. 1200 - max tenon length 100 mm - production: 2400 tenons/hour (1200 pieces/hour) - tool rotation 9,000 rpm - tenoning units motors (n.2) 8 hp (4hp cad.) - with loader CSF2 - nc ISAC - perimetral net - volt. 380/50 - year 1996
used
Description: For producing various tenon and slot connections Saw diameter: 400 mm Planing width : 200 mm packing measure approx (l x w x h): 2,500 x 2,400 x 1,800 mm, Approx. Onsite Dimension. (l x w x h): 3,000 x 2,600 x 1,800 mm, weight approx.: 1,200 kg
used
AUTOMATIC DOUBLE END TENONER Type GABBIANI TMN 56 . second hand max.opening mm. 3100 min. opening mm.160 max. useful height mm.120 variable feed rate from 4 to 18,5 mt/min Equipped with 3+3 working units - 1+1 scoring unit . motor power HP 1.3 - 1+1 hogging / milling unit . motor power HP 5,5 - 1+1 milling unit . motors power HP 5,5 volt. 380/50
used
AUTOMATIC TENONER type BALESTRINI PICO volt. 380/50 working conditions : Excellent for chairs
used
Description ID U64.2 Status Active Price 100 € + VAT Location Oradea (RO) Tenons maker. ExWorks. Price is negotiable. Contact Tel.: +40-359/175.575 Fax: +40-259/426.248 Mobil: +40-743/177.040 ; +40-740/221.698 Technical inspection can be organized at least 24 hrs before the due date We speak English. Wir sprechen Deutsch. (+40-740/221.698 ) Hablamos Español. Beszélünk magyarul. (+40-743/177.040 ) Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervam dreptul la greseli, modificari si vanzare prealabila.
used
TECHNICAL DATA: Working width max mm: 3200 Working width min mm: 200 Passage height max mm: 180 Feedrate max m/min: 4 - 24
used
machine 1: Fixed side at the left, working width 220 mm to 2500 mm Workpiece overhang max. 110 mm Electronic width adjustment Panel thickness 8 - 90 mm Top pressure by belts Rolling chain with automatic lubrication, automatic pop-up dogs every 1000 mm Feed speed 10 - 40 m/min Chain infeed taking 1,62 m. panels in front of the dogs Panel alignment at the infeed Middle support NC 30 controlls Equipment left and right: 1+1 Jump universal shaper 6 kW 1+1 Twin hogging unit, motors 6,6 kW (2 motors) 1+1 Universal shaper 6 kW 1+1 Jump universal shaper 6 kW panel turning device HOMAG TD 31/30/13 Year 1989 machine 2: Fixed side at the left, working width 220 mm to 3000 mm Workpiece overhang max. 110 mm Electronic width adjustment Panel thickness 8 - 90 mm Top pressure by belts Rolling chain with automatic lubrication, automatic pop-up dogs every 1000 mm Feed speed 8 - 40 m/min Chain infeed taking ...
used
automatic TENONER machine BALESTRINI 2TAO machine for production of parts of chairs , sofà, bedrooms , funritures . volt. 380/50
used
automatic TENONER machine BALESTRINI 2TAO machine for production of parts of chairs , sofà , bedrooms , furnitures . volt. 380/50
used
automatic TENONER machine BALESTRINI 2TAO for production of chairs , sofà , bedrooms , furnitures , etc. volt. 380/50
used
equipped with dowel drilling device; automatic table carriage with length stop; pneumatic clamping; POWER touch screen; disconnect 1st flange trouser piece; must be professionally dismantled by the buyer.
used
In working order - charging options available
used
I sell a double end cutting and milling machine FRIULMAC IDRAMAT, built in 2007. Working width up to 2500mm Configuration left side / fix: 1 + 1 pcs. cutting units top + bottom / 3.0 + 3.0 KW 1 + 1 pcs. groove saw units front + rear with jump Configuration right side / movable: 1 + 1 pcs. cutting units top + bottom / 3.0 + 3.0 KW 1 pcs. special milling unit on top / 5.5 KW Material pressure band with support from above. Special design, also suitable for side dimensioning. Continuous machine. Siemens Simantic control panel. Condition Very good. Available the same.
used
I sell a double end profiler milling machine CELASCHI TSA 280D. Working width up to 2800mm Configuration left side / fix: 1 pcs. cutting unit 4.0 KW 1 + 1 pcs. milling units top + bottom / 4.0 + 4.0 KW 1 + 1 pcs. side milling units 4.9 + 4.9 KW Configuration right side / movable: 1 pcs. cutting unit 4.0 KW 1 + 1 pcs. milling units top + bottom / 4.0 + 4.0 KW 1 + 1 pcs. side milling units 4.9 + 4.9 KW Material pressure band with support from above. Continuous machine. Combined power 47KW NA1200 Positioner. Condition Very good. Available the same.
used
Double-sided tenoning machine Helma DRP 2000 Spindle rotation speed 6400 rpm Max blank length 2000 mm Feed speed 2 m/min Power 7 kW Weight 2750 kg Overall dimentions 4000x2000x2000 mm
used
Double end tenoner Schwabedissen Type: DAa 200 Working width 1000 mm 3 motors per side: Saw 8.3 kW swivel Milling machine 4.5 kW swivel Milling machine 4.5 kW swivel Chain track with cam spacing 380 mm Lower chain projection 500 mm External dimensions 3600 mm x 2340 mm
used
Double-end tenoner Gabbiani TDA N64 (Ref. No. 509-2642) 380 V 50 Hz 92 A 49 kW Weight approx. 5500 kg Year of construction: 1979 L x W x H: 4000 x 5500 x 1700 mm The machine is in good condition, ready for operation Subject to changes, errors and prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Double slot and calibration machine 1000/1500 Herringbone parquet making machine Unique on the market, a set of machines (2 pieces) for the production of parquet - chevrons, Machines with high-precision machining
used
Double-end tenoner Torwegge Working width 3000 mm per side: 2 x shredders swivel 3.7 kW at 50 Hz/5.5 kW at 100 Hz complete with converter Chain transport with cams
used
Manufacturer: Haberkorn, Type: FZS, Year: 1996, Trimming saw: oben, Durchmesser Säge: 400, Saw kW: 3, rotations controlled: 2800, Length lifting spindle mm: 252, Diameter of the spindle mm: 40, Spindle travel range total mm: 220, Travels of spindle: 1, Milling spindle kW: 40, rotations controlled: 2800, Working stations: 2, Angular adjustment horizontally: +/- 65 °, Hauptmotor kW : 9, Wight approx. kg: 2000, Feeding - manually: yes, Mitre Window: yes, Spannsystem: 2 Druckluft-Spanner, Exhaust diameter mm: 1x100 + 1x 180, Required space L x W x H mm: 2225x1720x1835, Year :1996
used
Manufacturer: Haberkorn, Type: FZS-SD, Year: 1994, Work piece width min-max mm: oben, Min.-max. workpiece length in mm: 400, Min.-max. workpiece height in mm: 3, Trimming saw: 2800, Working hight mm: 252, Vertikal spindle: 40, Working range Z-axis mm: 220, Length lifting spindle mm: 1, Diameter of the spindle mm: 40, Trimming saw: 2800, Travels of spindle: 2, Milling spindle kW: +/- 65 °, Working length max mm: ca. 7,5 Fräswelle, Max. working depth in mm: 2000, Main engine kW: yes, Feeding speed max m/min: yes, Feeding - manually: 2 Druckluft-Spanner, Feeding speed continous adjustable: 1x100 + 1x 180, Mitre Window: 2225x1720x1835, Year :1994
used
Manufacturer: Haberkorn, Type: FZS-SD, Year: 1994, Work piece width min-max mm: oben, Min.-max. workpiece length in mm: 400, Min.-max. workpiece height in mm: 3, Trimming saw: 2800, Working hight mm: 252, Vertikal spindle: 40, Working range Z-axis mm: 220, Length lifting spindle mm: 1, Diameter of the spindle mm: 40, Trimming saw: 2800, Travels of spindle: 2, Milling spindle kW: +/- 65 °, Working length max mm: ca. 7,5 Fräswelle, Max. working depth in mm: 2000, Main engine kW: yes, Feeding speed max m/min: yes, Feeding - manually: 2 Druckluft-Spanner, Feeding speed continous adjustable: 1x100 + 1x 180, Mitre Window: 2225x1720x1835, Year :1994
used
Manufacturer: Gubisch, Type: ES 2000, Year: 1991, Control: Hand, Trimming saw: yes, Durchmesser Säge: 400, Saw kW: 3, rotations controlled: 2800, Working hight mm: 120, Vertikal spindle: yes, Working range Z-axis mm: 300, Length lifting spindle mm: 300, Diameter of the spindle mm: 50, Travels of spindle: 2 x100 mm, Milling spindle kW: 50, rotations controlled: 2800, Working stations: 1, Angular adjustment horizontally: yes, Work piece hight max mm: 120, Hauptmotor kW : 7,5, Wight approx. kg: 2000, Vorschub Stufenlos: yes, Mitre Window: yes, Year :1991
used
Manufacturer: Okoma, Type: SF 6 SA, Year: 1985, Work piece width min-max mm: 40-300, Min.-max. workpiece length in mm: 30-3000, Min.-max. workpiece height in mm: 10-100, Trimming saw: yes, Diameter of saw: 380, Saw kW: ca.2,5, rotations controlled: 4500, Working hight mm: 150, Working range Z-axis mm: 600, Length lifting spindle mm: 650, Diameter of the spindle mm: ca.50, Travels of spindle: 5, rotations controlled: 4500, Working length max mm: 3000, Work piece hight max mm: 100, Main engine kW: 7,5, Clamping system: pneumatisch, Year :1985
used
max workpiece width: 2500 mm max thickness: 150 mm Feed by chain track Top pressure by belts Equipment: 1+1 Saw motor 7,5 kW
used
Right hand machine Cut off saw, 2,2kW 2 x horizontal spindles, 2 x 2,2 kW 1 x vertical spindle with 200 mm length, 50 mm diameter, 5,5 kW Manual carriage
used
Code: 0351 Brand: CABO - ITALY Model: 3200 Automatic double end tenoner with tilting blade and scoring unit for panels, furniture, custom-made furniture, kitchens, composite materials, aluminium, acoustic panels Technical data Maximum cutting width mm 3200 Maximum cutting length mm 3200 Minimum distance between blades mm 300 Maximum cutting height mm 100 Maximum diameter of blades mm 300 Maximum diameter of scoring unit mm 200 Blades inclination 0-45° Blade motor power Hp 5 each Automatic feed carriage with variable speed Automatic opening between blades Scoring motor power Hp 1 each Pneumatic workpiece clamping Overall dimensions of assembled machine: mm 4200 x 4500 x 1200 h Overall dimensions for transport: mm 4500 x 300 x 1000 h + mm 4200 x 1100 x 1000 h Weight kg 1700
used
Tenoning machine, tenoning machine, tenoning machine, slot rotor, tenoning and slotting machine -Recovering rotor: 3 places -Length stop -Workpiece clamping -Dimensions: 1400/800/H1500 mm -Weight: 560 kg
used
Trunnion carriage from Panhans with clamping device for use on table milling machines Length of base plate approx. 1000mm Sliding distance approx. 710mm Eccentric clamps for fixing the workpieces Stop can be tilted The machine can be demonstrated by appointment at our site. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".
used
Code: 0239 Brand: SCM Model: D/80 Automatic double end tenoner with 10-groups (5+5) for furniture, doors, window frames, panels, prefabricated panels, tables, cladding, prefabricated houses, fibre cement, plexiglass and various Technical data: Working length mm 3200 Min working length on 1 track mm 75 Min working length on 2 tracks mm 150 Working height mm 180 Adjustable feed speed from 5 to 30 mt/min Heavy cast-iron structure Rubber-coated tracks Track lubrication unit Composition: Automatic scoring unit - Motor Hp 1,5 Hogging unit - Motor Hp 8/12 Automatic Spindle moulder unit - Motor Hp 6,5 - Rpm 3000/6000 - Shaft diameter mm 40 Spindle moulder unit - Motor Hp 5,5 - Rpm 3000/6000 - Shaft diameter mm 40 Spindle moulder unit - Motor Hp 7,5/9 - Rpm 3000/6000 - Shaft diameter mm 40 Overall dimensions for transport: Machine mm 4800 x 2400 x 1700 h + Shoulders (tr ...
used
Code: 0242 Brand: GABBIANI Model: MODUL/80 Automatic double end tenoner for furniture, doors, kitchens, cabinets, window frames, panels, prefabricated houses, raised floors, composite materials, and various Max working width mm 3200 Min working width mm 150 Max working height mm 180 Operating units: 1° Upper blade unit - Motor Hp 3,2 - Rpm 2900 - Suction mouth diameter mm 120 2° Lower blade unit - Motor Hp 4,5 - Rpm 2850/5700 - Suction mouth diameter mm 120 3° Spindle moulder unit - Motor Hp 7,5 - Rpm 2900/5900 - Suction mouth diameter mm 150 4° Automatic spindle moulder unit - Motor Hp 5,5 - Rpm 2900/5900 - Suction mouth diameter mm 150 5° Spindle moulder unit - Motor Hp 5,5 - Rpm 2900/5900 - Suction mouth diameter mm 150 6° Spindle moulder unit - Motor Hp 7,5 - Rpm 2900/5900 - Suction mouth diameter mm 150 Feed speed variator Automatic shoulder opening with dis ...
used
Code: 0245 Brand: SCM Model: D 80/K Automatic double end tenoner for wood, furniture, custom-made furniture, panels, doors, frames, composite materials and various Technical data: Working width mm 2500 Min working width on 1 track mm 75 Min working width on 2 tracks mm 250 Working height mm 180 Electronic variable feed speed from 3 to 18 mt/min Rubber-coated tracks Working width programmable with NC Composition: Automatic belt scoring unit applied to the direct drive unit - Rpm 5500 Hogging unit: Motor Hp 7,5 - Rpm 3000 - Suction mouth diameter mm 150 Automatic spindle moulder unit: Motor Hp 5,5/9 - Rpm 3000/6000 - Suction mouth diameter mm 120 Control panel Compressed air Bar 6 Overall dimensions mm 4100 x 2000 x 1550 h